Search Results (1,324)

Background/Objectives: Immune checkpoint inhibitors targeting the PD-1/PD-L1 axis have become a standard in the treatment of all stages of non-small lung cancer. Beyond tumor-intrinsic biomarkers like PD-L1 expression, evidence points to the role of patient-related factors, such as body mass index, sarcopenia, and cachexia. These body composition parameters may reflect metabolic reserve or even immune competence and could help stratify outcomes in patients treated with PD-1 and PD-L1. This systematic review aims to evaluate the impact of body composition—specifically BMI, pretreatment weight loss, sarcopenia, and cachexia—on clinical outcomes such as progression-free and overall survival in NSCLC patients treated with immune checkpoint inhibitors. Methods: A systematic literature search was conducted across multiple databases including PubMed, Google Scholar, and Science Direct. We included full-text original research articles (1 January 2020–1 May 2025) reporting clinical outcomes of NSCLC patients treated with PD-1 or PD-L1 inhibitors, in relation to body composition factors (BMI, pretreatment weight loss, sarcopenia, cachexia). Eligible studies involved adults (>18 years) and included observational cohorts or controlled trials; animal or in vitro studies were excluded. Data extraction and risk of bias assessments were performed independently by two reviewers, with discrepancies being resolved through a third one. Results: From 12,358 records identified, 21 studies met the inclusion criteria. Most were retrospective cohorts assessing the impact of pre-treatment weight loss, cachexia, and sarcopenia on ICI outcomes in NSCLC. These factors consistently predicted poorer survival and response, while BMI alone showed limited prognostic value. Considerable heterogeneity in body composition definitions and outcome reporting was observed. Conclusions: Body composition—particularly weight loss, cachexia, and sarcopenia—significantly impacts survival and response in NSCLC patients treated with ICIs. These factors reflect immune–metabolic dysfunction that may impair treatment efficacy. BMI alone is insufficient; routine assessment of muscle mass and cachexia could improve risk stratification. Full article

Background/Objectives: Electrochemotherapy (ECT) has been shown to be effective in treating colorectal liver metastases when combined with bleomycin (BLM). Based on this promising finding, we compared in this study the efficacy of BLM with oxaliplatin (OXP) and bevacizumab (BVZ) in ECT. Methods: WAG/Rij rats were randomized into three groups and underwent ECT with intravenous injection of BLM, OXP, or OXP with BVZ for eight days following hepatic tumor cell implantation. Ultrasound and photoacoustic imaging served to assess oxygen saturation (SO₂) and hemoglobin concentration (HbT) of the developing tumors. Tissue samples were analyzed by histology and immunohistochemistry. Results: BLM treatment significantly reduced SO₂ (33.7%) and HbT (12.7%) levels compared to pretreatment values. In contrast, the OXP-treated groups exhibited only modest reductions in both parameters. BLM also induced a markedly higher necrosis rate (82.6%) compared to OXP and OXP/BVZ (11.0% and 26.3%). Conversely, OXP-treated tumors exhibited higher apoptosis rates. Furthermore, BLM treatment led to a decrease in tumor cell proliferation and a reduction in inflammatory response compared to the other treatments. Notably, BLM caused a 26.2% reduction in CD31-positive microvessels, which was significantly higher than that observed in the OXP group. Conclusions: BLM showed a more effective anti-tumor activity than OXP, suggesting its preferred use as chemotherapeutic agent in ECT. Full article

