Search Results (214)

A superhydrophobic surface with hierarchical micro/nano-array structures was successfully fabricated on 6061 aluminum alloy through a combination of femtosecond laser etching and anodic oxidation. Femtosecond laser etching formed a regularly arranged microscale “pit-protrusion” array on the aluminum alloy surface. After modification with a fluorosilane ethanol solution, the surface exhibited superhydrophobicity with a contact angle of 154°. Subsequently, the anodic oxidation process formed an anodic oxide film dominated by an array of aluminum oxide (Al₂O₃) nanopores at the submicron scale. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses revealed that the nanopore structures uniformly and continuously covered the laser-ablated layer. This hierarchical structure significantly increased the surface water contact angle to 162°. Wettability analysis showed that the prepared composite coating formed an air layer accounting for 91% of the surface area. Compared with the sample only treated by femtosecond laser etching, the presence of the Al₂O₃ nanopore structure significantly enhanced the mechanical durability, superhydrophobic durability, and corrosion resistance of the superhydrophobic surface. The proposed multi-step fabrication strategy offers an innovative method for creating multifunctional, durable superhydrophobic coatings and has important implications for their large-scale industrial use. Full article

Cu-based nanomaterials have received considerable attention as promising and cost-effective substrates for surface-enhanced Raman spectroscopy (SERS) applications despite their relatively low enhancement factor (EF) compared to noble metals like gold and silver. In this study, a fast and affordable synthesis route is proposed to obtain a three-dimensional porous copper film (NPC) via an electrodeposition technique based on the dynamic hydrogen bubbling template (DHBT). Two sets of NPC film were synthesized, one without additives and the other with cetyltrimethylammonium bromide (CTAB). The impacts of deposition time on the NPCs’ porous morphology, thickness, and SERS performance were systematically investigated. With the optimal deposition time, the nanopore sizes could be tailored from 26.8 to 73 μm without additives and from 12.8 to 24 µm in the presence of CTAB. The optimal additive-free NPC film demonstrated excellent SERS performance at 180 s of deposition, while the CTAB-modified film showed strong enhancement at 120 s towards methylene blue (MB), a highly toxic dye, achieving a detection limit of 10⁻⁶ M. Additionally, the samples with CTAB showed better efficiency than those without CTAB. The calculated EF of NPC was found to be 5.9 × 10³ without CTAB and 2.5 × 10³ with the CTAB, indicating the potential of NPC as a cost-effective candidate for high-performance SERS substrates. This comprehensive study provides insights into optimizing the structural morphology of the NPCs to maximize their SERS enhancement factor and improve their detection sensitivity toward MB, thus overcoming the limitations associated with conventional copper-based SERS substrates. Full article

Desulfovibrio vulgaris is an anaerobic microorganism belonging to the group of sulphate-reducing bacteria (SRB). SRB form biofilms on metal surfaces in water supply networks, producing a microbiologically influenced corrosion (MIC). This process produces the deterioration of metal surfaces, leading to high economic costs and different environmental safety and health problems related to its chemical treatment. For that reason, rapid and accurate detection methods of SRB are needed. In this work, a new detection system for Desulfovibrio has been developed using gated nanoporous materials. The probe is based on hybrid nanoporous alumina films encapsulating a fluorescent molecule (rhodamine B), whose release is controlled by an oligonucleotide gate. Upon exposure to Desulfovibrio’s genomic material, a movement of the oligonucleotide gatekeeper happens, resulting in the selective delivery of the entrapped rhodamine B. The developed material shows high selectivity and sensitivity for detecting Desulfovibrio DNA in aqueous buffer and biological media. The implementation of this technology for the detection of Desulfovibrio as a tool for monitoring water supply networks is innovative and allows real-time in situ monitoring, making it possible to detect the growth of Desulfovibrio inside of pipes at an early stage and perform timely interventions to reverse it. Full article

