Search Results (97)

The application of bioinspired nanocomposites in orthopedic implants marks a significant innovation in biomedical engineering, aimed at overcoming long-standing limitations of conventional implant materials. Traditional implants frequently suffer from poor osseointegration, mechanical mismatch with bone, and vulnerability to infection. Bioinspired nanocomposites, modeled after the hierarchical structures found in natural tissues such as bone and nacre, offer the potential to enhance mechanical performance, biological compatibility, and implant functionality. This study reviews and synthesizes current advancements in the design, fabrication, and functionalization of bioinspired nanocomposite materials for orthopedic use. Emphasis is placed on the integration of nanocrystalline hydroxyapatite (nHA), carbon nanotubes (CNTs), titanium dioxide (TiO₂) nanotubes, and other nanostructured coatings that mimic the extracellular matrix. Methods include comparative evaluations of mechanical properties, surface modifications for biocompatibility, and analyses of antibacterial efficacy through nano-topographical features. Bioinspired nanocomposites have been shown to improve osteoblast adhesion, proliferation, and differentiation, thereby enhancing osseointegration. Nanostructured coatings such as TiO₂ nanotubes increase surface hydrophilicity and corrosion resistance, supporting long-term implant stability. Mechanically, these composites offer high stiffness, superior wear resistance, and improved strength-to-weight ratios. Biomimetic combinations of hydroxyapatite, zirconia, and biopolymers have demonstrated effective load transfer and reduced stress shielding. Additionally, antibacterial functionality has been achieved via nanostructured surfaces that deter bacterial adhesion while remaining cytocompatible with host tissues. The integration of bioinspired nanocomposites into orthopedic implants provides a multifunctional platform for enhancing clinical outcomes. These materials not only replicate the mechanical and biological properties of native bone but also introduce new capabilities such as infection resistance and stimuli-responsive behavior. Despite these advancements, challenges including manufacturing scalability, long-term durability, and regulatory compliance remain. Continued interdisciplinary research is essential for translating these innovations from laboratory to clinical practice. Full article

In the present paper, the fatigue performance of a TC6 titanium alloy with a microstructure gradient and residual stress gradient produced by laser shock peening (LSP) is investigated. After LSP, a 1 mm thickness gradient compressive residual stress layer with a maximum surface compressive residual stress of −708 MPa is introduced into the materials. Electron back-scattering diffraction (EBSD) and transmission electron microscopy (TEM) techniques are used to characterize the microstructural evolution of the TC6 titanium alloy subjected to LSP. The results show that a nanostructured layer forms on the surface of the TC6 titanium alloy. At a depth of 20 μm, high dense dislocation and nanocrystalline are observed on the top surface. Based on the results of the microstructural characterization, it is found that dislocation movement is the main reason for the formation of nanocrystalline on the top surface. A high-cycle fatigue test showed that the fatigue limit of the TC6 titanium alloy treated by LSP improves from 431 ± 10 MPa to 486 ± 14 MPa, increasing by 12.8%. Full article

Algerian coal, traditionally exploited as a fossil fuel, can be valorized as a nanostructured carbon source for sustainable technologies. Reinterpreted physicochemical data highlight porous morphology, nanocrystalline carbon (~18 nm), and diverse functional groups. These features enable practical applications in adsorption for environmental remediation, coal-supported catalysis, energy storage electrodes, and polymer nanocomposites. New statistical analyses and schematic representations emphasize functionality rather than raw characterization, distinguishing this work from earlier studies. By positioning coal within a circular economy framework, this study demonstrates its potential as a renewable, low-cost nanocarbon material contributing to green chemistry and advanced material design. Full article

