Search Results (105)

Wind turbine blades are exposed to multiple coupled stressors requiring protective coatings with ultra-low volatile organic compound (VOC) content, thick-film capability, and long-term durability. This review critically evaluates waterborne polyurethane (WPU) coatings as a sustainable solution, benchmarking five synthesis routes—prepolymer emulsification, acetone process, melt dispersion, ketimine/ketazine chemistry, and self-emulsification—with prepolymer emulsification identified as the most industrially mature method. Key modification strategies are systematically compared, including nano-reinforcement, surface energy control, self-healing chemistries, and bio-based approaches. Based on a synthesis of laboratory, wind-tunnel, and field studies, three critical bottlenecks—thick-film formation, nanofiller dispersion, and long-term weatherability—are identified. To address these, a layered coating architecture is proposed, integrating a low-surface-energy topcoat, a lamellar-barrier mid-coat, and a post-crosslinked primer. This framework aims to guide the industrial deployment of WPU thick-film blade coatings in offshore and other extreme environments. Full article

Background/Objectives: The classification of adhesive systems has historically relied on the type of etching agent and the sequence of application steps, distinguishing etch-and-rinse and self-etch categories. However, these models do not encompass the versatility introduced by universal adhesives or other emerging polymeric materials. This review aimed to integrate etching technique as a defining parameter within adhesive classification, linking material composition, bonding strategy, and clinical execution into a coherent functional framework. Methods: A structured narrative review of experimental, translational, and clinical studies published between 2010 and 2025 was conducted using PubMed and Scopus. Literature addressing adhesive categories, etching strategies, etching techniques, and smear layer characteristics was critically synthesized to identify functional relationships relevant to bonding performance and clinical decision-making. Results: The proposed taxonomy classifies materials as conventional, universal, touch-cure primers, self-adhesive/universal, and glass ionomer cements. Bonding strategies are organized as etch-and-rinse, self-etch, pre-etched, and unassisted, while etching techniques are defined as selective or nonselective families encompassing five clinically defined techniques. Incorporating etching technique clarifies the role of smear layer density, the acidity of adhesive materials, and functional monomer reactivity in demineralization and bonding. This structure enhances the understanding and teaching of adhesive concepts and supports evidence-based clinical selection of materials and techniques. Conclusions: Integrating etching technique into adhesive classification provides a functional and dynamic framework that unifies material, strategy, and technique. This taxonomy facilitates clinical decision-making and can evolve with future adhesive formulations. Further independent, long-term studies are warranted to validate the proposed combinations of materials and etching procedures. Full article

Environmental DNA (eDNA) metabarcoding has become a powerful, non-invasive method for detecting aquatic organisms. However, optimal sampling strategies for benthic taxa in lentic ecosystems remain unclear. This study evaluated the effectiveness of eDNA metabarcoding in detecting freshwater Unionidae mussels in lake water columns and examined their spatial and seasonal distribution patterns. We validated a mini-barcode primer targeting the mitochondrial 16S rDNA of unionid mussels through controlled laboratory experiments and field tests, confirming reliable amplification and accurate taxonomic assignment of freshwater bivalve DNA. Field surveys were conducted in four lakes within the Nakdong River basin, where eDNA samples were collected from littoral zones and from surface, mid-, and bottom layers of central lake areas during autumn and winter. Metabarcoding analysis identified 79 amplicon sequence variants (ASVs) representing four unionid taxa, with Cristaria plicata and Sinanodonta lauta comprising the majority of reads and ASVs. Overall, the number of Unionidae eDNA reads showed no significant seasonal differences, but there was notable spatial variation among sampling locations. Read numbers were significantly lower in littoral zones compared to central lake areas, with no significant differences detected among depth layers within the central zones. Species-specific analyses revealed contrasting spatial patterns: C. plicata had higher read abundance in mid- and bottom layers, while S. lauta was more frequently detected in surface and littoral samples. These findings suggest that the distribution of freshwater mussel eDNA in lakes is primarily influenced by spatial factors related to habitat preference and hydrodynamic mixing, rather than by seasonal variation during stable periods. This study offers practical insights for designing effective eDNA sampling strategies for benthic invertebrates in lentic ecosystems. Full article

