Search Results (234)

With the global low-carbon energy transition, accurate prediction of thermal and physical parameters of deep rock masses is critical for geothermal resource development. To address the insufficient generalization ability of machine learning models caused by scarce measured data on granite thermal conductivity, this study focused on granites from the Gonghe Basin and Songliao Basin in Qinghai Province. A data augmentation strategy combining cubic spline interpolation and Gaussian noise injection (with noise intensity set to 10% of the original data feature range) was proposed, expanding the original 47 samples to 150. Thermal conductivity prediction models were constructed using Support Vector Machine (SVM), Random Forest (RF), and Backpropagation Neural Network(BPNN). Results showed that data augmentation significantly improved model performance: the RF model exhibited the best improvement, with its coefficient of determination R² increasing from 0.7489 to 0.9765, Root Mean Square Error (RMSE) decreasing from 0.1870 to 0.1271, and Mean Absolute Error (MAE) reducing from 0.1453 to 0.0993. The BPNN and SVM models also improved, with R² reaching 0.9365 and 0.8743, respectively, on the enhanced dataset. Feature importance analysis revealed porosity (with a coefficient of variation of 0.88, much higher than the longitudinal wave velocity’s 0.27) and density as key factors, with significantly higher contributions than longitudinal wave velocity. This study provides quantitative evidence for data augmentation and machine learning in predicting rock thermophysical parameters, promoting intelligent geothermal resource development. Full article

Natural hydrogen is generated by fairly deep processes and/or in low-permeability rocks. In such contexts, fluids circulate mainly through the network of faults and fractures. However, hydrogen flows from these hydrogen-generating layers can reach sedimentary rocks with more typical permeability and porosity, allowing H₂ flows to spread out rather than be concentrated in fractures. In that case, three different H₂ transport modes exist: advection (displacement of water carrying dissolved gas), diffusion, and free gas Darcy flow. Numerical models have been run to compare the efficiency of these different modes and the pathway they imply for the H₂ in a sedimentary basin with active aquifers. The results show the key roles of these aquifers but also the competition between free gas flow and the dissolved gas displacement which can go in opposite directions. Even with a conservative hypothesis on the H₂ charge, a gaseous phase exists at few kilometers deep as well as free gas accumulation. Gaseous phase displacement could be the faster and diffusion is neglectable. The modeling also allows us to predict where H₂ is expected in the soil: in fault zones, eventually above accumulations, and, more likely, due to exsolution, above shallow aquifers. Full article

The Shenhu sea area is rich in unconsolidated hydrate reserves, but the formation mineral particles are small, the rock cementation is weak, and the coupling mechanism of hydrate phase change, fluid seepage, and formation deformation is complex, resulting in unclear productivity change law under depressurization exploitation. Therefore, a thermal–fluid–solid–chemical coupling model for natural gas hydrate depressurization exploitation in the Shenhu sea area was constructed to analyze the variation law of reservoir parameters and productivity. The results show that within 0–30 days, rapid near-well pressure drop (13.83→9.8 MPa, 36.37%) drives peak gas production (25,000 m³/d) via hydrate dissociation, with porosity (0.41→0.52) and permeability (75→100 mD) increasing. Within 30–60 days, slower pressure decline (9.8→8.6 MPa, 12.24%) and fines migration cause permeability fluctuations (120→90 mD), reducing gas production to 20,000 m³/d. Within 60–120 days, pressure stabilizes (~7.6 MPa) with residual hydrate saturation < 0.1, leading to stable low permeability (60 mD) and gas production (15,000 m³/d), with cumulative production reaching 2.2 × 10⁶ m³. This study clarifies that productivity is governed by coupled “pressure-driven dissociation–heat limitation–fines migration” mechanisms, providing key insights for optimizing depressurization strategies (e.g., timed heat supplementation, anti-clogging measures) to enhance commercial viability of unconsolidated hydrate reservoirs. Full article

