Search Results (113)

The Tianfu Gas Field in the Sichuan Basin is a core block for the large-scale, economic development of Jurassic tight gas in China. The first sub-member of the first member of the Shaximiao Formation in the Zhongjiang Block hosts typical low-porosity and low-permeability tight sandstone reservoirs. Based on detailed field geological surveys and core observations, this study employed multiple technical methods, including cast thin sections, scanning electron microscopy, computed tomography (CT) scanning, and nuclear magnetic resonance (NMR) to investigate sedimentary microfacies’ characteristics, analyze key reservoir properties (e.g., reservoir space types and pore structure), and clarify the main controlling factors of reservoir development. The results indicate the following: (1) The sedimentary period of the first sub-member of the first member of the Shaximiao formation (Es₁¹) was controlled by a subtropical humid climate, with widespread gray mudstones and bedding-parallel plant fossil fragments. The main sedimentary environment was a shallow-water delta front, where the underwater distributary channel microfacies was the dominant facies belt. (2) Reservoir lithology is dominated by lithic arkose and feldspathic litharenite, with low compositional and structural maturity. Residual primary intergranular pores are the dominant reservoir space type, followed by intragranular dissolved pores in feldspar and lithic fragments. (3) The pore structure is characterized by a small pore-throat radius, poor sorting, and strong heterogeneity. Reservoirs can be subdivided into three categories, with Types II and III being the main types developed in this block. (4) Underwater distributary channels of the shallow-water delta are the main occurrence of reservoir sand bodies. During the burial diagenetic stage, calcite and laumontite cementation and filling led to reservoir densification. Meanwhile, early-formed chlorite rim cement effectively protected primary pores by inhibiting grain compaction and quartz overgrowth. Superimposed with the dissolution and alteration of feldspar, lithic fragments, and other components by late acidic fluids, effective pores were further expanded. The synergistic coupling of these sand-controlling factors and the “densification–protection–alteration” diagenetic process jointly constitutes the formation mechanism of high-quality reservoirs. This mechanism can provide a reliable theoretical basis for the accurate prediction of reservoir “sweet spots” and the optimal selection of horizontal well targets in the Zhongjiang Block of the Tianfu Gas Field. Full article

Droplet microfluidics enables precise manipulation of picoliter-to-nanoliter-scale droplets and supports key operations such as merging, splitting, sorting, and trapping, facilitating controlled handling of minute fluid volumes. These capabilities have significantly advanced high-throughput drug discovery, single-cell analysis, molecular diagnostics, and synthetic biology. Among these operations, droplet splitting is particularly important for multi-step biochemical assays and parallel processing. Splitting strategies can be broadly categorized as passive, relying on channel geometry or microstructures, or active, employing external stimuli such as thermal, magnetic, acoustic, or electric fields. Electric-field-based methods are especially attractive due to their rapid response and tunability; however, many reported systems require relatively high operating voltages. Here, we present a low-voltage microfluidic platform that integrates tilted interdigitated electrodes (IDEs) with an asymmetric Y-junction to enable electrically tunable droplet splitting and sorting within a single device architecture. Two independently addressable tilted IDE arrays generate localized electric-field gradients that induce dielectrophoretic droplet deflection at moderate voltages. By adjusting the applied voltage amplitude and selectively activating the electrode arrays, droplets can be dynamically routed into designated outlets or deterministically split in real time, providing adaptable electrohydrodynamic control with minimal structural complexity. Full article

