Search Results (376)

Transition-metal and rare-earth element co-doped ZnO nanoparticles have attracted significant attention due to their potential applications in spintronics and optoelectronics. In this study, Zn_0.95Co_0.01EuxO (x = 0.01–0.05) nanoparticles were synthesized using the sol–gel technique. The estimated stress, strain, and crystallite sizes of the synthesized Co/Eu co-doped ZnO nanoparticles were calculated using the Williamson–Hall method, and their electron spin resonance (ESR) properties were investigated to examine the effect on their magnetic and structural properties. X-ray diffraction (XRD) analysis confirmed the presence of a single-phase structure. Surface morphology, elemental composition, crystal quality, defect types, density, and magnetic behavior were characterized using scanning electron microscope (SEM), electron-dispersive spectroscopy (EDS), and ESR techniques, respectively. The effect of Eu concentration on the linewidth (ΔBpp) and g-factor in the ESR spectra was studied. By correlating ESR results with the obtained structural properties, room-temperature ferromagnetic behavior was identified. Full article

Magnetotactic bacteria (MTB), a unique group of Gram-negative prokaryotes, have the remarkable ability to biomineralize magnetic nanoparticles (MNPs) intracellularly, making them promising candidates for various biomedical applications such as biosensors, drug delivery, imaging contrast agents, and cancer-targeted therapies. To fully exploit the potential of MTB, a precise understanding of the structural, surface, and functional properties of these biologically produced nanoparticles is required. Given these concerns, this review provides a focused synthesis of the most widely used microscopic and spectroscopic methods applied in the characterization of MTB and their associated MNPs, covering the latest research from January 2022 to May 2025. Specifically, various optical microscopy techniques (e.g., transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM)) and spectroscopic approaches (e.g., localized surface plasmon resonance (LSPR), surface-enhanced Raman scattering (SERS), and X-ray photoelectron spectroscopy (XPS)) relevant to ultrasensitive MTB biosensor development are herein discussed and compared in term of their advantages and disadvantages. Overall, the novelty of this work lies in its clarity and structure, aiming to consolidate and simplify access to the most current and effective characterization techniques. Furthermore, several gaps in the characterization methods of MTB were identified, and new directions of methods that can be integrated into the study, analysis, and characterization of these bacteria are suggested in exhaustive manner. Finally, to the authors’ knowledge, this is the first comprehensive overview of characterization techniques that could serve as a practical resource for both younger and more experienced researchers seeking to optimize the use of MTB in the development of advanced biosensing systems and other biomedical tools. Full article

To address the growing demand for environmentally friendly flexible sensors, here, a composite hydrogel of nanocellulose (NC) and polyvinyl alcohol (PVA) was designed and fabricated using Camellia oleifera shells as a sustainable alternative to petroleum-based raw materials. Firstly, NC was extracted from Camellia oleifera shells and modified with 2-chloropropyl chloride to obtain a nanocellulose-based initiator (Init-NC) for atomic transfer radical polymerization (ATRP). Subsequently, sulfonyl betaine methacrylate (SBMA) was polymerized by Init-NC initiating to yield zwitterion-functionalized nanocellulose (NC-PSBMA). Finally, the NC-PSBMA/PVA hydrogel was fabricated by blending NC-PSBMA with PVA. A Fourier transform infrared spectrometer (FT-IR), proton nuclear magnetic resonance spectrometer (¹H-NMR), X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), universal mechanical testing machine, and digital source-meter were used to characterize the chemical structure, surface microstructure, and sensing performance. The results indicated that: (1) FT-IR and ¹H NMR confirmed the successful synthesis of NC-PSBMA; (2) SEM, TEM, and alternating current (AC) impedance spectroscopy verified that the NC-PSBMA/PVA hydrogel exhibits a uniform porous structure (pore diameter was 1.1737 μm), resulting in significantly better porosity (15.75%) and ionic conductivity (2.652 S·m⁻¹) compared to the pure PVA hydrogel; and (3) mechanical testing combined with source meter testing showed that the tensile strength of the composite hydrogel increased by 6.4 times compared to the pure PVA hydrogel; meanwhile, it showed a high sensitivity (GF = 1.40, strain range 0–5%; GF = 1.67, strain range 5–20%) and rapid response time (<0.05 s). This study presents a novel approach to developing bio-based, flexible sensing materials. Full article

