Search Results (228)

Basalt-fiber-reinforced polymer (BFRP) composites, utilizing a natural high-performance inorganic fiber, exhibit excellent weathering resistance, including tolerance to high and low temperatures, salt fog, and acid/alkali corrosion. They also possess superior mechanical properties such as high strength and modulus, making them widely applicable in aerospace and shipbuilding. This study experimentally investigated the mechanical properties of BFRP plates under various strain rates (10⁻⁴ s⁻¹ to 10³ s⁻¹) and directions using an electronic universal testing machine and a split Hopkinson pressure bar (SHPB).The results demonstrate significant strain rate dependency and pronounced anisotropy. Based on experimental data, relationships linking the strength of BFRP composites in different directions to strain rate were established. These relationships effectively predict mechanical properties within the tested strain rate range, providing reliable data for numerical simulations and valuable support for structural design and engineering applications. The developed strain rate relationships were successfully validated through finite element simulations of low-velocity impact. Full article

Red sandstones of the Cambrian age are globally distributed and represent an important sedimentation phase during this critical time interval. Their sedimentology and geochemistry can provide key information about the sedimentation style, paleoclimatic conditions, and weathering trends during the Cambrian. In the Salt Range of Pakistan, the Khewra Sandstone constitutes the Lower Cambrian strata and consists of red–maroon sandstones with minor siltstone and shale in the basal part. Cross-bedding, graded bedding, ripple marks, parallel laminations, load casts, ball and pillows, desiccation cracks, and bioturbation are the common sedimentary features of the formation. The sandstones are fine to medium to coarse-grained with subangular to subrounded morphology and display an overall coarsening upward trend. Petrographic analysis indicates that the sandstones are sub-arkose and sub-lithic arenites, and dolomite and calcite are common cementing materials. X-ray Diffraction (XRD) analysis indicates that the main minerals in the formation are quartz, feldspars, kaolinite, illite, mica, hematite, dolomite, and calcite. Geochemical analysis indicates that SiO₂ is the major component at a range of 53.3 to 88% (averaging 70.4%), Al₂O₃ ranges from 3.1 to 19.2% (averaging 9.2%), CaO ranges from 0.4 to 25.3% (averaging 7.4%), K₂O ranges from 1.2 to 7.4% (averaging 4.8%), MgO ranges from 0.2 to 7.4% (averaging 3.5%), and Na₂O ranges from 0.1 to 0.9% (averaging 0.4%), respectively. The results of the combined proxies indicate that the sedimentation occurred in fluvial–deltaic settings under overall arid to semi-arid paleoclimatic conditions with poor to moderate chemical weathering. The Khewra Sandstone represents the red Cambrian sandstones on the NW Indian Plate margin of Gondwana and can be correlated with contemporaneous red sandstones in the USA, Europe, Africa, Iran, and Turkey (Türkiye). Full article

The worldwide agriculture industry is facing increasing problems due to rapid population increase and increasingly unfavorable weather patterns. In order to reach the projected food production targets, which are essential for guaranteeing global food security, innovative and sustainable agricultural methods must be adopted. Conventional approaches, including traditional breeding procedures, often cannot handle the complex and simultaneous effects of biotic pressures such as pest infestations, disease attacks, and nutritional imbalances, as well as abiotic stresses including heat, salt, drought, and heavy metal toxicity. Applying phytohormonal approaches, particularly those involving hormonal crosstalk, presents a viable way to increase crop resilience in this context. Abscisic acid (ABA), gibberellins (GAs), auxin, cytokinins, salicylic acid (SA), jasmonic acid (JA), ethylene, and GA are among the plant hormones that control plant stress responses. In order to precisely respond to a range of environmental stimuli, these hormones allow plants to control gene expression, signal transduction, and physiological adaptation through intricate networks of antagonistic and constructive interactions. This review focuses on how the principal hormonal signaling pathways (in particular, ABA-ET, ABA-JA, JA-SA, and ABA-auxin) intricately interact and how they affect the plant stress response. For example, ABA-driven drought tolerance controls immunological responses and stomatal behavior through antagonistic interactions with ET and SA, while using SnRK2 kinases to activate genes that react to stress. Similarly, the transcription factor MYC2 is an essential node in ABA–JA crosstalk and mediates the integration of defense and drought signals. Plants’ complex hormonal crosstalk networks are an example of a precisely calibrated regulatory system that strikes a balance between growth and abiotic stress adaptation. ABA, JA, SA, ethylene, auxin, cytokinin, GA, and BR are examples of central nodes that interact dynamically and context-specifically to modify signal transduction, rewire gene expression, and change physiological outcomes. To engineer stress-resilient crops in the face of shifting environmental challenges, a systems-level view of these pathways is provided by a combination of enrichment analyses and STRING-based interaction mapping. These hormonal interactions are directly related to the United Nations Sustainable Development Goals (SDGs), particularly SDGs 2 (Zero Hunger), 12 (Responsible Consumption and Production), and 13 (Climate Action). This review emphasizes the potential of biotechnologies to use hormone signaling to improve agricultural performance and sustainability by uncovering the molecular foundations of hormonal crosstalk. Increasing our understanding of these pathways presents a strategic opportunity to increase crop resilience, reduce environmental degradation, and secure food systems in the face of increasing climate unpredictability. Full article

