Search Results (66)

This study analyzes the lacustrine hydrocarbon source rocks of the Lower Cretaceous in the Erdengsumu sag of the Erlian Basin, evaluating their characteristics and identifying areas with oil resource potential, while also investigating the ancient lake environment, material source input, and controlling factors, ultimately developing a sedimentary model for lacustrine hydrocarbon source rocks. The findings suggest the following: (1) The lower Tengger Member (K₁bt₁) and the Aershan Formation (K₁ba) are the primary oil-producing strata, with an effective hydrocarbon source rock exhibiting a lower limit of total organic carbon (TOC) at 0.95%. The Ro value typically remains below 0.8%, indicating that high-maturity oil production has not yet been attained. (2) The oil generation threshold depths for the Dalestai and Sayinhutuge sub-sags are 1500 m and 1214 m, respectively. The thickness of the effective hydrocarbon source rock surpasses 200 m, covering areas of 42.48 km² and 88.71 km², respectively. The cumulative hydrocarbon generation intensity of wells Y1 and Y2 is 486 × 10⁴ t/km² and 26 × 10⁴ t/km², respectively, suggesting that the Dalestai sub-sag possesses considerable petroleum potential. The Aershan Formation in the Chagantala sub-sag has a maximum burial depth of merely 1800 m, insufficient to attain the oil generation threshold depth. (3) The research area’s productive hydrocarbon source rocks consist of organic matter types I and II₁. The Pr/Ph range is extensive (0.33–2.07), signifying a reducing to slightly oxidizing sedimentary environment. This aligns with the attributes of small fault lake basins, characterized by shallow water and robust hydrodynamics. (4) The low ratio of ∑nC₂₁₋/∑nC₂₂₊ (0.36–0.81), high CPI values (>1.49), and high C₂₉ sterane concentration suggest a substantial terrestrial contribution, with negligible input from aquatic algae–bacterial organic matter. Moreover, as sedimentation duration extends, the contribution from higher plants progressively increases. (5) The ratio of the width of the deep depression zone to the width of the depression in the Erdengsumu sag is less than 0.25. The boundary fault scale is small, its activity is low, and there is not much input from the ground. Most of the source rocks are in the reducing sedimentary environment of the near-lying gently sloping zone. Full article

Groundwater at petroleum-contaminated sites typically exhibits elevated dissolved inorganic carbon (DIC) levels due to hydrocarbon biodegradation; however, our prior field investigations revealed an enigmatic DIC depletion anomaly that starkly contradicts this global pattern and points to an unrecognized carbon sink. In a breakthrough demonstration, this study provides the first experimental confirmation that sulfur-oxidizing bacteria (SOB) drive substantial carbon sequestration via a coupled sulfur oxidation autotrophic assimilation process. Through integrated hydrochemical monitoring and 16S rRNA sequencing in an enrichment culture system, we captured the complete DIC transformation trajectory: heterotrophic acetate degradation initially increased DIC to 370 mg/L, but subsequent autotrophic assimilation by SOB dramatically reduced DIC to 270 mg/L, yielding a net consumption of 85 mg/L. The distinctive pH dynamics (initial alkalization followed by acidification) further corroborated microbial regulation of carbon cycling. Critically, Pseudomonas stutzeri and P. alcaliphila were identified as the dominant carbon-fixing agents. These findings definitively establish that chemolithoautotrophic SOB convert DIC into organic carbon through a “sulfur oxidation-carbon fixation” coupling mechanism, overturning the conventional paradigm of petroleum-contaminated sites as perpetual carbon sources. The study fundamentally redefines natural attenuation frameworks by introducing microbial carbon sink potential as an essential assessment metric for environmental sustainability. Full article

