Search Results (51)

Seismic responses of Nuclear Island (NI) structures have great significance in the foundation adaptability analysis and the seismic design of equipment. However, with the increasing complexity of nuclear power site conditions, establishing a reasonable and effective soil–pile–structure dynamic interaction model has become the key technical problem that needs to be solved. In this study, a pseudo three-dimensional soil–pile–structure dynamic interaction model considering soil nonlinearity and heterogeneity is developed for seismic response analysis of NI structures. Specifically, the nonlinearity of the near-field soil is described via the equivalent linear method, the radiation damping effect of half space is simulated through viscous boundary, and the displacement/stress conditions at lateral boundaries of the heterogeneous site are derived from free-field response analysis. Meanwhile, an equivalent stiffness–mass principle is established to simplify NI superstructures, while pile group effects are incorporated via a node-coupling scheme within the finite-element framework. Two validation examples are presented to demonstrate the accuracy and efficiency of the proposed model. Finally, seismic response analysis of two typical NI structure of reactor types (CPR1000 and AP1000) based on the actual complex site conditions in China is also presented to study the effect of radiation damping, soil conditions, and pile foundation. Key findings demonstrate the necessity of integrating SSI effects and nonlinear characteristics of non-rock foundations. While the rock-socketed pile exhibits superior performance compared to the CFG pile alternative; this advantage is offset by higher costs and construction complexity. The research findings can serve as a valuable reference for the foundation adaptability analysis and optimizing the design of equipment under the similar complex condition of the soil site. Full article

The pile group-pile cap structure is a key foundation form for deep-water bridges. However, current effective methods for calculating the earthquake-induced hydrodynamic forces on pile caps with arbitrary cross-sections remain insufficient. In this study, the hydrodynamic force is considered as the added mass, and the dynamic equilibrium equations of the isolated pile cap structure (IC model) and the pile group-pile cap structure (PC model) under earthquakes are established, respectively, based on the structural dynamics theory. Correspondingly, the relationships between the hydrodynamic added masses and the fundamental frequencies in the IC model and the PC model are derived, respectively. The fundamental frequencies of the IC model and the PC model are obtained by numerical models built with the ABAQUS (2019) finite element software, and then the added masses on the IC and PC models are calculated accurately. The calculation method proposed in this study avoids the complex fluid–structure interaction problem, which can be applied for the seismic design of deep-water bridge substructures in real practice. Full article

The spacing between piles plays a crucial role in determining the load-bearing capacity of CEP group pile foundations equipped with a bearing platform. In this research, five sets of six-pile models with different pile spacings were created using ANSYS finite element analysis. To understand how damage impacts the system, this study examined displacement patterns and stress distribution within both the piles and the adjacent soil. Additionally, the force interaction between the piles and soil was explored to uncover the underlying failure mechanisms. The results shed light on how varying pile spacing affects the overall bearing capacity of the foundations. Based on our thorough analysis, we pinpoint the most effective pile spacing configuration. The findings reveal that, generally speaking, increasing the distance between piles tends to boost the load-bearing capacity of the entire group foundation. However, this relationship is not linear; once the spacing surpasses four times the cantilever’s diameter, further widening does not yield noticeable gains in performance. In real-world scenarios, it is advisable to keep the spacing between 3.5 to 4 times the cantilever diameter for optimal results. Moreover, the stability of the bearing platform and the plate plays a vital role in resisting sideways forces. Ensuring that the shear strength of the surrounding soil aligns with established standards is essential for maintaining the overall durability and safety of the group pile system. Full article