This study examines the impact of catchment characteristics and design on the performance of urban lakes in terms of water quality and stormwater harvesting potential. Two urban lake systems in Western Sydney, Australia, were selected for comparison: Wattle Grove Lake, a standalone constructed lake, and Woodcroft Lake, part of an integrated wetland–lake system. Both systems receive runoff from surrounding residential catchments of differing sizes and land uses. Over a one-year period, continuous monitoring was conducted to evaluate water quality parameters, including turbidity, total suspended solids (TSS), nutrients (total nitrogen and total phosphorus), pH, dissolved oxygen, and biochemical oxygen demand. The results reveal that the lake with an integrated wetland significantly outperformed the standalone lake in terms of water quality, particularly in terms of turbidity and total suspended solids (TSS), achieving up to 70% reduction in TSS at the outlet compared to the inlet. The wetland served as an effective pre-treatment system, reducing pollutant loads before water entered the lake. Despite this, nutrient concentrations in both systems remained above the thresholds set by the Australian and New Zealand Environment and Conservation Council (ANZECC) Guidelines (2000), indicating persistent challenges in nutrient retention. Notably, the larger catchment area and shallow depth of Wattle Grove Lake likely contributed to higher turbidity and nutrient levels, resulting from sediment resuspension and algal growth. Hydrological modelling using the Model for Urban Stormwater Improvement Conceptualisation (MUSIC) software (version 6) complemented the field data and highlighted the influence of catchment size, hydraulic retention time, and lake depth on pollutant removal efficiency. While both systems serve important environmental and recreational functions, the integrated wetland–lake system at Woodcroft demonstrated greater potential for safe stormwater harvesting and reuse within urban settings. The findings from the study offer practical insights for urban stormwater management and inform future designs that enhance resilience and water reuse potential in growing cities. Full article

Frying native potato chips produces snacks that are widely accepted, although they are associated with high fat content and the formation of potentially undesirable compounds. This study evaluated the effect of pretreatment with ultrasound at 28 and 40 kHz on the physicochemical, structural, and sensory properties of chips made from the Sempal and Agustina varieties. The chips were immersed in water and treated with ultrasound for 10 min before frying at 175 °C. Parameters such as moisture, fat content, water activity, color, reducing sugars, FTIR spectroscopy, SEM microscopy, and sensory acceptance by consumers were analyzed. Treatment with 40 kHz significantly reduced fat content (up to 22.07%), improved crispness, and promoted a more porous microstructure. A lower concentration of reducing sugars, greater brightness, and less darkening were also observed. Sensory evaluation showed that chips treated with 40 kHz were the most preferred and best rated in terms of texture and flavor. Finally, it was demonstrated that pretreatment with ultrasound at 40 kHz improved the technological and sensory quality of native potato chips, which would promote the value of these resources in healthy products. Full article

Ciprofloxacin (CIP), a persistent fluoroquinolone antibiotic, poses serious environmental concerns due to its low biodegradability and widespread presence in aquatic ecosystems. This study investigates the synergistic application of low-frequency ultrasonic cavitation and biological treatment to enhance CIP removal efficiency. Experiments have shown that under the optimal biological treatment conditions (6 g/L sludge concentration, pH 8), single biological treatment for 48 h can only remove 41.9% CIP and 24.9% total organic carbon (TOC). Ultrasonic pretreatment was conducted under varying frequencies and pH conditions to determine optimal cavitation parameters, while biodegradation performance was evaluated at different sludge concentrations and pH levels. Results indicated that in 10 mg/L CIP wastewater under alkaline conditions (pH 9.0), CIP and TOC removal efficiencies reached 58.9% and 35.2%, respectively, within 30 min using 15 kHz ultrasound irradiation. When ultrasonic pretreatment was followed by biological treatment, overall removal rates increased to 96.3% for CIP and 90.4% for TOC, significantly outperforming either method alone. LC-MS analysis identified several degradation intermediates during ultrasonic pretreatment, revealing key transformation pathways such as piperazine ring cleavage, hydroxylation, and defluorination. Furthermore, toxicity evaluation using the T.E.S.T. model confirmed a substantial reduction in ecological risk after ultrasonic treatment. Overall, the combined ultrasonic–biological process offers a cost-effective and environmentally sustainable strategy for the efficient removal of fluoroquinolone antibiotics from wastewater. Full article