To tackle the long-standing issue of inadequate corrosion protection in waterborne coatings, this study innovatively incorporates hollow glass microspheres (HGB) into waterborne epoxy zinc-rich primers through physical blending, constructing a dual-layer synergistic anticorrosion system comprising an HGB-modified primer and a zirconium phosphate/urushiol titanium polymer (UTPCZrP)-modified waterborne epoxy topcoat. Optimal performance is achieved with 2 wt% HGB addition: the dual-layer coating retains favorable physicochemical and mechanical properties while enhancing anticorrosion performance by 1–2 orders of magnitude, boasting an impedance of 3.2 × 10⁶ Ω, a corrosion rate as low as 5.71 × 10^–6 mm/year, 99.98% protection efficiency (stable after 25-day immersion), and 720 h salt spray resistance without corrosion diffusion. This method exhibits universality in waterborne polyurethane (WPU) and polyester (WPE) systems, yielding impedance values of 3.57 × 10⁶ Ω and 2.7 × 10⁶ Ω, respectively, with over 90% improved anticorrosion performance and long-term stability. By optimizing components and synergistic system design, this work significantly enhances waterborne coatings’ anticorrosion efficiency, reduces raw material costs, and provides a scalable technical pathway for high-performance, eco-friendly anticorrosion coatings. Full article

Concrete is widely employed in structural engineering; however, its porous nature renders it vulnerable to chloride ingress and salt freezing cycles, ultimately compromising its durability. To address this, a penetrating primer based on tetraethyl orthosilicate (TEOS) was prepared in an ethanol-water co-solvent system, and a hydrophobic topcoat of isooctyltriethoxysilane (IOTES) was obtained via emulsification. A layered application on concrete surfaces yielded a TEOS–IOTES dual-coating protection system designed to enhance water repellency and thereby improve resistance to chloride penetration and salt freeze–thaw damage. Test results show that the dual coating markedly increased hydrophobicity, giving a water contact angle of 130° and reducing water absorption rate to below 0.01 mm/min^0.5. Compared with single-layer treatments, the dual coating significantly lowered the free chloride diffusion coefficient (reached 83.74%). In terms of salt freezing cycle resistance, the dual-coating protection delayed surface scaling and increased the critical number of freeze–thaw cycles required for damage by 40%. Microstructural analyses indicate that the TEOS primer generates nano-SiO₂ and C-S-H gels, refining pores and densifying the matrix, while the IOTES topcoat forms a durable hydrophobic layer that suppresses moisture and deleterious ion transport. The synergistic “densification–hydrophobization” mechanism substantially enhances concrete durability, offering a cost-effective and efficient surface-protection strategy with promising application potential. Full article

The rise in electric vehicles (EVs) with lithium-ion batteries supports net-zero goals, but the increasing demand will inevitably generate more battery waste. Current pack designs often rely on permanent joining techniques, which hinder disassembly and thereby limit serviceability, reuse and recycling. A critical challenge is the removal of the battery lid, typically bonded to the pack frame with sealant adhesives. In the absence of design for disassembly requirements for OEMs, this study investigates a novel debonding strategy focused on the lid-to-frame bonding. A silane-based adhesive commonly used in battery packs is first characterised under tensile, shear and mode I conditions to establish the baseline performance in the range of flexible adhesive properties. Herein, a heat-activated primer is introduced as a debondable interfacial layer between the adhesive and the substrate. Upon activation at 150 °C, the primer significantly reduces adhesion, around 98% of the initial joint strength, enabling room temperature debonding. The primer demonstrates strong compatibility with epoxy and polyurethane adhesives, but its performance with silane-based systems still needs to be improved in terms of the primer’s compatibility with silane-based adhesives. Finally, a small-scale testing apparatus is developed to evaluate primer effectiveness in the disassembly of battery lids. This approach represents a promising step toward more serviceable, recyclable and sustainable battery systems. Full article