The disposal of wastewater resulting from petroleum industries presents a major environmental challenge due to the presence of hard-to-degrade organic pollutants, such as oils and hydrocarbons, and high chemical oxygen demand (COD). In this study, an efficient and eco-friendly method was developed to treat such wastewater using a photocatalyst composed of biochar derived from pistachio shells and loaded with zinc oxide (ZnO) nanoparticles. The biochar-ZnO composite was prepared via a co-precipitation-assisted pyrolysis method to evaluate its efficiency in the photocatalytic degradation of petroleum wastewater (PW). The synthesized material was characterized using various techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared (FTIR) spectroscopy, to determine surface morphology, crystal structure, and functional groups present on the catalyst surface. Photocatalytic degradation experiments were conducted under UV and sunlight for 90 h of irradiation to evaluate the performance of the proposed system in removing oil and reducing COD levels. Key operational parameters, such as pH (2–10), catalyst dosage (0–0.1) g/50 mL, and oil and COD concentrations (50–500) ppm and (125–1252) ppm, were optimized by response surface methodology (RSM) to obtain the maximum oil and COD removal efficiency. The oil and COD were removed from PW (90.20% and 88.80%) at 0.1 g/50 mL of PS/ZnO, a pH of 2, and 50 ppm oil concentration (125 ppm of COD concentration) under UV light. The results show that pollutant removal is slightly better when using sunlight (80.00% oil removal, 78.28% COD removal) than when using four lamps of UV light (77.50% oil removal, 75.52% COD removal) at 0.055 g/50 mL of PS/ZnO, a pH of 6.8, and 100 ppm of oil concentration (290 ppm of COD concentration). The degradation rates of the PS/ZnO supported a pseudo-first-order kinetic model with R² values of 0.9960 and 0.9922 for oil and COD. This work indicates the potential use of agricultural waste, such as pistachio shells, as a sustainable source for producing effective catalysts for industrial wastewater treatment, opening broad prospects in the field of green and nanotechnology-based environmental solutions in the development of eco-friendly and effective wastewater treatment technologies under solar light. Full article

Most large-scale crude oil spills occur in marine environments. We screened easily propagable/maintainable halophiles to develop agents for the bioremediation of marine spills. A bacterial strain isolated from a polluted region of the Great Salt Lake was characterized and tested for its ability to degrade crude oil. The strain (Salinivibrio costicola) is motile, catalase- and lipase-positive, a facultative anaerobe, and an obligate halophile. Its growth optimum and tolerance ranges are: NaCl (5%, 1.25–10%), pH (8, 6–10), and temperature (22 °C, 4–45 °C). Its genome (3,166,267 bp) consists of two circular chromosomes and a plasmid, containing 3197 genes, including some genes potentially relevant to hydrocarbon metabolism. The strain forms a biofilm but is considered nonpathogenic and is sensitive to some common antibiotics. Lytic bacteriophages infecting the strain are rare in the water samples we tested. The strain survived on desiccated agar media at room temperature for a year, grew optimally in complex media containing 0.1–1% crude oil, but failed to reduce total recoverable petroleum hydrocarbons from crude oil. Thus, a recalcitrant halophile may endure crude oil without mineralizing. Due to some of their advantageous attributes, such strains can be considered for genetic manipulation to develop improved agents for bioremediation. Full article

Groundwater sustains ecosystems, agriculture, and human consumption; therefore, its interaction with hydrocarbons is an important area of research under the umbrella of environmental science and resource exploration. Naturally occurring or anthropogenically introduced hydrocarbons can significantly impact groundwater through complex geochemical processes such as dissolution, adsorption, biodegradation, and redox reactions and can also affect groundwater chemistry in terms of pH, redox potential, dissolved organic carbon, and trace element concentrations. Accurate determination and identification of hydrocarbon contaminants requires advanced analytical methods like gas chromatography, GC–MS, and fluorescence spectroscopy, complemented with isotopic analysis and microbial tracers, which provide insights into sources of contamination and biodegradation pathways. The presence of hydrocarbons in groundwater is a matter of environmental concern but can also valuable data for petroleum exploration, tracing subsurface reservoirs and seepage pathways. This paper refers to the basic need for geochemical investigations combined with advanced detection techniques for successful regulation of thermal–mineral groundwater quality. This contributes towards successful sustainable hydrocarbon resource exploration and water resource conservation, with emphasis on the relationship between groundwater quality and hydrocarbon exploration. The study points out the significance of continuous observation of thermal mineral waters to identify their connection with the specific hydrocarbons of each study area. Full article

The influence of petroleum hydrocarbons (PHCs) on the transport and transformation of heavy metals may limit bioremediation efficiency. The mechanisms by which PHC degradation intermediates control heavy metal distribution in calcareous soils from karst areas require further exploration. This study systematically investigated how compositional changes in diesel fuel during aging regulated the fate of Cd and Pb in calcareous soils. The results demonstrated that the low-molecular-weight fractions of diesel fuel (C₁₀−C₁₆) were preferentially degraded. This degradation process altered zeta potential, cation exchange capacity (CEC), and pH, thereby promoting Cd stabilization through electrostatic attraction and speciation transformation. Particularly, reducible Cd content showed a strong positive correlation with C₁₆ content (r = 0.88, p < 0.05). Furthermore, the degradation of C₁₀−C₁₆ fractions caused Pb transformation from residual to bioavailable fractions by stimulating microbial activity. Residual Pb content was positively correlated with C₁₀−C₁₆ fractions (r = 0.55, p < 0.05). Notably, dissolved organic matter (DOM) and CaCO₃ content in calcareous soils enhanced Cd and Pb adsorption, thereby weakening the interactions between these metals and C₁₀−C₁₆ fractions. Consequently, multiple linear regression (MLR) models relying exclusively on C₁₀−C₁₆ degradation parameters showed poor fitting coefficients for Cd/Pb mobility. The present work provides scientific guidance for heavy metal bioremediation in calcareous soils. Full article