Calcium ion sensors are essential in clinical diagnosis, particularly in the management of chronic kidney disease. Multiple approaches have been developed to measure calcium ions, including flame photometry and ion chromatography. However, these devices are bulky and require specialized staff for operation and evaluation. The integration of all-solid-state ion-selective determination allows the design of miniaturized and low-cost sensing that can be used for the continuous monitoring of electrolytes. However, clinical use has been limited due to the low electrochemical stability and selectivity and high noise rate. This manuscript reports for the first time a novel miniaturized Ca²⁺ ion-selective sensor, developed by using a two-layer nanocomposite thin film (5 µm thick). The device consists of functionalized silica nanoparticles embedded in a poly(vinyl chloride) (PVC) film, which was deposited onto a nanoporous zirconium silicate nanoparticle layer that served as the sensing surface. Systematic evaluation revealed that perfluoroalkane-functionalized silica nanoparticles enhanced Ca²⁺ selectivity by minimizing K⁺ diffusion, confirmed by both potentiometric measurements and quartz microbalance studies. The final sensor demonstrated a super-Nernstian sensitivity of 37 mV/Log[Ca²⁺], a low signal drift of 28 µV/s, a limit of detection of 1 µM, and exceptional selectivity against Na⁺, K⁺, and Mg²⁺ ions. Long-term testing showed stable performance over three months of continuous operation. Clinical testing was conducted on patients with chronic kidney disease. An accurate real-time monitoring of electrolyte dynamics in dialysate samples was observed, where final concentrations matched those observed in physiological conditions. Full article

Under high-temperature and high-pressure conditions, understanding the competitive adsorption and mobilization mechanisms of gas and water in fractured tight sandstone gas reservoirs is crucial for optimizing the recovery factor. This study employs molecular dynamics simulation to investigate the adsorption behavior and mobilization characteristics of H₂O and CH₄ in 10 nm quartz nanopores under the conditions of the Keshen fractured tight sandstone gas reservoir. The results indicate that H₂O exhibits strong adsorption on the quartz surface, forming two high-density adsorption layers with a thickness of approximately 0.6 nm, whereas CH₄ forms three adsorption layers with a thickness of about 1.1 nm. Under gas–water coexistence conditions, the competitive adsorption effect of the water phase significantly influences the distribution of CH₄. Due to the hydrophilicity of the quartz wall, H₂O molecules preferentially adsorb onto the wall surface, forming a stable water film that significantly inhibits CH₄ adsorption. When the water saturation reaches 35%, water molecules form liquid bridges within the pores, segmenting the gas phase into different regions. As water saturation further increases, more stable liquid bridge structures develop, and microscopic water lock effects emerge, further restricting gas flow. During depletion development, H₂O remains difficult to mobilize due to strong wall adsorption, with a recovery factor of only 7%. In contrast, CH₄ exhibits high mobility, with a recovery factor of up to 75%. However, as water saturation increases from 30% to 70%, the recovery factor of CH₄ decreases significantly from 75% to 29%, indicating that the water phase not only occupies pore space, but also exerts a blocking effect that significantly inhibits CH₄ percolation and production. This study provides important theoretical support for the development strategies of ultra-deep fractured tight sandstone gas reservoirs and offers key insights for improving the ultimate recovery factor under gas–water coexistence conditions. Full article

Anodic aluminum oxide (AAO) is a promising material for sensor applications due to its unique nanoporous structure and high surface area. This study investigates enhancing AAO’s sensing capabilities by incorporating carbyne-enriched nanomaterials. This research aimed to create a novel surface acoustic wave (SAW) sensor with improved performance characteristics. AAO films were fabricated using a two-step anodization process, followed by carbyne-enriched coating deposition via ion-assisted pulse-plasma deposition. The dielectric properties of the resulting composite material were characterized using impedance spectroscopy, while the sensing performance was evaluated by exposing the sensor to various ethanol concentrations. The results showed a significant increase in capacitance and dielectric permittivity for the carbyne-filled AAO compared to pristine AAO, along with a 5-fold improvement in sensitivity to ethanol vapor. The increased sensitivity is attributed to the synergistic combination of the AAO’s high surface area and the carbyne’s unique electrical properties. This work demonstrates the successful fabrication and characterization of a novel high-sensitivity gas sensor, highlighting the potential of carbyne-enriched AAO for advanced sensor applications. Full article

This research investigates the corrosion behavior of copper (Cu) through a comprehensive analysis of both plain and nanoporous Cu thin films. A combination of weight-loss methods for quantitative analysis, along with polarization testing and scanning electron microscopy, is employed for both quantitative and qualitative assessments of Cu corrosion dynamics. The corrosion mechanisms in chloride and nitrate solutions are compared, with an additional discussion on the influence of atmospheric oxygen (O₂). The results demonstrate that chloride ions and the presence of O₂ create the most severe corrosion conditions, while the concentration of salts has a relatively minor effect on the corrosion behavior. Notably, the comparative study reveals that nanoporous Cu exhibits a greater corrosion tendency, as indicated by more negative corrosion potentials. However, its corrosion rates are lower than those of plain Cu, as determined by corrosion current density measurements. Full article

