Search Results (64)

Pressure therapy combined with silicone has a significant effect on scar hyperplasia, but limitations such as long-term wearing of compression garments (CGs) can easily cause bacterial infection, cleanliness, and lifespan problems of CGs caused by the tedious operation of applying silicone. In this study, a compression garment fabric (CGF) with both inhibition of scar hyperplasia and antibacterial function was prepared. A polydimethylsiloxane (PDMS)-loaded microcapsule (PDMS-M) was prepared with chitosan quaternary ammonium salt (HACC) and sodium alginate (SA) as wall materials and PDMS as core materials by the complex coagulation method. The PDMS-Ms were finished on CGF and modified with (3-aminopropyl)triethoxysilane (APTES) to obtain PDMS-M CGF, which was further treated with HACC to produce PDMS-M-HACC CGF. X-ray Photoelectron Spectroscopy(XPS) and Fourier transform infrared spectroscopy (FTIR) analysis confirmed the formation of covalent bonding between PDMS-M and CGF. The PDMS-M CGF exhibited antibacterial rates of 94.2% against Gram-negative bacteria Escherichia coli (E. coli, AATCC 6538) and of 83.1% against Gram-positive bacteria Staphylococcus aureus (S. aureus, AATCC 25922). The antibacterial rate of PDMS-M-HACC CGF against both E. coli and S. aureus reached 99.9%, with wash durability reaching grade AA for E. coli and approaching grade A for S. aureus. The finished CGF maintained good biocompatibility and showed minimal reduction in moisture permeability compared to unfinished CGF, though with decreased elastic recovery, air permeability and softness. The finished CGF of this study is expected to improve the therapeutic effect of hypertrophic scars and improve the quality of life of patients with hypertrophic scars. Full article

Polybenzoxazines (PBzs), a class of high-performance thermosetting polymers, have gained significant attention for their exceptional thermal stability, mechanical properties, and chemical resistance, making them ideal for aerospace, electronics, and biomedical applications. Recent advancements emphasize their antimicrobial potential, attributed to unique structural properties and the ability to incorporate bio-active functional groups. This review highlights the synthesis, antimicrobial mechanisms, and applications of PBzs and their bio-based derivatives, focusing on sustainable materials science. PBzs demonstrate antimicrobial efficacy through mechanisms such as hydrophobic surface interactions and reactive functional group formation, preventing microbial adhesion and biofilm development. The incorporation of functional groups like amines, quaternary ammonium salts, and phenolic moieties disrupts microbial processes, enhancing antimicrobial action. Modifications with metal nanoparticles, organic agents, or natural bio-actives further augment these properties. Notable bio-based benzoxazines include derivatives synthesized from renewable resources like curcumin, vanillin, and eugenol, which exhibit substantial antimicrobial activity and environmental friendliness. Hybrid PBzs, combining natural polymers like chitosan or cellulose, have shown improved antimicrobial properties and mechanical performance. For instance, chitosan-PBz composites significantly inhibit microbial growth, while cellulose blends enhance film-forming capabilities and thermal stability. PBz nanocomposites, incorporating materials like silver nanoparticles, present advanced applications in biomedical and marine industries. Examples include zirconia-reinforced composites for dental restoration and urushiol-based PBzs for eco-friendly antifouling solutions. The ability to customize PBz properties through molecular design, combined with their inherent advantages such as flame retardancy, low water absorption, and excellent mechanical strength, positions them as versatile materials for diverse industrial and medical applications. This comprehensive review underscores the transformative potential of PBzs in addressing global challenges in antimicrobial material science, offering sustainable and multifunctional solutions for advanced applications. Full article

