Search Results (751)

The ${\gamma }^{\prime }$-Fe₄N system has a high technological relevance due to its multiple applications in the field of surface treatment against wear and corrosion of iron in steel parts, as well as in the manufacturing of high-density magnetic recording devices, and so on. In the present work, we present a wide research of the structural, elastic, magnetic, vibrational, and thermophysical properties by means of the phonon analysis. For these purposes, we have compared theoretical and experimental results. The theoretical data were obtained by employing ab initio electronic structure calculations in the framework of density functional theory (DFT), and different experimental measurements, such as X-ray diffraction, magnetization measurements, and calorimetric techniques, were used to characterize the ${\gamma }^{\prime }$-Fe₄N system. The resulting comparison showed an excellent agreement between the theoretical and experimental data reported. Full article

The present study provides a detailed compilation and analysis of the bulk density and magnetic susceptibility of the rocks from the northwest Himalayas, Pakistan. The area is tectonically extremely complex and comprises sedimentary, metamorphic, and igneous rocks. These rocks range in age from Early Proterozoic to Recent. During the fieldwork, 476 rock samples were collected for density measurements and 410 for magnetic susceptibility measurements from the major rock units exposed in the study area. The measured physical parameters reveal a significant difference in the density and susceptibility of the rocks present in the investigated area. The sedimentary rock units belonging to the Indian Plate show the lowest mean values for bulk density, followed by metasedimentary rocks, Early Proterozoic rocks, igneous and metaigneous rock units of the Indian Plate, Indus Suture Melange Zone, and Kohistan Island Arc rocks, respectively. The magnetic susceptibility of sedimentary rock units of the Indian Plate has the lowest mean values, followed by metasedimentary rocks of the Indian Plate, igneous and metaigneous rock units of the Indian Plate, Early Proterozoic rocks of the Indian Plate, Kohistan Island Arc rocks, and Indus Suture Melange Zone. In brief, the sedimentary rocks of the Indian Plate have the lowest bulk density and magnetic susceptibility values, whereas the Kohistan Island Arc rocks have the highest values. Overall, the bulk density and magnetic susceptibility of rock units in the study area follow those predicted for different types of rocks. These measurements can be used to develop possible potential field models of the northwest Himalayas to better understand the tectonics of the ongoing continental-to-continental collision, as well as for many other geological analyses. Full article

We present an alternative to the classical SQUID magnetometric measurements for the First-Order Reversal Curve (FORC) diagram approach by employing differential scanning calorimetry (DSC) experiments. After discussing the main results, the advantages and limitations of the magnetometric FORCs, we introduce the calorimetric method. We argue that, while the results are comparable to those obtained via magnetometry, the calorimetric method not only significantly simplifies the required mathematical computations but also detects subtle or overlapping phase transitions that might be hard to distinguish magnetically. The methodology is illustrated through both experimental data and mean-field simulations. Full article

Background and Objectives: Dental adhesives augmented with magnetic nanoparticles (MNPs) have been proposed to prevent microleakages. MNPs dispersed in a dental adhesive reduce the thickness of the adhesive layer applied in a magnetic field and enhance the bond strength by favoring the penetration of the adhesive into dentinal tubules. However, the restoration’s color has been found to be affected by the MNPs. This study tests the hypothesis that MNP coating can alleviate the esthetic impact of magnetic dental adhesives. Materials and Methods: We synthesized Fe₃O₄ MNPs with silica coating (MNPs-SiO₂), calcium-based coating (MNPs-Ca), and no coating. Their morphology was studied using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Their chemical composition was assessed by energy-dispersive X-ray spectroscopy (EDX), and magnetic properties were measured using a vibrating sample magnetometer. FTIR spectroscopy was used to evaluate the polymerization of the MNP-laden adhesive. We prepared cavities in molar phantoms divided in four groups (n = 15 each) restored using the same adhesive with different MNP contents: Group 0 (G0)—no MNPs, G1—MNPs-SiO₂, G2—MNPs-Ca, and G3—uncoated MNPs. The restoration’s color was quantified in the CIELAB color space using a dental spectrophotometer. Results: MNPs-SiO₂ were globular, whereas MNPs-Ca had a cubic morphology. The SiO₂ layer was 73.1 nm ± 9.9 nm thick; the Ca(OH)₂ layer was 19.97 nm ± 2.27 nm thick. The saturation magnetization was 18.6 emu/g for MNPs-SiO₂, 1.0 emu/g for MNPs-Ca, and 65.7 emu/g for uncoated MNPs. MNPs had a marginal effect on the adhesive’s photopolymerization. The mean color difference between G0 and G2 was close to the 50:50% acceptability threshold, whereas the other groups were far apart from G0. The mean whiteness index of G2 did not differ significantly from that of G0; G1 deviated marginally from G0, whereas G3 differed significantly from G0. Conclusions: These results suggest that MNP coating can mitigate the influence of MNP-laden dental adhesives on the color of restorations. Full article

