Search Results (945)

In the present work, six biochars were produced from the pyrolysis of poultry manure at 400 °C and 600 °C (PM-B-400 and PM-B-600), and their post-modification with, respectively, iron chloride (PM-B-400-Fe and PM-B-600-Fe) and potassium permanganate (PM-B-400-Mn and PM-B-600-Mn). First, these biochars were deeply characterized through the assessment of their particle size distribution, pH, electrical conductivity, pH at point-zero charge, mineral composition, morphological structure, and surface functionality and crystallinity, and then valorized as biofertilizer to grow spring barley at pot-scale for 40 days. Characterization results showed that Fe- and Mn-based nanoparticles were successfully loaded onto the surface of the post-modified biochars, which significantly enhanced their structural and surface chemical properties. Moreover, compared to the control treatment, both raw and post-modified biochars significantly improved the growth parameters of spring barley plants (shoot and root length, biomass weight, and nutrient content). The highest biomass production was obtained for the treatment with PM-B-400-Fe, owing to its enhanced physico-chemical properties and its higher ability in releasing nutrients and immobilizing heavy metals. These results highlight the potential use of Fe-modified poultry manure-derived biochar produced at low temperatures as a sustainable biofertilizer for soil enhancement and crop yield improvement, while addressing manure management issues. Full article

The development of non-toxic silver nanoparticles (AgNPs) for medical and other diverse applications is steadily increasing. However, this study specifically aims to determine the cytotoxic effects of AgNPs synthesized via a green chemistry approach using aqueous-ethanol and ethyl acetate extracts of Artemisia terrae-albae. The photophysical, morphological, and size distribution characteristics of the synthesized AgNPs are analyzed using UV-Vis spectroscopy and transmission electron microscopy (TEM). A modified Allium cepa assay is employed to evaluate biological responses, including root growth, root number, and mitotic index. In this assay, the cell cycles of onion bulbs are synchronized and pre-incubated at 4 °C for 72 h prior to treatment. This study reveals that the AgNPs synthesized from the ethanol extract exhibit notable stability and higher cytotoxicity activity, with a root length of 0.6 ± 0.13 cm, root number of 16 ± 6.88, and mitotic index of 25.0 ± 2.6. These values are significantly more cytogenotoxic than those observed for the ethyl-acetate-derived nanoparticles, which show a root length of 0.8 ± 0.17 cm, root number of 18 ± 6.27, and mitotic index of 36 ± 3.6. These findings highlight the potential of green-synthesized AgNPs as effective cytotoxic agents, especially those obtained from ethanol extract, possibly due to a greater influence of the quantity of diverse phenolic compounds present in the complex mixtures than in the ethyl acetate extract, which otherwise enhanced their morphology, shape, and size. These, overall, contributed to the biological activity. Full article

Although favorable effects of Selenium nanoparticles (SeNPs or nSe) in tomato have been reported, research has concentrated on stress alleviation and disease management. From the above it is noticeable that the effect of NPs varies greatly depending on the model plant, nanoparticle (concentration, size, shape), and application (foliar or drenching). For this reason, the objective of this study was to investigate the impact of biostimulating tomato plants under no stressor conditions (Solanum lycopersicum cv. ‘Pomodoro’ L.) with SeNPs on morpho-physiological and fruit quality parameters. Three doses of Selenium nanoparticles (5, 15, and 30 mg L⁻¹), and a control were applied via a foliar application after transplanting. The results indicate that a 5 mg L⁻¹ SeNP treatment improved the growth and yield of the tomato, with the exception of the root length and leaf weight. Moreover, all doses modified the evaluated physiology, bioactive compounds, and fruit quality parameters. This research helped in understanding the SeNPs’ effect on tomato plants in greenhouses under a no stressor condition. Full article

