Search Results (52)

Finding high-performance and low-cost materials is essential for high-quality photocatalytic water purification to expand the spectral response and improve light utilization. In this paper, we used relatively inexpensive materials such as Ag and TiO₂. The influence of particle spacing, core radius, shell thickness, environmental refractive index, and incident light direction angle on the light absorption and scattering properties, local electric field enhancement, and photothermal effect of the Ag@TiO₂ core–shell nanosphere dimer is investigated by using the finite element method and the finite difference time domain. The formation mechanism of multipole resonance mode of the dimer is revealed by means of the multipole decomposition theory and the internal current distribution of the particles. The results show that light absorption and scattering of the dimer can be tuned within the visible light range by changing the particle spacing, core radius, and shell thickness. With the azimuth angle of incident light increases, the longitudinal local surface plasmon resonance (L-LSPR) mode will transform into the transverse local surface plasmon resonance (T-LSPR) mode, and the L-LSPR mode makes the dimer have better local electric field enhancement. Strong light absorption can easily cause a sharp increase in the temperature around the dimer, accelerating the rate of catalytic oxidation reactions and the elimination of bacteria and viruses in water. Strong light scattering causes a significant enhancement of the electric field between the particles, making the generation of hydroxyl and other active oxides more efficient and convenient. This work establishes a theoretical basis for designing efficient water purification photocatalysts. Full article

Traditional infrared thermography (IRT) techniques can only provide two-dimensional (2D) projections of surface temperatures, and it is difficult to intuitively present the surface profile of the three-dimensional (3D) structure and the spatial distribution of the internal defects. In this paper, a low-cost, high efficiency and high precision photothermal 3D tomography technology was proposed by combing 3D thermography and infrared tomography for the first time. Specifically, this paper abandoned additional 3D sensors and complex motion systems such as robotic arms and scanning platforms. Differently, it utilized a galvanometer to deflect laser for line structure light scanning, and captured the thermal stripes generated on the structural surface using an infrared camera, and then realized the highly efficient 3D reconstruction; moreover, this work introduced undersampling strategy into photothermal coherence tomography (PCT) technology to enhance the ranging depth, and the ranging results were transmitted to the 3D coordinate system, so as to realize the photothermal 3D tomography. Through the detection experiments of metal additive manufacturing parts, it was shown that the proposed method could reconstruct the 3D contour of the specimen, and identified the first heterogeneous interface below the surface of the specimen. Full article

Laser energy is widely used as a selective photothermal heating agent in cancer treatment, standing out for not relying on ionizing radiation. However, in vivo tests have highlighted the need to develop irradiation techniques that allow precise control over the illuminated area, adapting it to the tumor size to further minimize damage to surrounding healthy tissue. To address this challenge, a proof of concept based on a laser irradiation system has been designed, enabling control over energy, exposure time, and irradiated area, using galvanometric mirrors. The control software, implemented in Python, employs a set of cameras (visible and infrared) to detect and monitor real-time thermal distributions in the region of interest, transmitting this information to a microcontroller responsible for adjusting the laser power and controlling the scanning process. Image alignment procedures, tunning of the controller’s gain parameters and the impact of the different engineering parameters are illustrated on a dedicated setup. As proof of concept, this approach has demonstrated the ability to irradiate a phantom of black modeling clay within an area of up to 5 cm × 5 cm, from 15 cm away, as well as to monitor and regulate the temperature over time (5 min). Full article

