Search Results (288)

Ruminant livestock production plays a crucial role in the agricultural systems of Sub-Saharan Africa, significantly supporting rural livelihoods through income generation, improved nutrition, and employment opportunities. Despite its importance, the sector continues to face substantial challenges, such as low feed quality, seasonal feed shortages, and climate-related stresses, all of which limit productivity and sustainability. Considering these challenges, the adoption of natural feed additives has emerged as a promising strategy to enhance animal performance, optimise nutrient utilisation, and mitigate environmental impacts, including the reduction of enteric methane emissions. This review underscores the significant potential of natural feed additives such as plant extracts, essential oils, probiotics, and mineral-based supplements such as fossil shell flour as sustainable alternatives to conventional growth promoters in ruminant production systems across the region. All available documented evidence on the topic from 2000 to 2024 was collated and synthesised through standardised methods of systematic review protocol—PRISMA. Out of 319 research papers downloaded, six were included and analysed directly or indirectly in this study. The results show that the addition of feed additives to ruminant diets in all the studies reviewed significantly (p < 0.05) improved growth parameters such as average daily growth (ADG), feed intake, and feed conversion ratio (FCR) compared to the control group. However, no significant (p > 0.05) effect was found on cold carcass weight (CCW), meat percentage, fat percentage, bone percentage, or intramuscular fat (IMF%) compared to the control. The available evidence indicates that these additives can provide tangible benefits, including improved growth performance, better feed efficiency, enhanced immune responses, and superior meat quality, while also supporting environmental sustainability by reducing nitrogen excretion and decreasing dependence on antimicrobial agents. Full article

Low-commercial-value natural pistachios (broken, closed, or immature) can be revalorised through oil extraction, obtaining a high-quality oil and partially defatted flour as by-product. This study evaluated the techno-functional and nutritional properties of the flours obtained by hydraulic press (HP) and single-screw press (SSP) systems, combined with pretreatment at 25 °C and 60 °C. The extraction method significantly influenced flour’s characteristics, underscoring the need to tailor processing conditions to the specific technological requirements of each food application. HP-derived flours presented lighter colour, greater tocopherol content, and higher water absorption capacity (up to 2.75 g/g), suggesting preservation of hydrophilic proteins. SSP-derived flours showed higher concentration of protein (44 g/100 g), fibre (12 g/100 g), and minerals, and improved emulsifying properties, enhancing their suitability for emulsified products. Pretreatment at 25 °C enhanced functional properties such as swelling power (~7.0 g/g) and water absorption index (~5.7 g/g). The SSP system achieved the highest oil extraction yield, with no significant effect of pretreatment temperature. The oils extracted showed high levels of unsaturated fatty acids, particularly oleic acid (~48% of ω-9), highlighting their nutritional and industrial value. The findings support the valorisation of pistachio oil extraction by-products as functional food ingredients, offering a promising strategy for reducing food waste and promoting circular economy approaches in the agri-food sector. Full article

This study aimed to determine the impact of natural fermentation time on the chemical composition and antioxidant activities of cassava flour. Samples of flour were fermented for intervals of 12, 24, and 48 h and compared with the control (0 h). The results indicated clear differences in the chemical composition of these samples. The pH value was reduced, TTA increased, and TSS decreased. This is due to the action of lactic acid bacteria during fermentation. The TPC value also increased with fermentation time, achieving 2.95 mg GAE/g after 48 h, compared to 1.35 mg GAE/g initially. Antioxidant activities improved significantly; total antioxidant capacity surged from 23.50 µmol TE/g to 69.81 µmol TE/g over the 48 h fermentation period, based on ABTS, DPPH, and FRAP assays. Protein content also improved significantly, increasing from 1.82% to 3.10%, while the hydrogen cyanide content declined from 25.14 mg/100 g to 5.34 mg/100 g, signifying reduced nutritional risk. An increase in minerals was also noted, with calcium showing the highest concentration of 41.35 mg/100 g after 48 h of fermentation. These findings demonstrate the effectiveness of fermenting cassava flour by enhancing its chemical composition and antioxidant properties while lowering antinutrients, which improves its value in functional foods. Full article

