Search Results (15)

Mycelium-bonded composites (MBCs), or myco-composites, represent a novel engineered material that combines natural lignocellulosic substrates with a fungal matrix. As a sustainable alternative to plastics, MBCs are gaining increasing interest; however, their large-scale industrial adoption remains limited, partly due to low social acceptance resulting from their unattractive appearance. Laser engraving provides a promising method for fabricating intricate patterns and functional surfaces on MBCs, minimizing tool wear, material loss, and environmental impact, while enhancing esthetic and engineering properties. This study investigates the influence of CO₂ laser parameters on the material removal rate during the engraving of myco-composites, focusing on the effects of variable laser power, beam defocus, and head feed rate on engraving outcomes. The results demonstrate that laser power and beam focus significantly impact material removal in mycelium-bonded composites. Specifically, increasing the laser power results in greater material removal, which is more pronounced when the beam is focused due to higher energy density. In contrast, a beam defocused by 1 mm produces less intense material removal. These findings highlight the critical role of beam focus—surpassing the influence of power alone—in determining engraving quality, particularly on irregular or uneven surfaces. Moreover, reducing the laser head feed rate at a constant power level increases the material removal rate linearly; however, it also results in excessive charring and localized overheating, revealing the low thermal tolerance of myco-composites. These insights are essential for optimizing laser processing techniques to fully realize the potential of mycelium-bonded composites as sustainable engineering materials, simultaneously maintaining their appearance and functional properties. Full article

Mycomaterials are biomaterials made by inoculating a lignocellulosic substrate with a fungus, where the mycelium acts as a binder and enhances material properties. These materials are well suited as sustainable alternatives to conventional insulation materials thanks to their good insulation properties, low density, degradability, and fire resistance. However, they suffer from mold contamination in moist environments and poor perception (“organic” appearance). Furthermore, most mycomaterials to date have been derived from a limited range of fungal species, leaving the vast phenotypic diversity of fungi largely untapped. We hypothesized that by exploring a broader range of strains, we could enhance the likelihood of discovering a material that meets the needs for insulation panels. We generated mycomaterials from nine fungal strains and measured their thermal conductivity, mold resistance, and perception properties. We observed significant variations across strains on these three parameters. Thermal conductivity ranged from levels comparable to extruded polystyrene to nearly as effective as polyurethane (0.039 to 0.019 W/mK). All materials generated were hydrophobic (equivalent to 105–122° contact angle), but differed by a factor of two in color appearance and sensitivity to mold (0–94% of surface colonized). We also found a method to improve resistance to mold using deactivated contaminant propagules. Full article

Aspergillus flavus can cause mildew in corn, peanuts, and other foods as well as animal feed, which seriously endangers human and livestock health; thus, preventing A. flavus contamination is imperative. Previous studies have found that the secondary metabolites of Bacillus subtilis BS-Z15 have broad-spectrum-inhibiting fungal activity, further confirming that the main active inhibiting fungal substance is Mycosubtilin (Myco). In this paper, corn and peanuts were treated with 0, 100, and 200 μg/mL BS-Z15 secondary metabolites (BS-Z15-SMA) for 7 days, and the aflatoxin contamination prevention effect was examined. The results showed that with increasing BS-Z15-SMA concentration, the aflatoxin contamination prevention effect was significantly enhanced. The above toxicity phenomena became more significant with extended BS-Z15-SMA treatment time. Scanning electron microscopy showed that 4 μg/mL Myco treatment resulted in a dented A. flavus surface and breakage of both the conidial stem and the mycelium. Transcriptome results showed that Myco significantly affected gene expression in A. flavus spores. The downregulated genes were significantly enriched in cell wall synthesis, transcription and translation, transmembrane transport pathways, and pathways related to key enzymes for aflatoxin synthesis. These results suggest that Myco could be used as a new bioactive material to prevent aflatoxin synthesis and contamination. Full article

The construction industry makes a significant contribution to global CO₂ emissions. Material extraction, processing, and demolition account for most of its environmental impact. As a response, there is an increasing interest in developing and implementing innovative biomaterials that support a circular economy, such as mycelium-based composites. The mycelium is the network of hyphae of fungi. Mycelium-based composites are renewable and biodegradable biomaterials obtained by ceasing mycelial growth on organic substrates, including agricultural waste. Cultivating mycelium-based composites within molds, however, is often wasteful, especially if molds are not reusable or recyclable. Shaping mycelium-based composites using 3D printing can minimize mold waste while allowing intricate forms to be fabricated. In this research, we explore the use of waste cardboard as a substrate for cultivating mycelium-based composites and the development of extrudable mixtures and workflows for 3D-printing mycelium-based components. In this paper, existing research on the use of mycelium-based material in recent 3D printing efforts was reviewed. This review is followed by the MycoPrint experiments that we conducted, and we focus on the main challenges that we faced (i.e., contamination) and the ways in which we addressed them. The results of this research demonstrate the feasibility of using waste cardboard as a substrate for cultivating mycelia and the potential for developing extrudable mixtures and workflows for 3D-printing mycelium-based components. Full article