Local temperature measurement is crucial for understanding nanoscale thermal transport and developing nanodevices for biomedical, photonic, and optoelectronic applications. The rise of photothermal therapy for cancer treatment has increased the demand for high-resolution nanothermometric techniques capable of non-contact intracellular temperature measurement and modification. Raman spectroscopy meets this need: the ratio of anti-Stokes to Stokes Raman intensities for a specific vibrational mode correlates with local temperature through the Boltzmann distribution. The present study proposes a novel photothermal therapy agent designed to advance the current state of the art while adhering to green chemistry principles, thereby favoring low-temperature synthesis involving limited energy consumption. A key challenge in this field is to achieve close contact between plasmonic nanosystems, which act as nanoheaters, and local temperature sensors. This is achieved by employing silver nanoparticles as a heat release agent, coated with anatase-phase titanium dioxide, as a local temperature sensor. The proposed synthesis, which combines refluxing and subcritical solvothermal treatments, enables direct anatase formation, despite its metastability under standard conditions, thus eliminating the need for a calcination step. Structural characterization through SAED-HRTEM and Raman spectroscopy confirms the successful crystallization of the desired phase. Moreover, the nanothermometry measurements conducted at various wavelengths ultimately demonstrate both the effectiveness of these nanomaterials as thermometric probes, with a relative sensitivity of about 0.24 K⁻¹%, and their capability as local heaters, with a release of a few tens of degrees. This work demonstrates a new synthetic strategy for these nanocomposites, which offers a promising pathway for the optimization of nanosystems in therapeutic applications. Full article

This study introduces an innovative analytical solution to the time-fractional Cattaneo heat conduction equation, which models photothermal transport in metallic thin films subjected to short laser pulse irradiation. The model integrates the Caputo fractional derivative of order 0 < p ≤ 1, addressing non-Fourier heat conduction characterized by finite wave speed and memory effects. The equation is nondimensionalized through suitable scaling, incorporating essential elements such as a newly specified laser absorption coefficient and uniform initial and boundary conditions. A hybrid approach utilizing the finite Fourier cosine transform (FFCT) in spatial dimensions and the Laplace transform in temporal dimensions produces a closed-form solution, which is analytically inverted using the two-parameter Mittag–Leffler function. This function inherently emerges from fractional-order systems and generalizes traditional exponential relaxation, providing enhanced understanding of anomalous thermal dynamics. The resultant temperature distribution reflects the spatiotemporal progression of heat from a spatially Gaussian and temporally pulsed laser source. Parametric research indicates that elevating the fractional order and relaxation time amplifies temporal damping and diminishes thermal wave velocity. Dynamic profiles demonstrate the responsiveness of heat transfer to thermal and optical variables. The innovation resides in the meticulous analytical formulation utilizing a realistic laser source, the clear significance of the absorption parameter that enhances the temperature amplitude, the incorporation of the Mittag–Leffler function, and a comprehensive investigation of fractional photothermal effects in metallic nano-systems. This method offers a comprehensive framework for examining intricate thermal dynamics that exceed experimental capabilities, pertinent to ultrafast laser processing and nanoscale heat transfer. Full article

Cancer remains one of the leading causes of death worldwide. Therefore, the continuous development of effective therapeutic strategies is necessary. Conventional anticancer chemotherapy has low bioavailability and poor systemic distribution, resulting in serious side effects and limited therapeutic efficacy. To address these limitations, drug delivery systems that respond to external stimuli have been developed to release drugs at specific sites. In this study, a phase transition-based bubble-mediated emulsion system was developed to enable near-infrared (NIR)-induced drug release. This system consists of an oil phase, 2H,3H-perfluoropentane (PFC), a fluorinated liquid gas that evaporates at a certain temperature, and encapsulated IR-780 and paclitaxel to maintain stable microbubbles. Under NIR irradiation, IR-780 exhibits a photothermal conversion effect, which increases the temperature. Above the critical temperature, PFC undergoes a phase transition into gas, forming gas bubbles. This phase transition leads to a rapid volume expansion, destroys the microbubble structure, and triggers drug release. The NIR-responsive microbubble system developed in this study facilitated targeted and selective drug release through precise temperature control using the photothermal effects and phase transition. This system provides a novel platform to improve the efficacy of cancer therapies. Full article