Weathering steel (WS) is widely used in bridge construction due to its high corrosion resistance, durability, and low maintenance requirements. This paper reviews the performance of WS bridges in Canadian climates, focusing on the formation of protective patina, influencing factors, and long-term maintenance strategies. The protective patina, composed of stable iron oxyhydroxides, develops over time under favorable wet–dry cycles but can be disrupted by environmental aggressors such as chlorides, sulfur dioxide, and prolonged moisture exposure. Key alloying elements like Cu, Cr, Ni, and Nb enhance corrosion resistance, while design considerations—such as drainage optimization and avoidance of crevices—are critical for performance. The study highlights the vulnerability of WS bridges to microenvironments, including de-icing salt exposure, coastal humidity, and debris accumulation. Regular inspections and maintenance, such as debris removal, drainage system upkeep, and targeted cleaning, are essential to mitigate corrosion risks. Climate change exacerbates challenges, with rising temperatures, altered precipitation patterns, and ocean acidification accelerating corrosion in coastal regions. Future research directions include optimizing WS compositions with advanced alloys (e.g., rare earth elements) and integrating climate-resilient design practices. This review highlights the need for a holistic approach combining material science, proactive maintenance, and adaptive design to ensure the longevity of WS bridges in evolving environmental conditions. Full article

In agricultural practice, in addition to determining the nitrogen (N_f) dose, it is necessary to effectively control its effect on currently grown crops. Meeting these conditions requires not only the use of phosphorus (P) and potassium (K), but also nutrients such as magnesium (Mg) and sulfur (S). This hypothesis was verified in a single-factor field experiment with winter wheat (WW) carried out in the 2015/2016, 2016/2017, and 2017/2018 growing seasons. The experiment consisted of seven variants: absolute control (AC), NP, NPK-MOP (K as Muriate of Potash), NPK-MOP+Ki (Kieserite), NPK-KK (K as Korn–Kali), NPK-KK+Ki, and NPK-KK+Ki+ES (Epsom Salt). The use of K as MOP increased grain yield (GY) by 6.3% compared to NP. In the NPK-KK variant, GY was 13% (+0.84 t ha⁻¹) higher compared to NP. Moreover, GYs in this fertilization variant (FV) were stable over the years (coefficient of variation, CV = 9.4%). In NPK-KK+Ki+ES, the yield increase was the highest and mounted to 17.2% compared to NP, but the variability over the years was also the highest (CV ≈ 20%). The amount of N in grain N (GN) increased progressively from 4% for NPK-MOP to 15% for NPK-KK and 25% for NPK-KK+Ki+ES in comparison to NP. The nitrogen harvest index was highly stable, achieving 72.6 ± 3.1%. All analyzed NUE indices showed a significant response to FVs. The PFP-N_f (partial factor productivity of N_f) indices increased on NPK-MOP by 5.8%, NPK-KK by 12.9%, and NPK-KK+Ki+ES by 17.9% compared to NP. The corresponding N_f recovery of N_f in wheat grain was 47.2%, 55.9%, and 64.4%, but its total recovery by wheat (grain + straw) was 67%, 74.5%, and 87.2%, respectively. In terms of the theoretical and practical value of the tested indexes, two indices, namely, NUP (nitrogen unit productivity) and NUA (nitrogen unit accumulation), proved to be the most useful. From the farmer’s production strategy, FV with K applied in the form of Korn–Kali proved to be the most stable option due to high and stable yield, regardless of weather conditions. The increase in the number of nutritional factors optimizing the action of nitrogen in winter wheat caused the phenomenon known as the “scissors effect”. This phenomenon manifested itself in a progressive increase in nitrogen unit productivity (NUP) combined with a regressive trend in unit nitrogen accumulation (NUA) in the grain versus the balance of soil available Mg (Mg_b). The studies clearly showed that obtaining grain that met the milling requirements was recorded only for NUA above 22 kg N t⁻¹ grain. This was possible only with the most intensive Mg treatment (NPK-KK+Ki and NPK-KK+Ki+ES). The study clearly showed that three of the six FVs fully met the three basic conditions for sustainable crop production: (i) stabilization and even an increase in grain yield; (ii) a decrease in the mass of inorganic N in the soil at harvest, potentially susceptible to leaching; and (iii) stabilization of the soil fertility of P, K, and Mg. Full article