(1) Background: Since the discovery of antibiotics in the first half of the 20th century, humans have abused this privilege, giving rise to antibiotic-resistant pathogens. Recent research has brought to light the use of antimicrobial peptides in polymers, hydrogels, and nanoparticles (NPs) as a newer and safer alternative to traditional antibiotics. (2) Methods: This review article is a synthesis of the scientific works published in the last 15 years, focusing on the synthesis of polymers with proven antimicrobial properties. (3) Results: After a critical review of the literature was made, information and data about the synthesis and antimicrobial activity of antibacterial polymers and NPs functionalized with antibiotics were extracted. Fluorinated surfactants such as the Quaterfluo^® series presented significant antimicrobial effects and could be modulated to contain thioesters to boost this characteristic. Biopolymers like chitosan and starch were also doped with iodine and used as iodophors to deliver iodine atoms directly to pathogens, as well as being antimicrobial on their own. Quaternary phosphonium salts are known for their increased antimicrobial activity compared to ammonium-containing polymers and are more thermally stable. (4) Conclusions: In summary, polymers and polymeric NPs seem like future alternatives to traditional antibiotics. Future research is needed to determine functional doses for clinical use and their toxicity. Full article

The coagulation and flocculation properties of chitosan, an organic biopolymer derived from chitin, have been researched as an alternative to synthetic polymers and inorganic metal salt coagulants currently used in water and wastewater treatment. In an effort to encourage further research into the practical uses of chitosan as green chemistry in water and wastewater treatment and to promote the efficacious removal of microbial contaminants in drinking and wastewater, we have summarized the current state of research pertaining to the treatment of microorganisms in water and wastewater. A search of PubMed revealed 720 possible titles and abstracts, of which 44 full-text articles were identified as matching the eligibility criteria for inclusion in this systematic review. Results are presented based on the type of water matrix treated (i.e., drinking water, wastewater, and recreational waters) and a summary table providing details on the types and forms of chitosan utilized and the treatment mechanisms and processes described in the study. We find chitosan to be an effective coagulant, flocculant, and adsorbent for removing microbes from water and wastewater; some modified forms of chitosan can inactivate microbes and achieve disinfection, such as those containing metals like silver and antimicrobial chemicals like quaternary ammonium compounds or other strong oxidants, and use with filtration or electrochemical processes can achieve extensive reductions in microbes to meet performance targets of the World Health Organization. Full article

Chitosan was used as the raw material. A quaternization reaction was carried out between 2,3-epoxypropyltrimethylammonium chloride and water-soluble chitosan to prepare quaternary ammonium salt water-soluble chitosan (QWSC), and its corrosion inhibition performance against the corrosion of carbon steel in stone processing wastewater was evaluated. The corrosion inhibition efficiencies of QWSC on carbon steel in stone processing wastewater were investigated through weight loss, as well as electrochemical and surface morphology characterization techniques. The results show that QWSC has superior corrosion inhibition performance for A3 carbon steel. When an amount of 60 mL·L⁻¹ is added, the corrosion inhibition efficiency can reach 59.51%. Electrochemical research has shown that a QWSC inhibitor is a mixed-type corrosion inhibitor. The inhibition mechanisms of the QWSC inhibitor revealed that the positive charge on the surface of carbon steel in stone wastewater was conducive to the adsorption of Cl⁻ in the medium, which produced an excessive negative charge on the metal’s surface. At the same time, the quaternary ammonium cation and amino cation formed in QWSC in stone processing wastewater can be physically absorbed on the surface of A3 carbon steel, forming a thin-film inhibitor to prevent metal corrosion. Full article

Blueberry anthocyanin-derived cyanidin (BAC) was used to prepare a series of responsive food freshness packaging films by compounding it with quaternary chitosan (QC) and gelatin (G). The fundamental properties, pH sensitivity, and functional attributes of the films were examined. The BAC solutions exhibited notable variations in color (from red to pink to violet) under different pH conditions. The incorporation of BAC resulted in improved UV–vis shielding capabilities but compromised the mechanical strength of the films (with tensile strength values from 85.02 to 44.89 MPa, elongation at break from 13.08% to 3.6%, and water vapor transmission rates from 5.24 × 10⁻⁹ to 7.80 × 10⁻⁹ g m⁻¹ s⁻¹ Pa⁻¹). The QC-G-BAC films, containing 5–15 wt% BAC, exhibited noticeable color changes in acidic/ammonia environments within a short timeframe, easily discernible to the naked eye. Furthermore, the inclusion of BAC significantly enhanced the antioxidant and antimicrobial properties of the films. The addition of 5–15 wt% BAC to QC-G-BAC films could be employed for assessing the freshness of fresh shrimp (from red to dark red) and pasteurized milk (from red to dark earthy yellow). Among them, the total color difference (ΔE) of QC-G-BAC5 film was significantly correlated with the pH, acidity, and total colony count of pasteurized milk (R = 0.846, −0.930, −0.908, respectively). This new concept in smart packaging offers a straightforward and user-friendly freshness indicator. Full article