Lupinus species have been sporadically reported to be colonized by arbuscular mycorrhizal fungi (AMF). The interactions between AMF and lupine plants could also be non-symbiotic, from positive to negative, as controlled by the stress conditions of the plant. The goal of the study was to reveal the existence of such positive interactions and provide preliminary data for a myco-phytoremediation technology of mining dumps using L. angustifolius as a first crop. The objective was to test the hypothesis that the AMF inoculation of an acidified dump material contaminated with heavy metals would improve the growth of L. angustifolius and decrease oxidative stress. The design consisted of a one-month bivariate pot experiment with plants grown in a mining dump soil inoculated and not inoculated with a commercial AMF inoculum sequestered in expanded clay and watered with acidic and neutral water. There was no AMF root colonization under the experimental conditions, but under neutral and acidic water conditions, the phosphorus concentrations in roots and leaves increased, and the superoxide dismutase and peroxidase activities significantly decreased due to AMF inoculation. The increase in leaf phosphorus concentration was correlated with the decrease in peroxidase activity. The fresh weight of shoots and leaves significantly increased due to the commercial inoculum (under acidic water conditions). At the end of the experiment, the ammonium concentration in the substrate was higher in the inoculated treatments than in the not inoculated ones, and the concentrations of many elements in the dump material decreased compared to the start of the experiment. A comprehensive discussion of the potential mechanisms underlying the effects of the commercial AMF inoculum on the non-host L. angustifolius is completed. Full article

Nanotechnology based on nanoscale materials is rapidly being used in clinical settings, particularly as a new approach for infectious illnesses. Recently, many physical/chemical approaches utilized to produce nanoparticles are expensive and highly unsafe to biological species and ecosystems. This study demonstrated an environmentally friendly mode of producing nanoparticles (NPs) where Fusarium oxysporum has been employed for generation of silver nanoparticles (AgNPs), which were further tested for their antimicrobial potentials against a variety of pathogenic microorganisms. The characterization of NPs was completed by UV–Vis spectroscopy, DLS and TEM, where it has been found that the NPs were mostly globular, with the size range of 50 to 100 nm. The myco-synthesized AgNPs showed prominent antibacterial potency observed as zone of inhibition of 2.6 mm, 1.8 mm, 1.5 mm, and 1.8 mm against Vibrio cholerae, Streptococcus pneumoniae, Klebsiella pneumoniae and Bacillus anthracis, respectively, at 100 µM. Similarly, at 200 µM for A. alternata, A. flavus and Trichoderma have shown zone of inhibition as 2.6 mm, 2.4 mm, and 2.1 mm, respectively. Moreover, SEM analysis of A. alternata confirmed the hyphal damage where the layers of membranes were torn off, and further EDX data analysis showed the presence of silver NPs, which might be responsible for hyphal damage. The potency of NPs may be related with the capping of fungal proteins that are produced extracellularly. Thus, these AgNPs may be used against pathogenic microbes and play a beneficial role against multi-drug resistance. Full article

Mycelium-based composites (MBCs) are alternative biopolymers for designing sustainable furniture and other interior elements. These innovative biocomposites have many ecological advantages but present a new challenge in aesthetics and human product acceptance. Grown products, made using living mycelium and lignocellulosic substrates, are porous, have irregular surfaces and have irregular coloring. The natural origin of these types of materials and the fear of fungus can be a challenge. This research investigated the level of human acceptance of the new material. Respondents were students of architecture who can be considered as people involved in interior design and competent in the design field. Research has been performed on the authors’ prototype products made from MBCs. Three complementary consumer tests were performed. The obtained results measured the human reactions and demonstrated to which extents products made of MBCs were “likeable” and their nonobvious aesthetics were acceptable to the public. The results showed that MBC materials generally had a positive or not-negative assessment. The responses after the pairwise comparison of the MBC with wall cladding samples pointed out the advantage of ceramic reference material above the MBC based on an overall assessment. The respondents also believed that the chamotte clay cladding would be easier to fit into the aesthetics of a modern interior and would in better accordance with its style. Although the MBC was less visually appealing, the respondents nevertheless found it more interesting, original, and environmentally friendly. The experiments suggested that the respondents had double standards regarding MBCs. MBCs were generally accepted as ecological, but not in their own homes. All of these results support current and future applications of MBCs for manufacturing items where enhanced aesthetics are required. Full article