Nine chaetoglobosins (1–9) including five previously undescribed ones (1–5) were obtained from the culture broth of an endophytic fungus (Chaetomium sp. UJN-EF006) isolated from the leaves of Vaccinium bracteatum. The structures of these fungal metabolites were elucidated by spectroscopic methods including mass spectroscopy, nuclear magnetic resonance, single crystal X-ray crystallography, and electronic circular dichroism. To accelerate the development of novel fungicides, all of the isolated chaetoglobosins were evaluated for their antifungal activity against two crop pathogens, Botrytis cinerea and Sclerotinia sclerotiorum. The assay results revealed that chaetoglobosins 2, 6, 7, and 9 possessed a significant fungicidal effect against B. cinerea, with EC₅₀ values all below 10 μg/mL. Particularly, the most potent compound, 7, was 175- and 96-fold as active as the commercially available fungicides carbendazim (EC₅₀ 70.11 μg/mL) and azoxystrobin (EC₅₀ 39.02 μg/mL), respectively. A further observation under scanning electron microscope indicated that compound 2 could markedly impair the fungal hyphae of B. cinerea. The study demonstrates that the chaetoglobosins had excellent in vitro antifungal activities against B. cinerea. Full article

Microscopic pore–throat structures, known for their complexity and heterogeneity, significantly influence the characteristics of tight sandstone reservoirs. Despite the advances in geological research, studies leveraging fractal theory to elucidate differences across pore scales are limited, and conventional testing methods often fail to effectively characterize these complex structures. This gap poses substantial challenges for the exploration and evaluation of tight oil reservoirs, highlighting the need for refined analytical approaches. This study addresses these challenges by applying fractal analysis to the pore–throat structures of the Triassic Yanchang Formation tight sandstones in the Wuqi Area of the Ordos Basin. Employing a combination of experimental techniques—including pore-casted thin sections, scanning electron microscopy, high-pressure mercury intrusion, constant-rate mercury intrusion, and nuclear magnetic resonance (NMR)—this study analyzes the fractal dimensions of pore–throats. Findings reveal that tight sandstone reservoirs are predominantly composed of micron-scale pore–throats, displaying complex configurations and pronounced heterogeneity. Fractal curves feature distinct inflection points, effectively categorizing the pore–throats into large and small scales based on their mercury intrusion pressures. By linearly fitting slopes of fractal curves, we calculate variable fractal dimensions across these scales. Notably, NMR-derived fractal dimensions exhibit a two-segment distribution; smaller-scale pore–throats show less heterogeneity and spatial deformation, resulting in lower fractal dimensions, while larger-scale pore–throats, associated with extensive storage capacity and significant deformation, display higher fractal dimensions. Full article

Polymeric nanoparticles based on poly(ethyl cyanoacrylate) (PECA) and poly(ε-caprolactone) (PCL) were synthesized via semicontinuous microemulsion polymerization for potential biomedical applications. A systematic evaluation of four surfactants (Tween 80, Alkonat L70, Genapol LRO, and Brij-20) was carried out to determine their effects on micelle formation and particle size. Brij-20 enabled the formation of nanoparticles under 100 nm, with optimal conditions identified at 4% surfactant concentration and pH 1.75. The polymerization process included acid-catalyzed ring-opening of ε-caprolactone, followed by the semicontinuous addition of ethyl-2-cyanoacrylate under an inert atmosphere. Copolymerization was confirmed through FT-IR spectroscopy, nuclear magnetic resonance (NMR) spectroscopy, and differential scanning calorimetry, revealing a glass transition temperature (T_g) of 110.9 °C, indicating PECA as the dominant phase. Thermogravimetric analysis showed two decomposition events corresponding to each polymer. Transmission electron microscope analysis revealed nanoparticles averaging 51.74 nm in diameter. These findings demonstrate the feasibility of producing PECA-PCL nanoparticles with controlled size and composition, suitable for drug delivery and other biomedical uses. Full article

