Search Results (447)

Graphene quantum dots (GQDs) obtained by microwave-induced pyrolysis of glutamic acid and triethylenetetramine (trien) are fairly stable, emissive, water-soluble, and positively charged nano-systems able to interact with negatively charged meso-tetrakis(4-sulfonatophenyl) porphyrin (TPPS₄). The stoichiometric control during the preparation affords a supramolecular adduct, GQDs@TPPS₄, that exhibits a double fluorescence emission from both the GQDs and the TPPS₄ fluorophores. These supramolecular aggregates have an overall negative charge that is responsible for the condensation of cations in the nearby aqueous layer, and a three-fold acceleration of the metalation rates of Cu²⁺ ions has been observed with respect to the parent porphyrin. Addition of various metal ions leads to some changes in the UV/Vis spectra and has a different impact on the fluorescence emission of GQDs and TPPS₄. The quenching efficiency of the TPPS₄ emission follows the order Cu²⁺ > Hg²⁺ > Cd²⁺ > Pb²⁺ ~ Zn²⁺ ~ Co²⁺ ~ Ni²⁺ > Mn²⁺ ~ Cr³⁺ >> Mg²⁺ ~ Ca²⁺ ~ Ba²⁺, and it has been related to literature data and to the sitting-atop mechanism that large transition metal ions (e.g., Hg²⁺ and Cd²⁺) exhibit in their interaction with the macrocyclic nitrogen atoms of the porphyrin, inducing distortion and accelerating the insertion of smaller metal ions, such as Zn²⁺. For the most relevant metal ions, emission quenching of the porphyrin evidences a linear behavior in the micromolar range, with the emission of the GQDs being moderately affected through a filter effect. Deliberate pollution of the samples with Zn²⁺ reveals the ability of the GQDs@TPPS₄ adduct to detect sensitively Cu²⁺, Hg^2+, and Cd²⁺ ions. Full article

Amyloid-β (Aβ) aggregates are considered as the important factors of Alzheimer’s disease (AD). Multifunctional materials have shown significant effects in the diagnosis and treatment of AD by modulating the aggregation of Aβ and production of reactive oxygen species (ROS). Compared to traditional surgical treatment and radiotherapy, phototherapy has the advantages, including short response time, significant efficacy, and minimal side effects in disease diagnosis and treatment. Recent studies have shown that local thermal energy or singlet oxygen generated by irradiating certain organic molecules or nanomaterials with specific laser wavelengths can effectively degrade Aβ aggregates and depress the generation of ROS, promoting progress in AD diagnosis and therapy. Herein, we outline the development of photothermal therapy (PTT) and photodynamic therapy (PDT) strategies for the diagnosis and therapy of AD by modulating Aβ aggregation. The materials mainly include organic photothermal agents or photosensitizers, polymer materials, metal nanoparticles, quantum dots, carbon-based nanomaterials, etc. In addition, compared to traditional fluorescent dyes, aggregation-induced emission (AIE) molecules have the advantages of good stability, low background signals, and strong resistance to photobleaching for bioimaging. Some AIE-based materials exhibit excellent photothermal and photodynamic effects, showing broad application prospects in the diagnosis and therapy of AD. We further summarize the advances in the detection of Aβ aggregates and phototherapy of AD using AIE-based materials. Full article