Plastic waste inefficiently recycled poses a major environmental concern attracting attention from both civil society and decision makers. Counteracting the phenomenon is an important challenge today. New possibilities are being explored to find alternatives to plastics, and one of them refers to mycelium-composite materials (MCM). Our study aimed at investigating the possibility of using wood and litter inhabiting basidiomycetes, an underexplored group of fungi that grow fast and create strong mycelial mats, to produce biodegradable materials with valuable properties, using cheap by-products as a substrate for growth. Seventy-five strains have been tested for their ability to grow on low-nutrient media and to form compact mycelial mats. Eight strains were selected further for evaluation on several raw substrates for producing in vitro myco-composites. The physico-mechanical properties of these materials, such as firmness, elasticity and impermeability, were analyzed. Abortiporus biennis RECOSOL73 was selected to obtain, at the laboratory scale, a real biodegradable product. Our results suggest that the strain used is a promising candidate with real possibilities for scalability. Finally, corroborating our results with scientific available data, discussions are being made over the feasibility of such technology, cost-effectiveness, scalability, availability of raw materials and, not least, where future studies should be directed to. Full article

Fungi-based materials (myco-materials) have been celebrated and experimented with for their architectural and structural potential for over a decade. This paper describes research applied to assembly strategies for growing large building units and assembling them into efficiently formed wall prototypes. A major concern in the development of these two fabrication strategies is to design re-usable formwork systems. La Parete Fungina demonstrates two undulating wall units standing side-by-side, each composed of seventeen myco-welded slabs. L’Orso Fungino revisits the in situ monolithic fabric forming of units that are repeated, stacked, and post-tensioned. Although the design and research presented in this paper focuses on overcoming the challenges of growing large-scale building components, this work also touches on issues of accessibility and technology, economic and logistical systems needed for building-scale applications, and material ethics of energy and waste associated with emerging biomaterial production. Full article

Multicomponent materials, where nanosized selenium (Se) is dispersed in polymer matrices, present as polymer nanocomposites (NCs), namely, selenium polymer nanocomposites (SeNCs). Selenium as an inorganic nanofiller in NCs has been extensively studied for its biological activity. More ecologically safe and beneficial approaches to obtain Se-based products are the current challenge. Biopolymers have attained great attention with perspective multifunctional and high-performance NCs exhibiting low environmental impact with unique properties, being abundantly available, renewable, and eco-friendly. Composites based on polysaccharides, including beta-glucans from edible and medicinal mushrooms, are bioactive, biocompatible, biodegradable, and have exhibited innovative potential. We synthesized SeNCs on the basis of the extracellular polysaccharides of several medicinal mushrooms. The influence of bio-composites from mushrooms on potato plant growth and tuber germination were studied in two potato cultivars: Lukyanovsky and Lugovskoi. Bio-composites based on Grifola umbellata demonstrated the strongest positive effect on the number of leaves and plant height in both cultivars, without negative effect on biomass of the vegetative part. Treatment of the potato tubers with SeNC from Gr. umbellata also significantly increased germ length. Potato plants exposed to Se-bio-composite from Ganoderma lucidum SIE1303 experienced an increase in the potato vegetative biomass by up to 55% versus the control. We found earlier that this bio-composite was the most efficient against biofilm formation by the potato ring rot causative agent Clavibacter sepedonicus (Cms). Bio-composites based on Pleurotus ostreatus promoted increase in the potato root biomass in the Lugovskoi cultivar by up to 79% versus the control. The phytostimulating ability of mushroom-based Se-containing bio-composites, together with their anti-phytopathogenic activity, testifies in favor of the bifunctional mode of action of these Se-biopreparations. The application of stimulatory green SeNCs for growth enhancement could be used to increase crop yield. Thus, by combining myco-nanotechnology with the intrinsic biological activity of selenium, an unexpectedly efficient tool for possible applications of SeNCs could be identified. Full article

Biological materials that are created by growing mycelium-forming fungal microorganisms on natural fibers can form a solution to environmental pollution and scarcity of natural resources. Recent studies on the hybridization of mycelium materials with glass improved fire performance; however, the effect of inorganic particles on growth performance and mechanical properties was not previously investigated. Yet, due to the wide variety of reinforcement particles, mycelium nanocomposites can potentially be designed for specific functions and applications, such as fire resistance and mechanical improvement. The objectives of this paper are to first determine whether mycelium materials reinforced with montmorillonite nanoclay can be produced given its inorganic nature, and then to study the influence of these nanoparticles on material properties. Nanoclay–mycelium materials are evaluated in terms of morphological, chemical, and mechanical properties. The first steps are taken in unravelling challenges that exist in combining myco-fabrication with nanomaterials. Results indicate that nanoclay causes a decreased growth rate, although the clay particles are able to penetrate into the fibers’ cell-wall structure. The FTIR study demonstrates that T. versicolor has more difficulty accessing and decaying the hemicellulose and lignin when the amount of nanoclay increases. Moreover, the addition of nanoclay results in low mechanical properties. While nanoclay enhances the properties of polymer composites, the hybridization with mycelium composites was not successful. Full article