This article presents a comprehensive analysis of the polychrome paintings on the Flower Peking Opera Theatre in Bozhou, Anhui Province, China. A multi-technique approach was employed, including polarized light microscopy (PLM), X-ray fluorescence (XRF), micro-Raman spectroscopy, X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy with energy-dispersive spectrometry (SEM-EDS), and Herzberg staining to determine the composition and methodologies involved in the formation of the pigment layer, the white primer, and the ground layer. The analysis identified cinnabar (red), both artificial ultramarine and Prussian blue (blue), a mixture of barite and gypsum (white), a mixture of chromite and Prussian blue (green), and carbon black (black) in the pigment layer. The ground layer was found to consist of clay and plant fibers (cotton and hemp), while the white prime layer was primarily composed of barite and gypsum. This research provides insights for future conservation and restoration efforts. Full article

The deterioration of concrete hydraulic structures caused by chemical factors, seepage, and environmental stress necessitates advanced protective coatings that enhance durability, flexibility, and environmental sustainability. Conventional protective systems often exhibit limited durability under combined hydraulic, thermal, and chemical stress. In this study, a novel polyfluorosilicone-based coating system is presented, which integrates a deep-penetrating nano-primer for substrate reinforcement, a crack-bridging polymer intermediate layer for impermeability, and a polyfluorosilicone topcoat providing UV and weather resistance. The multilayer architecture addresses the inherent trade-offs between adhesion, flexibility, and durability observed in conventional waterproofing systems. Informed by a mechanistic study of interfacial adhesion and failure modes, the coating exhibits outstanding high mechanical and performance characteristics, including a mean pull-off bond strength of 4.56 ± 0.14 MPa for the fully cured triple-layer coating system, with cohesive failure occurring within the concrete substrate, signifying a bond stronger than the material it protects. The system withstood 2.2 MPa water pressure and 200 freeze–thaw cycles with 87.2% modulus retention, demonstrating stable mechanical and environmental durability. The coating demonstrated excellent resilience, showing no evidence of degradation after 1000 h of UV aging, 200 freeze–thaw cycles, and exposure to alkaline solutions. This water-based formulation meets green-material standards, with low volatile organic compound (VOC) levels and minimal harmful chemicals. The results validate that a multi-scale, layered design strategy effectively decouples and addresses the distinct failure mechanisms in hydraulic environments, providing a robust and sustainable solution. Full article

To evaluate the slip resistance of high-strength bolted friction-type connections subjected to different corrosion-protection treatments, calibration tests were performed on six representative faying-surface conditions: sand-blasted (uncoated), epoxy zinc-rich primer, waterborne inorganic zinc-rich coating, alcohol-soluble inorganic anti-corrosion anti-slip primer, a complete multi-layer protective coating system, and cold galvanizing. Fifteen test groups comprising 45 tensile specimens were examined to determine slip factors, which were then compared with values recommended in domestic and international design standards. The results show that sand-blasted surfaces (W type) exhibit stable slip factors of μ = 0.43–0.45; alcohol-soluble inorganic primer surfaces (S type) provide the highest slip resistance with μ = 0.49–0.51, representing an increase of approximately 13%–18% compared with sand-blasted surfaces; and cold-galvanized surfaces (D type) achieve favourable performance with μ ≈ 0.44. Waterborne inorganic zinc-rich surfaces (A type) yield μ ≈ 0.33, corresponding to a reduction of about 25%, and are suitable for non-slip-critical connections. In contrast, epoxy zinc-rich primers (C type) and complete multi-layer coating systems (X type) present lower slip factors of μ = 0.26–0.28 and μ ≈ 0.23, corresponding to reductions of approximately 35%–45% and about 50%, respectively, indicating that the X-type treatment is unsuitable for slip-critical applications. The influence of bolt diameter is limited, with slip-factor variations within 5%–8% under the same surface condition, and no statistically significant effect confirmed by two-way ANOVA. These findings provide a quantitative experimental basis for the design, classification, and future standardization of friction-type bolted connections with coated faying surfaces. Full article