This study investigates the stability of high-rise wind turbine tower foundations in collapsible loess regions through finite element analysis. The mechanisms by which wind load, extreme rainfall load, and seismic load interact during the dynamic response of a pile foundation under single-action and intercoupling conditions are analyzed. A comprehensive multi-parameter analytical model is developed to evaluate pile foundation stability, incorporating key indicators including pile skin friction, average axial stress of pile groups, horizontal displacement at pile tops, and pile inclination. The results show that, among single-load conditions, seismic loading has the most pronounced impact on foundation stability. The peak horizontal displacement at the pile top induced by seismic loads reaches 10.07 mm, substantially exceeding the effects of wind and rainfall loads, posing a direct threat to wind turbine tower safety. Under coupled loading conditions, notable nonlinear interaction effects emerge. Wind–earthquake coupled loading amplifies horizontal displacement by 1.85 times compared to single seismic loading. Rainfall–earthquake coupled loading reduces the peak of positive skin friction by 20.17%. Notably, all seismic-involved loading combinations significantly compromise the pile foundation safety margin. The seismic load is the dominant influencing factor in various loading conditions, and its coupling with other loads induces nonlinear superposition effects. These findings provide critical insights for wind turbine foundation design in collapsible loess areas and strongly support the need for enhanced seismic considerations in engineering practice. Full article

Pile foundations are commonly used to support structures subjected to complex loading conditions. In seismic-prone regions, understanding the soil–pile interaction under cyclic loading is essential for ensuring the stability and safety of these foundations. Numerical modeling is an effective tool for predicting the nonlinear behavior of soil under seismic excitation, but selecting an appropriate constitutive model remains a significant challenge. This study investigates the seismic behavior of pile groups embedded in soft clay using advanced finite element analysis. The piles are modeled as aluminum with a linear elastic response and are analyzed within a soil domain characterized by two kinematic hardening constitutive models based on the Von Mises failure criterion. Model parameters are calibrated using a combination of experimental and numerical data. The study also examines the influence of pile spacing within the group on seismic response, revealing notable differences in the response patterns. The results show that the nonlinear kinematic hardening model provides a more accurate correlation with experimental centrifuge test results compared to the multilinear model. These findings contribute to enhancing the understanding of soil–pile interaction under seismic loading and improving the design of pile foundations. Full article

In order to study the bearing characteristics of pile groups under the coupling of multiple caves, the influence of the interaction between the crossing cave, the underlying inclined cave, the pile-side cave, and the underlying cave on the ultimate bearing capacity, axial force, lateral friction, and load sharing ratio of the pile group was analyzed based on the model test. The research results show the following: (1) Due to the existence of the underlying cave, the Q-S curves of the pile groups are all steep drop types, and they show the characteristics of end-bearing piles. The influence of other caves is not obvious; the existence of beaded caves, lower crossing caves, underlying inclined caves, upper crossing caves, and pile-side caves will reduce the ultimate bearing capacity of the pile group. The reduction in the ultimate bearing capacity is 7.38%, 4.94% for the lower crossing cave, 2.59% for the underlying inclined cave, 2.27% for the upper crossing cave, and 0.74% for the pile-side cave. (2) When the pile body passes through the cave, the axial force changes slightly in the overburden layer, changes greatly in the limestone layer, and remains unchanged in the cave; under the same load level, the axial force of the pile close to the underlying inclined cave and the pile-side cave is smaller than that of the pile farther away. (3) Under the same load level, the lateral friction of the pile foundation shows a decreasing trend in the sand layer and limestone layer. The friction inside the sand layer is small. After entering the lime layer, the lateral friction increases sharply. The lateral friction is approximately 0 within the cave range. After passing through the cave, the lateral friction increases sharply. (4) The underlying inclined cave and the pile-side cave do not affect the position of the peak point of the pile foundation. The existence of the cave makes the pile foundation increase the peak point at the exit of the cave; under the same load level, the lateral friction of the pile close to the underlying inclined cave and the pile-side cave is larger than that of the pile farther away. (5) The existence of beaded caves, lower crossing caves, underlying inclined caves, upper crossing caves, and pile-side caves will increase the proportion of pile end resistance by 6.95%, 4.23%, 0.94%, 0.77%, and 0.62%, respectively. (6) This study systematically analyzed the differences in the degree of influence of different types of caves (including crossing caves, underlying inclined caves, and pile-side caves) on the bearing characteristics of pile foundations under the condition of the existence of underlying caves. It was found that beaded caves > lower crossing caves > underlying inclined caves > upper crossing caves > pile-side caves, which provides a priority decision-making basis for the optimal design of cave treatment schemes in engineering practice. Full article