Superhydrophobic coatings possess distinct wettability characteristics and hold significant potential in metal corrosion protection and underwater drag reduction. However, their practical application is often hindered by poor durability arising from the fragility of their micro/nanostructured surface roughness. In this study, a durable superhydrophobic coating featuring a hierarchical, hydrangea-like micro/nanostructure was successfully fabricated on an aluminum alloy substrate via a simple one-step cold-spraying technique. The coating consisted of hydrangea-shaped SiO₂ nanoparticles modified with 1H,1H,2H,2H-perfluorodecyltrimethoxysilane (PFDT) to produce multiscale roughness, while epoxy resin (EP) served as the binding matrix to enhance mechanical integrity. The hydrangea-like SiO₂ nanostructures were characterized by solid cores and wrinkled, petal-like outgrowths. This unique morphology not only increased the surface roughness but also provided more active sites for air entrapment, thereby enhancing the coating’s overall performance. The h-SiO₂@PFDT-EP composite coating exhibited excellent superhydrophobicity, with a WCA of 170.1° ± 0.8° and a SA of 2.7° ± 0.5°. Durability was evaluated through sandpaper abrasion, tape peeling, acid and alkali immersion, artificial weathering, and salt spray tests. The results demonstrated that the coating retained stable superhydrophobic performance under various environmental stresses. Compared with bare 6061 aluminum and EP coatings, its corrosion current density was reduced by four and three orders of magnitude, respectively. Furthermore, the coating achieved a maximum drag-reduction rate of 31.01% within a velocity range of 1.31–7.86 m/s. The coating also displayed excellent self-cleaning properties. Owing to its outstanding durability, corrosion resistance, and drag-reducing capability, this one-step fabricated superhydrophobic coating showed great promise for applications in marine engineering and defense. Full article

Aminotris(methylene phosphonic acid) (ATMP) and poly(acrylic acid) sodium salt (PAA) have shown favorable results in the treatment of porous building materials against weathering damage, showing promising potential as mixed-in additives during the production of lime-based mortars. This study investigates the impact of these additives on microstructure and mechanical properties. Additives were introduced in various concentrations to assess their influence on CaCO₃ crystallization, porosity, strength, and carbonation behavior. Results revealed significant modifications in the morphology of CaCO₃ precipitates, showing evidence of nanostructured CaCO₃ aggregates and vaterite stabilization, thus indicating a non-classical crystallization pathway through the formation of amorphous CaCO₃ phase(s), facilitated by organic occlusions. These nanostructural changes, resembling biomimetic calcitic precipitates enhanced mechanical performance by enabling plastic deformation and intergranular bridging. Increased porosity and pore connectivity facilitated CO₂ diffusion towards the mortar matrix, contributing to strength development over time. However, high additive concentrations resulted in poor mechanical performance due to the excessive air entrainment capabilities of short-length polymers. Overall, this study demonstrates that the optimized dosages of ATMP and PAA can significantly enhance the durability and mechanical performance of lime-based mortars and suggests a promising alternative for the tailored manufacturing of highly compatible and durable materials for both the restoration of cultural heritage and modern sustainable construction. Full article