The effect of dislocation pile-ups responsible for the generation or annihilation of dislocations during friction of Ag and Ni was considered. The steady-state friction was accompanied by the formation of twin bundles, intersecting twins, dislocations, adiabatic elongated shear bands, and intense dynamic recrystallization. The mechanisms of microstructural stability and friction instability were analyzed. The theoretical models of dislocation generation and annihilation in nanocrystalline FCC metals in the context of plastic deformation and failure development under friction were proposed. The transition to unstable friction was estimated. The damage of Ag was exhibited in the formation of pores, reducing the contact area and significantly increasing the shear stress. The brittle fracture of Ni represents a catastrophic failure associated with the formation of super-hard nickel oxide. Deformation resistance of the dislocation structures in the mesoscale and macroscale was compared. The coefficient of similitude (K) has been introduced in this work to compare plastic deformation at different scales. The model of the strength–ductility trade-off and microstructural instability is considered. The interaction between the migration of dislocation pile-ups and the driving forces applied to the grain boundaries was estimated. Nanostructure stabilization through the addition of a polycrystalline element (solute) to the crystal interiors in order to reduce the free energy of grain boundary interfaces was investigated. The thermodynamic driving force and kinetic energy barrier involved in strengthening, brittleness, or annealing under plastic deformation and phase formation in alloys and composite materials were examined. Full article

The paradigm of molecular-network conformations in Se-rich glassy arsenoselenides As_xSe_100−x compositionally approaching pure Se (x < 10) is considered, employing comprehensive XRD analysis of diffuse peak-halos and nanocrystalline reflections from the known Se polymorphs in their XRD patterns. Within a modified microcrystalline model, the changes with growing Se content in these alloys are interpreted in terms of suppression in intermediate range ordering due to shifting to high diffraction angles and a narrowed FSDP (first sharp diffraction peak)-related diffuse peak-halo, accompanied by enhancement in extended range ordering due to a shift to low diffraction angles and a broadened SSDP (second sharp diffraction peak)-related peak-halo. Overlapping of these peak-halos is enhanced in Se-rich alloys, tending towards unified FSDP-SSDP-related halos with characteristic doublet asymmetry due to the remnants of nanocrystalline trigonal t-Se. Drastic enhancement of the crystallization processes related to the trigonal t-Se phase is a principal feature of nanostructurization effects in Se-rich glassy arsenoselenides driven by nanomilling. The nanostructurization response in these alloys is revealed as a fragmentation impact on the correlation length of the FSDP-responsible entities, accompanied by an agglomeration impact on the correlation length of the SSDP-responsible entities. The FSDP- and SSDP-related diffuse peak-halos become more distinguishable in the XRD patterning of nanostructured arsenoselenides, being associated with other contributions from crystalline remnants, such as those expected in transition to glassy arsenoselenides with higher Se content. An irregular sequence of randomly distributed cis- and trans-configurated multiatomic Se linkages is visualized by ab initio quantum-chemical modeling of Se_n chain- and ring-like conformations. The most critical point of molecular-network disproportionality analysis in the examined arsenoselenide As_xSe_100−x glassy alloys obeying the chain-crossing model corresponds to x = 7 (equivalent to 93 at. % of Se in the binary As-Se system), as an equilibrium point between mixed cis-trans-configurated Se₇ chains and exceptionally cis-configurated molecular Se₈ rings. At the basis of developed models, the paradigm of thermodynamically stable molecular-network conformations in the nanostructured Se-rich arsenoselenides As_xSe_100−x (x < 10) is surely resolved in favor of chain-like network-forming conformations composed of mixed cis-trans-configurated network-forming multiatomic Se fragments. Full article

Nanocrystalline materials based on titanium dioxide possess unique properties, including photocatalytic and antibacterial activities. Despite many approaches have already been utilized to fabricate and characterize pure and doped TiO₂, a systematic description of its nanostructured samples depending on the synthesis method has not been presented yet. In this study, we shed new light on the process–structure relationships of nanocrystalline TiO₂-based powders fabricated by extraction–pyrolytic, hydrothermal, and sol–gel techniques. The comprehensive analysis of the fabricated nanocrystalline TiO₂-based powders with different anatase/rutile phase content is performed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The hydrothermal and sol–gel methods are also used to grow TiO₂ particles doped with Cu and Er-Yb. The correlation between synthesis parameters (pyrolysis and annealing temperature) and properties of the produced materials is studied. Particular attention is paid to Raman spectroscopy and the detailed comparison of our obtained data with existing experimental and theoretical studies. Full article