The exploration of the coupling trend between urban agglomeration development (UAD) and land surface temperature (LST) expansion is of great significance, and it is of scientific value for the regulation of the thermal environment of urban agglomerations, the optimization of urban spatial planning, and the achievement of sustainable urban development. This study employs an array of remote sensing datasets from multiple sources—employing a multi-faceted approach encompassing an overall coupling situation analysis model, a coordination and evaluation system, a geographically weighted spatial autocorrelation algorithm, and landscape pattern quantification indicators—to explore the mutual feedback mechanism and spatial coupling characterization of LST and UAD in the Guanzhong Plain Urban Agglomeration (GZPUA). The results of the study can provide data support for urban spatial planning and thermal environment regulation. The results indicate the following findings: (1) In the GZPUA, the nighttime light (NTL) and land surface temperature (LST) centroids show a significant tendency toward approaching one another, with a spatial offset decreasing from 45.0 km to 9.1 km at the end, indicating a strengthening trend in the photothermal system’s coupling synergy. (2) The coordination of light and heat in the study area exhibits significant non-equilibrium development, with a dynamic trend of urban development space shifting towards the southwest. It confirms the typical regional response law of rapid urbanization. (3) The Moran’s I index of the photothermal system in the study area increased from 0.289 to 0.335, an increase of 15.9%. The proportion of “high–high” (H-H)/“low–low” (L-L)-type regions with clustering distribution of cold and hot spots reaches 58.01%, and their spatial continuity characteristics are significantly enhanced, indicating a significant trend of spatial structural integration between urban heat island effect and construction land expansion. Full article

The interaction between terahertz (THz) photons and phonons of materials is crucial for the development of THz photonics. In this work, typical two-dimensional (2D) van der Waals (vdW) transition metal chalcogenide (TMD) layers and heterostructures are used in THz time-domain spectroscopy (TDS) measurements, low-wavenumber Raman spectroscopy measurements, calculation of 2D materials’ phonon spectra, and theoretical analysis of thermal responses. The TDS results reveal strong absorption of THz photons in the frequency range of 2.5–10 THz. The low-wavenumber Raman spectra show the phonon vibration characteristics and are used to establish phonon energy bands. We also set up a computational simulation model for thermal responses. The temperature increases and distributions in the individual layers and their heterostructures are calculated, showing that THz photon absorption results in significant increases in temperature and differences in the heterostructures. These give rise to interesting photothermal effects, including the Seebeck effect, resulting in voltages across the heterostructures. These findings provide valuable guidance for the potential optoelectronic application of the 2D vdW heterostructures. Full article

Self-excited systems rely on stable external stimuli to initiate and sustain oscillations via internal processes. However, these oscillations can compromise system stability and increase friction, limiting their practical applications. To overcome this issue, we propose the light-fueled stable self-rolling of a liquid crystal elastomer (LCE)-based wheel. A photothermal response model based on an LCE was used to analyze the temperature distribution within the LCE rods. The driving torque for self-rolling is generated by the contraction resulting from the LCE’s photothermal response, which displaces the wheel’s center of mass. We then derived the equilibrium equations and identified the critical conditions for achieving stable self-rolling motion. Through the interaction between the temperature field and driving torque, the wheel achieves continuous and stable self-rolling by absorbing thermal energy to counteract damping dissipation. Numerical simulations revealed that the stable self-rolling velocity is influenced by several key parameters, including heat flux, the contraction coefficient, gravitational acceleration, the initial damping torque, and the rolling damping coefficient. The proposed LCE-based wheel enhances system stability and significantly reduces frictional losses. These characteristics make it a promising candidate for applications in autonomous drive systems, micro-transportation devices, and photothermal energy conversion technologies. Full article