The lower and middle Carboniferous shale sequences are one of the important potential hydrocarbon source rocks in the piedmont of the southwestern Tarim Basin, China (PSTB). Rock samples were collected from the lower and middle Carboniferous formations on the Kushanhe, Altash, and Aitegou outcrops in the PSTB with the intention of mapping the hydrocarbon molecules within these shale sources and disclosing the relevant geochemical implications. The ratios of Pr/Ph < 1.0 and DBT/P < 0.4 and the enrichment of C₂₃ tricyclic terpanoid indicate that the Carboniferous shale sources were deposited in a reducing and sulfate-poor marine setting with the contribution of terrestrial freshwater. Marine aquatic algae act as the major contributor, resulting in the formation of Type II₁ kerogen. The Carboniferous shale sequences contain abundant diamondoids with 2–4 cages with the predominance of methyldiamantanes, dimethyldiamantanes, and methyltriamantanes. Quantitative extended diamondoid analysis indicates the occurrence of carbonate-rich and carbonate-poor organic facies in the PSTB. Compared to the carbonate-poor facies, the carbonate-rich facies is relatively depleted in C₂₇ diasteranes and rich in gammacerane, C₂₇ regular steranes, and alkylated triamantanes. This indicates that it was deposited in the more salty and stratified water column but with less input of land higher plants. The clay catalysis effects are assumed to be responsible for the discrepancy in steranes and diamondoids. The Carboniferous shale sequences also contain abundant polycyclic aromatic hydrocarbons with 2–5 rings with the predominance of C_0–1-phenanthrenes, chrysenes, and benzofluoranthenes. Thermal maturity parameters associated with polycyclic aromatic hydrocarbons and diamondoids suggest that the Carboniferous shale sources have arrived at the late mature to highly mature stage. This study provides the detailed molecular fingerprints of the lower and middle Carboniferous shale source sequences and explores the underlying geochemical implications. This should be helpful for oil–oil and oil–source correlations and hence petroleum exploration activity in the PSTB. Full article

The present study aimed to comprehensively dissect the petroleum hydrocarbon degradation mechanism of Acinetobacter vivianii KJ-1. The isolated and identified strain was able to proliferate using diesel as the sole carbonaceous substrate. Via comparative genomics, an in-depth analysis was performed to elucidate the genome similarities and disparities between this strain and related strains, thereby uncovering a core genome as well as genes with uncharacterized functions. Transcriptome analysis, carried out under different substrate conditions (C16, diesel, sodium acetate) manifested distinct gene expression modalities. A multitude of genes associated with alkane metabolism were differentially expressed, among which alkB1_1 and alkB1_2 was conspicuously upregulated. Prokaryotic expression of alkB1_1 was implemented, and the enzyme activity of the recombinant protein peaked at a pH level of approximately 7.0 and within a temperature range of 30 to 40 °C. The recombinant strain was shown to possess the ability to degrade n-hexadecane. Collectively, this research not only augments the understanding of the degradation mechanism of A. vivianii KJ-1 but also provides a fundamental basis for developing bioremediation strategies targeting petroleum hydrocarbon-contaminated environments. Full article

With industrialization and widespread chemical use, soil organic pollutants have become a major environmental issue. Forest ecosystems, among the most important on Earth, have unique potential for controlling and remediating soil pollution. This article explores the mechanisms of microbial community degradation of organic pollutants, their adaptability across forest ecological conditions, and the effects of environmental factors on degradation efficiency. For example, acidic pH (pH < 5.5) favors PAH degradation, near-neutral pH (6.0–7.5) enhances pharmaceutical and PPCP degradation, and alkaline conditions (pH > 7.5) facilitate petroleum hydrocarbon, VOC, and PPCP breakdown. Optimal microbial degradation occurs with humidity levels between 60% and 80%, and SOM content of 2–5%. This review analyzes advancements in microbial degradation technologies for forest ecosystem soil pollution treatment, including genetic engineering, composting, bioaugmentation, and bio-stimulation techniques, and their integration with phytoremediation. The review also addresses the challenges of real-world implementation, such as maintaining microbial diversity, managing pollutant complexity, adapting to environmental changes, and highlighting future research opportunities. The next decade will focus on synthetic biology, omics technologies, microbial-electrochemical systems, community dynamics, eco-engineering, and plant-microbe synergy to develop efficient, sustainable bioremediation strategies. Full article