High oil content in breaded fried small yellow croaker (BFYC) was reduced using composite batter gels consisting of tapioca starch, wheat flour, and different concentrations of cassia gum (CG; 0%, 0.2%, 0.4%, 0.6%, 0.8%, 1%). The effects of CG on the oil absorption capacity of BFYC and potential mechanisms were investigated. Dynamic rheological analysis revealed that CG addition could enhance the viscoelasticity of the batter by increasing its storage modulus and loss modulus. Furthermore, FTIR and X-ray diffraction results demonstrated that CG interacts with starch through noncovalent interactions, increasing the relative crystallinity from 9.29% to 16.49%, which promoted the formation of a gel layer. This structural improvement effectively inhibited oil absorption. Differential scanning calorimetry analysis showed that within the 0–0.8% CG range, the batter’s denaturation temperature increased from 78.23 °C to 82.08 °C with higher CG concentrations, indicating prolonged gelatinization and enhanced thermal stability that further reduced oil penetration. Low-field nuclear magnetic resonance analysis revealed that CG increased the proportion of tightly bound and weakly bound water in the batter, thereby improving water retention capacity and reducing moisture loss during frying. Microscopic structural observations and Sudan Red-staining tests confirmed that at 0.8% CG concentration, the crust exhibited the lowest porosity with approximately 40% reduction in surface fat content compared to the control group. In conclusion, CG addition significantly improves batter properties and reduces oil content in fried products, providing theoretical support for the development of low-fat fried foods. Full article

This study investigates the microscopic structural changes and the evolution of physical properties in typical shale samples from three wells in southwestern China during water–rock interactions. Using scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), and other techniques, we analyzed the changes in pore structure, mineral dissolution behavior, and fracture propagation in shale samples of different types (organic-rich, mixed, and inorganic) during water immersion. The results show that water–rock interaction significantly affects the porosity, fracture width, and physical properties of shale. As the reaction time increases, the pore volume and number of pores generally increase in all shale types, with significant fracture propagation. Furthermore, fracture width changes exhibit varying trends depending on the reaction depth. NMR T2 spectrum analysis indicates that water–rock interaction not only influences the expansion of microfractures but also shows different responses in organic and inorganic pores. SEM images further reveal the impact of water–rock interaction on mineral dissolution, particularly during the early stages, where the dissolution of minerals significantly alters the pore structure. Overall, water–rock interaction plays a crucial role in the development of shale gas reservoirs, providing valuable data and theoretical support for future shale gas extraction. Full article

Pore structure plays a critical role in evaluating shale “sweet spots”. Compared to marine shale, lacustrine shale has more diverse lithofacies types and greater heterogeneity in pore structure due to frequently changing environmental conditions. Using methods such as mercury intrusion porosimetry (MIP), field emission scanning electron microscopy (FE-SEM), nuclear magnetic resonance (NMR), and X-ray diffraction (XRD), this study investigates the micropore structures and heterogeneity of different lithofacies in the Jurassic Dongyuemiao Member lacustrine shale. Image processing and multifractal theory were employed to identify the controlling factors of pore structure heterogeneity. The key findings are as follows. (1) Based on mineral content and laminae types, the lithofacies types of Dongyuemiao lacustrine shale are classified into four types: shell–laminae mixed shale (SLMS), silty–laminae clay shale (SLCS), clast–laminae clay shale (CLCS), and clay shale (CS). (2) Based on genesis, shale reservoirs’ pore and permeability space are categorized into inorganic pores, organic pores, and micro-fractures. Inorganic pores consist of inter-particle pores and intra-particle pores. Pore size distribution curves for all four lithofacies exhibit two main peaks, with pore sizes concentrated in the ranges of 2–10 nm and 50–80 nm. Mesopores and macropores dominate, accounting for over 80% of the total pore volume. Mesopores are most developed in CLCS, representing 56.3%. (3) Quartz content is positively correlated with the multifractal dimension, while clay content shows a negative correlation. Higher quartz content, coupled with lower clay content, weakens pore structure heterogeneity. A negative correlation exists between total organic carbon (TOC) and the multifractal dimension, indicating that higher organic matter content enhances organic pore development and increases microscopic heterogeneity. (4) Porosity heterogeneity in SLMS is effectively characterized by D₀-D_max, while in the other three lithofacies, it is characterized by D_min-D₀. Permeability across all lithofacies correlates with D₀-D_max. In CS, SLMS, and SLCS, permeability is positively correlated with D₀-D_max, with higher values indicating greater permeability heterogeneity. In CLCS, permeability is negatively correlated with D₀-D_max, such that lower values reflect stronger heterogeneity. Full article