Electromagnetic articulography is a technique developed for recording three-dimensional movements. It is based on magnetic induction, where small currents are induced in miniature receiver coils acting as motion sensors by means of electromagnetic fields generated by transmitter coils. This technology has been applied in dental research to record mandibular movements during mastication, Posselt’s envelope of motion, and micromovements of dental prostheses. The AG501 electromagnetic articulograph (Carstens Medizinelektronik GmbH, Bovenden, Germany) provides a Head Correction (HC) procedure to eliminate head movement, which requires the reference sensors to be firmly attached to the subject’s head. If the sensors shift during the recordings, it becomes necessary to reposition them and repeat the head correction procedure. The aim of this study was to develop a 3D-printed helmet to securely fix the reference sensors to the head of a subject in the context of performing a series of recordings involving the mastication of 36 foods and the execution of Posselt’s envelope of motion. The number of HCs required was recorded for a group using the helmet and for a control group in which the sensors were attached to the subject’s head using tissue adhesive. A total of 29 recordings were conducted with and without the helmet. Without the helmet 44 HCs were required; on the other hand, with the helmet 36 HCs were required. On average, 1.5 HCs were required per session without the helmet and 1.2 HCs with the helmet, showing a non-significant difference (p < 0.05). A reduction in the number of HCs required per session was observed. However, more than one HC was still needed to complete a session. This could be addressed in future research by designing a series of helmets that adapt to different head sizes. Full article

A cochlear implant (CI) system holds two spiral coils, one external and one implanted. These coils are used to transmit both data and power. A magnet at the center of the coils ensures proper alignment to assure the highest coupling. However, when the recipient needs a magnetic resonance imaging (MRI) scan, this magnet can cause problems due to the high magnetic field of such a scan. Therefore, a new type of implant without magnets would be beneficial and even supersede the current state of the art of hearing implants. To examine the feasibility of magnet-free cochlear implants, this research studies the impact of coil misalignment on the inductive coupling between the coils and thus the power and data transfer. Rather than using time-consuming finite element analysis (FEA), MATLAB is used to examine the impact of lateral, vertical and angular misalignment on the coupling coefficient using derivations of Neumann’s equation. The MATLAB model is verified with FEA software with a median 8% relative error on the coupling coefficient for various misalignments, ensuring that it can be used to study the feasibility of various magnet-free implants and wireless power and data transmission systems in general. In the case of cochlear implants, the results show that by taking patient and technology constraints like skinflap thickness and mechanical design dimensions into account, the mean error can even be reduced to below 5% and magnet-free cochlear implants can be feasible. Full article

With the digital transformation of power systems, higher demands are being placed on smart grids for the timely and precise acquisition of the status of transmission and transformation equipment during operational and maintenance processes. When a transformer is energized under no-load conditions, an excitation inrush phenomenon occurs in the windings, posing a hazard to the stable operation of the power system. A machine learning approach is proposed in this paper for predicting the internal magnetic field of transformers under excitation inrush condition, enabling the monitoring of transformer operation status. Experimental results indicate that the mean absolute percentage error (MAPE) for predicting the transformer’s magnetic field using the deep neural network (DNN) model is 4.02%. The average time to obtain a single magnetic field data prediction is 0.41 s, which is 46.68 times faster than traditional finite element analysis (FEA) method, validating the effectiveness of machine learning for magnetic field prediction. Full article