This study addresses the limitations of conventional evaluation methods caused by low porosity, strong heterogeneity, and complex pore structures in tight sandstone reservoirs. Through integrated rock physics experiments and multi-physical field modeling, the research systematically investigates the coupled response mechanisms between electrical and elastic parameters. The experimental approach includes pore structure characterization, quantitative mineral composition analysis, resistivity and polarizability measurements under various saturation conditions, P- and S-wave velocity testing, and scanning electron microscopy (SEM) imaging. The key findings show that increasing porosity leads to significant reductions in resistivity and elastic wave velocities, while also increasing surface conductivity. Specifically, clay minerals enhance surface conductivity through interfacial polarization effects and decrease rock stiffness, which exacerbates wave velocity attenuation. Furthermore, resistivity exhibits a nonlinear negative correlation with water saturation, with sharp increases at low saturation levels due to the disruption of conductive pathways. By integrating the Modified Generalized Effective Medium Theory of Induced Polarization (MGEMTIP) and Kuster–Toksöz models, this study establishes quantitative relationships between porosity, saturation, and electrical/elastic parameters, and constructs cross-plot templates that correlate elastic wave velocities with resistivity and surface conductivity. These analyses reveal that high-porosity, high-saturation zones are characterized by lower resistivity and wave velocities, coupled with significantly higher surface conductivity. The proposed methodology significantly improves the accuracy of reservoir evaluation and enhances fluid identification capabilities, providing a solid theoretical foundation for the efficient exploration and development of tight sandstone reservoirs. Full article

Assessment of contaminant dispersal in sandstones requires hydraulic characterization with a combination of datasets that span from the core plugs to wellbores and up to the field scale as the matrix and fractures are both hydraulically conductive. Characterizing the hydraulic properties of the matrix is fundamental because contaminants diffuse into the fractured porous blocks. Fractures are highly conductive, and the determination of the number of hydraulically active rock discontinuities makes discrete fracture network models of solute transport reliable. Recent advances (e.g., active line source temperature logs) in hydro-geophysics have allowed the detection of 40% of hydraulically active fractures in a lithified sandstone. Tracer testing has revealed high (~10⁻⁴–10⁻² ms⁻¹) flow velocities and low (~10⁻²–10⁻⁴) effective porosities. Contaminants can therefore move rapidly in the subsurface. The petrophysical characterization of the plugs extracted from the cores, in combination with borehole hydro-geophysics, allows the characterization of either matrix or fracture porosity, but the volume of sandstone characterized is low. Tracer tests cannot quantify matrix or fracture porosity, but the observation scale is larger and covers the minimum representative volume. Hence, the combination of petrophysics, borehole hydro-geophysics, and tracer testing is encouraged for the sustainable management of solute transport in dual porosity sandstones. Full article

As an important unconventional oil and gas resource, tight oil exploration and development is of great significance to ensure energy supply under the background of continuous growth of global energy demand. Low-porosity and low-permeability reservoirs are characterized by tight rock properties, poor physical properties, and complex pore structure, and as a result the fine calculation of logging reservoir parameters faces great challenges. In addition, the crude oil in this area has high viscosity, the formation water salinity is low, and the oil reservoir resistivity shows significant spatial variability in the horizontal direction, which further increases the difficulty of oil and water reservoir identification and affects the accuracy of oil saturation calculation. Targeting the above problems, the Nutcracker Optimization Algorithm (NOA) was used to optimize the hyperparameters of the random forest classification model, and then the optimal hyperparameters were input into the random forest model, and the conventional logging curve and oil test data were combined to identify and classify the reservoir fluids, with the final accuracy reaching 94.92%. Compared with the traditional Hingle map intersection method, the accuracy of this method is improved by 14.92%, which verifies the reliability of the model for fluid identification of low-porosity and low-permeability reservoirs in the research block and provides reference significance for the next oil test and production test layer in this block. Full article