The seismic behavior of pile-supported structures is influenced by complex interactions between inertial force and kinematic force mainly drawn by soil properties and superstructure characteristics. This study aims to investigate the combined effects of inertial and kinematic interaction on the dynamic response of pile foundations under seismic loading. To achieve this, three-dimensional numerical simulations were conducted using FLAC3D, based on a bridge substructure model. A total of twelve analysis cases were developed by varying input seismic motion levels, soil relative densities, and pile cap masses. The results demonstrate that kinematic force effects become more dominant in dense soils as seismic intensity increases, resulting in greater velocity responses and internal forces in the pile cap. Meanwhile, inertial forces from heavier superstructures interacted with kinematic force effects in a resistive manner, particularly under embedded pile cap conditions. The displacement of pile foundations remained within serviceable limits in all cases, although structural demands would be elevated under certain conditions. These findings confirm the significance of accounting for both inertial and kinematic effects in seismic design and highlight the importance of site-specific soil conditions. Full article

The NT-CEP pile is an innovative type of pile that builds upon the conventional concrete straight-hole cast-in-place pile. It primarily consists of two components: the main pile and the bearing plate. The key factors influencing its load-bearing capacity include the pile diameter, the cantilever dimensions of the bearing plate, and the slope of the bearing plate’s foot, among others. The pile spacing significantly influences the bearing capacity of NT-CEP pile group foundations. The overall bearing capacity of an NT-CEP pile group foundation is not merely the sum of the ultimate bearing capacities of individual piles; rather, it results from the interactions among the pile bodies, the cap, and the foundation soil. Advancing the design theory of NT-CEP pile groups and enhancing their practical applications in engineering requires an in-depth investigation of how different pile spacings influence the load-bearing performance of pile group foundations. This objective can be achieved by exploring the soil damage mechanisms around side, corner, and central piles. This exploration helps in clarifying the influence of pile spacing on the load-bearing performance. Based on research findings regarding the bearing capacity of single and double pile foundations, this paper utilizes ANSYS finite element simulation analysis to model six-pile and nine-pile groups. Because these arrangements are universally adopted in engineering practice, they are capable of accounting for the pile group effect under various pile spacings and row configurations. The nine-pile group comprises corner piles, side piles, and a center pile, enabling a comprehensive analysis of stress variations among piles at different positions. As six-pile and nine-pile groups represent common pile configurations, studying these two types can provide valuable insights and direct references for optimizing pile foundation design. The study systematically investigates the influence of varying piles spacings on the bearing capacity of NT-CEP pile group foundations. It concludes that, as pile spacing decreases, The displacement of the top of this pile increases. thereby enhancing the group piles effects. Conversely, increasing the spacing between piles represents an effective strategy for elevating the compressive capacity of the NT-CEP pile-group foundation. Larger spacing also increases the vertical load-bearing capacity of the central piles, enhances the lateral friction resistance of corner piles, and heightens the load-sharing proportion between the bearing plate and the pile end. Furthermore, increasing pile spacing raises the ratio of load sharing by the foundation soil for both the CEP nine-pile foundation and the CEP six-pile foundation. The reliability of the simulation study has been verified by a visualization small scale model test of a half cut pile. Full article