Background/Objectives: Paclitaxel (PTX) is widely used in the treatment of a variety of solid tumours due to its broad-spectrum anti-tumour activity, but its use in brain gliomas is limited by insufficient blood–brain tumour barrier (BBTB) penetration and systemic toxicity. The aim of this study was to develop a Solutol HS-15-based micellar nanoparticle (PSM) to enhance the brain glioma targeting of PTX and reduce toxicity. Methods: PSMs were prepared by solvent injection and characterised for particle size, encapsulation rate, haemolysis rate and in vitro release properties. A C6 in situ glioma mouse model was used to assess the brain targeting and anti-tumour effects of the PSM by in vivo imaging, tissue homogenate fluorescence analysis and bioluminescence monitoring. Meanwhile, its safety was evaluated by weight monitoring, serum biochemical indexes and histopathological analysis. Results: The particle size of PSMs was 13.45 ± 0.70 nm, with an encapsulation rate of 96.39%, and it demonstrated excellent cellular uptake. In tumour-bearing mice, PSMs significantly enhanced brain tumour targeting with a brain drug concentration 5.94 times higher than that of free PTX. Compared with Taxol, PSMs significantly inhibited tumour growth (terminal luminescence intensity <1 × 10⁶ p/s/cm²/Sr) and did not cause significant liver or kidney toxicity or body weight loss. Conclusions: PSMs achieve an efficient accumulation of brain gliomas through passive targeting and EPR effects while significantly reducing the systemic toxicity of PTX. Its simple preparation process and excellent therapeutic efficacy support its use as a potential clinically translational candidate for glioma treatment. Full article

Selenium nanoparticles (SeNPs), with their high absorption and antioxidant properties, hold promise as feed additives in aquaculture, enhancing growth and reproductive health in fish. This review evaluates how selenium nanoparticles influence growth and reproductive traits in Asian seabass (L. calcarifer). Using the PRISMA approach, we examined the impacts of selenium nanoparticles (SeNPs) on the growth performance and gonadal development of Asian seabass (L. calcarifer) by synthesizing findings from the existing literature. Meta-analysis explored that selenium nanoparticles (SeNPs) supplementation significantly improved specific growth rate (SGR) (pooled effect size = 3.97; 95% CI: 3.68–4.26) and feed conversion ratio (FCR) (pooled effect size = 0.81; 95% CI: 0.75–0.86), with low heterogeneity. Regarding reproductive outcomes, SeNPs enhanced gonadal development, sperm quality, and steroidogenesis. Significant improvements were observed in gonadosomatic index (effect size = 0.5), fertilization rate (0.6), and testosterone levels (0.5), along with a reduction in abnormal embryogenesis (−0.3) (p < 0.05). While an optimal level of SeNPs is effective for enhancing aquaculture performance, excessive use may lead to toxicity; therefore, their economic viability, environmental impact, and sustainability in large-scale aquaculture warrant further investigation. This review provides insights for researchers, policymakers, and industry stakeholders on the potential of SeNPs in advancing sustainable aquaculture through fish productivity and reproductive performance. Full article

Background/Objectives: Chemotherapy-induced alopecia is a common and distressing side effect of cancer treatment, significantly impacting patients’ psychological well-being. Nanocarriers offer a promising strategy for targeted drug delivery to hair follicles, while chitosan nanoparticles have demonstrated hair-growth-promoting properties. This study explores the potential of chitosan nanoparticles as a topical delivery system for five pharmacological agents—phenobarbital, pioglitazone, rifampicin, N-acetylcysteine, and tacrolimus—to prevent chemotherapy-induced alopecia. Methods: Drug-loaded chitosan nanoparticles were prepared using the ionic gelation technique and characterized by particle size, zeta potential, entrapment efficiency, FT-IR spectroscopy, and TEM imaging. Their efficacy was assessed in a cyclophosphamide-induced alopecia model in C57BL/6 mice through macroscopic observation, histopathological examination, and scanning electron microscopy of regrown hair. Results: The prepared particles were spherical, cationic, and between 205 and 536 nm in size. The entrapment efficiencies ranged from 8% to 63%. All five drugs mitigated follicular dystrophy, shifting the hair follicle response from dystrophic catagen to dystrophic anagen. Phenobarbital demonstrated the most significant hair regrowth and quality improvements, followed by N-acetyl cysteine and pioglitazone. Tacrolimus showed moderate efficacy, while rifampicin was the least effective. Conclusions: These findings suggest that phenobarbital-loaded chitosan nanoparticles represent a promising approach for the prevention and treatment of chemotherapy-induced alopecia, warranting further investigation for clinical applications. Full article