The antioxidant activity of chitosan (CS) and three water-soluble derivatives was analyzed comparatively by in vitro and in vivo experiments, including hydroxypropyl chitosan (HPCS), quaternary ammonium salt of chitosan (HACC), and carboxymethyl chitosan (CMCS). The results show that chitosan and its water-soluble derivatives have a scavenging ability on DPPH radicals, superoxide radicals, and hydroxyl radicals, and a reducing ability. A remarkable difference (p < 0.05) was found for HACC and HPCS compared with CS on DPPH radicals, hydroxyl radicals, and reducing ability. The antioxidant ability of the four chitosan samples was in the order of HPCS > HACC > CMCS > CS. Furthermore, antioxidant activity of all samples increased gradually in a concentration-dependent manner. The in vivo result indicates that oral CS and its derivatives samples result in a decrease in lipid peroxides (LPO) and free fatty acids (FFA) levels in serum with an increase in superoxide dismutase (SOD) activity. Especially for the HPCS and HACC groups, the LPO, FFA, and SOD activity in serum was different significantly in comparison with the high-fat controlgroup (HF) (p < 0.05). These results indicate that chitosan and its derivatives can be used as good antioxidants, and the antioxidant activity might be related to the molecular structure of chitosan derivatives. Full article

The azide transfer reaction and copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) can be used to convert the amino groups in chitosan to triazole 1,2,3-moieties. The resulting polymer has been named chitotriazolan. This synthesis was performed with six different quaternary ammonium alkynes and three amine alkynes to obtain a series of nine water-soluble chitotriazolan derivatives. The structure and complete conversion of the azide were confirmed by FT-IR and proton NMR spectroscopy. The derivatives were investigated for antibacterial activity against S. aureus, E. faecalis, E. coli, and P. aeruginosa. The activity of the quaternized chitotriazolan derivatives varied depending on the structure of the quaternary moiety and the species of bacteria. The basic protonable derivatives were less active or inactive against the bacteria. Full article

Wood is a naturally porous material prone to microbial erosion and degradation in outdoor environments. Therefore, the development of an environmentally friendly wood preservative with excellent antibacterial effects and low toxicity is urgently needed. In this study, nitrogen-doped carbon quantum dots (N-CQDs) with excellent antifungal performance and fluorescent properties were synthesized using a one-step hydrothermal method with chitosan quaternary ammonium salt (HACC) as the raw material. The fluorescence characteristics of N-CQD preservatives can help track their position and distribution in wood. The minimum inhibitory concentration (MIC) of N-CQDs is 1.8 mg/mL, which was nearly 22 times lower than that of HACC (40.0 mg/mL) in the PDA medium. The decay resistance test demonstrated that wood treated with N-CQDs showed a considerably reduced decay degree and its mass loss rate decreased from 46 ± 0.5% to 3.8 ± 0.5%. Biological transmission electron microscopy revealed that N-CQDs effectively destroyed fungal cell structures, thereby hindering the growth of Coriolus versicolor. N-CQDs synthesized using the one-step hydrothermal method can be used as an efficient wood preservative that can effectively improve the utilization and service life of wood. Full article