Structural optimization of the cathode flow field is a viable approach to homogenize multi-physical field distributions and boost the output of air-cooled proton exchange membrane fuel cells (PEMFCs). This work develops a three-dimensional non-isothermal model to systematically evaluate the performance of graded flow channel designs. The results indicate that the graded structure promotes fluid transport in the central zone, thereby improving oxygen distribution uniformity at the gas diffusion layer/catalyst layer (GDL/CL) interface. Compared to the traditional parallel flow channel (with an average oxygen mass fraction of 0.051% and a uniformity index of 0.779), this configuration yields a 6.4% increase in the average oxygen mass fraction and a 0.96% enhancement in distribution uniformity. However, increased gradient flow reduces the flow velocity within the channels and raises the operating temperature, posing challenges for water and thermal management. The curved channel design, featuring longer channels at the ends and shorter channels in the center, compensates for the uneven air supply caused by the fan, thus balancing the flow distribution. Among the tested configurations, the 10° curved structure exhibits optimal performance, achieving the best compromise between gas distribution and liquid water removal. It effectively promotes oxygen diffusion and uniform water distribution, significantly alleviating mass transfer polarization and yielding a more uniform interface temperature distribution due to evaporative cooling. Both excessively small and large curvature angles lead to performance degradation, primarily due to inadequate water removal and flow separation, accompanied by excessive pressure drop, respectively. In contrast, the 10° curved channel strikes an optimal balance, offering significant advantages in overall cell performance and water–thermal management, which provides critical guidance for optimizing PEMFC flow field designs. Full article

3D printing offers great potential for rapid and cost-effective fabrication of microfluidic lab-on-a-chip systems. Through a comparative approach, we implemented staggered herringbone mixer (SHM), Tesla mixer, and split and recombine mixer (SAR), along with a basic unperturbed channel into one chip and performed comparative mixing efficiency experiments. We also introduced a phaseguide-based, T-shaped stop structure at the Y-shaped inlets for bubble-free and parallel filling. The structures were analyzed with two poorly mixable dye solutions at flow rates ranging from 1 µL/min to 200 µL/min. The mixing efficiency was evaluated using optical gray value analysis and compared against diffusion-based mixing. The fluid-aligning phaseguides in the 3D-printed system were shown to work. Among the three different mixing structures tested, SHM exhibited the best mixing efficiency at all tested flow rates. Uniformly designed SHM structures contain a region of poor mixing between the two zones of turbulence. In a non-uniform design, fluid breakers were placed between two SHM units to redirect poorly mixed fluids to the edges, resulting in 100% mixing efficiency across all measured flow rates. These results, especially SHM with fluid breakers, support the development of cost-effective injection-molded lab-on-a-chip systems with improved mixing functionalities at close range instead of simple long-length meandric systems. Full article

Establishing accurate hydrodynamic models for underwater vehicles requires extensive motion and force data. However, acquiring such data through full-scale sea trials involves complex platforms, sensors, and control technologies, presenting significant constraints and substantial costs. Therefore, identifying reliable alternative approaches, such as Computational Fluid Dynamics (CFD) simulations, is essential for efficiently obtaining the requisite modeling data. This study employs CFD techniques to conduct simulations, specifically utilizing the overset mesh method to address the multi-degree-of-freedom motion of the vehicle. Concurrently, Circulating Water Channel (CWC) experiments were performed to obtain comparative data. The simulation results demonstrate strong agreement with the experimental measurements, validating the accuracy and reliability of CFD simulations in predicting the hydrodynamic characteristics of underwater vehicles. The findings indicate that the adopted CFD simulation methodology can provide a credible data foundation for hydrodynamic modeling of underwater vehicles, effectively overcoming the numerous limitations associated with sea trials. Full article

With the rapid advancement in millimeter-wave antennas, heat dissipation of array heat sources faces significant challenges due to increasing requirements on power density and miniaturization. Efficient thermal management is essential to ensure reliability and performance, particularly in high-power applications such as millimeter-wave antennas. This study investigates liquid-cooled heat sinks featuring an inlet and outlet on the same side. A topology optimization method is employed to design an efficient heat sink, minimizing both average temperature and fluid dissipation. The optimized design is compared with common liquid-cooled heat sinks, including series, parallel, pin rib, and tree channels, through experimental and numerical simulations. A dedicated liquid-cooled experimental platform is developed to evaluate thermal and fluid characteristics under different flow rates. The results demonstrate that the topology optimization channels achieve superior thermal uniformity and lower pressure drop compared to traditional designs. The average temperatures of the heat sources in topology optimization I and II channels are 6% and 4% lower than those in the other flow channels, respectively, and the topology optimization I channel exhibits the most favorable fluid characteristics, with a pressure drop 9% lower than that of the parallel flow channel. Specifically, the topology optimization I and II channels exhibit balanced heat dissipation and flow resistance, while the series channel suffers from excessive pressure losses. The findings provide valuable insights for optimization, offering a practical method for enhancing thermal management in millimeter-wave antenna applications. Full article