The increasing demand for sustainable disease management in aquaculture has intensified interest in plant-based therapeutics. This study evaluated the formulation and efficacy of andrographolide-loaded nanostructured lipid carriers (AND-NLCs) in Nile tilapia (Oreochromis niloticus) challenged with Streptococcus agalactiae ENC06. AND-NLCs were prepared by the phase-inversion technique and characterized by dynamic light scattering, transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and in vitro release profiling. Antibacterial activity was assessed by measuring inhibition zone diameters, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC). Growth performance, feed utilization, hepatosomatic index (HSI), and disease resistance were evaluated over a 60-day feeding trial. The AND-NLCs exhibited an optimal particle size (189.6 nm), high encapsulation efficiency (90.58%), sustained release, and structural stability. Compared to the free AND and control group, AND-NLC supplementation significantly improved growth, feed efficiency, HSI, and positive allometric growth. It also enhanced survival (73.3%) and relative percent survival (RPS = 65.6%) following S. agalactiae ENC06 infection. Antibacterial efficacy and physiological responses showed positive correlations with nanoparticle characteristics. These findings suggest that AND-NLCs enhance bioavailability and therapeutic efficacy, supporting their potential as a functional dietary additive to promote growth and improve disease resistance in tilapia aquaculture. Full article

Platelet-rich plasma (PRP) has become an increasingly valuable biologic approach for personalized regenerative medicine because of its potent anti-inflammatory/healing effects. It is thought to be an excellent source of growth factors that can promote tissue healing and lessen fibrosis. Although this treatment has demonstrated effectiveness in numerous disease areas, its impact on pulmonary fibrosis (PF) caused by silver nanoparticles (AgNPs) via its antiapoptotic effects remains to be explored. AgNPs were synthesized biologically by Bacillus megaterium ATCC 55000. AgNP characterization was carried out via UV–Vis spectroscopy, X-ray diffraction (XRD), dynamic light scattering (DLS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM) imaging to reveal monodispersed spheres with a mean diameter of 45.17 nm. A total of 48 male Wistar rats divided into six groups, with 8 rats per group, were used in the current study on the basis of sample size and power. The groups used were the PRP donor, control, AgNP, AgNP + PRP, AgNP + dexamethasone (Dexa) rat groups, and a recovery group. Body weights, hydroxyproline (HP) levels, and CASP3 and TWIST1 gene expression levels were assessed. H&E and Sirius Red staining were performed. Immunohistochemical studies for inducible nitric oxide synthase (iNOS) and cluster of differentiation 68 (CD68) with histomorphometry were conducted. A significant reduction in body weight (BWt) was noted in the AgNP group compared with the AgNP + PRP group (p < 0.001). HP, CASP3, and TWIST1 expression levels were significantly increased by AgNPs but decreased upon PRP (p < 0.001) treatment. Compared with those in the control group, the adverse effects of AgNPs included PF, lung alveolar collapse, thickening of the interalveolar septa, widespread lymphocytic infiltration, increased alveolar macrophage CD68 expression, and iNOS positivity in the cells lining the alveoli. This work revealed that PRP treatment markedly improved the histopathological and immunohistochemical findings observed in the AgNP group in a manner comparable to that of the Dexa. In conclusion, these results demonstrated the therapeutic potential of PRP in a PF rat model induced via AgNPs. This study revealed that PRP treatment significantly improved the histopathological and immunohistochemical alterations observed in the AgNP-induced group, with effects comparable to those of the Dexa. In conclusion, these findings highlight the therapeutic potential of PRP in a rat model of AgNP-induced PF. Full article

For the first time, a mixture of PbTe and Pb- and Te-oxides coated with carbon, under electron beam irradiation (EBI), was transformed into quantum dots, nanocrystals, nanoparticles and grains of PbTe with a sintered appearance. A small portion of non-stoichiometric phases was also obtained. By selecting conditions that favor the instantaneous transformation, the Gibbs free energy barrier is lowered for obtaining different PbTe structures. The driving force associated with the high-energy milling requires 4 h of processing time to reach a complete transformation, while a high-energy source kinetically affects precursor surfaces to cause an abrupt global chemical transformation instantly. Importantly, the size of the PbTe structures increases as they approach the irradiation point, implying a growth process that is affected by the local temperature reached during the EBI. Imaging after the EBI process revealed morphological variations in PbTe, which can be attractive for use in thermoelectric materials. The results of this study provide the first insights into electron-beam-induced reactions using a multiphase mixture of precursors. Therefore, it is believed that this proposal can also be applied to obtain other binary semiconductor structures, even ternary ones. Full article