We conducted ultrasonic (1-MHz) laboratory measurements on 210 samples from the Vaca Muerta Formation (Neuquén Basin, Argentina) to determine the factors influencing acoustic velocities in siliciclastic–carbonate mudstone. We quantitatively assessed the calcium carbonate and total organic carbon (TOC) content and qualitatively identified the quartz and clay mineralogy. For brine-saturated samples, P-wave velocities ranged from 2826 to 6816 m/s, S-wave velocities ranged from 1474 to 3643 m/s, and porosity values ranged from 0.01 to 19.4%. Carbonate content percentages, found to be critically important, vary widely from 0.08 to 98.0%, while TOC ranged from 0 to 5.3%. Velocity was primarily controlled by carbonate content and, to a lesser extent, by the non-carbonate mineralogy of the rock (e.g., quartz, clay minerals). TOC content had little effect on the acoustic properties. Due to the low porosity of most samples, mineral composition had a stronger influence on velocity than porosity or pore geometry. The V_p/V_s ratio of dry samples ranged from 1.38 to 1.97 and decreased as porosity increased. In saturated samples, the V_p/V_s ratio ranged from 1.46 to 2.06 and appeared independent of porosity. A clear distinction between carbonate and mixed lithofacies under both saturated and dry conditions was observed in all samples. Full article

This study develops a numerical model to simulate groundwater flow and contaminant transport in a “typical hydrogeological environment” of northern New Jersey, addressing freshwater decline. Focusing on the Lower Passaic water management area (WMA), we model chloride transport in a fractured-rock aquifer, where fracture networks control hydraulic conductivity and porosity. The urbanized setting—encompassing Montclair State University (MSU) and municipal wells—features heterogeneous groundwater systems and critical water resources, providing an ideal case study for worst-case contaminant transport scenarios. Using MODFLOW and MODPATH, we simulated flow and tracked particles over 20 years. Results show that chloride from MSU reached the Third River in 4 years and the Passaic River in 10 years in low-porosity fractures (0.2), with longer times (8 and 20 years) in high-porosity zones (0.4). The First Watchung Mountains were identified as the primary recharge area. Chloride was retained in immobile pores but transported rapidly through fractures, with local flow systems (MSU to Third River) faster than regional systems (MSU to Passaic River). These findings confirm chloride in groundwater, which may originate from road salt application, can reach discharge points in 4–20 years, emphasizing the need for recharge-area monitoring, salt-reduction policies, and site-specific assessments to protect fractured-rock aquifers. Full article

Pulsed Power Plasma Stimulation (3PS) represents a promising and environmentally favorable alternative to conventional well stimulation techniques for enhancing subsurface permeability. This comprehensive review tracks the evolution of plasma-based rock stimulation, offering insights from key laboratory, numerical, and field-scale studies. The review begins with foundational electrohydraulic discharge concepts and progresses through the evolution of Pulsed Arc Electrohydraulic Discharge (PAED) and the more advanced 3PS systems. High-voltage, ultrafast plasma discharges generate mechanical shockwaves and localized thermal effects that result in complex fracture networks, particularly in tight and crystalline formations. Compared to conventional well stimulation techniques, 3PS reduces water use, avoids chemical additives, and minimizes induced seismicity. Laboratory studies demonstrate significant improvements in permeability, porosity, and fracture intensity, while field trials show an increase in production from oil, gas, and geothermal wells. However, 3PS faces some limitations such as short stimulation radii and logistical constraints in wireline-based delivery systems. Emerging technologies like plasma-assisted drilling and hybrid PDC–plasma tools offer promising integration pathways. Overall, 3PS provides a practical, scalable, low-impact stimulation approach with broad applicability across energy sectors, especially in environmentally sensitive or water-scarce regions. Full article

The spatiotemporal heterogeneity of moisture distribution causes the coal pillar dams in underground water reservoirs to undergo long-term dry–wet cycles (DWCs) under varying moisture content increments (MCIs). Accurately measuring the pore damage and fractal dimensions (D_f) of coal rock by different MCIs under DWCs is a prerequisite for in-depth disclosure of the strength deterioration mechanism of underground reservoir coal pillar dams. This study employed low-field nuclear magnetic resonance (LF-NMR) to quantitatively characterize the pore structural evolution and fractal dimension with different MCI variations (Δw = 4%, 6%, 8%) after one to five DWCs. The results indicate that increasing MCIs at constant DWC numbers (N_DWC) induces significant increases in pore spectrum area, adsorption pore area, and seepage pore area. MRI visualization demonstrates a progressive migration of NMR signals from sample peripheries to internal regions, reflecting enhanced moisture infiltration with higher MCIs. Total porosity increases monotonically with MCIs across all tested cycles. Permeability, T₂ cutoff (T_2C), and D_f of free pores exhibit distinct response patterns. A porosity-based damage model further reveals that the promoting effect of cycle numbers on pore development and expansion outweighs that of MCIs at N_DWC = 5. This pore-scale analysis provides essential insights into the strength degradation mechanisms of coal pillar dams under hydro-mechanical coupling conditions. Full article