To investigate the corrosion resistance of 60Si2MnA spring steel coated with Zn-Al in a domestic atmospheric environment containing harmful salts, the corrosion environmental factors (temperature, humidity, deposited salts, and pH) were obtained through field research. The deliquescence and weathering behavior of harmful salts were studied using impedance methods to establish their characteristic curves. Additionally, a self-designed salt deposition test apparatus was employed to conduct accelerated atmospheric corrosion tests under constant salt deposition (10 g/m²) and controlled temperature and humidity conditions (20 °C/75% RH and 40 °C/75% RH) over different corrosion periods. The results show that noticeable red rust appeared on the samples after one month of corrosion. As the temperature increased, the consumption of the coating accelerated. XRD and Raman analyses reveal that the main corrosion products of the coating materials were ZnO, Zn(OH)₂, and Zn₅(CO₃)₂(OH)₆, while the red rust primarily consisted of iron oxides and hydroxides. In the early stages of corrosion, the self-corrosion current density was relatively low due to the protective effects of the coating and the corrosion product layer, indicating good corrosion resistance. However, in the later stages, the integrity of the coating and the corrosion product layer deteriorated, leading to a significant increase in the self-corrosion current density and a decline in corrosion resistance. This study provides a data foundation for understanding the corrosion behavior of Zn-Al-coated spring steel in atmospheric environments and offers theoretical insights for developing more corrosion-resistant coatings and optimizing anti-corrosion measures. Full article

The crystallization of soluble salts is one of the most significant agents of deterioration affecting porous building materials in historical architecture. This process not only compromises the physical integrity of the materials but also results in considerable aesthetic, structural, and economic consequences. Soluble salts involved in these processes may originate from geogenic sources—including soil leachate, marine aerosols, and the natural weathering of parent rocks—or from anthropogenic factors such as air pollution, wastewater infiltration, and the use of incompatible restoration materials. This study examines the role of capillary rise as a primary mechanism responsible for the vertical migration of saline solutions from the soil profile into historic masonry structures, especially those constructed with calcareous stones. It describes how water retained or sustained within the soil matrix ascends via capillarity, carrying dissolved salts that eventually crystallize within the pore network of the stone. This phenomenon leads to a variety of damage types, ranging from superficial staining and efflorescence to more severe forms such as subflorescence, microfracturing, and progressive mass loss. By adopting a multidisciplinary approach that integrates concepts and methods from soil physics, hydrology, petrophysics, and conservation science, this paper examines the mechanisms that govern saline water movement, salt precipitation patterns, and their cumulative effects on stone durability. It highlights the influence of key variables such as soil texture and structure, matric potential, hydraulic conductivity, climatic conditions, and stone porosity on the severity and progression of deterioration. This paper also addresses regional considerations by focusing on the context of Spain, which holds one of the highest concentrations of World Heritage Sites globally and where many monuments are constructed from vulnerable calcareous materials such as fossiliferous calcarenites and marly limestones. Special attention is given to the types of salts most commonly encountered in Spanish soils—particularly chlorides and sulfates—and their thermodynamic behavior under fluctuating environmental conditions. Ultimately, this study underscores the pressing need for integrated, preventive conservation strategies. These include the implementation of drainage systems, capillary barriers, and the use of compatible materials in restoration, as well as the application of non-destructive diagnostic techniques such as electrical resistivity tomography and hyperspectral imaging. Understanding the interplay between soil moisture dynamics, salt crystallization, and material degradation is essential for safeguarding the cultural and structural value of historic buildings in the face of ongoing environmental challenges and climate variability. Full article

