Search Results (41)

Magnetorheological (MR) materials, with the ability of vectorial response, offer exciting opportunities for next-generation wearables and soft robotic systems. Although some existing MR materials and fiber designs can produce directional responses, they typically rely on strategies—such as hard-magnetic loading or pre-magnetization—that constrain safety and large-scale manufacturability. This Communication highlights a paradigm-shifting advance reported by Pu et al., that a soft-magnetic fibrous architecture achieves genuine vector-stimuli-responsiveness under low, safe magnetic fields without pre-magnetization. We articulate the great breakthrough of this work through a hierarchical design framework, demonstrating how the synergistic innovation at the material (magnetic dipole aligned in low-density polyethylene), fiber (drawing-induced magnetic easy axis), yarn (twist-induced cooperative effects), and fabric (vertical or horizontal magnetic field response capability) levels collectively resolves the longstanding trade-offs between performance, manufacturability, and safety. As a result, this strategy demonstrates strong universality in terms of materials, although only the carbonyl iron particles were used. This approach not only enables programmable bending, stiffening, shear, and compression in textiles but also establishes a versatile platform for magneto-programmable systems. Furthermore, we delineate the critical challenges and future trajectories—from theoretical modeling and integration of complementary stimuli to the development of three-dimensional textile architectures—that this new platform opens for the fields of haptics, soft robotics, and adaptive wearables. Full article

We investigate the role of single-ion anisotropy in stabilizing higher-order skyrmion crystal phases in centrosymmetric magnets under D_3d symmetry. Using a classical spin model that incorporates both a local single-ion anisotropy arising from the two-dimensional crystal symmetry and a D_3d-type magnetic anisotropy originating from the D_3d point-group symmetry, we perform simulated annealing calculations to explore the ground-state spin configurations. We find that a skyrmion crystal with a skyrmion number of two is stabilized over a wide range of parameters of single-ion anisotropy and D_3d-type anisotropy. We also show that the skyrmion core position shifts from an interstitial site to an on-site location as the magnitude of the easy-axis single-ion anisotropy increases. Furthermore, we demonstrate that the magnetic field drives a variety of topological phase transitions depending on the sign and magnitude of the single-ion and D_3d-type anisotropies. These results provide a possible microscopic understanding of how complex topological spin textures can be stabilized in centrosymmetric D_3d magnets, suggesting that multiple phases with topological spin textures could emerge even in the absence of the Dzyaloshinskii–Moriya interaction. Full article

Quercus texana seeds are recalcitrant and thus highly sensitive to desiccation, which makes storage difficult. For practical seed handling, it is important to define their safe water content and to understand how water is distributed during dehydration. The present study utilized magnetic resonance imaging (MRI) and nuclear magnetic resonance (NMR) technologies to investigate the migration and phases of water, respectively, revealing the underlying reasons for the recalcitrance of Q. texana seeds. The water content of fresh Q. texana seeds was found to be 39.6% and the germination percentage was 93.3%. As the water content decreased, the germination percentage decreased continuously, reaching 0% at a water content of 13.0%. At 20.0% water content, the germination percentage was 71.7%. MRI showed that water was primarily stored in the embryo axis and cotyledon center in fresh Q. texana seeds. Water loss occurs in the following order during seed dehydration: embryo axis, cotyledon center, cotyledon periphery, and cotyledon end. However, water in the radicle region persisted until seed water content decreased to 15.0%, at which point no signal was detected. The NMR T₂ relaxation spectrum indicated the presence of bound water (T₂₁ = 0.01–5.44 ms) and free water (T₂₂ = 7.19–1401.93 ms) in the seeds. During the dehydration process, most of the water was lost as free water, and the T₂₂ shifted to longer times. Concurrently, the bound water shifted to shorter T₂₁ times. Overall, for practical purposes, seed water should be maintained at or above 20.0%. MRI further showed that water loss from the radicle plays a decisive role in the decline of seed germination, and that protecting the region of radicle and the cupule scar can effectively retard water loss. Furthermore, the bound-water content is positively correlated with seed germination. Full article