This study systematically analyzes reservoir formation mechanisms under deep burial conditions, integrating macroscopic observations from representative ultra-deep clastic reservoirs in four major sedimentary basins in central and western China. Developing effective clastic reservoirs in ultra-deep strata (6000–8000 m) remains a critical yet debated topic in petroleum geology. Recent advances in exploration techniques and geological understanding have challenged conventional views, confirming the presence of viable clastic reservoirs at such depths. Findings reveal that reservoir quality in ultra-deep strata is preserved and enhanced through the interplay of sedimentary, diagenetic, and tectonic processes. Key controlling factors include (1) high-energy depositional environments promoting primary porosity development, (2) proximity to hydrocarbon source rocks enabling multi-phase hydrocarbon charging, (3) overpressure and low geothermal gradients reducing cementation and compaction, and (4) late-stage tectonic fracturing that significantly improves permeability. Additionally, dissolution porosity and fracture networks formed during diagenetic and tectonic evolution collectively enhance reservoir potential. The identification of favorable reservoir zones under the sedimentation–diagenesis-tectonics model provides critical insights for future hydrocarbon exploration in ultra-deep clastic sequences. Full article

The identification and prediction of effective reservoir rocks are important for evaluating the energy production potential of ultra-deep tight sandstone reservoirs. Taking the Keshen gas field, Tarim Basin, as an example, three distinct petrofacies are divided according to petrology, pores, and diagenesis. Petrofacies, well logs, and factor analysis are combined to predict effective reservoir rocks. We find that petrofacies A has a relatively coarse grain size, moderate mechanical compaction, diverse but low-abundance authigenic minerals, and well-developed primary and secondary pores. It is an effective reservoir rock. Petrofacies B and petrofacies C are tight sandstones with a poorly developed pore system and almost no dissolution. Petrofacies B features abundant compaction-susceptible ductile grains, intense mechanical compaction, and underdeveloped authigenic minerals, while petrofacies C features pervasive carbonate cementation with a poikilotopic texture. We combine well logging with gamma ray, acoustic, bulk density, neutron porosity, resistivity, and factor analyses to facilitate the development of petrofacies prediction models. The models reveal interbedded architecture where effective reservoir rocks are interbedded with tight sandstone, resulting in the restricted connectivity and pronounced reservoir heterogeneity. Classifying and combining well logs with a factor analysis to predict petrofacies provide an effective means for evaluating the energy potential of ultra-deep reservoirs. Full article

The Dolomite reservoir of the Maokou Formation is rich in gas resources in the central Sichuan Basin. Acid fracturing is an important technical means to improve reservoir permeability and productivity. The interaction mode of the dolomite and limestone acid system will affect the effect of reservoir reconstruction. In order to clarify the influence of complex structure on fracture morphology, we explore the fracturing effect of different acid systems. Physical simulation experiments of true triaxial acid fracturing were carried out with two acid systems and downhole full-diameter cores. The experimental results show: (1) After the carbonate rock is subjected to acid fracturing using a “self-generated acid + gel acid” system, the fracture pressure drops significantly by up to 60%. The morphology of the acid-eroded fractures becomes more complex, with an increase in geometric complexity of about 28% compared to a single acid solution system. It is prone to form three-dimensional “spoon” shaped fractures, and the surface of the acid-eroded fractures shows light yellow acid erosion marks. Analysis of the acid erosion marks indicates that the erosion depth on the fracture surface reaches 0.8–1.2 mm, which is deeper than the 0.2 mm erosion depth achieved with a single system. (2) Acid solution is difficult to penetrate randomly distributed calcite veins with a low porosity and permeability structure. When the fracture meets the calcite vein, the penetration rate of acid solution drops sharply to 15–20% of the initial value, resulting in a reduction of about 62% of the acid erosion area in the limestone section behind. And the acid erosion traces in the limestone behind the calcite vein are significantly reduced. The acid erosion cracks are easy to open on the weak surface between dolomite and limestone, causing the fracture to turn. (3) The results of field engineering and experiment are consistent, and injecting authigenic acid first in the process of reservoir reconstruction is helpful to remove pollution. The recovery rate of near-well permeability is more than 85% with pre-generated acid. Reinjection of gelled acid can effectively communicate the natural weak surface and increase the complexity of cracks. The average daily oil production of the completed well was increased from 7.8 m³ to 22.5 m³, and the increase factor reached 2.88. Full article