Background/Objectives: There is an increasing incidence of fungal infections in conjunction with the rise in resistance to medical treatment. Antimicrobial resistance is frequently associated with virulence factors such as adherence and the capacity of biofilm formation, which facilitates the evasion of the host immune response and resistance to drug action. Novel therapeutic strategies have been developed to overcome antimicrobial resistance, including the use of different type of nanomaterials: metallic (Au, Ag, Fe₃O₄ and ZnO), organic (e.g., chitosan, liposomes and lactic acid) or carbon-based (e.g., quantum dots, nanotubes and graphene) materials. The objective of this study was to evaluate the action of nanoparticles of different synthesis and with different coatings on fungi of medical interest. Methods: Literature research was conducted using PubMed and Google Scholar databases, and the following terms were employed in articles published up to June 2025: ‘nanoparticles’ in combination with ‘fungal biofilm’, ‘Candida biofilm’, ‘Aspergillus biofilm’, ‘Cryptococcus biofilm’, ‘Fusarium biofilm’ and ‘dermatophytes biofilm’. Results: The utilization of nanoparticles was found to exert a substantial impact on the reduction in fungal biofilm, despite the presence of substantial variability in minimum inhibitory concentration (MIC) values attributable to variations in nanoparticle type and the presence of capping agents. It was observed that the MIC values were lower for metallic nanoparticles, particularly silver, and for those synthesized with polylactic acid compared to the others. Conclusions: Despite the limited availability of data concerning the stability and biocompatibility of nanoparticles employed in the treatment of fungal biofilms, it can be posited that these results constitute a significant initial step. Full article

Quantum-dot cellular automata (QCA) offer a high-performance, low-power alternative to traditional VLSI technology for nanocomputing. However, the existing metal-dot QCA-based parity generators and checker circuits suffer from increased energy dissipation, larger area consumption, and complex multilayered layouts, limiting their practical feasibility. This work designs a 3-bit parity generator and 4-bit checker to address these challenges using an optimized modified majority voter-based Ex-OR gate in QCA. A single-layered layout was simulated in QCADesigner 2.0.3, avoiding crossovers to reduce fabrication complexity. Energy analysis using QCADesigner-E reveals 34.4 meV energy consumption, achieving 31% energy efficiency and 75% area efficiency in the context of QCA costs compared to recent designs. The proposed circuit highlights the unique potential of QCA as a scalable, energy-efficient solution for high-density next-generation computing systems. Full article

Cancers, particularly those resistant to treatment, stand as one of the most significant challenges in medicine. Frequently, available therapies need to be improved, underscoring the necessity for innovative treatment modalities. Over the years, there has been a resurgence of interest in natural plant substances, which have been traditionally overlooked as anticancer agents. A prime example of this is natural antioxidants, such as acteoside (ACT) and orientin (ORI), which offer novel approaches to cancer treatment, emphasizing liver cancer compared to other cancer types. They reduce oxidative stress by activating the Nrf2/ARE pathway and exhibit anticancer activity, e.g., decreasing Bcl-2 and Bcl-XL expression and increasing Bax levels. This review explores the individual effects of ACT and ORI and their synergistic interactions with sorafenib, temozolomide, 5-fluorouracil (for ACT), celecoxib, and curcumin (for ORI), highlighting their enhanced anticancer efficacy. In addition, ACT and ORI successfully integrate into various drug delivery systems (DDSs), including metal-containing carriers such as nanoparticles (NPs), nanoshells (NSs), quantum dots (QDs), and liposomes as representative examples of lipid-based drug delivery systems (LBDDSs). Advanced methods, including nanotechnology, offer potential solutions to low bioavailability, paving the way for the use of these substances in anticancer therapy. Full article

Quantum Dots (QDs) are small semiconductor nanoparticles (<10 nm) with strong, relatively stable, and tunable luminescent properties, which are increasingly applied in the sensing and detection of various analytes, including metal ions, biomarkers, explosives, proteins, RNA/DNA fragments, pesticides, drugs, and pollutants. In this review, we critically assess recent developments and advancements in luminescent QD-based sensors from an analytical perspective. We collected, tabulated, and analyzed relevant data reported in 124 peer-reviewed articles. The key analytical figures of merit, including the limit of detection (LOD), excitation and emission wavelengths, and size of the particles were extracted, tabulated, and analyzed with graphical representations. We calculated the geometric mean and median LODs from those tabulated publications. We found the following geometric mean LODs: 38 nM for QD-fluorescent-based sensors, 26 nM for QD-phosphorescent-based sensors, and an impressively low 0.109 pM for QD-chemiluminescent-based sensors, which demonstrate by far the best sensitivity in QD-based detection. Moreover, AI-based sensing methods, including the ATTBeadNet model, optimized principal component analysis(OPCA) model, and Support Vector Machine (SVM)-based system, were reviewed as they enhance the analytical performance of the detection. Despite these advances, there are still challenges that include improvements in recovery values, biocompatibility, stability, and overall performance. This review highlights trends to guide the future design of robust, high-performance, QD-based luminescent sensors. Full article