Amaranth is a nutritional and naturally gluten-free pseudocereal with several food applications. The germination and pepsin/pancreatin hydrolysis in amaranth releases antioxidant and anti-inflammatory compounds but the hydrolysis times (270 or 360 min) are too long to scale up in the development of amaranth functional ingredients. The aim of this study was to estimate the influence of the germination and pepsin/pancreatin hydrolysis reduction time on the techno-functional properties and nutraceutical potential of amaranth flours and hydrolysates. The germination process increased 12.5% soluble protein (SP), 23.7% total phenolics (TPC), 259% water solubility, and 26% oil absorption in germinated amaranth flours (GAFs) compared to ungerminated amaranth flours (UAFs). The ungerminated (UAFH) and germinated (GAFH) amaranth hydrolysates showed values of degree of hydrolysis up to 50% with 150 min of sequential (pepsin + pancreatin) hydrolysis. The enzymatic hydrolysis released 1.5-fold SP and 14-fold TPC in both amaranth flours. The water solubility was higher in both hydrolysates than in their unhydrolyzed flour counterparts. The reduction in hydrolysis time did not significantly affect the nutraceutical potential of GAFH, enhancing its potential for further investigations. Finally, combining germination and enzymatic hydrolysis in amaranth enhances nutraceutical and techno-functional properties, increasing the seed. Consequently, GAF or GAFH could be used to elaborate on functional or gluten-free food products. Full article

A novel cellulose-degrading bacterial strain, D3-1, capable of degrading cellulose under medium- to high-temperature conditions, was isolated from soil samples and identified as Staphylococcus caprae through 16SrRNA gene sequencing. The strain’s cellulase production was optimized by controlling different factors, such as pH, temperature, incubation period, substrate concentration, nitrogen and carbon sources, and response surface methods. The results indicated that the optimal conditions for maximum cellulase activity were an incubation time of 91.7 h, a temperature of 41.8 °C, and a pH of 4.9, which resulted in a maximum cellulase activity of 16.67 U/mL, representing a 165% increase compared to pre-optimization levels. The above experiment showed that, when maize straw flour was utilized as a natural carbon source, strain D3-1 exhibited relatively high cellulase production. Furthermore, gas chromatography–mass spectrometry (GC-MS) analysis of products in the degradation liquid revealed the presence of primary sugars. The results indicated that, in the denitrification of simulated sewage, supplying maize straw flour degradation liquid (MSFDL) as the carbon source resulted in a carbon/nitrogen (C/N) ratio of 6:1 after a 24 h reaction with the denitrifying strain WH-01. The total nitrogen (TN) reduction was approximately 70 mg/L, which is equivalent to the removal efficiency observed in the glucose-fed denitrification process. Meanwhile, during a 4 h denitrification reaction in urban sewage without any denitrifying bacteria, but with MSFDL supplied as the carbon source, the TN removal efficiency reached 11 mg/L, which is approximately 70% of the efficiency of the glucose-fed denitrification process. Furthermore, experimental results revealed that strain D3-1 exhibits some capacity for nitrogen removal; when the cellulose-degrading strain D3-1 is combined with the denitrifying strain WH-01, the resulting TN removal rate surpasses that of a single denitrifying bacterium. In conclusion, as a carbon source in municipal sewage treatment, the degraded maize straw flour produced by strain D3-1 holds potential as a substitute for the glucose carbon source, and strain D3-1 has a synergistic effect with the denitrifying strain WH-01 on TN elimination. Thus, this research offers new insights and directions for advancement in environmental sewage treatment. Full article

Phenolic compounds are secondary metabolites widely distributed among plants, with bioactive properties, especially antioxidant activity. The search for sustainable extraction methods has driven the use of natural deep eutectic solvents (NaDESs), formed by combinations of natural compounds, such as organic acids, sugars, alcohols, and amino acids. This study optimized NaDES (sorbitol, citric acid, and glycine) efficiency and compared it to that of 70% methanol solution in extracting total soluble phenolic compounds (TSPCs) from six flours matrices—corn, buckwheat, biofortified orange sweet potato, red lentil, Sudan grass, and chickpea—before and after thermoplastic extrusion cooking. Quantification was performed using the Folin–Ciocalteu method, with statistical analysis at the 10% significance level. In general, the methanolic extracts showed higher TSPC levels in the raw materials, whereas the levels were higher in NaDESs for legumes. After extrusion, a reduction in the TSPC levels was observed, except in the sweet potato. Multivariate analysis (PLS-DA and heatmap) distinguished the raw and extruded samples, revealing structural and chemical changes from thermal processing. The AGREE scores were 0.7 (NaDES) and 0.54 (methanol), favoring NaDES. The BAGI score (75.0) confirmed the method’s robustness and suitability for sustainable analytical applications. Full article