This study presents the design and development of electromagnetic dipole magnets for use as beam dumps and spectrometers in the MIR and THz free-electron laser (FEL) beamlines at the PBP-CMU Electron Linac Laboratory (PCELL). The magnets were optimized to achieve a 60-degree bending angle for electron beams with energies up to 30 MeV, without requiring water cooling. Using CST EM Studio for 3D magnetic field simulations and ASTRA for particle tracking, the THz dipole (with 414 turns) and MIR dipole (with 600 turns) generated magnetic fields of 0.1739 T and 0.2588 T, respectively, while both operating at currents below 10 A. Performance analysis confirmed effective beam deflection, with the THz dipole showing that it was capable of handling beam energies up to 20 MeV and the MIR dipole could handle up to 30 MeV. The energy measurement at the spectrometer screen position was simulated, taking into account transverse beam size, fringe fields, and space charge effects, using ASTRA. The energy resolution, defined as the ratio of energy uncertainty to the mean energy, was evaluated for selected cases. For beam energies of 16 MeV and 25 MeV, resolutions of 0.2% and 0.5% were achieved with transverse beam sizes of 1 mm and 4 mm, respectively. All evaluated cases maintained energy resolutions below 1%, confirming the spectrometer’s suitability for high-precision beam diagnostics. Furthermore, the relationship between the initial and measured energy spread errors, taking into account a camera resolution of 0.1 mm/pixel, was evaluated. Simulations across various beam energies (10–16 MeV for the THz dipole and 20–25 MeV for the MIR dipole) confirmed that the measurement error in energy spread decreases with smaller RMS transverse beam sizes. This trend was consistent across all tested energies and magnet configurations. To ensure accurate energy spread measurements, a small initial beam size is recommended. Specifically, for beams with a narrow initial energy spread, a transverse beam size below 1 mm is essential. Full article

Background/Objectives: Assessment of the hemodynamic status of the brain in patients with cerebrovascular diseases is crucial for providing valuable clinical information. Various magnetic resonance perfusion sequences are used in studies, and one of the current challenges is comparing methods utilizing exogenous and endogenous contrast. This meta-analysis aimed to evaluate the correlation between arterial spin labeling (ASL)-derived perfusion parameters and those obtained by dynamic susceptibility contrast (DSC) perfusion in stroke and steno-occlusive diseases. Methods: A systematic review and meta-analysis were conducted, including 14 studies that reported correlation coefficients between perfusion MRI sequences in the assessment of stroke or steno-occlusive diseases. The correlation between ASL-derived cerebral blood flow (ASL-CBF) and DSC-derived cerebral blood flow (DSC-CBF) was analyzed, considering different magnetic field strengths (1.5 T and 3.0 T), sequence types, and brain regions. Additionally, real and normalized data were compared. Results: A moderate positive correlation was found between ASL-CBF and DSC-CBF (R = 0.464). Subgroup analysis demonstrated that ASL-CBF and DSC-CBF correlated at 3.0 T (R = 0.401) and 1.5 T (R = 0.700). No significant differences were observed in correlation coefficients based on sequence type or brain region. Normalized data demonstrated a higher correlation coefficient compared to real data (Rreal = 0.393, Rnorm = 0.496). Additionally, the correlation coefficient between ASL-CBF and DSC-derived mean transit time (DSC-MTT) for all included studies was R = −0.422. Conclusions: ASL-derived perfusion parameters demonstrate moderate-to-high agreement with DSC perfusion parameters in stroke and steno-occlusive patients. These findings support the potential utility of ASL as a non-invasive alternative to DSC perfusion imaging in clinical and research settings. Full article