The pore structure of reservoir rocks was a crucial factor affecting hydrocarbon production. Accurately characterized the micropore structure of different types of rock reservoirs was of great significance for unconventional natural gas exploration. In this study, multiple observation methods (field emission scanning electron microscope (FESEM) and low-field nuclear magnetic resonance (LFNMR)) and physical tests (mercury injection capillary pressure (MICP)) were employed, and double logarithmic plots for fractal fitting were illustrated. The fractal dimension of 15 samples was calculated using fractal theory to systematically investigate the pore–fracture structure and fractal characteristics of hydrocarbon source rock (limestone, mudstone, and sandstone) samples from the Late Carboniferous Taiyuan Formation in the Huainan coalfield. MICP experiments revealed that sandstone reservoirs had larger and more uniformly distributed pore throats compared to mudstone and limestone, exhibiting superior connectivity and permeability. The T₂ spectrum characteristic maps obtained using LFNMR were also consistent with the pore distribution patterns derived from MICP experiments, particularly showed that sandstone types exhibited excellent signal intensity across different relaxation time periods and had a broader T₂ spectrum width, which fully indicated that sandstone types possess superior pore structures and higher connectivity. FESEM experiments demonstrated that sandstone pores were highly developed and uniform, with sandstone fractures dominated by large fractures above the micrometer scale. Meanwhile, the FESEM fractal dimension results indicated that sandstone exhibits good fractal characteristics, validating its certain oil storage capacity. Furthermore, the FESEM fractal dimension exhibited a good correlation with the porosity and permeability of the hydrocarbon source rock reservoirs, suggesting that the FESEM fractal dimension can serve as an important parameter for evaluating the physical properties of hydrocarbon source rock reservoirs. This study enriched the basic geological theories for unconventional natural gas exploration in deep coal-bearing strata in the Huainan coalfield. Full article

We improved a scanning magnetic microscope built previously by adding a new detection system and the capability of mapping samples applying magnetic fields from −500 mT to +500 mT. The mechanical structure was also enhanced to decrease vibrations of the system in the earth’s magnetic field. The microscope is based on a differential arrangement of two Hall effect elements. The overall system presented a sensitivity of about 850 $n{T}_{rms}\surd Hz$, and it was calibrated using a 99% pure nickel sphere. The system achieved a magnetic moment sensitivity of the order of 10 nAm². All equipment used for operating the magnetic microscope was controlled by using the LabVIEW^® platform. We also fabricated samples with controlled properties using iron oxide microparticles and epoxy resin with various densities. We obtained the magnetization curves of the composites using the assembled microscope and compared them with the iron oxide powder. Full article

This study investigates the modification and application of natural, micro-scale magnetite (Fe₃O₄)—an iron oxide mineral and one of the most abundant iron ores in the world—as a magnetic carrier for removing six common types of microplastics (MPs) from water: polypropylene (PP), polyethylene (PE), acrylonitrile butadiene styrene (ABS), polystyrene (PS), polyethylene terephthalate (PET), and polyvinyl chloride (PVC). Hexadecyltrimethoxysilane (HDTMS) was employed as a surfactant to modify the naturally hydrophilic magnetite, transforming it into a hydrophobic material. The characterization of magnetite treated with HDTMS for 0, 6, 12, 24, and 48 h was performed using a scanning electron microscope with energy-dispersive X-ray spectroscopy (SEM-EDS) and Fourier transform infrared spectroscopy (FT-IR). The results showed HDTMS sorption on the surface of natural magnetite, confirming successful surface modification. Carrier magnetic separation was then performed to remove PP, PE, ABS, PS, PET, and PVC using surface-modified, natural magnetite in two size fractions: +38–75 µm (fine-sized) and +75–150 µm (coarse-sized). Improved performance was observed with longer HDTMS treatment of magnetite, while greater than 90% MP removal was achieved using fine-sized, surface-modified, natural magnetite. These results suggest that surface modification enhanced the heterogenous interactions between magnetite and MPs via hydrophobic-hydrophobic interactions, leading to efficient MP removal via carrier magnetic separation. Full article