Domestic dogs can sense the geomagnetic field (GMF), spontaneously aligning their bodies along its axis, altering the alignment’s pattern during geomagnetic disturbances. Whether anthropogenic magnetic fields (MF) from high-voltage power lines (PL) influence this behavior remains unclear. We investigated the effects of alternating MF generated by PL on spontaneous magnetic alignment in 36 dogs. Behavior was recorded under north–south (NS) and east–west (EW) oriented PL and compared with control conditions lacking anthropogenic MF. Each dog’s mean alignment angle relative to magnetic north was calculated from >50 measurements per condition, and Grand Means (GMs) were derived. Under control geomagnetically calm conditions, alignment was bimodal (GM = 23°/203°), while geomagnetic storms caused significant shifts and increased angular dispersion. Under NS-oriented PL, alignment remained bimodal (GM = 5°/185°), but under EW-oriented PL it became trimodal (Likelihood ratio test for multimodality: nodes = 3, p = 0.042; GM = 103°/283°). These differences were statistically significant (LME for linearized angles: p < 0.001 for control vs. NS PL and control vs. EW PL). Our results demonstrate that dogs maintain directional alignment under PL exposure, with orientation patterns corresponding to the direction of both MF and PL, which suggests a potentially complex impact involving non-magnetic cues. Full article

We investigate the nonrelativistic quantum dynamics of a spinless particle in a screw-type spacetime endowed with two independent twist controls that interpolate between a pure screw dislocation and a homogeneous twist. From the induced spatial metric, we build the covariant Schrödinger operator, separate variables to obtain a single radial eigenproblem, and include a uniform axial magnetic field and an Aharonov–Bohm (AB) flux by minimal coupling. Analytically, we identify a clean separation between a global, AB-like reindexing set by the screw parameter and a local, curvature-driven mixing generated by the distributed twist. We derive the continuity equation and closed expressions for the azimuthal and axial probability currents, establish practical parameter scalings, and recover limiting benchmarks (AB, Landau, and flat space). Numerically, a finite-difference Sturm–Liouville solver (with core excision near the axis and Langer transform) resolves spectra, wave functions, and currents. The results reveal AB periodicity and reindexing with the screw parameter, Landau fan trends, twist-induced level tilts and avoided crossings, and a geometry-induced near-axis backflow of the axial current with negligible weight in cross-section integrals. The framework maps the geometry and fields directly onto measurable spectral shifts, interferometric phases, and persistent-current signals. Full article

This article analyzes the operating principle of the BMM sensor emitter in order to improve the accuracy of the wireless determination of the BMM sensor coordinates under a massif of destroyed rock in the context of the problem of determining the shift of rocks during gold ore mining. Using numerical simulations, FEM has been developed to develop digital models reflecting individual cases of the propagation of the magnetic field of the emitter located in various geological conditions and positions relative to the rock surface and the vertical axis. The accuracy of determining the coordinates of the radio beacon in the rock has been analyzed, and data on the deviation of the coordinates of the peaks of the magnetic field strength from the radio beacon axis have been obtained in cases of a heterogeneous composition of the rock massif, the influence of the deviation of the emitter axis angle from the vertical, the influence of the unevenness of the collapse relief, and the influence of the superposition of fields from different radiation sources. A study has been carried out to determine the direction of the radio beacon search based on the resulting vector of the emitter’s magnetic field strength. Full article

Accurate current sensing in rectangular conductors is challenged by mechanical deformations, including eccentricity (X/Y-axis shifts) and inclination (Z-axis tilt), which distort magnetic field distributions and induce measurement errors. To address this, we propose a bio-inspired error compensation strategy integrating an elliptically configured Hall sensor array with a hybrid Grey Wolf Optimizer (GWO)-enhanced backpropagation neural network. The eccentric displacement and tilt angle of the conductor are quantified via a three-dimensional magnetic field reconstruction and current inversion modeling. A dual-stage optimization framework is implemented: first, establishing a BP neural network for real-time conductor state estimations, and second, leveraging the GWO’s swarm intelligence to refine network weights and thresholds, thereby avoiding local optima and enhancing the robustness against asymmetric field patterns. The experimental validation under extreme mechanical deformations (X/Y-eccentricity: ±8 mm; Z-tilt: ±15°) demonstrates the strategy’s efficacy, achieving a 65.07%, 45.74%, and 76.15% error suppression for X-, Y-, and Z-axis deviations. The elliptical configuration reduces the installation footprint by 72.4% compared with conventional circular sensor arrays while maintaining a robust suppression of eccentricity- and tilt-induced errors, proving critical for space-constrained applications, such as electric vehicle powertrains and miniaturized industrial inverters. This work bridges bio-inspired algorithms and adaptive sensing hardware, offering a systematic solution to mechanical deformation-induced errors in high-density power systems. Full article