Zn-doped carbon dots (Zn@C-210 calcination temperature at 210 °C and Zn@C-260 calcination temperature at 260 °C) were synthesized via an in situ calcination method using zinc citrate complexes as precursors, aiming to investigate the mechanisms of their distinctive fluorescence properties. A range of analytical methods were employed to characterize these nanomaterials. The mechanism study revealed that the coordination structure of Zn-O, formed through zinc doping, can induce a metal–ligand charge-transfer effect, which significantly increases the probability of radiative transitions between the excited and ground states, thereby enhancing the fluorescence intensity. The Zn@C-210 in a solid state and Zn@C-260 in water exhibited approximately 71.50% and 21.1% quantum yields, respectively. Both Zn@C-210 and Zn@C-260 exhibited excitation-independent luminescence, featuring a long fluorescence lifetime of 6.5 μs for Zn@C-210 and 6.2 μs for Zn@C-260. Impressively, zinc-doped CDs displayed exceptional biosafety, showing no acute toxicity even at 1000 mg/kg doses. Zn@C-210 has excellent fluorescence in a solid state, showing promise in anti-photobleaching applications; meanwhile, the dual functionality of Zn@C-260 makes it useful as a folate sensor and cellular imaging probe. These findings not only advance the fundamental understanding of metal-doped carbon dot photophysics but also provide practical guidelines for developing targeted biomedical nanomaterials through rational surface engineering and doping strategies. Full article

Quantum dots (QDs) are nanoparticles with intrinsic fluorescence. Recent studies have found that metal-based QDs often impart toxic effects on the biological systems they interact with. Their undefined limitations have offset their potential for biomedical application. Our study aimed to address the research gap regarding QDs’ impacts on the intracellular actin cytoskeleton and the associated structures. Our XTT viability assays revealed that QDs only reduced viability in transformed human liver epithelial (THLE-2) cells, whereas HeLa cells remained viable after QD treatment. We also used confocal microscopy to evaluate the morphological changes in THLE-2 induced by QDs. We further investigated cell protrusion morphology using phalloidin-Alexa488 which selectively labels F-actin. The fluorescent microscopy of this phalloidin label revealed that QD treatment resulted in the redistribution of actin filaments within both THLE-2 and HeLa cells. We also report that the average number of focal adhesions decreased in QD-treated cells. As actin filaments at the cell are peripherally linked to the extracellular matrix via talin and integrin and are thus a crucial component of cell motility, we conducted a migration assay. The migration assay revealed that cell motility was significantly reduced in both THLE-2 and HeLa cells following QD treatment. Our findings establish that the internalization of QDs reduces cell motility by rearranging actin filaments. Full article

Carbon quantum dots (CQDs), with their excellent photoluminescence, tunable surface chemistry, and low toxicity, have emerged as versatile nanomaterials in sensing technologies. Meanwhile, metal–organic frameworks (MOFs) possess exceptionally porous architectures and extensive surface areas, and tunable functionalities ideal for molecular recognition and analyte enrichment. The synergistic integration of CQDs and MOFs has significantly expanded the potential of hybrid materials with enhanced selectivity, sensitivity, and multifunctionality. While several reviews have addressed QD/MOF systems broadly, this review offers a focused and updated perspective on CQDs@MOFs composites specifically tailored for food safety and environmental sensing applications. This review provides a comprehensive analysis of recent advances in the design, synthesis, and surface functionalization of these hybrids, emphasizing the mechanisms of interaction, photophysical behavior, and performance advantages over conventional sensors. Special attention is given to their use in detecting food contaminants such as heavy metals, pesticides, antibiotics, mycotoxins, pathogens, and aromatic compounds. Key strategies to enhance stability, selectivity, and detection limits are highlighted, and current challenges and future directions for practical deployment are critically discussed. Full article