In the present work, we present the process of preparing CdS nanostructures based on templating synthesis using chemical deposition (CD) on a SiO₂/Si substrate. A 0.7 μm thick silicon dioxide film was thermally prepared on the surface of an n-type conduction Si wafer, followed by the creation of latent ion tracks on the film by irradiating them with swift heavy Xe ions with an energy of 231 MeV and a fluence of 10⁸ cm⁻². As a result of etching in hydrofluoric acid solution (4%), pores in the form of truncated cones with different diameters were formed. The filling of the nanopores with cadmium sulfide was carried out via templated synthesis using CD methods on a SiO_2 nanopores/Si substrate for 20–40 min. After CdS synthesis, the surfaces of nanoporous SiO_2 nanopores/Si were examined using a scanning electron microscope to determine the pore sizes and the degree of pore filling. The crystal structure of the filled silica nanopores was investigated using X-ray diffraction, which showed CdS nanocrystals with an orthorhombic structure with symmetry group 59 Pmmn observed at 2θ angles of 61. 48° and 69.25°. Photoluminescence spectra were recorded at room temperature in the spectral range of 300–800 nm at an excitation wavelength of 240 nm, where emission bands centered around 2.53 eV, 2.45 eV, and 2.37 eV were detected. The study of the CVCs showed that, with increasing forward bias voltage, there was a significant increase in the forward current in the samples with a high degree of occupancy of CdS nanoparticles, which showed the one-way electronic conductivity of CdS/SiO₂/Si nanostructures. For the first time, CdS nanostructures with orthorhombic crystal structure were obtained using track templating synthesis, and the density of electronic states was modeled using quantum–chemical calculations. Comparative analysis of experimental and calculated data of nanostructure parameters showed good agreement and are confirmed by the results of other authors. Full article

In this work, a nanoporous ultrananocrystalline diamond film (B-UNCDWS/TDNT/Ti) was obtained and compared with a commercial electrode in the degradation of methomyl, a recalcitrant pesticide. The morphological and structural differences between the materials were highlighted by SEM and XRD analysis: while the commercial electrode presented a regular and planar surface with microcrystalline grains, supported by XRD features, the B-UNCDWS/TDNT/Ti electrode presented a porous morphology with DRX features indicating a high film renucleation rate. Those differences affected the electrooxidation of methomyl; B-UNCDWS/TDNT/Ti was responsible for faster and more economic degradation of the pollutant, achieving a methomyl degradation of 78% (against 35% by the commercial electrode). The highly porous surface of UNCDWS/TDNT/Ti provides an electrochemical area threefold greater than the one found in the commercial electrode, justifying the better efficiency in the formation of persulfate, which can be singled out as the main mechanism in methomyl degradation. Full article

Nanoporous copper (np-Cu) has attracted much more attention due to its lower cost compared to other noble metals and high functionality in practical use. Herein, Al_100−xCu_x(x = 13–88 at.%) precursor films with thicknesses of 0.16–1.1 μm were fabricated by varying magnetron co-sputtering parameters. Subsequently, utilizing a one-step dealloying strategy, a series of np-Cu films with ligament sizes ranging from 11.4–19.0 nm were synthesized. The effects of precursor composition and substrate temperature on the microstructure of np-Cu films were investigated. As the atomic ratio of Cu increases from 15 to 34, the np-Cu film detached from the substrate gradually transforms into a bi-continuous ligament-channel structure that is well bonded to the substrate. Furthermore, the novel bi-layer hierarchical np-Cu films were successfully prepared based on single-layer nanoporous films. Our findings not only contribute to the systematic understanding of the modification of the morphology and structure of np-Cu films but also offer a valuable framework for the design and fabrication of other non-noble nanoporous metals with tailored properties. Full article

High-performance and cost-efficient electrocatalysts and electrodes are needed to improve the hydrogen evolution reaction (HER) for the hydrogen (H₂) generation in electrolysers, including microbial electrolysis cells (MECs). In this study, free-standing carbon nanofiber (CNF) films with supported cobalt phosphide nanoparticles have been prepared by means of an up-scalable electrospinning process followed by a thermal treatment under controlled conditions. The produced cobalt phosphide-supported CNF films show to be nanoporous (pore volume up to 0.33 cm³ g⁻¹) with a high surface area (up to 502 m² g⁻¹) and with a suitable catalyst mass loading (up to 0.49 mg cm⁻²). Values of overpotential less than 140 mV at 10 mA cm⁻² have been reached for the HER in alkaline media (1 M KOH), which demonstrates a high activity. The high electrical conductivity together with the mechanical stability of the free-standing CNF films allowed their direct use as cathodes in a MEC reactor, resulting in an exceptionally low voltage operation (0.75 V) with a current density demand of 5.4 A m⁻². This enabled the production of H₂ with an energy consumption below 30 kWh kg⁻¹ H₂, which is highly efficient. Full article