Soil contamination from oil spills in the canton of Francisco de Orellana in Ecuador is the biggest contamination problem in the region. It affects the quality of resources and poses health risks to the surrounding communities. To find an economical and efficient alternative for the remediation of soils contaminated with total petroleum hydrocarbons (TPHs), the application of oil palm bagasse was proposed. This is a locally available industrial waste. The methodology of the study was based on the application of six treatments (G-A, G-B, O-A, O-B, M-A, M-B) belonging to the bagasse of Elaeis guineensis and Elaeis oleifera, in two percentages of concentration, 98:2 and 96:4, during a period of 20 days. To determine the efficacy of the treatments, the bagasse of the two palms was characterized. In addition, the initial physicochemical characterization of the soil and the final characterization after the treatments were carried out. Soil characterization included analyses of macronutrients, micronutrients, metals, pH, EC and TPH. The results of the initial characterization revealed that the concentrations of electrical conductivity and TPH were more than 70 and 50 times the values established in the 97-A ministerial agreement, respectively. However, after the final characterization, the effectiveness of the treatments in reducing metal concentrations was observed. Likewise, conductivity levels were reduced by more than 10 times. As for TPH, the G-B treatment stood out by achieving a 56% removal of this pollutant. Full article

Soils co-contaminated with petroleum hydrocarbons (PHs) and heavy metals pose significant challenges, such as reduced bioavailability of pollutants, toxic effects on soil microorganisms, and unpredictable chemical interactions. These complex interactions hinder effective remediation. Phytoremediation, which utilizes plant and microbial processes, offers a sustainable and eco-friendly approach. However, its effectiveness is often constrained by the intricate interplay among PHs, heavy metals, and soil components, which complicates pollutant degradation and microbial activity. This review explores the interactions between enhancement strategies, including soil amendments, plant growth-promoting bacteria (PGPB), and genetic engineering, which can synergistically enhance pollutant degradation and remediation efficiency. Key challenges include competition for soil adsorption sites among contaminants, microbial community disruptions, and environmental variability. Moreover, the limitations of these strategies, including their reliance on specific plant species, sensitivity to environmental variability, and the necessity for long-term monitoring, are discussed. The proposed solutions focus on integrating emerging technologies and interdisciplinary approaches to overcome these challenges and improve pollutant removal efficiency. Future advancements in interdisciplinary approaches, integrating biological techniques with technological innovations, are highlighted as key to addressing the complexities of co-contaminated environments and improving pollutant removal efficiency. Full article

The thermal washing of oily sludge using sodium persulfate (SD) assisted by sodium lignosulfonate surfactant has been demonstrated to be an effective method for oily sludge remediation. To further explore the underlying mechanisms of this process, a systematic study was conducted by simulating oily sludge systems consisting of saturated hydrocarbons (SaH), aromatics hydrocarbons (ArH), resins (Res), and asphaltenes (Asp). The effects of reaction conditions, such as pH, sodium lignosulfonate alkyl (LSA) concentration, SD concentration, and washing temperature, were analyzed. Furthermore, the oxidative kinetic mechanism during the reaction process was investigated. The results demonstrated that neither petroleum hydrocarbons nor SD underwent significant chemical transformations when exposed to LSA, while SD exhibited a marked oxidative degradation effect on all four types of hydrocarbons. Oxidation kinetics indicated that sodium hydroxide played a catalytic role, with SD being the main oxidant and particularly efficient in degrading Asp and Res. Meanwhile, LSA contributed to the removal of hydrocarbons by reducing the surface tension of the solution, enhancing solubilization. This study not only elucidates the central role of SD in the thermal washing process but also provides a solid theoretical foundation for the practical application of this technology in oily sludge treatment. Full article