The spray pyrolysis deposition of nanostructured Pb_1−xSn_xSe alloy films, x = 0.0 to 1.0, from as-prepared Pb_1−xSn_xSe alloy colloids as the starting solution is reported. The colloidal dispersions were prepared by dissolving selenium in an amine–thiol mixture, reacted with the Sn and Pb precursors in propylene glycol, and subsequently sprayed onto glass substrates at 300 °C. Structural characterization indicated the formation of the alloyed rock-salt cubic phase for 0.0 ≤ x ≤ 0.75, oxidized Pb and Se phases produced during the deposition, and only orthorhombic SnSe for x = 1.0 with Se and SnSe₂ as impurities. Nanocrystalline films ranging from 16 to 16.5 nm in size were obtained. The films displayed a shift in their optical structure and a non-monotonic variation in the band gap energy, first a decrease, reaching the minimum at x = 0.30 and a further increase in the Sn content. The decrease in the optical band gap resembles that of a topological insulator behavior. The morphology of the alloyed films confirmed the large nanocrystal formation by self-assembly processes in both the PbSe and SnSe phases and segregated PbSnSe platelets for x ≥ 0.30. Seebeck coefficient revealed that a typical semiconductor behavior dominated by bipolar transport, and p-type conductivity, but only for x = 0.0 n-type conductivity was exhibited. The maximal Seebeck coefficient magnitude behaved similarly to the band gap energy, evidencing the influence of energy band structure and the topological character. Full article

This study investigates the structural and catalytic properties of pure and Sr-doped LaCoO₃ and LaFeO₃ thin films for potential use as resistive gas sensors. Thin films were deposited via pulsed laser deposition (PLD) and characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), atomic force microscopy (AFM), nanoindentation, and scratch tests. XRD analysis confirmed the formation of the desired perovskite phases without secondary phases. XPS revealed the presence of La³⁺, Co³⁺/Co⁴⁺, Fe³⁺/Fe⁴⁺, and Sr²⁺ oxidation states. SEM and AFM imaging showed compact, nanostructured surfaces with varying morphologies (shape and size of surface irregularities) depending on the composition. Sr doping led to surface refinement and increased nanohardness and adhesion. Transmission electron microscopy (TEM) analysis confirmed the columnar growth of nanocrystalline films. Sr-doped LaCoO₃ demonstrated enhanced sensitivity and stability in the presence of NO₂ gas compared to pure LaCoO₃, as evidenced by electrical resistivity measurements within 230 ÷ 440 °C. At the same time, it was found that Sr doping stabilizes the catalytic activity of LaFeO₃ (in the range of 300 ÷ 350 °C), although its behavior in the presence of NO₂ differs from that of LaCo(Sr)O₃—especially in terms of response and recovery times. These findings highlight the potential of Sr-doped LaCoO₃ and LaFeO₃ thin films for NO₂ sensing applications. Full article

Nanocrystalline (NC) materials have widespread industrial usage. X-ray and neutron diffraction techniques are primary tools for studying the structural and microstructural features of NC materials. Selected area electron diffraction (SAED) patterns collected using a transmission electron microscope (TEM) on polycrystalline nanostructured materials, featuring nested rings, that are analogous to Debye–Scherrer patterns, possess similar potentials to aid materials characterisation. The utility of SAED patterns is further enhanced by the possibility of applying crystallographic approaches, like full pattern fitting procedures, based on Rietveld refinement algorithms, enabling the evaluation of material features, such as crystallite size, lattice distortions, defect structures, and the presence of secondary phases even from very small volume scale. In this paper, we have discussed the possibilities afforded by a Rietveld code applied to SAED patterns of NC materials, including the mathematical implementation of the two-beam dynamical correction model in MAUD software (version 2.9995), and a critical discussion of the results obtained on different NC materials. Full article