The problem of antibiotic abuse and drug resistance is becoming increasingly serious. In recent years, polydopamine (PDA) nanoparticles have been recognized as a potential antimicrobial material for photothermal therapy (PTT) due to their excellent photothermal conversion efficiency and unique antimicrobial ability. PDA is capable of rapidly converting light energy into heat energy under near-infrared (NIR) light irradiation to kill bacteria efficiently. In order to solve the problem of PDA’s tendency to aggregate and precipitate, this study improved its stability by grafting hyaluronic acid (HA) onto the surface of PDA. Using dopamine and hyaluronic acid as raw materials, hyaluronic acid (HA) was grafted onto polydopamine (PDA) nanoparticles via self-polymerization and Michael addition reactions under alkaline conditions to obtain PDA-HA-modified nanoparticles. We confirmed the successful grafting of hyaluronic acid via scanning electron microscopy (SEM), Fourier infrared spectroscopy (FTIR), nuclear magnetic hydrogen spectroscopy (¹H NMR), ultraviolet–visible spectroscopy (UV–vis), Raman spectroscopy (Raman), and dynamic light scattering (DLS) methods. Scanning electron microscopy (SEM) was used to observe the surface morphology and nanostructure of the grafted materials, providing information on the morphology and size distribution of the materials. Near-infrared performance experiments showed that the temperature of the PDA-HA solution increased rapidly under near-infrared light irradiation, demonstrating an excellent photothermal conversion performance. Antimicrobial properties were assessed via the colony counting method, and typical Gram-positive bacteria S. aureus and Gram-negative bacteria E. coli were selected as model strains. The experimental groups were tested under dark conditions and near-infrared (NIR) light irradiation. PDA/HA showed significant photothermal properties under NIR light irradiation, resulting in a rapid increase in the surrounding temperature to a level sufficient to kill bacteria. Under NIR light irradiation, PDA/HA exhibited 100% antimicrobial efficacy against both S. aureus and E. coli, while antimicrobial efficacy was limited under dark conditions. This indicates that the antibacterial activity of PDA/HA is highly dependent on NIR light activation. Full article

The development of absorber materials with strong light absorption properties and low-cost fabrication processes is highly significant for the application of photothermal conversion technology. In this work, a mixed powder consisting of NaCl, polypropylene (PP), and scale-like carbon flakes was ultrasonically pressed into sheets, and the NaCl was then removed by salt dissolution to obtain porous carbon polypropylene composite sheets (P-CPCS). This process is simple, green, and suitable for the low-cost, large-area fabrication of P-CPCS. P-CPCS has a well-distributed porous structure containing internal and external connected water paths. Under the dual effects of the carbon flakes and porous structure, P-CPCS shows excellent photothermal conversion performance in a broad wavelength range. P-CPCS-40 achieves a high temperature of 128 °C and a rapid heating rate of 12.4 °C/s under laser irradiation (808 nm wavelength, 1.2 W/cm² power). When utilized for solar steam generation under 1 sun irradiation, P-CPCS-40 achieves 98.2% evaporation efficiency and a 1.81 kg m⁻² h⁻¹ evaporation rate. This performance means that P-CPCS-40 outperforms most other previously reported absorbers in terms of evaporation efficiency. The combination of carbon flakes, which provide a photothermal effect, and a porous polymer structure, which provides light-capturing properties, opens up a new strategy for desalination, sewage treatment, and other related fields. Full article

In recent years, dental implants have become increasingly popular around the world. However, if the implant is not properly managed, inflammation may occur, and the implant itself may need to be removed. Peri-implantitis is a common inflammation that occurs in dental implants, and various laser treatments have recently been studied to eliminate it. In this study, the situation of removing peri-implantitis using photothermal therapy, one of the various laser treatments, was analyzed theoretically and numerically. The temperature distribution in the tissue for various laser irradiation locations, angles, and power was calculated based on heat transfer theory, and the degree of thermal damage to tissue was analyzed using the Arrhenius damage integral. In addition, the thermally damaged region ratio of inflamed and normal tissue was analyzed using the Arrhenius thermal damage ratio and normal tissue Arrhenius thermal damage ratio to confirm the trend of treatment results for each treatment condition. The results of the study showed that if only the thermal damage to the inflamed tissue is considered, the laser should be angled vertically, and the laser should be applied to the center of the inflamed tissue rather than close to the implant. However, if the thermal damage to the surrounding normal tissue is also considered, it was found that the laser should be applied at 1.0 mm from the right end of the inflamed tissue for maximum effect. This will allow for more accurate clinical treatment of peri-implantitis in the future. Full article