Background: The main mechanism of optic nerve damage in patients with pituitary adenoma (PA) is the pressure of optic chiasm. The retinal nerve fiber layer (RNFL), the ganglion cell layer (GCL)+, and GCL++ thickness measurement by optical coherence tomography (OCT), visual function evaluation, and magnetic resonance imaging (MRI) can be used to predict visual function recovery. In our study, we investigated the associations between visual acuity (VA), visual field (VF), RNFL, GCL changes, and the findings of MRI in patients with PA. Methods: This study was conducted in the Departments of Ophthalmology and Neurosurgery of the Lithuanian University of Health Sciences Hospital. A total of 25 patients diagnosed with PA were included in the study group, and 27 healthy subjects were included in the control group. The thickness of the RNFL and ganglion cell layer (GCL+, GCL++) and optic nerve disc diameter was analysed with OCT. Moreover, an MRI was performed for patients with PA. Results: The RNFL thickness around the optic disk measured preoperatively was reduced significantly in the temporal quadrant in PA patients compared with the control group (median (min; max); mean rank: 73.5 (52; 109); 58.39 vs. 69.5 (16; 168); 46.14; p = 0.038). We found that it was reduced significantly only in the inferior quadrant of the macro-PA group compared to the micro-PA group (median (min; max); mean rank: 99.5 (61; 115); 21.07 vs. 106.5 (90; 121); 32.15), p = 0.008, respectively). The RNFL thickness was reduced significantly only in the inferior quadrant of the non-active PA group compared to the active PA group (median (min; max); mean rank: 118.5 (49; 144); 17.42 vs. 130.5 (77; 156); 28.05), p = 0.028, respectively). RNFL thickness was reduced significantly only in the temporal quadrant in the PA with suprasellar extension group compared to the PA without suprasellar extension group (median (min; max); mean rank: 67.5 (16; 99); 21.66 vs. 72 (58; 168); 30.39), p = 0.036, respectively). Furthermore, GCL++ thickness was reduced significantly in total and in superior and inferior sectors of the PA with suprasellar extension group compared to the PA without suprasellar extension group (median (min; max); mean rank: 98.5 (57; 113); 21.8; 101 (61; 121); 21.48 and 102.5 (59; 116); 21.71 vs. 103.5 (95; 115); 30.2; 106.5 (90; 115); 30.61 and 104.5 (95; 113); 30.32), p = 0.043; p = 0.028 and p = 0.038, respectively). In the control group, significant positive correlations were found between optic disc area and the total RNFL thickness (r = 0.440, p < 0.001). In the PA group, significant correlations were observed between optic rim area and total RNFL thickness (r = 0.493, p < 0.001) and all quadrants, with the strongest in the nasal quadrant (r = 0.503, p < 0.001). A moderate to strong negative correlation was found between visual field (VF) defects and RNFL thickness, with the strongest correlation observed in the superior quadrant. Conclusions: OCT offers a detailed insight into the microscopic structural and functional changes throughout the entire visual pathway in patients with PA. Our findings demonstrate a significant negative correlation between RNFL thickness and visual field defects, highlighting the clinical relevance of OCT measurements in visual function assessment. Moreover, the results suggest that optic rim area may be a more reliable indicator of RNFL thickness variations than optic disc area in patients with PA. Full article

Touch is a crucial sense for advanced organisms, particularly humans, as it provides essential information about the shape, size, and texture of contacting objects. In robotics and automation, the integration of tactile sensors has become increasingly relevant, enabling devices to properly interact with their environment. This study aimed to develop a biomimetic, skin-inspired tactile sensor device capable of sensing applied force, characterizing it in three dimensions, and determining the point of application. The device was designed as a 4 × 4 matrix of tunneling magnetoresistive sensors, which provide a higher sensitivity in comparison to the ones based on the Hall effect, the current standard in tactile sensors. These detect magnetic field changes along a single axis, wire-bonded to a PCB and encapsulated in epoxy. This sensing array detects the magnetic field from an overlayed magnetorheological elastomer composed of Ecoflex and 5 µm neodymium–iron–boron ferromagnetic particles. Structural integrity tests showed that the device could withstand forces above 100 N, with an epoxy coverage of 0.12 mL per sensor chip. A 3D movement stage equipped with an indenting tip and force sensor was used to collect device data, which was then used to train neural network models to predict the contact location and 3D magnitude of the applied force. The magnitude-sensing model was trained on 31,260 data points, being able to accurately characterize force with a mean absolute error ranging between 0.07 and 0.17 N. The spatial sensitivity model was trained on 171,008 points and achieved a mean absolute error of 0.26 mm when predicting the location of applied force within a sensitive area of 25.5 mm × 25.5 mm using sensors spaced 4.5 mm apart. For points outside the testing range, the mean absolute error was 0.63 mm. Full article