With the growing interest in natural and health-supporting foods, oak acorns (Quercus robur) are gaining renewed attention for their nutritional and antioxidant potential. This study explored how different processing methods affect bioactive compounds in three acorn-based products: raw acorn flour, roasted “coffee,” and washed-and-roasted “super coffee.” Extracts were obtained using methanol, acetone, and hexane to evaluate total phenolic content (TPC), total flavonoid content (TFC), and antioxidant activity via ABTS, DPPH, CUPRAC, FRAP, and TRP assays. Methanol proved to be the most effective solvent, extracting up to 66.53 mg GAE/g dw of phenolics in raw flour and 76.50 mg GAE/g dw in roasted “coffee,” reflecting a 15% increase in TPC after thermal treatment. However, the same treatment resulted in a 17% decrease in flavonoid content, from 181.5 mg RE/g dw in raw flour to 150.67 mg RE/g dw in “super coffee.” Antioxidant activity followed a similar pattern, with methanol extracts showing the highest values, up to 584 mg TE/g dw in the CUPRAC assay and 126.7 mg TE/g dw in ABTS. Safety was also assessed through the quantification of 16 priority polycyclic aromatic hydrocarbons (PAHs). The total PAH levels in the roasted “coffee” and “super coffee” samples were 222 ng/g dw and 290 ng/g dw, respectively. Importantly, PAH4 compounds, used as key safety indicators in EU regulations, were present in low concentrations, primarily as benzo[a]anthracene (34.3–39.8 ng/g), and none exceeded the maximum limits established for cocoa-based products. Benzo[a]pyrene, a major carcinogen, was not detected. The results confirm that acorns of Quercus robur, especially in their native flour form, are rich in antioxidants, naturally gluten-free, and safe when thermally processed, making them a strong candidate for use in functional foods. Full article

Macro- and microelements in waste can be returned to the soil as fertilizers and their sustainable use can reduce the need to extract natural resources. For example, the use of carbonate-clay flour, sewage sludge and waste sulfate sulfur to improve soil properties enables the natural recycling of the nutrients contained in these materials. Soil physicochemical properties with the application of waste and the bioavailability of nutrients and trace elements were assessed before and after a 3-month incubation period. This study showed that when carbonate-clay flour was applied alone or together with sewage sludge and waste sulfur, it improved the properties of the soil, inducing a reduction in acidification and an increase in the content of available P, K and Mg. Sewage sludge also provided Zn, Cu, Ni and Cr in addition to organic carbon. Sulfate did not cause soil acidification. The results indicate that the use of carbonate-clay flour alone, as well as with the addition of sewage sludge and sulfate sulfur, can be recommended for the deacidification of soil and serve as a remediation tool for, for example, the precipitation of chemical pollutants. The valorization of the waste used fits into the circular economy approach. Full article

The production of food with a naturally enriched protein content is a strategic response to the growing global demand for sustainable protein sources. Wood distillate (WD), a by-product of the pyrolysis of woody biomass, has previously been shown to increase the protein concentration and bioavailability in chickpea seeds. Here, we evaluated the effect of 0.5% (v/v) WD soil drenching on chickpea productivity, nutritional profile, and proteomic pattern. WD treatment significantly improved the yield by increasing plant biomass (+144%), number of pods and seeds (+148% and +147%), and seed size (diameter: +6%; weight: +25%). Nutritional analyses revealed elevated levels of soluble proteins (+15%), starch (+11%), fructose (+135%), and polyphenols (+14%) and a greater antioxidant capacity (25%), alongside a reduction in glucose content, albeit not statistically significant, suggesting an unchanged or even lowered glycemic index. Although their concentration decreased, Ca (−31%), K (−12%), P (−5%), and Zn (−14%) in WD-treated plants remained within normal ranges. To preliminary assess the quality and safety of the protein enrichment, a differential proteomic analysis was performed on coarse flours from individual seeds. Despite the higher protein content, the overall protein profiles of the WD-treated seeds showed limited variation, with only a few storage proteins, identified as legumin and vicilin-like isoforms, being differentially abundant. These findings indicate a general protein concentration increase without a major alteration in the proteoform composition or differential protein synthesis. Overall, WD emerged as a promising and sustainable biostimulant for chickpea cultivation, capable of enhancing both yield and nutritional value, while maintaining the proteomic integrity and, bona fide, food safety. Full article