With the rapid development of urbanization and infrastructure construction, the requirements for the foundation design of high-rise buildings and large bridges are increasing. Pile foundations, as important supporting structures, are widely used in weak foundations and high-rise buildings. However, pile groups show significant advantages in bearing capacity, settlement control, and structural stability, while also bringing complex pile–soil interactions and group pile effects. Based on an FLAC3D numerical simulation (version 3.0), this paper constructs a pile group composite foundation model under different pile length conditions and analyzes the influence of pile–soil interaction on the group pile effect. The results show that pile length has a significant impact on the settlement and bearing capacity of the pile group composite foundation. When the pile length exceeds a certain critical value (23.4 m in this study), the interaction between piles is enhanced, the bearing capacity of the soil between piles is improved, the pile–soil stress ratio is reduced, and the overall settlement is effectively controlled. Moreover, there are obvious differences in settlement and stress distribution between pile group composite foundations and single-pile composite foundations, and the group pile effect can lead to greater settlement and more complex stress distribution. Therefore, when designing pile group composite foundations, factors such as pile length, pile spacing, and geological conditions should be fully considered to optimize foundation performance. This study provides a theoretical basis and reference for the design and optimization of pile group composite foundations, highlighting the importance of considering pile length and pile–soil interaction in practical engineering applications. Full article

With the continuous increase in bridge lifespans, the rapid check and evaluation of the vertical bearing capacity for the pile foundations of existing bridges have been in greater demand. The usual practice is to carry out compression bearing tests under static loads in order to obtain the accurate ratio of the dynamic to static stiffness. However, it is difficult and costly to conduct in situ experiments for each pile foundation. Herein, a rapid evaluation method to measure the vertical bearing capacity of bridge pile foundations is proposed. Firstly, a 3D-bearing cap–pile group–soil interaction model was established to simulate a bearing test of a pile foundation that was subject to static loads and dynamic loads, and then the numerical results were validated by in situ dynamic and static loading tests on an abandoned bridge pier with the same pile group foundation; the dataset for machine learning was constructed using the numerical results, and finally, the bearing capacity of the pile foundation could be predicted rapidly. The results show the following outcomes: the established numerical model can effectively simulate dynamic and static loading tests of pile foundations; the intelligent prediction model based on machine learning can predict the ratio of static stiffness to dynamic stiffness and can thus rapidly evaluate the vertical residual bearing capacity and the designed ultimate loading capacity, allowing for the nondestructive testing and evaluation of the pile foundations of existing bridges. Full article

In many tasks of railway vibration, the structure, that is, the track, a bridge, and a nearby building and its floors, is coupled to the soil, and the soil–structure interaction and the damping by the soil should be included in the analysis to obtain realistic resonance frequencies and amplitudes. The stiffness and damping of a variety of foundations is calculated by an indirect boundary element method which uses fundamental solutions, is meshless, uses collocation points on the boundary, and solves the singularity by an appropriate averaging over a part of the surface. The boundary element method is coupled with the finite element method in the case of flexible foundations such as beams, plates, piles, and railway tracks. The results, the frequency-dependent stiffness and damping of single and groups of rigid foundations on homogeneous and layered soil and the amplitude and phase of the dynamic compliance of flexible foundations, show that the simple constant stiffness and damping values of a rigid footing on homogeneous soil are often misleading and do not represent well the reality. The damping may be higher in some special cases, but, in most cases, the damping is lower than expected from the simple theory. Some applications and measurements demonstrate the importance of the correct damping by the soil. Full article

Designing petroleum tanks that are inter-related with pipelines in a founding position containing very compressible soil are a challenging task, particularly when a possible high-water table and considerably high seismicity are also present. Some of the issues that occur are the problems of the time dependence of settlement behavior as well as the earthquake response of the soil–structure interaction system. This work intends to portray the following: (a) an estimation of the foundations and the corresponding consolidation time response and (b) the earthquake-induced geohazard as well as the soil–structure interaction considered for the foundation of the tanks alongside pipelines in a suburban area in Greece, namely Kalochori of Thessaloniki. A numerical analysis considering the dynamic and static behavior and inter-relation among the soil mass and the buried pipeline alongside the system of the foundation type and the soil beneath is performed. Also, the foundation type that was finally chosen as the optimized solution, namely the set of gravel piles and the subsequent prestress loading, is presented and discussed. Taking into account that the soil in the vicinity of the foundation will have its shear strength during an earthquake decreased to almost zero, risk reduction actions may be suggested for large stresses imposed on the pipeline. The methodology for the dimensionality of the gravel pile group as well as the preloading session indicate that a substantial reduction in the displacements of more than 50% is obtained with the combination of the methods, something that would not be feasible if the methods were implemented individually. Full article