Co-combustion is regarded as an effective means for high-efficiency utilization of low-quality fuels. However, low-quality fuel has problems such as low energy density and high water content. The fuel quality and blending performance can be further optimized by the pretreatment of low-quality fuel, for example, calorific value, hydrophobicity, and NO conversion rate. Based on the idea of co-upgradation, this study systematically investigates the effects of integrated upgrading on fuel quality and hydrophobicity under different conditions. In this study, lignite and wheat straw were selected as research objects. The co-upgrading experiments of wheat straw and lignite were conducted at reaction temperatures of 170 °C, 220 °C, and 270 °C in flue gas and air atmospheres with biomass blending ratios of 0%, 25%, 50%, 75%, and 100%. SEM (scanning electron microscopy) and nitrogen (N₂) adsorption analyses showed that under low-temperature and low-oxygen conditions, organic components from biomass pyrolysis migrated in situ to cover the surface of lignite, resulting in a gradual smoothing of the fuel surface and a decrease in the specific surface area. Meanwhile, water reabsorption experiments and contact angle measurements showed that the equilibrium water holding capacity and water absorption capacity of the lifted fuels was weakened, and hydrophobicity was enhanced. Combustion kinetic parameters and pollutant release characteristics were investigated by thermogravimetric analysis (TGA) and isothermal combustion tests. It was found that co-upgradation could effectively reduce the reaction activation energy and NO conversion rate. Characterized by Raman spectroscopy (Raman) and X-ray photoelectron spectroscopy (XPS), in situ migration of organic components affected combustion reactivity by modulating changes in N-containing product precursors. The results showed that the extracted fuel with a 75% biomass blending ratio in the flue gas atmosphere exhibited the best overall performance at 220 °C, with optimal calorific value, combustion reactivity, and hydrophobicity. These findings may provide important theoretical foundations and practical guidance for the optimization of industrial-scale upgrading processes of low-quality fuels. Full article

In this study, the effects of non-thermal pretreatment such as corona discharge plasma (CDP-21 kV), dielectric barrier discharge plasma (DBDP-32 kV), and ultrasonic waves of different powers (US-180 W, 210 W, 240 W) on hot-air drying of ferruginous yam were compared. The regulatory effects of ultrasonic and cold plasma pretreatment on the drying characteristics and quality of yam were systematically evaluated by determining the drying kinetic parameters, physicochemical indexes, volatile components, and energy consumption. The results showed that ultrasonic pretreatment significantly improved the drying performance of yam compared with different cold plasma treatments, with the highest drying rate and effective moisture diffusion coefficient in the US-180 W group. In terms of quality, this treatment group exhibited better color retention, higher total phenol content (366 mg/100 g) and antioxidant activity, and optimal rehydration performance. Low-field nuclear magnetic resonance (NMR) analyses showed a more homogeneous water distribution, and gas chromatography–mass spectrometry (GC-MS) identified 55 volatile components. This study confirms that the US-180 W ultrasonic pretreatment technology can effectively improve the drying efficiency and product quality of yam and at the same time reduce the energy consumption. The results of this study provide a practical solution for the optimization of a process that can be replicated in the food drying industry. Full article

In this work, we designed a novel and simple electrochemical approach for the determination of daidzein antioxidant (Dz) in peanut oil samples. The Dz determination was based on anodic stripping linear voltammetry using screen-printed graphene electrodes (SPGEs) activated in acidic media, where a strong adsorption of Dz on activated graphene was obtained. In this regard, electroanalytical parameters such as the scan rate, supporting electrolyte, pH, and accumulation step were optimized to ensure the best conditions for the selective and sensitive Dz quantification. The electrochemical method developed for the determination of Dz exhibits a linear behavior of the anodic peak current in the concentration range from 0.05 to 1 μM, with a limit of detection of 0.012 μM. The electrochemical sensor demonstrated to the capacity to quantify Dz in peanut oil samples at low concentrations without the necessity of an extensive sample pretreatment. Therefore, the electrochemical method proposed can be used as a new portable analytical tool for the in situ quality control of peanut oil samples. Full article

Silicon carbide (SiC) is widely utilized in semiconductors, microelectronics, optoelectronics, and other advanced technologies. However, its inherent characteristics, such as its hardness, brittleness, and high chemical stability, limit the processing efficiency and application of SiC wafers. This study explores the use of plasma etching as a pre-treatment step before chemical mechanical polishing (CMP) to enhance the material removal rate and improve CMP efficiency. Experiments were designed based on the Taguchi method to investigate the etching rate of plasma under various processing parameters, including applied power, nozzle-to-substrate distance, and etching time. The experimental results indicate that the etching rate is directly proportional to the applied power and increases with nozzle-to-substrate distance within 3–5 mm, while it is independent of etching time. A maximum etching rate of 5.99 μm/min is achieved under optimal conditions. And the etching mechanism and microstructural changes in SiC during plasma etching were analyzed using X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), white light interferometry, and ultra-depth-of-field microscopy. XPS confirmed the formation of a softened SiO₂ layer, which reduces hardness and enhances CMP efficiency; SEM revealed that etching pits form in relation to distance; and white light interferometry demonstrated that etching causes a smooth surface to become rough. Additionally, surface defects resulting from the etching process were analyzed to reveal the underlying reaction mechanism. Full article