Chestnut flour, obtained through drying and milling of Castanea sativa fruits, has evolved from a subsistence food into a sought-after niche product, appreciated for its naturally gluten-free profile, high starch content, and richness in micronutrients. Over the past decade, its demand has steadily increased due to consumer perception of the health benefits associated with chestnut consumption. As the market for chestnut flour expanded from small-scale to large-scale production, alternative methods to the traditional process were developed. Its distinctive aroma and flavor are strongly influenced by processing methods, which are the focus of this study. Two drying approaches were compared: a traditional smoke-based method (drying house named metato) characterized by a wood-drying method and a controlled laboratory process using a forced-air dryer that maintained a constant temperature of 40 °C. The impact of these methods on the physico-chemical composition, volatile organic compounds (VOCs), and sensory properties of the flour was evaluated using chemical, instrumental, and sensory analyses. The traditional method enhanced the flour’s aromatic complexity and typicity through the application of smoke, which has been demonstrated to generate volatile organic compounds (VOCs), such as guaiacol, furfural, and o-creosol, that are associated with the smoked aroma. Nevertheless, if not properly managed, it can lead to undesirable sensory notes due to excessive smoke exposure. In contrast, the laboratory-controlled process ensured better preservation of bioactive compounds—such as polyphenols (351 mg GAE/100 g dm) and ascorbic acid (322 mg/kg dm)—while retaining the aroma notes associated with fresh chestnuts. Optimizing processing methods may support the valorization of chestnut flour as a high-quality ingredient in the modern gluten-free and functional food market. Full article

Fusarium head blight (FHB) is one of the most devastating diseases in wheat. Besides its negative impact on grain yield, FHB also negatively influences quality. Changes in sugar and free amino acid content were analyzed in flour from Fusarium-infected and non-infected grains of six wheat varieties differing in Fusarium resistance. The concentrations of sugars and free amino acids were determined using a high-performance liquid chromatography device. In flour from FHB-infected grains, the average total amount of fructose, glucose, maltose, total sugars, and total reducing sugars was significantly increased, compared to non-treated flour from the Tika Taka variety, which was the most FHB-susceptible. The total content of free amino acids in flour from FHB-infected varieties increased in proportion to their susceptibility. In Tika Taka, there was a significant increase in free amino acid content of about 46%, while a significant decrease of 16% was observed in the highly resistant Vulkan variety. A highly significant correlation was established between the degree of FHB susceptibility and the content of aspartic acid, glutamic acid, glutamine and histidine, glycine, alanine, methionine, valine, tryptophan, phenylalanine, leucine, and threonine. Most amino acids had strong positive correlations with each other, but among the sugars, only fructose and glucose content showed a strong positive correlation with specific amino acids that were induced by Fusarium infection. Overall, it can be concluded that FHB-susceptible varieties have a high risk of FHB infection, which results in the hydrolysis of sucrose into fructose and glucose, together with an increase in free amino acids, which deteriorates the quality of wheat. Full article

Snack foods are increasingly important because of irregular eating patterns in busy lives. Many consumers state that reading ingredients is important to them making rational choices when consuming snacks. This study investigates consumer’s reported avoidance of a wide range of 20 current and potential snack food ingredients. A survey of approximately 630 consumers in each of 13 countries was conducted using a Check-All-That-Apply (CATA) method. Cochran’s Q test was performed to compare percentages of avoidance among countries, and correspondence analysis and cluster analysis were conducted to visualize the similarity of avoidance tendency among countries. Results showed a high tendency to avoid insect powder, SAPP, and BHA, perhaps because of connotations such as disgust or their “non-natural” connotations. The aversion rates for soybean, corn, wheat flour, and pea flour were low. Significant differences (p < 0.05) between countries were found for all 20 ingredients. The countries were grouped into seven clusters based on similar avoidance tendencies. This research offers insights into consumer perceptions of snack food ingredients, helping manufacturers understand ingredient avoidance across cultures. These findings support tailored product strategies to enhance food safety policies. Ultimately, the study contributes valuable data for global marketing strategies and promotes innovation in response to health-conscious consumer trends. Full article