The objective of this investigation was to fabricate a photothermally responsive composite bone scaffold aimed at facilitating bone tissue regeneration and remedying bone defects via mild thermal stimulation. The photothermal-sensitive nanomaterial SiO₂ coated Fe₃O₄ (SiO₂@Fe₃O₄), synthesized through the hydrolysis–condensation process of tetraethyl orthosilicate (TEOS), displayed a uniform distribution of SiO₂ coating, effectively preventing the aggregation of Fe₃O₄ particles within the scaffold matrix. The composite scaffold containing 5% mass fraction of photothermal-sensitive nanoparticles exhibited evenly dispersed microstructural porosity, a compressive strength of 5.722 MPa, and a water contact angle of 58.3°, satisfying the mechanical property requisites of cancellous bone while demonstrating notable hydrophilic characteristics. Upon exposure to near-infrared light at ambient temperature, the 5% composite scaffold underwent a temperature elevation of 3–6 °C within 40–45 s, attaining a temperature range (40–43 °C) conducive to fostering osteogenic differentiation. Experimental findings validated that the SiO₂@Fe₃O₄/polyvinyl alcohol (PVA)/hydroxyapatite (HA)/polycaprolactone (PCL)/β-tricalcium phosphate (β-TCP) bone scaffold showcased outstanding mechanical and photothermal attributes, thereby presenting a pioneering avenue for advancing bone tissue cell proliferation and addressing bone defect rehabilitation. Full article

Silver nanoparticles (Ag NPs) have been produced by low-dose (1–20 kGy) gamma irradiation of silver nitrate in the presence of graphene-based material (graphene oxide or electrochemically exfoliated graphene). The large surface area of those graphene-based materials combined with the presence of oxygen-containing functional groups on the surface provided successful nucleation and growth of Ag nanoparticles, which resulted in a uniformly covered graphene surface. The obtained Ag nanoparticles were spherical with a predominant size distribution of 10–50 nm for graphene oxide and 10–100 nm for electrochemically exfoliated graphene. The photothermal efficiency measurement showed a temperature increase upon exposure to a 532 nm laser for all samples and the highest photothermal efficiency was measured for the graphene oxide/Ag NP sample prepared at 5 kGy. Electromagnetic interference (EMI) shielding efficiency measurements showed poor shielding for the composites prepared with graphene oxide. On the other hand, all composites prepared with electrochemically exfoliated graphene showed EMI shielding to some extent, and the best performance was measured for the samples prepared at 5 and 20 kGy doses. Full article

An investigation was conducted to examine the photothermal and thermomechanical effects of short-pulse laser irradiation on normal tissues. This study analyzed the impact of short-pulse laser radiation on the heat-affected region within tissues, taking into consideration a set of laser variables, namely wavelength, intensity, beam size, and exposure time. The beam size ranged between 0.5 and 3 mm, and the intensity of the laser radiation ranged from 1 to 5 W/mm² at wavelengths of 532 and 800 nm. A three-layered, three-dimensional model was implemented and studied in a polar coordinate system (r = 10 mm, z = 12 mm) in COMSOL Multiphysics (version 5.4, COMSOL Inc., Stockholm, Sweden) to perform numerical simulations. The Pennes bioheat transfer model, Beer-Lambert, and Hooke’s law are integrated to simulate the coupled biophysics problem. Temperature and stress distributions resulting from laser radiation were produced and analyzed. The accuracy of the developed model was qualitatively verified by comparing temperature and mechanical variations following the variations of laser parameters with relevant studies. The results of Box-Behnken analysis showed that beam size (S) had no significant impact on the response variables, with p-values exceeding 0.05. Temperature (T_max) demonstrates sensitivity to both beam intensity (I) and exposure time (T), jointly contributing to 89.6% of the observed variation. Conversely, while beam size (S) has no significant effect on stress value (Smax), wavelength (W), beam intensity (I), and exposure time (T) collectively account for 71.6% of the observed variation in Smax. It is recommended to use this model to obtain the optimal values of the laser treatment corresponding to tissue with specified dimensions and properties. Full article