Background and Objectives: Total neoadjuvant therapy (TNT) for locally advanced rectal cancer (LARC) offers significant advantages in terms of pathologic response and long-term survival; however, it is still unclear which patients will benefit the most from this treatment. This study aims to investigate the role of metabolic parameters on pretreatment positron emission tomography–computed tomography (PET/CT) images in predicting treatment response after TNT. Materials and Methods: The research was conducted using a single-center, retrospective design. Patients treated with total neoadjuvant therapy are included if they have locally advanced rectal cancer (cT3/T4-N0 or cTany-N1/N2). The patient group was categorized into two groups: CR and non-CR. Clinicopathologic features, PET/CT parameters, CA19-9, and CEA values were compared between these two groups. Results: In total, 52 patients were included. The CR group had 21 patients, and the non-CR group had 31 patients. The analysis demonstrated that the CR group had significantly lower metabolic tumor volume (MTV) and total lesion glycolysis (TLG) than the non-CR group (p = 0.022 vs. p = 0.003, p < 0.05). Also, CA19-9 values were lower than the non-CR group, and this difference was statistically remarkable (p = 0.40, p < 0.05). Conclusions: MTV and TLG parameters in PET/CT for pretreatment staging and pretreatment blood CA 19-9 levels are prognostic factors for predicting treatment response, and they may play a crucial role in choosing treatment. Comprehensive research is warranted on this subject with a larger patient population. Full article

Background/Objectives: Our work was designed to study the physicochemical properties, safety profile, pharmacokinetics, and prophylactic efficacy of an original iodine–dextrin-based pharmaceutical formulation (PA), both alone and in combination with azithromycin (AZ), in a murine model of LPS-induced sepsis. Methods/Results: UV–vis and ¹H-NMR spectroscopy confirmed the formation of a stable iodine–dextrin complex, with triiodide anions stabilized by hydrogen bonding and donor–acceptor interactions. No clinical signs of acute toxicity were observed at doses up to 5000 mg/kg, and subacute administration (62.5 and 125 mg/kg) showed no adverse effects on hematological or biochemical parameters. A mild, non-pathological enlargement of thyrocytes and parallel increases in TSH, T3, and T4 levels were observed at 125 mg/kg, consistent with physiological adaptation to iodine. Pharmacokinetic analysis revealed high oral bioavailability (~92%), prolonged half-life (~21 h), and wide tissue distribution with low clearance. In the sepsis model, pretreatment with AZ+PA alleviated clinical symptoms, maintained body weight, and significantly improved hematological parameters, reducing WBCs and CRP levels. The combination also decreased plasma IL-6 and TNF-α concentrations more effectively than either agent alone, indicating a synergistic anti-inflammatory effect. Histological analysis confirmed that PA, particularly in combination with AZ, mitigated LPS-induced tissue injury in the liver, kidney, and lungs. Conclusions: These findings suggest that PA is a safe, bioavailable compound with immunomodulatory properties that enhance azithromycin’s protective effects during systemic inflammation. This supports its potential use as a prophylactic agent in clinical settings, such as preoperative immune modulation to prevent sepsis-related complications. Full article

This study examines the impact of hydrothermal pretreatment operation time (10, 20, and 30 min) on the following four lignocellulosic feedstocks with different lignin content: sugar beet pulp (SBP), brewers spent grain (BSG), orange peel (OP), and rice husk (RH). The objective of pretreatment is twofold, as follows: (1) to enhance the organic matter solubilization and the release of value-added bioproducts, such as total reducing sugars (TRS), total proteins (PR), and volatile fatty acids (VFAs); and (2) to improve VFA and hydrogen production during a subsequent stage of acidogenic anaerobic digestion (Dark Fermentation, DF). In this context, OP reported the highest overall yields across all pretreatment durations. Specifically, at 30 min, it achieved a maximum solubilization of 57.3 gO₂/L in terms of soluble chemical oxygen demand (sCOD), 19.1 gTRS/L and 20.6 gPR/L. Regarding VFA and hydrogen production via dark fermentation, the best results were obtained with SBP pretreated for 20 and 30 min, yielding 15.1 g H-Ac/L and 97.5 mL H₂ (n.c.)/g (d.m.), respectively. BSG displayed an intermediate performance, whereas RH consistently showed the lowest yields across all evaluated parameters, primarily due to its high lignin content. These findings highlight the pivotal role of pretreatment duration in the valorization of lignocellulosic biomasses, primarily aimed at the recovery of high-value-added biochemicals and biofuels, such as hydrogen, thereby supporting the development of integrated biorefinery systems. Full article