Background: Red macroalgal flour resulting from commercial phycocolloid extraction has been shown to include valuable preservative compounds. Methods: This study focused on the preservative effect of a gelatin-based packaging system including Gelidium sp. flour during refrigerated storage of Trachurus trachurus fillets. Different microbial and chemical indices related to quality loss were determined in fish muscle during a 6-day storage period at 4 °C. Results: Compared with gelatin-packaged control samples, those packaged in the system including the algal flour presented significantly lower microbial development (aerobic bacteria, psychrotrophic bacteria, and proteolytic bacteria) and significantly lower chemical indices related to microbial development (pH and trimethylamine). With respect to lipid oxidation, there was significantly greater retention of peroxides and significantly lower formation of secondary oxidation products in the samples packaged with the algal flour. Additionally, the algal flour group presented significantly less lipid hydrolysis. Conclusions: A preservative effect was derived from the addition of Gelidium flour to a gelatin-based packaging system during refrigerated storage of T. trachurus. This study supports the practical and valuable use of Gelidium sp. flour and addresses the current global interest in natural sources of preservative compounds and the use of marine byproducts. Full article

In recent years, sustainable agricultural practices in wheat cultivation have garnered significant attention, particularly those focused on minimizing pesticide and herbicide usage to safeguard the environment. One effective approach is green manuring, which entails rotating wheat with crops such as soybean and mustard to harness their natural pesticidal and herbicidal properties. While this method presents clear environmental advantages, it also poses a risk of cross-contamination, as these globally recognized allergens may unintentionally pass through wheat-based products. To protect consumers with allergies, there is an urgent need for a reliable analytical method to detect and quantify these allergenic proteins in wheat-derived foodstuffs. In this study, we assessed various protein extraction protocols to optimize the recovery of soybean and mustard allergens from wheat flour. The extracted proteins were analyzed using a bottom-up proteomics approach involving trypsin digestion, coupled with reversed-phase liquid chromatography and mass spectrometry in multiple reaction monitoring (MRM) mode. Two key allergenic proteins, Glycinin G1 and 11S Globulin, were selected as representative for soybean and mustard, respectively. The identified quantifier marker of Glycinin G1 was VLIVPQNFVVAAR (m/z 713.431²⁺), while FYLAGNQEQEFLK (m/z 793.896²⁺) and VFDGELQEGR (m/z 575.280²⁺) were designated as qualifier markers. The selection of specific marker peptides for mustard proved challenging due to the high structural similarity among proteins from Sinapis alba and other members of the Brassicaceae family. For 11S Globulin, FNTLETTLTR (m/z 598.319²⁺) was recognized as the quantifier marker, with VTSVNSYTLPILQYIR (m/z 934.019²⁺) serving as the qualifier marker. The developed method underwent thorough validation for linearity, limit of detection (LOD), limit of quantification (LOQ), recovery, repeatability, and reproducibility, as well as potential matrix and processing effects. This strategy successfully facilitated the identification and quantification of soybean and mustard allergenic proteins in complex, processed food matrices, including naturally contaminated flour and cookies. These findings enhance food safety monitoring and regulatory compliance, thereby helping to mitigate allergen-related risks in wheat-based products. Full article

This study focuses on the development and characterization of biodegradable polymer composites consisting of a polypropylene (PP) matrix, carbon black pigment, and hybrid fillers. The fillers incorporated into these composites consisted of a blend of fibers and particles derived from natural, biodegradable materials, such as flax fibers (FFs) and wood flour (WF) particles. The compositions of polymer material were expressed as PP/FF/WF weight ratios of 100/0/0, 70/5/25, and 70/10/20. The polymer materials were prepared using conventional plastic processing methods like extrusion to produce composite mixtures, followed by melt injection to manufacture the samples needed for characterization. The structural characterization of the polymer materials was conducted using optical microscopy and X-ray diffraction (XRD) analyses, while thermal, mechanical, and dielectric properties were also evaluated. Additionally, their biodegradation behavior under mold exposure was assessed over six months. The results were analyzed comparatively, and the optimal composition was identified as the polymer composite containing the highest flax fiber content, namely PP + 10 wt.% flax fiber + 20 wt.% wood flour. Full article