In this paper, titanium oxide nanoparticles (TiO₂-NPs) with complex surface topologies were obtained for the first time using simple procedures applied in laser sintering. Based on the obtained nanoparticles and polymethyl methacrylate-like photopolymer resin, a composite material (MPR/TiO₂-NPs) for 3D printing was created using the MSLA technology. Products made of the material containing from 0.001 to 0.1% wt. TiO₂-NPs didn’t contain internal defects and were less brittle than the resin without nanoparticles. Products made of the MPR/TiO₂-NPs material were well polished; after polishing, areas with a variation in the surface profile height of less than 10 nm were found on the surfaces. Nanoparticles in the volume of products made of the material are apparently unevenly distributed; there are alternating areas of micrometer sizes with slightly higher and slightly lower concentrations of nanoparticles. Spectroscopy showed that adding the developed nanoparticles promoted better polymerization of the MPR resin. The addition of nanoparticles to the material slightly increased its ability to generate active forms of oxygen and damage biomacromolecules. At the same time, the resulting material exhibits significant antibacterial properties and doen’t affect the growth and reproduction of animal cells. The created material can be a very effective basis for the additive manufacturing of products with improved physical and chemical properties and balanced biological activity. Full article

Zinc oxide nanoparticles (ZnO NPs) have attracted significant attention due to their wide-ranging applications in animal production, largely because of their notable biocompatibility, low toxicity, and strong antimicrobial activity. These properties make ZnO NPs a promising substitute for traditional antibiotics. Their application could address the growing concern of antibiotic resistance in livestock industries. This review examines the unique physicochemical characteristics of ZnO NPs, including their nanoscale size and high surface area, which contribute to their biological functionality. Emphasis is placed on green synthesis methods that minimize environmental impact while producing high-quality ZnO NPs. In animal farming, ZnO NPs play a crucial role not only in promoting growth and improving immune responses, but also in enhancing meat and egg quality. Additionally, this review discusses the environmental and safety implications of ZnO NPs, considering their sustainable application potential in future animal production practices, aimed at fostering a more eco-friendly and efficient livestock sector. Full article

Due to its sarcoma-derived origin and the associated carcinogenic risks, as well as its lack of tissue-specific extracellular matrix biochemical cues, the use of the injectable gel scaffold Matrigel is generally restricted to research applications. Therefore, the development of new fully synthetic injectable gel scaffolds that exhibit performance comparable to Matrigel is a high priority. In this study, we developed a novel fully synthetic injectable gel scaffold by combining a biodegradable PLGA-PEG-PLGA copolymer, clay nanoparticle LAPONITE®, and L-arginine-loaded metal–organic frameworks (NU-1000) at the nano level. An aqueous solution of the developed hybrid scaffold (PLGA-PEG-PLGA/LAPONITE®/L-Arg@NU-1000) exhibited rapid sol–gel transition at body temperature following simple injection and formed a continuous bulk-sized gel, demonstrating good injectability. Long-term sustained slow release of L-arginine from the resultant gels can be achieved because NU-1000 is a suitable reservoir for L-arginine. PLGA-PEG-PLGA/LAPONITE®/L-Arg@NU-1000 hybrid gels exhibited good compatibility with and promoted the growth of human skeletal muscle satellite cells. Importantly, in vivo experiments using skeletal muscle injury model mice demonstrated that the tissue regeneration efficiency of PLGA-PEG-PLGA/LAPONITE®/L-Arg@NU-1000 gels is higher than that of Matrigel. Specifically, we judged the higher tissue regeneration efficacy of our gels by histological analysis, including MYH3 immunofluorescent staining, H&E staining, and Masson’s trichrome staining. Taken together, these data suggest that novel hybrid hydrogels could serve as injectable hydrogel scaffolds for in vivo tissue engineering and ultimately replace Matrigel. Full article