Carbon dioxide (CO₂) has been widely applied in gas flooding for reservoir development due to its remarkable oil recovery potential. However, because its viscosity is lower than that of water and most crude oils, severe channeling often occurs during the flooding process, resulting in a significant reduction in the sweep efficiency. To address this issue, foam flooding has attracted considerable attention as an effective method for controlling CO₂ mobility. In this study, a compound foam system was developed with alpha-olefin sulfonate (AOS) as the primary foaming agent, alcohol ethoxylate (AEO) and cetyltrimethylammonium bromide (CTAB) as co-surfactants, and partially hydrolyzed polyacrylamide (HPAM) as the stabilizer. The optimal system was screened through evaluations of comprehensive foam index, salt tolerance, oil resistance, and shear resistance. Results indicate that the AOS+AEO formulation exhibits superior foaming ability, salt tolerance, and foam stability compared with the AOS+CTAB system, with the best performance achieved at a mass ratio of 2:1 (AOS:AEO), balancing both adaptability and economic feasibility. A heterogeneous reservoir model was constructed using parallel core flooding to investigate the displacement performance and blocking capability of the system. Nuclear magnetic resonance (NMR) imaging was employed to monitor in situ oil phase migration and clarify the recovery mechanisms. Experimental results show that the compound foam system demonstrates excellent conformance control performance, achieving a blocking efficiency of 84.5% and improving the overall oil recovery by 4.6%. NMR imaging further reveals that the system effectively mobilizes low-permeability zones, with T₂ spectrum analysis indicating a 4.5% incremental recovery in low-permeability layers. Moreover, in reservoirs with larger permeability ratio, the system exhibits enhanced blocking efficiency (up to 86.5%), though the incremental recovery is not strictly proportional to the blocking effect. Compared with previous AOS-based CO₂ foam studies that primarily relied on pressure drop and effluent analyses, this work introduces NMR imaging and T₂ spectrum diagnostics to directly visualize pore-scale fluid redistribution and quantify sweep efficiency within heterogeneous cores. The NMR data provide mechanistic evidence that the enhanced recovery originates from selective foam propagation and the mobilization of residual oil in low-permeability channels, rather than merely from increased flow resistance. This integration of advanced pore-scale imaging with macroscopic displacement analysis represents a mechanistic advancement over conventional CO₂ foam evaluations, offering new insights into the conformance control behavior of AOS-based foam systems in heterogeneous reservoirs. Full article

Droplet-based microfluidics has rapidly advanced applications in chemistry, biology, materials science, medicine, food science, and cosmetics. Using this technology, various oils have been employed for fluid encapsulation. This study is the first to investigate the use of an animal-based unsaturated fatty acid oil—emu oil—for microdroplet formation. We characterized droplet generation in the presence and absence of a non-fluorinated surfactant at a defined concentration and examined the influence of geometrical parameters using T-junction microchannels with two different central channel widths. The results were compared with those obtained from a plant-based oil (olive oil) under parallel experimental conditions. Given the growing concerns regarding the environmental and health risks of fluorocarbon oils combined with fluorinated surfactants, which are widely used in microfluidics, emu oil represents a potentially safer alternative for microdroplet-based technologies across multiple fields. Full article