Given the urgent need to decarbonize the global energy system, green hydrogen has emerged as a key alternative in the transition to renewables. However, its production via electrolysis demands high water quality and raises environmental concerns, particularly regarding reject water discharge. This study employs an experimental and analytical approach to define optimal water characteristics for electrolysis, focusing on conductivity as a key parameter. A pilot water treatment plant with reverse osmosis and electrodeionization (EDI) was designed to simulate industrial-scale pretreatment. Twenty water samples from diverse natural sources (surface and groundwater) were tested, selected for geographical and geological variability. A predictive algorithm was developed and validated to estimate useful versus reject water based on input quality. Three conductivity-based categories were defined: optimal (0–410 µS/cm), moderate (411–900 µS/cm), and restricted (>900 µS/cm). Results show that water quality significantly affects process efficiency, energy use, waste generation, and operating costs. This work offers a technical and regulatory framework for assessing potential sites for green hydrogen plants, recommending avoidance of high-conductivity sources. It also underscores the current regulatory gap regarding reject water treatment, stressing the need for clear environmental guidelines to ensure project sustainability. Full article

Development of forming methods for surface-coated metals is a current concern due to their economic and environmental advantages. For a successful forming operation, it is necessary that both components, the substrate and the coating, are able to withstand stress without damage until the final shape and dimensions are reached. This goal can be achieved through good knowledge of the elastic and plastic properties of the substrate and the coating, the compatibility between them, the appropriate surface treatment, and the rigorous control of technological forming parameters. Our study was carried out with flat specimens of pre-painted Al 99.0 sheet that were electromagnetically formed by bulging. Forming behavior was investigated as depending on the initial thickness of the substrate, on the aluminum sheet pretreatment, as well as on the plastic deformation path of the metal–paint structure. To verify the damage to the paint layer, tests with increasing strains were performed, and the interface between the metal and the coating layer was investigated by scanning electron microscopy. The obtained results indicate that electromagnetic forming of pre-painted sheets can be a feasible method for specific applications if the forming degree of the substrate is tightly correlated with the type of desired coating and with the pretreatment method used for the metal surface. Full article

In recent years, biofuels and bioenergy derived from algae have gained increasing attention, fueled by the growing demand for renewable energy sources and the urgent need to lower CO₂ emissions. This research examines the generation of bioethanol and biomethane using freshly harvested and sedimented algal biomass. Employing a factorial experimental design, various trials were conducted, with ethanol yield as the primary optimization target. The findings indicated that the sodium hydroxide concentration during pretreatment and the amylase dosage in enzymatic hydrolysis were key parameters influencing the ethanol production efficiency. Under optimized conditions—using 0.3 M NaOH, 25 μL/g starch, and 250 μL/g cellulose—fermentation yielded ethanol concentrations as high as 2.75 ± 0.18 g/L (45.13 ± 2.90%), underscoring the significance of both enzyme loading and alkali treatment. Biomethane potential tests on the residues of fermentation revealed reduced methane yields in comparison with the raw algal feedstock, with a peak value of 198.50 ± 25.57 mL/g volatile solids. The integrated process resulted in a total energy recovery of up to 809.58 kWh per tonne of algal biomass, with biomethane accounting for 87.16% of the total energy output. However, the energy recovered from unprocessed biomass alone was nearly double, indicating a trade-off between sequential valorization steps. A comparison between fresh and dried feedstocks also demonstrated marked differences, largely due to variations in moisture content and biomass composition. Overall, this study highlights the promise of integrated algal biomass utilization as a viable and energy-efficient route for sustainable biofuel production. Full article