Fracture toughness is a critical indicator for the application of NiTi alloys in medical fields. We propose to enhance the fracture toughness of NiTi alloys by controlling the spatial grain size (GS) gradient. Utilizing rolling processes and heat treatment technology, three categories of NiTi alloys with distinct spatial GS distributions were fabricated and subsequently examined through multi-field synchronous fracture tests. It is found that the one with a locally ultra-high GS gradient (20 nm−3.4 μm) has significantly enhanced fracture toughness, which is as high as 412% of that of the normally distributed nano-grains with an average GS of 8 nm and 178% of that of the coarse-grains with an average GS of 100 nm. Theoretical analysis reveals that in such a gradient structure, phase transition in the coarse-grained matrix greatly absorbs the surface energy of subcritical and stable propagation. Meanwhile, the locally non-uniform GS distribution leads to deviation and tortuosity of the crack path, increasing the critical fracture stress. Furthermore, the nanocrystalline clusters distributed in the form of network nodes reduce the stress intensity factor due to their higher elastic modulus compared to the coarse-grained matrix. This work provides guidance for developing new gradient nanostructured NiTi alloys with high fracture toughness. Full article

Bio-nanomaterials are gaining increasing attention due to their renewable and eco-friendly characteristics. Among these, nanocrystalline cellulose (NCC) stands out as one of the most advanced materials for applications in food, healthcare, composite production, and beyond. In this study, NCC was successfully extracted from cotton-based textile waste using a combination of chemical and mechanical methods. The cellulose fibers were first hydrolyzed using a dilute HCl solution, neutralized, and then dried, resulting in microcrystalline cellulose (MCC) with diameters ranging from 7 to 15 µm and lengths up to 300 µm (as observed via optical microscopy and scanning electron microscopy, SEM). To achieve nanoscale dimensions, NaOH/urea solution with mechanical treatment was applied, resulting in the successful extraction of NCC in the supernatant, particularly under room-temperature conditions. Dynamic light scattering (DLS) analysis confirmed the presence of nanostructures (average sizes ranging from 120 nm to 750 nm), and atomic force microscopy (AFM) analysis verified the nanoscale range (diameters between 2 and 4 nm and lengths from 200 nm to 1 µm). Fourier transform infrared (FTIR) spectroscopy revealed the conversion of cellulose I to cellulose II, confirming the successful transformation into NCC. For the first time, NCC was obtained from undyed cotton textile wastes using NaOH/urea treatment after HCl hydrolysis, eliminating the need for pre-treatment and intermediate steps. Full article

Integrating nanocrystalline diamond (NCD) films on silicon chips has great practical significance and many potential applications, including high-power electronic devices, microelectromechanical systems, optoelectronic devices, and biosensors. In this study, we provide a solution for ensuring heterogeneous interface integration between silicon (Si) chips and NCD films using low-temperature bonding technology. This paper details the design and implementation of a magnetron sputtering layer on an NCD surface, as well as the materials and process for the connection layer of the integrated interface. The obtained NCD/Ti/Cu composite layer shows uniform island-like Cu nanostructures with 100~200 nm diameters, which could promote bonding between NCD and Si chips. Ultimately, a heterogeneous interface preparation of Si/Ag/Cu/Ti/NCD was achieved, with the integration temperature not exceeding 250 °C. The TEM analysis shows the closely packed atomic interface of the Cu NPs and deposited Ti/Cu layers, revealing the bonding mechanism. Full article