Metal halide perovskite (MHP) nanocrystals (NCs) offer great potential for high-efficiency optoelectronic devices; however, they suffer from structural softness and chemical instability. Doping MHP NCs can overcome this issue. In this work, we synthesize Mn-doped methylammonium lead bromide (MAPbBr₃) NCs using the ligand-assisted reprecipitation method and investigate their structural and optical stability. X-ray diffraction confirms Mn²⁺ substitution at Pb²⁺ sites and lattice contraction. Photoluminescence (PL) measurements show a blue shift, significant PL quantum yield enhancement, reaching 72% at 17% Mn²⁺ doping, and a 34% increase compared to undoped samples, attributed to effective defect passivation and reduced non-radiative recombination, supported by time-resolved PL data. Mn²⁺ doping also improves long-term stability under ambient conditions. Low-temperature PL reveals the crystal-phase transitions of perovskite NCs and Mn-doped NCs to be somewhat different than those of pure MAPbBr₃. Mn²⁺ incorporation into perovskite promotes self-assembly into superlattices with larger crystal sizes, better structural order, and stronger inter-NC coupling. These results demonstrate that Mn²⁺ doping enhances both optical performance and structural robustness, advancing the potential of MAPbBr₃ NCs for stable optoelectronic applications. Full article

Traditional materials synthesis often involves energy-intensive processes with significant waste generation and limited control over material properties. This review examines synthetic biology as a sustainable alternative for designing advanced materials with enhanced precision and versatility. It explores microbial biomineralization, detailing how microorganisms influence the formation of mineral deposits and participate in key biogeochemical cycles. It highlights recent research advancements in using a wide variety of microorganisms for the synthesis of inorganic materials such as metal and metal oxide nanoparticles, quantum dots, magnetic nanoparticles, and thin films. The review also discusses the production and properties of various biopolymers. Important factors that can influence the size, morphology, and uniformity of these biomaterials are covered in detail. Emphasis is placed on advancements utilizing synthetic biology tools, such as protein engineering and genome editing, and recent research for creating smart and responsive materials. Considering the present limitations of synthetic biology, challenges related to scale-up, yield, and uniformity are discussed, and suggestions for future research are detailed. Full article

Ternary metal chalcogenide quantum dots (QDs), such as CuInS₂, have attracted significant attention due to their lower toxicity compared to binary counterparts containing cadmium or lead, making them promising candidates for biomedical imaging and solar energy applications. The surfactant choice is critical for controlling nanocrystal nucleation, growth kinetics, and functionalization. This directly affects the toxicity and applications of QDs. In this work, we report a synthesis protocol for PVP-capped CuInS₂ QDs in an aqueous solution. Using density functional theory (DFT) calculations, we predicted the coordination patterns of PVP on the CuInS₂ QDs surface, providing insights into the stabilization mechanism. The synthesized QDs were characterized using TEM, XRD, XPS, and FTIR to assess their morphology, chemical composition, and surface chemistry. The QDs exhibited dual photoluminescence (PL) maxima at 550 nm and 680 nm, attributed to defect-related emissions, making them suitable for cell imaging applications. Cytotoxicity studies and cell imaging experiments demonstrate the excellent biocompatibility and effective staining capabilities of the PVP-capped CuInS₂ QDs, highlighting their potential as fluorescent probes for long-term, multicolor cell imaging including two-photon microscopy. Full article