This study investigated the distribution and source of heavy metals and dispersed elements in the high-salinity brine of Qarhan Salt Lake. The brine with an average total dissolved solid content of 332.22 g/L, dominated by Cl⁻ (216.41 g/L) and Mg²⁺ (44.76 g/L), indicated strong evaporation and dolomite dissolution. As (6.57 ± 3.59 μg/L) and Hg (0.48 ± 0.14 μg/L) showed uniform distribution while Li (69.66 mg/L), B₂O₃ (317.80 mg/L), and Zn (5.69 mg/L) were highly enriched, highlighting the resource potential and geochemical complexity. Correlation analysis revealed that water–rock interaction played a key role in element differentiation, with Sr and Ca²⁺/Cl⁻ showing strong positive correlations (r = 0.693/0.768), reflecting isomorphic substitution and dissolution. Meanwhile, Na⁺ and Mg²⁺/Ca²⁺ showed negative correlations (r = −0.732/−0.889), suggesting cation exchange and gypsum precipitation. The self-organizing map yielded four clusters of elements and positive matrix factorization model identified four sources; the elements in the Salt Lake brine mainly came from the river water supply, weathering and leaching of minerals, and dissolution of salt-bearing layers and were locally influenced by human activities. The research provided valuable insights for future sustainable development and the environmental protection of the region. Full article

Asphalt binder aging under natural exposure critically determines pavement durability, though current research inadequately captured performance evolution across diverse regional climates. This study investigated climate-driven degradation mechanisms through 12-month all-weather aging (AWA) tests in Gansu, Shandong, and Beijing via rheological (G-R parameter, stiffness modulus S-value) and chemical analyses (carbonyl index I_C=O, sulfoxide index I_S=O). The results demonstrated significant region-dependent aging disparities beyond laboratory simulation. In Gansu, extreme thermal fluctuations and UV radiation accelerated hardening via thermal stress cycles and photo-oxidation, yielding 52.4% higher G-R parameter than PAV. In Shandong, humid saline environments triggered sulfur oxidation-driven electrochemical corrosion, increasing I_S=O by 4.2% compared to PAV. In Beijing, synergistic UV–thermal oxidation elevated I_C=O and S-value by 8% and 40.7%, respectively versus PAV. Critically, I_C=O exhibited strong positive correlations with rheological degradation across regions (r > 0.90, p < 0.01). Based on I_C=O, the 12-month all-weather aging rate in Beijing exceeded Gansu and Shandong by 18.5% and 68%, revealing UV–thermal coupling as the most severe degradation pattern. Novelty lies in quantifying region-specific multi-factor coupling effects (UV–thermal, hygrothermal–salt, etc.) and demonstrating their superior severity over PAV (Beijing > Gansu > Shandong). Dominant environmental factors showed distinct regional variations: UV radiation and temperature difference dominated in Gansu (I_C=O, r = 0.76) and Beijing (0.74), while precipitation—I_C=O correlation prevailed in Shandong (0.76), yet multi-factor coupling ultimately governed aging. These findings provide theoretical foundations for region-tailored and climate-resilient asphalt pavement design. Full article

The aim of the conducted research was to assess the impact of gypsum deposit development on changes in the radiation levels of the abiotic components of the environment. For this purpose, a study of the radioactivity of water, bottom sediment, soil, gypsum and loam samples was performed. Ground-based studies of the distribution of the values of the ambient dose equivalent rate of gamma radiation and radon flux density were also carried out. It was shown that due to the high solubility of gypsum, the degree of karstification of the territory increases under the influence of meteoric waters, and as a result of the intensification of anthropogenic impact, the degree of chemical weathering of rocks increases. This leads to a coordinated change in not only the chemical but also the radiation conditions. In particular, radioactive contamination of quarry waters and areas of increased radon flux density in soil air were established. In bottom sediments, the significant correlations of ¹³⁷Cs, ²³⁸U and ²³⁴U activity concentrations with carbonates, organic matter and soluble salts contents, as well as Fe, Zn, Cu, Cr, Pb, Ni, Mo, Cd, Co, Ti and V, indicate a significant role of the anthropogenic factor in the accumulation in bottom sediments. This factor is associated with both regional atmospheric transport (¹³⁷Cs) and the activity of the mining enterprise in the study area (²³⁸U and ²³⁴U). Full article