Owing to their high producibility and resistance to corrosion, austenitic chromium–nickel steels are widely used in the chemical, petroleum, and food industries. However, their significant disadvantage lies in their poor structural performance, which cannot be improved by heat treatment. This significantly limits the usability of these steels in parts of machines that operate under friction loads. Hardening can be achieved by decreasing the size of grains and applying deformation-induced martensitic transformation. Nanostructuring burnishing (NSB) may be one of the technologies suited for producing parts of tribological assemblies with enhanced operating characteristics. Nanostructuring burnishing using a sliding indenter is being developed as a method of industrial surface nanocrystallization through severe plastic deformation used in the mechanical machining of various types of parts. This article investigates the possibility of enhancing the mechanical and tribological properties of nanocrystallized surfaces of austenitic steels, which are formed through nanostructuring burnishing using a tool with a natural diamond spherical indenter and a change in sliding speed from 40 to 280 m/min with one, three, and five passes. Increasing the tool sliding speed makes surface nanostructuring machining of big parts highly effective. This paper aims to establish the influence exerted by the sliding speed and number of indenter passes on the formation of a nanocrystalline structure, as well as on the modification of microhardness and residual stresses, texture, and tribological properties of the surface layer in the nanostructuring burnishing of AISI 304 steel. Transmission microscopy and microdurometry, 3D-profilometry, and tribological tests of surfaces nanocrystallized with the “ball-on-disk” scheme with dry and lubricated friction established the optimal values of speed and number of passes for a spherical indenter in nanostructuring burnishing. Full article

Acetone detection is of significant importance in various industries, from cosmetics to pharmaceuticals, bioengineering, and paints. Sensor manufacturing involves the use of different semiconductor materials as well as different metals for doping and functionalization, allowing them to achieve advanced or unique properties in different sensor applications. In the healthcare field, these sensors play a crucial role in the non-invasive diagnosis of various diseases, offering a potential way to monitor metabolic conditions by analyzing respiration. This article presents the synthesis method, using chemical solutions and rapid thermal annealing technology, to obtain Al-functionalized and Ni-doped copper oxide (Al/CuO:Ni) nanostructured thin films for biosensors. The nanocrystalline thin films are subjected to a thorough characterization, with examination of the morphological properties by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analysis. The results reveal notable changes in the surface morphology and structure following different treatments, providing insight into the mechanism of function and selectivity of these nanostructures for gases and volatile compounds. The study highlights the high selectivity of developed Al/CuO:Ni nanostructures towards acetone vapors at different concentrations from 1 ppm to 1000 ppm. Gas sensitivity is evaluated over a range of operating temperatures, indicating optimum performance at 300 °C and 350 °C with the maximum sensor signal (S) response obtained being 45% and 50%, respectively, to 50 ppm gas concentration. This work shows the high potential of developed technology for obtaining Al/CuO:Ni nanostructured thin films as next-generation materials for improving the sensitivity and selectivity of acetone sensors for practical applications as breath detectors in biomedical diagnostics, in particular for diabetes monitoring. It also emphasizes the importance of these sensors in ensuring industrial safety by preventing adverse health and environmental effects of exposure to acetone. Full article

Mg-based materials have been widely studied as potential hydrogen storage media due to their high theoretical hydrogen capacity, low cost, and abundant reserves. However, the sluggish hydrogen absorption/desorption kinetics and high thermodynamic stability of Mg-based hydrides have hindered their practical application. Ball milling has emerged as a versatile and effective technique to synthesize and modify nanostructured Mg-based hydrides with enhanced hydrogen storage properties. This review provides a comprehensive summary of the state-of-the-art progress in the ball milling of Mg-based hydrogen storage materials. The synthesis mechanisms, microstructural evolution, and hydrogen storage properties of nanocrystalline and amorphous Mg-based hydrides prepared via ball milling are systematically reviewed. The effects of various catalytic additives, including transition metals, metal oxides, carbon materials, and metal halides, on the kinetics and thermodynamics of Mg-based hydrides are discussed in detail. Furthermore, the strategies for synthesizing nanocomposite Mg-based hydrides via ball milling with other hydrides, MOFs, and carbon scaffolds are highlighted, with an emphasis on the importance of nanoconfinement and interfacial effects. Finally, the challenges and future perspectives of ball-milled Mg-based hydrides for practical on-board hydrogen storage applications are outlined. This review aims to provide valuable insights and guidance for the development of advanced Mg-based hydrogen storage materials with superior performance. Full article