This article investigates a mathematical model with the Caputo derivative for the transient unidirectional flow of an incompressible viscous fluid with pressure-dependent viscosity. The fluid flows in the spatial domain bounded by two parallel plates extended to infinity. The plates translate in their planes with time-dependent velocities, and the fluid adheres to the solid boundaries. The generalization of the model consists of formulating a fractional constitutive equation to introduce the memory effect into the mathematical model. In addition, the fluid’s viscosity is assumed to be pressure-dependent. More precisely, in this article, the viscosity is considered a power function of the vertical coordinate of the channel. Analytic solutions of the dimensionless initial and boundary value problems have been determined using the Laplace transform and Bessel equations. The inversion of Laplace transforms is conducted using both the methods of complex analysis and the Stehfest numerical algorithm. In addition, we discuss the explicit solution in some meaningful particular cases. Using numerical simulations and graphical representations, the results of the ordinary model $(\alpha =1)$ are compared with those of the fractional model $(0<\alpha <1)$, highlighting the influence of the memory parameter on fluid behavior. Full article

The main objective of this study was to investigate boiling heat transfer during refrigerant flow in a mini-channel heat sink. The test section consisted of multiple parallel mini-channels, each with a depth of 1 mm. The working fluid was heated by a thin layer of Haynes-230 alloy with a thickness of 0.1 mm. The outer surface temperature of the heater was measured using infrared thermography, while other thermal and flow-based parameters were recorded via a dedicated data acquisition system. The mini-channel heat sink was tested in seven different spatial orientations, with inclination angles relative to the horizontal plane of 45°, 60°, 75°, 90°, 105°, 120°, and 135°. The analysis focused on the early stage of the experiment, corresponding to the forced convection, boiling incipience, and subcooled boiling region. A time-dependent, two-dimensional model of heat transfer during flow boiling of a refrigerant in asymmetrically heated mini-channels was developed. The temperatures of both the heating foil and the working fluid (Fluorinert FC-770) were described using appropriate forms of the Fourier–Kirchhoff equation, subject to relevant boundary conditions. Two sets of time-dependent Trefftz functions were employed to solve the governing equations: one set corresponding to the two-dimensional Fourier equation and another, newly derived, for the energy equation in the fluid. The results include thermographic images of the heated surface, temperature distributions, fluid temperatures, local heat-transfer coefficients, and boiling curves. A comparison of the heat-transfer coefficients obtained using the Trefftz-based approach and those calculated using Fourier’s law demonstrated satisfactory agreement. Full article

Implementing energy-efficient solutions and developing energy complexes to decentralise power supply are key objectives for enhancing national security in Ukraine and Eastern Europe. This study compares the design, numerical, and experimental parameters of a channel-type jet-reaction turbine. A steam turbogenerator unit and a pilot industrial experimental test bench were developed to conduct full-scale testing of the unit. The article presents experimental data on the operation of a steam turbogenerator unit with a capacity of up to 475 kW, based on a channel-type steam jet-reaction turbine (JRT), and includes the validation of a computational fluid dynamics (CFD) model against the obtained results. For testing, a pilot-scale experimental facility and a turbogenerator were developed. The turbogenerator consists of two parallel-mounted JRTs operating on a single electric generator. During experimental testing, the system achieved an electrical output power of 404 kW at a turbine rotor speed of 25,000 rpm. Numerical modelling of the steam flow in the flow path of the jet-reaction turbine was performed using ANSYS CFX 25 R1 software. The geometry and mesh setup were described, boundary conditions were defined, and computational calculations were performed. The experimental results were compared with those obtained from numerical simulations. In particular, the discrepancy in the determination of the power and torque on the shaft of the jet-reaction turbine between the numerical and full-scale experimental results was 1.6%, and the discrepancy in determining the mass flow rate of steam at the turbine inlet was 1.34%. JRTs show strong potential for the development of energy-efficient, low-power turbogenerators. The research results confirm the feasibility of using such units for decentralised energy supply and recovering secondary energy resources. This contributes to improved energy security, reduces environmental impact, and supports sustainable development goals. Full article