Exchange bias (EB) materials, whose magnetization curve can shift along the field axis after field cooling, have attracted tremendous attention and play a crucial role in the development of fundamental physics as well as practical applications of magnetization storage. In this work, the N-, P-, and Q-type ferrimagnets of Néel’s notation were realized in mixed valence metal formates [CH₃NH₂CH₃]_n[Cr^III_1−xFe^III_xFe^II(HCO₂)₆]_n by altering x, respectively. The positive and negative EB was found in N- and P-type ferrimagnets. The exchange anisotropy originates from the antiferromagnetic exchange interaction between the uncompensated spin of the host ferrimagnetic lattice and the pinned compensated spin of the antiferromagnetic clusters as a guest, which is rooted in the valence disorder of the iron ions. Full article

Excessive spatter formation in conventional CO₂ arc welding significantly diminishes welding quality and efficiency, posing a critical challenge for industrial applications. To address this issue, this study investigated the mechanisms of metal transfer behavior and spatter formation under the influence of a longitudinal magnetic field (LMF) using a shadow-graph technique with high-speed imaging and back-laser illumination, also coupled with Computational Fluid Dynamics (CFD)-based arc-droplet numerical simulations. The results show that increasing the magnetic flux density (MFD) from 0 to 2 mT shifted the transfer mode from the repelled transfer to the globular transfer, while higher MFDs (3–4 mT) induced rotating repelled transfer. The globular transfer at 2 mT was considered to be primarily produced by the centrifugal effect due to the rotational motion of the molten metal inside the droplet, which was caused by the Lorentz force affected by LMF. The higher droplet temperature in this condition also contributed to forming this transfer mode, preventing the formation of repelled transfer through a decrease in the arc pressure. On the contrary, in the higher MFDs, the droplet temperature decreased to increase the arc pressure, lifting the droplet up. Furthermore, the very strong centrifugal effect rotated the molten metal column around the wire axis to induce the rotating repelled transfer. The spatter formation was found to occur with the two-stage motion of the curved long tail without LMF and at 4 mT, and also with the exploding molten metal column at 4 mT, due to an imbalance of the Lorentz force acting on the molten metal. On the other hand, the neck formation facilitated smooth droplet detachment without forming the curved long tail at 2 mT, reducing spatter significantly. These findings offer valuable insights for optimizing welding quality and efficiency by stabilizing globular transfer under an optimal LMF. Full article

A review of recent advances in spacetime optics is given, with special emphasis on time refraction. This is a basic optical process, occurring at a temporal discontinuity or temporal boundary, which is able to produce various different effects, such as frequency shifts, energy amplification, time reflection, and photon emission. If, instead of a single discontinuity, we have two reverse temporal boundaries, we can form a temporal beam splitter, where temporal interferences can occur. It will also be shown that, in the presence of an axis of symmetry, such as a magnetic field, the temporal beam splitter can induce a rotation of the initial polarization state, similar to a Faraday rotation. Recent work on time crystals, superluminal fronts, and superfluid light will be reviewed. Time gates based on spacetime optical effects will be discussed. We also mention recent work on optical metamaterials. Finally, the quantum properties of time refraction, which imply the emission of photon from vacuum, are considered, while similar problems in high-energy QED associated with electron–positron pairs are briefly mentioned. Full article

Permanent-magnet-assisted synchronous reluctance motors (PMA-SynRMs) are widely used in modern industry as a kind of electromagnetic energy conversion device with high output torque, high power density, high efficiency, and excellent speed regulation. In this paper, an asymmetric-rotor PMA-SynRM combined with a Halbach array is proposed based on the conventional PMA-SynRM without modifying the amount of permanent magnet. With the finite element no-load analysis, it is proven that the permanent magnet arrangement of this method can achieve better flux focusing effect and magnetic-axis-shift (MAS) effect. A significant increase and shift of the air-gap magnetic density has also been observed. Meanwhile, the load simulation demonstrated that the proposed model possesses higher utilization of permanent magnet torque and reluctance torque compared to the conventional model. In addition, a multi-objective optimization has been performed for the rotor structure of the proposed model, and the optimized model improved the average torque by 25.32% and reduced the torque ripple by 76.92% compared to the conventional model. Finally, the constant power speed range (CPSR) performance and anti-demagnetization performance have been analyzed for the three models. The results showed that the proposed and optimized models performed better on constant power speed range, and all three models of permanent magnets had good anti-demagnetization performance. The maximum demagnetization rate of the optimized model is reduced by 13.84% compared to the proposed model at an operating condition of 200 °C and nine times the rated current. Full article