In the pursuit of developing advanced nanofiltration membranes with high permeation flux for organic solvents, a TiO₂ nanofilm was synthesized via a vapor–liquid interfacial reaction on a flat-sheet α-Al₂O₃ ceramic support. This process involves the reaction of glycerol, an organic precursor with a structure featuring 1,2-diol and 1,3-diol groups, with TiCl₄ vapor to form organometallic hybrid films. Subsequent calcination in air at 250 °C transforms these hybrid films into carbon-doped titanium oxide nanofilms. The unique structure of glycerol plays a crucial role in determining the properties of the resulting nanopores, which exhibit high solvent permeance and effective solute rejection. The synthesized carbon-doped TiO₂ nanofiltration membranes demonstrated impressive performance, achieving a pure methanol permeability as high as 90.9 L·m⁻²·h ⁻¹·bar⁻¹. Moreover, these membranes exhibited a rejection rate of 93.2% for Congo Red in a methanol solution, underscoring their efficacy in separating solutes from solvents. The rigidity of the nanopores within these nanofilms, when supported on ceramic materials, confers high chemical stability even in the presence of polar solvents. This robustness makes the carbon-doped TiO₂ nanofilms suitable for applications in the purification and recovery of organic solvents. Full article

Porous copper films used in current collectors have been shown to improve the stability of Li-ion batteries. They can be applied in Si-based photodiodes, sensors or as microradiators. Their fabrication, however, remains a challenge. In this work, we report on the direct deposition of porous copper films using magnetron sputtering in regular chamber geometry. We show how by using appropriate process gases and substrate temperatures, it is possible to control the morphology of the deposited films. In particular, the optimization of the argon to oxygen flow ratios and flow values leads to small porosification of the deposited copper films. Further, heating the substrate during deposition enables the growth of pore sizes into mesoporous and macroporous ranges. This approach is scalable, and since it does not require glancing angle deposition enables the easy coverage of large surfaces with uniformly porous films. Full article

The prevalence of micropores and nanopores in low-permeability reservoirs is a cause for concern, as it results in a sizeable quantity of oil reserves being trapped within them. The water-gas dispersion system has the capacity to expand the reservoirs’ wave volume and enhance oil recovery. While the microscopic oil repulsion mechanism has been the center of attention, the oil repulsion effect of three distinct types of gases (N₂, CH₄, and CO₂) is of particular importance in understanding the displacement mechanism of N₂/CH₄/CO₂ on heptane at the blind end of the nanometer. A molecular dynamics simulation using the LAMMPS software was employed to construct a model of a blind end of heptane on a SiO₂ wall and an interface model with different types of gas molecules. This was done to investigate the microscopic mechanism of heptane replacement by gas molecules. The temperature (50 °C) and pressure (30 MPa) of the reservoir in the Changqing oil field are selected as the parameters for analysis. The findings indicate that all three types of gas molecules can enter the blind end and displace heptane. However, supercritical CO₂ forms a mixed phase with heptane, which is more prone to extruding oil molecules situated near the inner wall surface of the blind end and desorbing the oil film. The results demonstrate that, in the context of the blind end, gaseous CO₂ exhibits a lower solvation ability but superior extrusion diffusion ability for heptane compared to N₂ and CH₄. Furthermore, the interaction energy indicates that the interactions between two states of CO₂ and heptane, as well as the thickness of the interface, increase with increasing pressure and temperature. The findings of this study elucidate the microscopic mechanism underlying the replacement of oil droplets or oil films at the blind end by different gases under reservoir conditions at the molecular level and offer further guidance for the selection of the gas phase and the replacement state in the water-gas dispersive drive system. Full article

It is difficult for carbonaceous materials to combine a large specific surface area with flexibility. Here, a flexible all-carbon nanoarchitecture based on the in situ growth of nanoporous graphene within “skeletal-capillary” carbon nanotube (CNT) networks has been achieved by a chemical vapor deposition (CVD) process. Multi-path long-range conductivity is established, and the porous graphene provides a large specific surface area for charge storage. The flexibility of the films allows them to be directly used as binder-free electrodes for supercapacitors. Since the polymeric binders are saved, the supercapacitors exhibit a higher overall storage density. Full article