This study focuses on the phenomenon of boiling heat transfer during fluid flow (Fluorinert FC-72) in minichannels. The research stand was built around a specially designed test section incorporating sets of aligned minichannels, each 1 mm deep. These channel arrays varied in number, comprising configurations with 7, 15, 17, 19, 21, and 25 parallel channels. The test section was vertically orientated with upward fluid flow. To address the heat transfer problem associated with transient flow boiling, two numerical approaches grounded in the finite element method (FEM) were employed. One used the Trefftz function formulation, while the other relied on simulations performed using the commercial software ADINA (version 9.2). In both approaches, the heat transfer coefficient at the interface between the heated foil and the working fluid was determined by applying a Robin-type boundary condition, which required knowledge of the temperatures in both the foil and the fluid, along with the temperature gradient within the foil. The outcomes of both FEM-based models, as well as those of a simplified 1D method based on Newton’s cooling law, yielded satisfactory results. Full article

In the present study, three-dimensional turbulent, subcritical open-channel flow (Fr = 0.19) through submerged rigid vegetation is numerically investigated using the ANSYS FLUENT solver (v. 22. 1). The Volume of Fluid (VOF) method is applied for free-surface tracking, while the standard k-ε turbulence model is employed for turbulence closure. Vegetation is modeled as vertical rigid cylinders fixed at the bottom of the channel. Regarding the arrangement of the stems, two cases are examined. In the first case, a linear arrangement of three equally spaced vegetative stems is located transversely at the center of the channel, while in the second case, a parallel arrangement of fifteen equidistant vegetative stems is located downstream of the channel center. In both cases, the vertical velocity profile within the submerged vegetation layer deviates significantly from that of the upper non-vegetated layer, which generally adheres to the logarithmic velocity distribution. In the second case, flow field repeatability is observed after the third stem series, particularly in terms of velocity profiles. Additionally, the structure of turbulence is noticeably affected in the vicinity of the stems, resulting in higher eddy viscosity values near each stem’s crest area. Furthermore, a localized drop in the free surface is recorded above the vegetated region, while a slight rise is observed upstream of each stem series, consistent with subcritical open-channel flow. Full article

The parallel multi-branch pipeline system is usually used for fluid transportation and distribution in the cooling of high-power electronic equipment, especially in radar equipment. Using CFD software, a simulation study was conducted to analyze the fluid flow distribution and heat transfer characteristics within a 6 × 5 parallel multi-branch pipe. This study examined how the dimensions of the fluid channels in the liquid cooling system affected the uniformity of flow distribution and the cooling effectiveness of the system for electronic equipment. The deviation from the design flow rate was used as an evaluation criterion to assess flow distribution uniformity across the branches and components of the multi-branch liquid cooling system. After ensuring uniform flow distribution, the overall heat transfer characteristics of the liquid cooling system were analyzed. The main findings are as follows: by adjusting the flow channel dimensions within the system, the overall flow distribution uniformity increased by 10%, with the deviation from the design flow rate in each T/R component remaining within 20%. The 6 × 5 parallel multi-branch cold plate efficiently cools T/R components with heat flux densities of up to 500 W/cm², maintaining the maximum component temperature below 358 K. Full article

The flow channel structure in alkaline electrolyzers critically impacts electrolyte distribution uniformity, influencing stagnant zones, gas bubble accumulation, and electrode reactions. Conventional concave–convex bipolar plates cause uneven flow and reduced current density. Therefore, a scaled-down-sized multiple inlet setup coupled with the bipolar plate channel of three typical concave–convex structures was designed to improve the uniformity of electrolyte. Three-dimensional computational fluid dynamics was employed to analyze the flow characteristics in the channels. The results indicated that in the single inlet/outlet model, the velocity near the center axis along the mainstream direction was higher than at the edge of the channels, resulting in a non-uniform flow distribution. The vorticity intensity gradually decreased along the flow direction, while the multiple inlet/outlet structure strengthened the intensity. The multiple inlet model allowed for the electrolyte flow across more areas along the channel and enhanced the velocity uniformity. According to the velocity uniformity evaluation criteria, the flow uniformity index of the three-inlet square concave–convex structure was the highest, reaching 0.80 at the middle cross-section normal to the incoming flow and 0.88 parallel to the flow. This study may help provide a useful guide for the design and optimization of efficient electrolyzer in alkaline water electrolysis. Full article