Si-based photonics has garnered considerable attention as a future device for complementary metal–oxide–semiconductor (CMOS) computing. However, few studies have investigated Si-based light sources highly compatible with Si ultra large-scale integration processing. In this study, we observed stable light emission at room temperature from superatom-like β–FeSi₂–core/Si–shell quantum dots (QDs). The β–FeSi₂–core/Si–shell QDs, with an areal density as high as ~10¹¹ cm⁻² were fabricated by self-aligned silicide process of Fe–silicide capped Si–QDs on ~3.0 nm SiO₂/n–Si (100) substrates, followed by SiH₄ exposure at 400 °C. From the room temperature photoluminescence characteristics, β–FeSi₂ core/Si–shell QDs can be regarded as active elements in optical applications because they offer the advantages of photonic signal processing capabilities and can be combined with electronic logic control and data storage. Full article

Background: Nanomaterial-based biosensors represent a transformative advancement in oral health diagnostics and therapeutics, offering superior sensitivity and selectivity for early disease detection compared to conventional methods. Their applications span prosthetic dentistry, where they enable the precise monitoring of dental implants, and theranostics for conditions such as dental caries, oral cancers, and periodontal diseases. These innovations promise to enhance proactive oral healthcare by integrating detection, treatment, and preventive strategies. Objectives: This review comprehensively examines the role of nanomaterial-based biosensors in dental theranostics, with a focus on prosthetic applications. It emphasizes their utility in dental implant surveillance, the early identification of prosthesis-related complications, and their broader implications for personalized treatment paradigms. Methods: A systematic literature search was conducted across PubMed, Scopus, and Web of Science for studies published between 2010 and early 2025. Keywords included combinations of “nanomaterials”, “biosensors”, “dentistry”, “oral health”, “diagnostics”, “therapeutics”, and “theranostics”. Articles were selected based on their relevance to nanomaterial applications in dental biosensors and their clinical translation. Results: The review identified diverse classes of nanomaterials—such as metallic nanoparticles, carbon-based structures, and quantum dots—whose unique physicochemical properties enhance biosensor performance. Key advancements include the ultra-sensitive detection of biomarkers in saliva and gingival crevicular fluid, the real-time monitoring of peri-implant inflammatory markers, and cost-effective diagnostic platforms. These systems demonstrate exceptional precision in detecting early-stage pathologies while improving operational efficiency in clinical settings. Conclusions: Nanomaterial-based biosensors hold significant promise for revolutionizing dental care through real-time implant monitoring and early complication detection. Despite challenges related to biocompatibility, scalable manufacturing, and rigorous clinical validation, these technologies may redefine oral healthcare by extending prosthetic device longevity, enabling personalized interventions, and reducing long-term treatment costs. Future research must address translational barriers to fully harness their potential in improving diagnostic accuracy and therapeutic outcomes. Full article

Wastewater management has a direct impact on the supply of drinking water. New cutting-edge technologies are crucial to the ever-growing demand for tailored solutions for pollutant removal, but these pollutants first need to be detected. Traditional techniques are costly and are no longer competitive in the wastewater cleaning market. One sustainable and economically viable alternative is the fabrication of integrated nanosensors composed of conducting polymers. These include polyaniline doped with various types of nanomaterials such as nanocarbons (carbon nanotubes and graphene), metal oxide nanoparticles/nanostructures, and quantum dots. The synergistic properties of these components can endow sensing materials with enhanced surface reactivity, greater electrocatalytic activity, as well as tunable redox activity and electrical conductivity. This review covers key recent advances in the field of non-enzyme electrochemical conductive polymer nanosensors for pollutant detection in aqueous environments or simulated polluted samples. It provides an introduction to these sensors, their preparation, applications, the environmental and economic hurdles impeding the large-scale development of PANI-based nanomaterials in sensing applications, and future directions for research and real-world applications. Full article