In extreme marine environments, the interaction between offshore wind turbine pile foundations (OWTPFs) is critical, and the associated hydrodynamic loads are complex. This study focused on fixed OWTPFs and used computational fluid dynamics (CFD) to numerically simulate the flow field around pile foundations under the combined action of focusing waves and current. The objective was to investigate the influence of different focusing wave and current parameters on the hydrodynamic properties of the pile foundations. The findings indicate the following: (1) When the wave and current directions are opposite, the maximum wave force on the pile foundations is greater than when they are aligned. (2) Large-amplitude focusing waves around pile foundations generate secondary loads, which are nonlinear and lead to a rapid increase in the wave force. These secondary loads are short-lived and particularly prominent near the front row of pile foundations. (3) The influence of the group pile effect diminishes under high-amplitude waves, where the wave component dominates the generation of the dimensionless wave force, and the impact of the current on this force decreases. Full article

Micropile groups (MPGs) are typical landslide resistant structures. To investigate the effects of these two factors on the micropile–soil interaction mechanism, seven sets of transparent soil model experiments were conducted on miniature cluster piles. The soil was scanned and photographed, and the particle image velocimetry (PIV) technique was used to obtain the deformation characteristics of the pile and soil during lateral loading. The spatial distribution information of the soil behind the pile was obtained by a 3D reconstruction program. The results showed that a sufficient roughness of the pile surface was a necessary condition for the formation of a soil arch. If the surface of the pile was smooth, stable arch foundation formation was difficult. When the roughness of the pile surface increases, the soil arch range behind the pile and the load-sharing ratio of the pile and soil will increase. After the roughness reaches a certain level, the above indicators hardly change. Pile spacing within the range of 5–7 d (pile diameters) was suitable. The support effect was poor when the pile spacing was too large. No stable soil arch can be formed, and the soil slips out from between the piles. Full article

With the “Talents Internship program” established by the Austrian Research Promotion Agency (FFG, Österreichische Forschungsförderungsgesellschaft), 14- to 17-year-old students from various school types visited the Natural History Museum and the Kuratorium Pfahlbauten in summer 2022 to gain practical experience in research. The internship focused on a sustainability approach, discussing recycling methods, the sustainable use of resources and the circular economy in prehistory. The UNESCO World Heritage “Prehistoric Pile Dwellings around the Alps” was used as a research area for the project. The project also aimed to make the content developed by the students available to the public as a digital media tool. The pupils brought an illustration of a prehistoric lake shore settlement to life and created an interactive image available at the website of Kuratorium Pfahlbauten. Various scenes of the illustration have been augmented with animations created by the students of HTL Spengergasse in Vienna. Students from federal secondary schools from Vienna (Stubenbastei) and Upper Austria (Traun) researched the information about the objects and wrote texts that, as a description of the animated videos, introduce the users to the prehistoric artifact and explain the recycling process behind it. The students worked independently using the scientific literature, 140-year-old inventory books and 6000-year-old objects from the collection of the Natural History Museum Vienna. The activities and the supporting program within the internship were recorded by the students in blog posts, available at the Pfahlbauten-Blog. The co-creative approach of the FFG Talent Internship made it possible to introduce a group of school students to the process of scientific work and the communication of results. It was honored with the Creative App Award at CHNT 2023. Full article