Pre-coated metal sheets (PCM), as a popular product in modern coating industries, offer significant advantages such as simple processing, lightweight properties, and excellent manufacturability. The pretreatment layer within its coating system has a significant impact on overall corrosion resistance. In this study, through a comparative analysis of two chromate-free pretreatment systems, we conducted a thorough investigation into the combination of the pretreatment layer and examined the impact on the corrosion performance of pre-coated metal sheets. It was found that the phytic acid-based pretreatment layer enhances the adhesion between the primer and the substrate by forming strong chemical bonds with the primer layer, which effectively inhibits the lateral diffusion of corrosive media to the metal surface. Consequently, pre-coated metal sheets with the phytic acid-based pretreatment exhibit superior anti-foaming performance compared to the system using the silane-based pretreatment layer. This provides a new insight into the design and development of Cr-free pretreatment systems with better corrosion resistance performance. Full article

Flattened bamboo (FB) exhibits pronounced structural and chemical heterogeneity between outer and inner layers and between nodes and internodes. These variations critically influence its interfacial performance with waterborne acrylic coatings. This study aimed to clarify how primer layer configuration and substrate heterogeneity jointly affect the coating adhesion, hardness, and abrasion resistance of FB. Three coating schemes—one primer and one topcoat (1P1T), two primers and one topcoat (2P1T), and three primers and one topcoat (3P1T)—were applied to four types of FB substrates defined by layer and structural position. Adhesion, pencil hardness, and abrasion resistance were measured according to GB/T standards, complemented by surface roughness, contact angle, XPS, and SEM analyses. Results showed that substrate heterogeneity dominated coating behavior. The parenchyma-rich inner-layer internodes, characterized by higher polarity (O/C = 0.296) and rougher texture, exhibited stronger adhesion and superior abrasion stability, whereas the fiber-dense outer layer nodes, with lower polarity (O/C = 0.262), showed weaker bonding. Increasing the number of primer layers improved film continuity only when the substrate microstructure allowed sufficient primer penetration. The combined findings indicate that coating adhesion and wear stability are primarily governed by substrate composition and surface polarity rather than by coating thickness. These results provide scientific and practical guidance for optimizing primer application and surface preparation in the industrial finishing of bamboo-based decorative panels, while also highlighting the environmental and economic advantages of waterborne coating optimization for sustainable bamboo manufacturing. Full article

To meet the growing demand for intelligent surfaces in furniture and interior design, this study developed thermochromic UV coatings for bleached poplar. While conventional UV coatings are valued for their ecofriendliness and rapid curing, their functionality remains limited; integrating thermochromic capability offers a highly promising solution. We examined how the combination of two microcapsule systems (UF@TS and UF@TS-R) influenced the performance of UV coatings on bleached poplar by applying a two-primer/two-topcoat protocol with varied microcapsule loadings to impart color-changing behavior. The effects were then analyzed from multiple perspectives—type, application layer, and concentration gradient—covering optical and mechanical properties as well as thermochromic response. Results indicated that the optimum performance was achieved when UF@TS was incorporated into the UV topcoat and UF@TS-R into the UV primer at specific mass concentrations. The resulting coating delivered temperature-responsive color variation, providing both theoretical and technical support for developing high-value-added UV finishes for wooden furniture and advancing the use of fast-growing timber in high-end applications. Full article