The present study focused on the design and preparation of acid-responsive benzimidazole-chitosan quaternary ammonium salt (BIMIXHAC) nanogels for a controlled, slow-release of Doxorubicin HCl (DOX.HCl). The BIMIXHAC was crosslinked with sodium tripolyphosphate (TPP) using the ion crosslinking method. The method resulted in nanogels with low polydispersity index, small particle size, and positive zeta potential values, indicating the good stability of the nanogels. Compared to hydroxypropyl trimethyl ammonium chloride chitosan-Doxorubicin HCl-sodium tripolyphosphate (HACC-D-TPP) nanogel, the benzimidazole-chitosan quaternary ammonium salt-Doxorubicin HCl-sodium tripolyphosphate (BIMIXHAC-D-TPP) nanogel show higher drug encapsulation efficiency and loading capacity (BIMIXHAC-D-TPP 93.17 ± 0.27% and 31.17 ± 0.09%), with acid-responsive release profiles and accelerated release in vitro. The hydroxypropyl trimethyl ammonium chloride chitosan-sodium tripolyphosphate (HACC-TPP), and benzimidazole-chitosan quaternary ammonium salt-sodium tripolyphosphate (BIMIXHAC-TPP) nanogels demonstrated favorable antioxidant capability. The assay of cell viability, measured by the MTT assay, revealed that nanogels led to a significant reduction in the cell viability of two cancer cells: the human lung adenocarcinoma epithelial cell line (A549) and the human breast cancer cell line (MCF-7). Furthermore, the BIMIXHAC-D-TPP nanogel was 2.96 times less toxic than DOX.HCl to the mouse fibroblast cell line (L929). It was indicated that the BIMIXHAC-based nanogel with enhanced antioxidant and antitumor activities and acidic-responsive release could serve as a potential nanocarrier. Full article

Herein, a chitosan film (CS) was modified using 2,3-epoxy-propyl trimethyl ammonium chloride (GTA) to flocculate granular pollutants in potato starch wastewater, aiming at the deficiencies of poor water solubility and weak electropositivity of the chitosan film. By examining the degree of substitution of chitosan film amino under different factors and different levels and response surface optimization tests, the optimum preparation conditions of chitosan film quaternary ammonium salt (HTCC) were obtained. Using scanning electron microscopy (SEM), Fourier infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and ¹H-nuclear magnetic spectroscopy, the nucleophilic substitution reaction of the GTA molecule with the hydrogen atoms in the chitosan film amino group successfully improved the water solubility and electropositivity of the chitosan film. HTCC was used to treat potato starch wastewater, and the optimal flocculation conditions were obtained. The flocculation product was recovered, and the composition analysis of the flocculation product demonstrated that HTCC-potato protein flocculation precipitate was rich in high protein, which is a good choice of feed and can realize sustainable utilization of resources. Full article

Oral ulcer is a common inflammatory disease of oral mucosa, causing severe burning pain and great inconvenience to daily life. In this study, compound 3J with anti-inflammatory activity was synthesized beforehand. Following that, an intelligent composite hydrogel supported 3J was designed with sodium alginate, carboxymethyl chitosan, and chitosan quaternary ammonium salt as the skeleton, and its therapeutic effect on the rat oral ulcer model was investigated. The results show that the composite hydrogel has a dense honeycomb structure, which is conducive to drug loading and wound ventilation, and has biodegradability. It has certain antibacterial effects and good anti-inflammatory activity. When loaded with 3J, it reduced levels of TNF-α and IL-6 in inflammatory cells by up to 50.0%. It has excellent swelling and water retention properties, with a swelling rate of up to 765.0% in a pH 8.5 environment. The existence of a large number of quaternary ammonium groups, carboxyl groups, and hydroxyl groups makes it show obvious differences in swelling in different pH environments, which proves that it has double pH sensitivity. It is beneficial to adapt to the highly dynamic changes of the oral environment. Compared with single hydrogel or drug treatment, the drug-loaded hydrogel has a better effect on the treatment of oral ulcers. Full article