This study examined groundwater dynamics under saline–alkali improvement measures in a 3.66 × 10⁷ m² study area in Wuyuan County, Hetao Irrigation District, where agricultural sustainability is constrained by soil salinization. This work investigated the spatiotemporal evolution patterns and influencing factors of the groundwater environment in the context of soil salinity–alkalinity improvement, as well as the impact of irrigation on the ionic characteristics of groundwater. Furthermore, based on this analysis, a groundwater numerical model and a prediction model for the study area were developed using Visual MODFLOW Flex 6.1 software to forecast the future groundwater levels in the study area and evaluate the effects of varying irrigation scenarios on these levels. The key findings are as follows: (1) The groundwater depth stabilized at 1.63 ± 0.15 m (0.4 m increase) post-improvement measures, maintaining equilibrium under current irrigation but increasing with reductions in water supply. The groundwater salinity increased by 0.59–1.2 g/L across the crop growth period. (2) Spring irrigation raised the groundwater total dissolved solids by 15.6%, as influenced by rock weathering (38.2%), evaporation (31.5%), and cation exchange (30.3%). (3) Maintaining current irrigation systems and planting structures could stabilize groundwater levels at 1.60–1.65 m over the next decade, confirming the sustainable hydrological effects of soil improvement measures. Reducing irrigation to 80% of the current water supply of the Yellow River enables groundwater level stabilization (2.05 ± 0.12 m burial depth) within 5–7 years. This approach decreases river water dependency by 20% while boosting crop water efficiency by 18.7% and reducing root zone salt stress by 32.4%. Full article

(1) Background: this article focuses on the durability decline problem of rammed earth buildings in Paishan Village, Zhuhai City under the influence of complex environments. It aims to reveal the erosion mechanisms of rammed earth walls caused by different environmental factors (acid rain, salt spray, humidity, biological activities, etc.), and provide a scientific basis for formulating targeted remediation strategies. (2) Methods: a technical framework combining macroscopic investigation and microscopic analysis was adopted. Ion chromatography, scanning electron microscopy (SEM), and characterization (XRD) were used to study the damage to buildings in Paishan Village under the influence of different environmental factors. (3) Results: The acid rain and sulfate buildup could cause cracks and peeling on the south wall of the rammed earth wall. Salt spray and high humidity conditions exacerbated surface weathering on the west wall. Vibrant biological activity and high humidity made the north wall’s minerals easily dissolve, leaving the structure loose. The east wall was affected by the changing dynamics of carbonate rocks, which made it more vulnerable to weathering. (4) Conclusion: according to the analysis of different walls, specific steps should be taken during future restoration to improve the durability of rammed-earth buildings. Full article

The study investigates the process of intensifying rare earth elements (REEs) group uncovering from the Kundybay deposit (Northern Kazakhstan). Currently, there is no interest in extracting REEs because the ore lying beneath is significantly richer in both rare elements and REEs. However, this type of raw material is a potential source of REEs. The total content of all REEs in the weathering crust is 372.7 ppm; of these, 82.6% are Sc, Y, La, Ce, and Nd, which are present in the form of complex salts and native minerals. In order to find the optimal REE group leaching mode, the influence of the L/S ratio, temperature, acid concentration in the leaching solution, leaching kinetics, and the influence of adding HF and Na₂S₂O₅ on process efficiency were studied. The optimal conditions for REE leaching are as follows: L/S-20, T = 70 °C, t = 180 min. The maximum REE extraction yields, %: Sc-70.84; Y-90.2; La-99.8; Ce-99.24; Nd-97.98. The leaching process kinetic study results show that the process is managed by two steps. The activation energy differences for Sc, Y, La, Ce, and Nd, kJ/mol: 26.19, 23.83, 29.18, 11.15, and 15.13 allow to conclude that REEs in the Kundybay deposit weathering crust are in different forms. Full article