Filamentous fungi are a large and diverse taxonomically group of microorganisms found in all habitats worldwide. They grow as a network of cells called hyphae. Since filamentous fungi live in very diverse habitats, they produce different enzymes to degrade material for their living, for example hydrolytic enzymes to degrade various kinds of biomasses. Moreover, they produce defense proteins (antimicrobial peptides) and proteins for attaching surfaces (hydrophobins). Many of them are easy to cultivate in different known setups (submerged fermentation and solid-state fermentation) and their secretion of proteins and enzymes are often much larger than what is seen from yeast and bacteria. Therefore, filamentous fungi are in many industries the preferred production hosts of different proteins and enzymes. Edible fungi have traditionally been used as food, such as mushrooms or in fermented foods. New trends are to use edible fungi to produce myco-protein enriched foods. This review gives an overview of the different kinds of proteins, enzymes, and peptides produced by the most well-known fungi used as cell factories for different purposes and applications. Moreover, we describe some of the challenges that are important to consider when filamentous fungi are optimized as efficient cell factories. Full article

This research explores the carbon removal of a novel bio-insulation composite, here called MycoBamboo, based on the combination of bamboo particles and mycelium as binder. First, an attributional life cycle assessment (LCA) was performed to define the carbon footprint of a European bamboo plantation and a bio-insulation composite, as well as its ability to remove CO₂ along its lifecycle at a laboratory scale. Secondly, the Global Worming Potential (GWP) was estimated through a dynamic LCA with selected end-of-life and technical replacement scenarios. Finally, a building wall application was analyzed to measure the carbon saving potential of the MycoBamboo when compared with alternative insulation materials applied as an exterior thermal insulation composite system. The results demonstrate that despite the negative GWP values of the biogenic CO₂, the final Net-GWP was positive. The technical replacement scenarios had an influence on the final Net-GWP values, and a longer storage period is preferred to more frequent insulation substitution. The type of energy source and the deactivation phase play important roles in the mitigation of climate change. Therefore, to make the MycoBamboo competitive as an insulation system at the industrial scale, it is fundamental to identify alternative low-energy deactivation modes and shift all energy-intensity activities during the production phase to renewable energy. Full article

Wood decay fungi (WDF) seem to be particularly suitable for developing myco-materials due to their mycelial texture, ease of cultivation, and lack of sporification. This study focused on a collection of WDF strains that were later used to develop mycelium mats of leather-like materials. Twenty-one WDF strains were chosen based on the color, homogeneity, and consistency of the mycelia. The growth rate of each strain was measured. To improve the consistency and thickness of the mats, an exclusive method (newly patented) was developed. The obtained materials and the corresponding pure mycelia grown in liquid culture were analyzed by both thermogravimetric analysis (TGA) and scanning electron microscopy (SEM) to evaluate the principal components and texture. TGA provided a semi-quantitative indication on the mycelia and mat composition, but it was hardly able to discriminate differences in the production process (liquid culture versus patented method). SEM provided keen insight on the mycelial microstructure as well as that of the mat without considering the composition; however, it was able to determine the hyphae and porosity dimensions. Although not exhaustive, TGA and SEM are complementary methods that can be used to characterize fungal strains based on their desirable features for various applications in bio-based materials. Taking all of the results into account, the Fomitopsis iberica strain seems to be the most suitable for the development of leather-like materials. Full article

The article at hand follows the understanding that future cities cannot be built the same way as existing ones, inducing a radical paradigm shift in how we produce and use materials for the construction of our habitat in the 21st century. In search of a methodology for an integrated, holistic, and interdisciplinary development of such new materials and construction technologies, the chair of Sustainable Construction at KIT Karlsruhe proposes the concept of “prototypological” research. Coined through joining the terms “prototype” and “typology”, prototypology represents a full-scale application, that is an experiment and proof in itself to effectively and holistically discover all connected aspects and address unknowns of a specific question, yet at the same time is part of a bigger and systematic test series of such different typologies with similar characteristics, yet varying parameters. The second part of the article applies this method to the research on mycelium-bound building materials, and specifically to the four prototypologies MycoTree, UMAR, Rumah Tambah, and Futurium. The conclusion aims to place the results into the bigger research context, calling for a new type of architectural research. Full article