Quaternary ammonium palmitoyl glycol chitosan (GCPQ) has already shown beneficial drug delivery properties and has been studied as a carrier for anticancer agents. Consequently, we synthesised cytotoxic platinum(IV) conjugates of cisplatin, carboplatin and oxaliplatin by coupling via amide bonds to five GCPQ polymers differing in their degree of palmitoylation and quaternisation. The conjugates were characterised by ¹H and ¹⁹⁵Pt NMR spectroscopy as well as inductively coupled plasma mass spectrometry (ICP-MS), the latter to determine the amount of platinum(IV) units per GCPQ polymer. Cytotoxicity was evaluated by the MTT assay in three human cancer cell lines (A549, non-small-cell lung carcinoma; CH1/PA-1, ovarian teratocarcinoma; SW480, colon adenocarcinoma). All conjugates displayed a high increase in their cytotoxic activity by factors of up to 286 times compared to their corresponding platinum(IV) complexes and mostly outperformed the respective platinum(II) counterparts by factors of up to 20 times, also taking into account the respective loading of platinum(IV) units per GCPQ polymer. Finally, a biodistribution experiment was performed with an oxaliplatin-based GCPQ conjugate in non-tumour-bearing BALB/c mice revealing an increased accumulation in lung tissue. These findings open promising opportunities for further tumouricidal activity studies especially focusing on lung tissue. Full article

The presence of antibiotic-resistant bacteria in our environment is a matter of growing concern. Consumption of contaminated drinking water or contaminated fruit or vegetables can provoke ailments and even diseases, mainly in the digestive system. In this work, we present the latest data on the ability to remove bacteria from potable water and wastewater. The article discusses the mechanisms of the antibacterial activity of polymers, consisting of the electrostatic interaction between bacterial cells and the surface of natural and synthetic polymers functionalized with metal cations (polydopamine modified with silver nanoparticles, starch modified with quaternary ammonium or halogenated benzene). The synergistic effect of polymers (N-alkylaminated chitosan, silver doped polyoxometalate, modified poly(aspartic acid)) with antibiotics has also been described, allowing for precise targeting of drugs to infected cells as a preventive measure against the excessive spread of antibiotics, leading to drug resistance among bacteria. Cationic polymers, polymers obtained from essential oils (EOs), or natural polymers modified with organic acids are promising materials in the removal of harmful bacteria. Antimicrobial polymers are successfully used as biocides due to their acceptable toxicity, low production costs, chemical stability, and high adsorption capacity thanks to multi-point attachment to microorganisms. New achievements in the field of polymer surface modification in order to impart antimicrobial properties were summarized. Full article

In this study, the antibacterial microcapsules of cinnamon essential oil (CEO) were prepared by complex condensation method. Chitosan quaternary ammonium salt (HACC) combined with gum arabic (GA) was selected as the coated wall material. The optimal preparation conditions of CEO microcapsules (CMSs) were determined by response surface methodology (RSM): the core/wall mass ratio was 1:1, the pH value was 4.5, the mass concentration of CaCl₂ was 0.7 wt% and the actual encapsulation rate of microcapsules was 90.72% ± 1.89%. The morphology, size, composition and thermal stability of the prepared CMSs were characterized by scanning electron microscopy (SEM), laser particle size analysis (LPDA), Fourier transform infrared spectroscopy (FTIR), thermogravimetric differential thermal analysis (TG–DTA) and differential scanning calorimetry (DSC). In addition, the in vitro drug release and antibacterial properties of CMS were also evaluated. The results showed that CMS was spherical, with an average particle size of 6.31 µm. The obvious weight loss occurred at 269 °C and the corresponding DSC curve had an obvious exothermic peak at 265.5 °C, which had an increase compared with CEO. Microcapsules can achieve slow release, with the lowest and highest release rates being 19.66% and 49.79%, within 30 days. The drug release curve of essential oil of microcapsules was consistent with a first-order release model named ExpDec1. Based on the above research results, the CMS can effectively improve the stability of essential oil, achieve slow release and prolong the antibacterial effect, indicating its potential applications in food, cosmetics and medicine. Full article