In this study, poplar boards were bleached and treated with two types of urea–formaldehyde-coated ternary system thermochromic microcapsules (UF@TS), which were mixed with UV primer. The bleached poplar boards were manually painted with two layers of primer and topcoat. Coating samples with varying microcapsule contents were prepared and evaluated based on factors such as glossiness, reflectivity, and other surface properties. The experimental results showed that bleaching treatment significantly increased the whiteness of poplar wood, with an improvement rate of up to 17%. Among the two microcapsule types, the coating containing #2 microcapsules exhibited superior surface quality compared to #1 microcapsules. As the microcapsule content increased, the coating glossiness showed an overall decreasing trend and a certain degree of fluctuation, and the #2 microcapsule showed lower reflectivity values. The addition of UF@TS microcapsules negatively affected the coating adhesion but had little effect on hardness. The #2 microcapsule enhanced the impact resistance of the coating to a certain extent and increased surface roughness. Regarding thermochromic performance, the #1 microcapsule exhibited higher color-changing temperature and larger color difference, while the #2 microcapsule showed color-changing temperature closer to room temperature. Despite a decline in thermochromic performance and glossiness during aging, the 1# microcapsule showed slightly better stability. The coating containing 10% #2 microcapsules demonstrated the best comprehensive performance on bleached poplar wood, with glossiness of 2.1 GU, reflectivity of 67.95%, adhesion grade of 1, hardness of 6 H, impact resistance grade of 4, and surface roughness of 0.681 μm. The ΔE in the range of −20 °C to 50 °C was 7.434. After aging, ΔE was 5.846, and the light loss rate was 9%, with excellent comprehensive performance. Full article

The formation of metal–polymer composites by 3D printing PLA and PETG onto EN AW-5182 H111 aluminum substrates without the use of adhesives was investigated. Four surface treatments were evaluated on the metal substrate (fine sanding, coarse sanding, abrasive blasting, and acid etching), over which a polymer primer—prepared from PLA and PETG solutions—was applied. Subsequently, test specimens were fabricated using the same polymer through material extrusion (MEX) with filaments. Adhesion strength between the printed polymer and the metal substrate was assessed through perpendicular tensile, lap shear, and three-point bending tests. The 16-condition experimental matrix combined surface treatment, primer thickness, and bed temperature and was replicated for each test. Peak tensile and shear strengths confirmed the effectiveness of the proposed strategy, with PETG consistently showing a higher interfacial performance than PLA. ANOVA analysis identifies primer layer thickness (p = 0.023) and loading type (p = 0.031) as statistically significant variables. The results suggest that either abrasive or acid pretreatment, combined with a primer thickness ≥ 80 µm and moderate bed temperatures (65 °C for PLA and 90 °C for PETG), enables the fabrication of robust metal–polymer joints, which are particularly resistant to shear stress and suitable for industrial applications. Full article

This study was undertaken to identify foodborne bacteria and fungi from different parts of eggs depending on their storage duration, organoleptic properties, total viable count, and antibiotic resistance profile. Thirty-two samples were randomly collected from commercial layer farms in Mymensingh. Following the protocol of sample preparation, outer-surface and inner-content samples were streaked onto various selective media. Isolation and identification were carried out by observing Gram staining and biochemical properties. Molecular detection was confirmed through a PCR assay using specific primers for Salmonella spp., E. coli, Staphylococcus spp., and fungus (Simplicillium spp. and Saccharomyces spp.). To determine the antibiotic resistance profile, the disk diffusion method was followed against nine antibiotic disks. The isolation rate of E. coli, Salmonella spp., and Staphylococcus spp. was 53.13%, 40.63%, and 40.63%, respectively, in the outer eggshell and 15.63%, 25%, and 15.63%, respectively, in the inner content of the eggs. Regarding the fungus content (yeast and mold), 100% was obtained in the outer eggshell, whereas there was an absence of fungus in the inner content. It was observed that all the isolates of E. coli, Salmonella spp., and Staphylococcus spp. were highly sensitive to either Ciprofloxacin or Levofloxacin and extremely resistant to Amoxicillin or Azithromycin drug disks or both. The data also shows that storage duration had a proportional relationship with TVC and an inversely proportional relationship with organoleptic properties. This study indicates that eggs harbor multidrug-resistant foodborne bacteria, which might constitute a public health hazard if these antibiotic-resistant bacteria are transferred to humans. Full article