Bioremediation is a promising strategy to remove crude oil contaminants. However, limited studies explored the potential of bacterial consortia on crude oil biodegradation in high salinity soil. In this study, four halotolerant strains (Pseudoxanthomonas sp. S1-2, Bacillus sp. S2-A, Dietzia sp. CN-3, and Acinetobacter sp. HC8-3S), with strong environmental tolerance (temperature, pH, and salinity), distinctive crude oil degradation, and beneficial biosurfactant production, were combined to construct a bacterial consortium. The inoculation of the consortium successfully degraded 97.1% of total petroleum hydrocarbons in 10 days, with notable removal of alkanes, cycloalkanes, branched alkanes, and aromatic hydrocarbons. Functional optimization showed that this consortium degraded crude oil effectively in a broad range of temperature (20–37 °C), pH (6–9), and salinity (0–100 g/L). In salt-enriched crude-oil-contaminated soil microcosms, the simultaneous treatment of bioaugmentation and biostimulation achieved the highest crude oil degradation rate of 568.6 mg/kg/d, compared to treatments involving abiotic factors, natural attenuation, biostimulation, and bioaugmentation after 60 days. Real-time PCR targeting the 16S rRNA and alkB genes showed the good adaptability and stability of this consortium. The degradation property of the constructed bacterial consortium and the engineered consortium strategy may have potential use in the bioremediation of crude oil pollution in high-salinity soil. Full article

The efficient and green remediation of petroleum hydrocarbon (PH) contamination has emerged as a viable strategy for environmental management. Here, we investigated the interaction between arsenic and PH degradation by Rhodococcus sp. 2021 under their combined pollution. The strain exhibited disparate responses to varying concentrations and valences of arsenic. The elevated concentration of arsenic (>100 mg/L) facilitated the degradation of PHs, and there was a positive correlation between arsenic-promoted degradation of PHs and their carbon-chain length. The degradation of PHs changed with arsenic conditions as follows: trivalent arsenic groups > pentavalent arsenic groups > arsenic-free groups (control). Arsenite and arsenate significantly promoted the gene expression of arsenic metabolism and alkane degrading. But unlike arsenite, arsenate also significantly promoted the gene expression of phosphate metabolism. And arsenite promoted the up-regulation of the expression of genes involved in the process of PHs oxidation and fatty acid oxidation. These results highlight the potential of Rhodococcus sp. 2021 in the remediation of combined total petroleum hydrocarbon (TPH) and heavy metal pollution, providing new insights into the green and sustainable bioremediation of combined pollution of organic matters such as PHs and heavy metals/heavy metal-like elements such as arsenic. Full article

Water contamination resulting from coal spills is one of the largest environmental problems affecting communities in the Appalachia Region of the United States. This coal slurry contains potentially toxic substances, such as hydrocarbons, heavy metals, and coal cleaning chemicals, and its leakage into water bodies (lakes, rivers, and aquifers) can lead to adverse health effects not only for freshwater bodies and plant life but also for humans. This study focused on two major experiments. The first experiment involved the use of biochar to create a biochar–polysulfone (BC-PSf) flat-sheet multifunctional membrane to remove organic contaminants, and the other major experiment compared eco-friendly (gamma-valerolactone—GVL; Rhodiasolv^® PolarClean—PC) and petroleum-derived solvents (i.e., N-methyl-pyrrolidone—NMP) in the fabrication of the biochar–polysulfone membranes. The resulting membranes were tested for their efficiency in removing both positively and negatively charged organic contaminants from the collected water at varying pH values. A comparative life cycle assessment (LCA) with accompanying uncertainty and sensitivity analyses was carried out to understand the global environmental impacts of incorporating biochar, NMP, GVL, and PC in the synthesis of PSf/NMP, BC-PSf/NMP, PSf/GVL, BC-PSf/GVL, PSf/PC, and BC-PSf/PC membranes at a set surface area of 1000 m². The results showed that the addition of biochar to the membrane matrix increased the surface area of the membranes and improved both their adsorptive and mechanical properties. The membranes with biochar incorporated in their matrix showed a higher potential for contaminant removal than those without biochar. The environmental impacts normalized to the BC-PSf/GVL membrane showed that the addition of biochar increased global warming impacts, eutrophication, and respiratory impacts by over 100% in all the membrane configurations with biochar. The environmental impacts were highly sensitive to biochar addition (Spearman’s coefficient > 0.8). The BC/PSf membrane with Rhodiasolv^® PolarClean had the lowest associated global environmental impacts among all the membranes with biochar. Ultimately, this study highlighted potential tradeoffs between functional performance and global environmental impacts regarding choices for membrane fabrication. Full article