Due to the rare earth supply shortage, ThMn₁₂-type RFe₁₂-based (R is the rare earth element) magnets with lean rare earth content are gaining more concern. Most ThMn₁₂-type RFe₁₂ structures are thermodynamically metastable and require doping of the stabilizing element Ti. However, the Ti-doping effects on the hard magnetic properties of RFe₁₁Ti have not been thoroughly investigated. Herein, based on density functional theory calculations, we report the Ti-doping effects on the phase stability, intrinsic hard magnetic properties and electronic structures of RFe₁₁Ti (R = La, Ce, Pr, Nd, Sm, Y, Zr). Our results indicate that Ti-doping not only increases their phase stability, but also enhances the magnetic hardness of ground-state RFe₁₂ phases. Particularly, it leads to the transition of CeFe₁₁Ti and PrFe₁₁Ti from easy-plane to easy-axis anisotropy. Charge density distributions demonstrate that Ti-doping breaks the original symmetry of the R-site crystal field, which alters the magnetic anisotropy of RFe₁₁Ti. Projected densities of states reveal that the addition of Ti results in the shift of occupied and unoccupied f-electron energy levels of rare earth elements, affecting their magnetic exchange. This study provides an insight into regulating the hard magnetic properties of RFe₁₂-based magnets by Ti-doping. Full article

A theoretical analysis was conducted to examine the electronic and optical properties of a confined electron and a hole in a type-II core-shell spherical quantum dot composed of CdSe/ZnTe and ZnTe/CdSe. The Schrödinger equation for the electron and the hole was numerically solved using COMSOL-Multiphysics software in the 2D axisymmetric module, which employs the finite element method under the effective mass approximation. A Fortran code was utilized to calculate excitonic energy, specifically designed to solve the Coulomb integral. The calculations encompassed variations in the inner radius ($R_1$), as well as variations in the electric ($F_z$) and magnetic (B) fields along the z-axis. The absorption coefficients were determined for transitions between the hole and electron ground states, considering z-polarized incident radiation. Including a magnetic field increases the transition energy, consequently causing the absorption peaks to shift toward the blue region of the spectrum. On the other hand, the electric field decreased the overlap of the electron and hole wavefunctions. As a result, the amplitude of the absorption peaks decreased with an increase in the electric field. Full article

In this study, we grew pristine and Ni-doped vertically aligned zinc oxide nanowires (NWs) on a glass substrate. Both the doped and pristine NWs displayed dominant 002 peaks, confirming their vertical alignment. The Ni-doped NWs exhibited a leftward shift compared to the pristine NWs. TEM measurements confirmed the high crystallinity of individual NWs, with a d-spacing of ~0.267 nm along the c-axis. Ni-doped NWs had a higher density, indicating increased nucleation sites due to nickel doping. Doped NW films on glass showed enhanced absorbance in the visible region, suggesting the creation of sub-gap defect levels from nickel doping. Magnetization vs. magnetic field measurements revealed a small hysteresis loop, indicative of soft ferromagnetic behavior. Current transient plots demonstrated an increase in current with an applied magnetic field. Two-terminal devices exhibited a photo response that intensified with magnetic field application. This increase was attributed to parallel grain alignment, resulting in enhanced carrier concentration and photo response. In the dark, transport properties displayed negative magnetoresistance behavior. This magneto-transport effect and enhanced photo response (under an LED at ~395 nm) were attributed to giant magnetoresistance (GMR) in the aligned NWs. The observed behavior arose from reduced carrier scattering, improved transport properties, and parallel spin alignment in the magnetic field. Full article

The properties of a superconducting spin valve Fe1/Cu/Fe2/Cu/Pb on a piezoelectric PMN–PT substrate ([Pb(Mg_1/3Nb_2/3)O₃]_0.7–[PbTiO₃]_0.3) in electric and magnetic fields have been studied. The magnitude of the shift of the superconducting transition temperature in the magnetic field H = 1 kOe equal to 150 mK was detected, while the full superconducting spin valve effect was demonstrated. Abnormal behavior of the superconducting transition temperature was observed, which manifests itself in the maximum values of the superconducting transition temperature with the orthogonal orientation of the magnetization vectors of ferromagnetic layers. This may indirectly indicate the formation of the easy axis of the magnetization vector of the Fe1-layer adjacent to the piezoelectric substrate PMN–PT. It was found that with an increase in the magnitude of the applied electric field to the PMN–PT substrate, the shift in the superconducting transition temperature of the Fe1/Cu/Fe2/Cu/Pb heterostructure increases. The maximum shift was 10 mK in an electric field of 1 kV/cm. Thus, it has been shown for the first time that a piezoelectric superconducting spin valve can function. Full article