This study focuses on a low-permeability sandstone reservoir in the Changqing Oilfield, aiming to elucidate the formation mechanism and occurrence state of residual oil during late-stage waterflooding development, thereby providing theoretical guidance for refined residual oil recovery. By integrating scanning electron microscopy (SEM), nuclear magnetic resonance (NMR), and digital core analysis, the oil–water occurrence state and dynamic characteristics during waterflooding were systematically investigated. NMR was employed to determine fluid distribution within core pores, while CT scanning was utilized to construct a 3D digital core model, enabling the identification of microscopic residual oil displacement and occurrence states at different flooding stages. The oil displacement efficiency was further analyzed based on variations in oil–water distribution and occurrence states within the core. The results demonstrate that pore and throat size and connectivity are the primary factors governing reservoir permeability. After high-pore-volume (PV) waterflooding, microscopic residual oil predominantly exists as dispersed droplets, films, and small-scale clusters or columns. Although prolonged high-PV waterflooding effectively expands the sweep volume, localized displacement efficiency declines, and reservoir heterogeneity adversely affects sweep volume maintenance. The post-flooding residual oil characteristics are collectively determined by the core’s local connectivity, wettability, and pore–throat morphology. This research systematically analyzes the occurrence patterns and evolutionary trends of residual oil in low-permeability reservoirs during long-term waterflooding, providing critical theoretical insights and technical support for enhanced oil recovery and residual oil exploitation. Full article

Background and Clinical Significance: Vestibular schwannomas (VS) are benign tumors arising from Schwann cells of the eighth cranial nerve. They represent approximately 8% of all intracranial tumors and have an increasing incidence. Larger VS can cause brainstem compression and hydrocephalus, and magnetic resonance imaging (MRI) is the diagnostic modality of choice. Individuals with VS and an elevated body mass index (BMI) can have more postoperative complications due to their weight, which can also negatively impact the preoperative diagnostic process and planning, as well as the surgery itself, as compromises must be made since optimal positioning of the patient is often not feasible. Increased BMI is a recognized risk factor for cerebrospinal fluid (CSF) leak after microscopic resection of a VS. Case Presentation: This report presents a case of a patient with class III obesity who had to undergo a right VS resection with preexisting hydrocephalus and the obstacles encountered by the surgical team throughout the diagnostics process since MRI could not be performed and preoperative planning had to be based on computed tomography (CT) scan; operative treatment, where suboptimal patient placement was achieved for a planned retrosigmoid approach to the pontocerebellar angle (PCA) and postoperative rehabilitation, which was hindered by his high BMI (55 kg/m²) with several complications, such as CSF leak, due to his extreme weight. Conclusions: Despite barriers, optimal tumor resection was obtained with a long neurorehabilitation process, with a favorable outcome, emphasizing the role of a multidisciplinary team. Full article

The ionic soil stabilizer (ISS) can synergistically enhance the mechanical properties and improve the engineering characteristics of iron tailings soil in conjunction with cementitious materials such as cement. In this paper, the influence of ISS on the cement hydration process and the charge repulsion between iron tailings soil particles was studied. By means of Isothermal calorimetry, X-ray diffraction (XRD), Scanning electron microscope (SEM), and Low-field nuclear magnetic resonance microscopic analysis methods such as (LF-NMR), X-ray photoelectron spectroscopy (XPS), Non-evaporable water content and Zeta potential were used to clarify the mechanism of ISS-enhanced cement stabilization of the mechanical properties of iron tailings soil. The results show that in the cement system, ISS weakens the mechanical properties of cement mortar. When ISS content is 1.67%, the 7 d compressive strength of cement mortar decreases by 59.8% compared with the reference group. This retardation arises due to carboxyl in ISS forming complexes with Ca²⁺, creating a barrier on cement particle surfaces, hindering the hydration reaction of the cement. In the cement-stabilized iron tailings soil system, ISS has a positive modification effect. At 0.33% ISS, compared with the reference group, the maximum dry density of the samples increased by 6.5%, the 7 d unconfined compressive strength increased by 35.3%, and the porosity decreased from 13.58% to 11.85%. This is because ISS reduces the double electric layer structure on the surface of iron tailings soil particles, reduces the electrostatic repulsion between particles, and increases the compactness of cement-stabilized iron tailings soil. In addition, the contact area between cement particles increases, the reaction energy barrier height decreases, the formation of Ca(COOH)₂ reduces, and the retarding effect on hydration weakens. Consequently, ISS exerts a beneficial effect on augmenting the mechanical performance of cement-stabilized iron tailings soil. Full article