Gold nanoparticles (AuNPs) anchored on graphene oxide (GO) have had a significant interest for their unique optical, electrical, and catalytic properties. This study presents an eco-friendly and sustainable synthesis of AuNPs on GO sheets using L-ascorbic acid (L-aa) as a green reducing agent and polyvinylpyrrolidone (PVP) as a stabilizer. The effect of reductant concentration on nanoparticle morphology was systematically investigated using UV–Visible spectroscopy and transmission electron microscopy (TEM). Results indicate the formation of AuNPs anchored on GO sheets and that an increase in the L-aa amount leads to both an increase in nanoparticle size and a morphological transition from spherical to irregular structures. The simultaneous nucleation and growth processes result in the formation of multiple families of nanostructures, as confirmed by TEM analysis, which reveals two distinct size distributions. At higher L-aa concentrations, the nanoparticles shape evolves into irregular morphologies due to selective growth along a preferential facet. This approach not only enables precise control over AuNP size and shape but also aligns with green chemistry principles, making it a promising route for applications in plasmonics, sensors, and photothermal therapy. Full article

This study focuses on the chemical synthesis of nano-titanium dioxide (nano-TiO₂) via ammonium fluorotitanate ((NH₄)₂TiF₆) precipitation with ammonia solution, aiming to elucidate the effects of experimental parameters—including reaction temperature, duration, molar ratio of (NH₄)₂TiF₆ to ammonia, and (NH₄)₂TiF₆ concentration—on the particle size of synthesized nanoparticles, as well as the correlation between particle size and photocatalytic performance. The synthesized nanoparticles predominantly exhibited spindle-shaped morphology. Direct TEM imaging revealed the crystallization and growth mechanisms during synthesis: higher molar ratios, combined with lower temperatures and shorter durations, facilitated the formation of ultrafine particles, whereas lower molar ratios, with elevated temperatures and prolonged reaction times, yielded larger particles. Notably, nanorod structures emerged under low-temperature conditions with F⁻ ion adsorption. To investigate the relationship between particle size and photocatalytic performance, a Taguchi method-inspired experimental design was employed to evaluate the positive or negative impacts of particle size on photocatalytic activity. An experimental matrix was constructed using coded values for each factor, and regression coefficients were calculated to quantify input-output correlations. Results demonstrate that titanium dioxide catalysts with a particle size range of 50–75 nm exhibit optimal photocatalytic efficiency. Full article

Tomato waste (TW) was employed as a sustainable source for the synthesis of fluorescent carbon dots (CDs) via a microwave-assisted hydrothermal carbonization (Mw-HTC) method, aiming at its valorization. Several amines were used as nitrogen additives to enhance the fluorescence quantum yield (QY) of CDs, and a set of reaction conditions, including additive/TW mass ratio (0.04–0.32), dwell time (15–60 min), and temperature (200–230 °C) of the HTC process, were scrutinized. The structural analysis of the tomato waste carbon dots (TWCDs) was undertaken by FTIR and ¹H NMR techniques, revealing their most relevant features. In solid state, transmission electron microscopy (TEM) analysis showed the presence of nearly spherical nanoparticles with an average lateral size of 8.1 nm. Likewise, the topographical assessment by atomic force microscopy (AFM) also indicated particles’ heights between 3 and 10 nm. Their photophysical properties, revealed by UV–Vis, steady-state, and time-resolved fluorescence spectroscopies, are fully discussed. Higher photoluminescent quantum yields (up to 0.08) were attained when the biomass residues were mixed with organic aliphatic amines during the Mw-HTC process. Emission tunability is a characteristic feature of these CDs, which display an intensity average fluorescence lifetime of 8 ns. The new TWCDs demonstrated good antioxidant properties by the ABTS radical cation method (75% inhibition at TWCDs’ concentration of 5 mg/mL), which proved to be related to the dwell time used in the CDs synthesis. Moreover, the synthesized TWCDs suppressed the growth of Escherichia coli and Staphylococcus aureus at concentrations higher than 2000 μg/mL, encouraging future antibacterial applications. Full article