Using the results of numerical simulations and astrophysical observations (mainly in the WMAP and Planck frequency bands), it is shown that Galactic foreground emission becomes more sensitive to the mean magnetic field with the frequency, resulting in the appearance of two levels of its randomization due to the chaotic/turbulent dynamics of a magnetized interstellar medium dominated by magnetic helicity. The galactic foreground emission is more randomized at higher frequencies. The Galactic synchrotron and polarized dust emissions have been studied in detail. It is shown that the magnetic field imposes its level of randomization on the synchrotron and dust emission. The main method for the theoretical consideration used in this study is the Kolmogorov–Iroshnikov phenomenology in the frames of distributed chaos notion. Despite the vast differences in the values of physical parameters and spatio-temporal scales between the numerical simulations and the astrophysical observations, there is a quantitative agreement between the results of the astrophysical observations and the numerical simulations in the frames of the distributed chaos notion. Full article

We investigate the asymmetry in the mean free path of massive neutrinos propagating through hot neutron matter under strong magnetic fields. The system is studied at temperatures up to 30 MeV and baryon densities up to ρ/ρ₀ = 2.5, where ρ₀ is the nuclear saturation density. Magnetic field strengths up to B = 10¹⁸ G are considered. We analyze three different equations of state: one corresponding to a non-interacting Fermi gas and two derived from Skyrme-type interactions. The impact of a finite neutrino mass is assessed and found to be negligible within the energy range considered. The neutrino mean free path is computed for various angles of incidence with respect to the magnetic field direction, revealing a clear angular asymmetry. We show that quantum interference terms contribute significantly to this asymmetry, enhancing neutrino emission in directions perpendicular to the magnetic field at high densities. This result contrasts with previous expectations and suggests a revised interpretation of neutrino transport in magnetized nuclear matter. Full article

This paper presents a comprehensive analytical framework for investigating loss mechanisms and thermal behavior in high-speed magnetic field-modulated motors for flywheel energy storage systems. Through systematic classification of electromagnetic, mechanical, and additional losses, we reveal that modulator components constitute approximately 45% of total system losses at rated speed. Finite element analysis demonstrates significant spatial non-uniformity in loss distribution, with peak loss densities of 5.5 × 10⁵ W/m³ occurring in the modulator region, while end-region losses exceed central-region values by 42% due to three-dimensional field effects. Our optimized design, implementing composite rotor structures, dual-material permanent magnets, and integrated thermal management solutions, achieves a 43.2% reduction in total electromagnetic losses, with permanent magnet eddy current losses decreasing by 68.7%. The maximum temperature hotspots decrease from 143 °C to 98 °C under identical operating conditions, with temperature gradients reduced by 58%. Peak efficiency increases from 92.3% to 95.8%, with the η > 90% region expanding by 42% in the speed–torque plane. Experimental validation confirms model accuracy with mean absolute percentage errors below 4.2%. The optimized design demonstrates 24.8% faster response times during charging transients while maintaining 41.7% smaller speed oscillations during sudden load changes. These quantitative improvements address critical limitations in existing systems, providing a viable pathway toward high-reliability, grid-scale energy storage solutions with extended operational lifetimes and improved round-trip efficiency. Full article

The contact process is a nonequilibrium Hamiltonian model that, even in one dimension, lacks an exact solution and has been extensively studied via Monte Carlo simulations, both in steady-state and time-dependent scenarios. Although the effects of particle mobility and diffusion on criticality have been preliminarily explored, they remain poorly understood in many aspects. In this work, we examine how the critical rate of the model varies with the probability of particle mobility. By analyzing different stochastic evolutions of the system, we employ two modern approaches: (1) Random Matrix Theory (RMT): By building on the success of RMT, particularly Wishart-like matrices, in studying statistical physics of systems with up-down symmetry via magnetization dynamics [R. da Silva, IJMPC 2022], we demonstrate its applicability to models with an absorbing state; (2) Optimized Temporal Power Laws: By using short-time dynamics, we optimize power laws derived from ensemble-averaged evolutions of the system. Both methods consistently reveal that the critical rate decays with mobility according to a simple Belehradek function. Additionally, a straightforward mean-field analysis supports the decay of the critical parameter with mobility, although it predicts a simpler linear dependence. We also demonstrate that the more sophisticated pair approximation mean-field model developed by ben-Avraham and Köhler aligns closely with the Belehradek function, precisely matching our lattice simulation results. Full article