In this article, we consider the roles of transcrustal magma- and fluid-conducting faults (TCMFCFs) in the formation of mineral deposits, showing the importance of deep sources of heat and hydrothermal solutions in the genesis and history of deposit formation. As a result of the impact on the lithosphere of mantle plumes rising along TCMFCFs, intense block deformations and tectonic movements are generated; rift systems, and volcanic–plutonic belts spatially combined with them, are formed; and intrusive bodies are introduced. These processes cause epithermal ore formation as a consequence of the impact of mantle plumes rising along TCMFCF to the lithosphere. At hydrocarbon fields, they play extremely important roles in conductive and convective heat, as well as in mass transfer to the area of hydrocarbon generation, determining the relationship between the processes of lithogenesis and tectogenesis, and activating the generation of hydrocarbons from oil and gas source rock. Detection of TCMFCFs was carried out using MMSS (the method of microseismic sounding) and MTSM (the magnetotelluric sounding method), in combination with other geological and geophysical data. Practical examples are provided for mineral deposits where subvertical transcrustal columns of increased permeability, traced to considerable depths, have been found; the nature of these unique structures is related to faults of pre-Paleozoic emplacement, which determined the fragmentation of the sub-crystalline structure of the Earth and later, while developing, inherited the conditions of volumetric fluid dynamics, where the residual forms of functioning of fluid-conducting thermohydrocolumns are granitoid batholiths and other magmatic bodies. Experimental modeling of deep processes allowed us to identify the quantum character of crystal structure interactions of minerals with “inert” gases under elevated thermobaric conditions. The roles of helium, nitrogen, and hydrogen in changing the physical properties of rocks, in accordance with their intrastructural diffusion, has been clarified; as a result of low-energy impact, stress fields are formed in the solid rock skeleton, the structures and textures of rocks are rearranged, and general porosity develops. As the pressure increases, energetic interactions intensify, leading to deformations, phase transitions, and the formation of chemical bonds under the conditions of an unstable geological environment, instability which grows with increasing gas saturation, pressure, and temperature. The processes of heat and mass transfer through TCMFCFs to the Earth’s surface occur in stages, accompanied by a release of energy that can manifest as explosions on the surface, in coal and ore mines, and during earthquakes and volcanic eruptions. Full article

Fractal dimension has proven to be a valuable tool in the analysis of geological data. For instance, it can be used for assessing the distribution and connectivity of fractures in rocks, which is important for evaluating hydrocarbon storage potential. However, while calculating a single fractal dimension for an entire geological profile provides a general overview, it can obscure local variations. These localized fluctuations, if analyzed, can offer a more detailed and nuanced understanding of the profile’s characteristics. Hence, this study proposes a fractal characterization procedure using a new strategy based on moving windows applied to the analysis domain, enabling the evaluation of data multifractality through the Dynamical Approach Method. Validations for the proposed methodology were performed using controlled artificial data generated from Weierstrass–Mandelbrot functions. Then, the methodology was applied to real geological profile data measuring permeability and porosity in oil wells, revealing the fractal dimensions of these data along the depth of each analyzed case. The results demonstrate that the proposed methodology effectively captures a wide range of fractal dimensions, from high to low, in artificially generated data. Moreover, when applied to geological datasets, it successfully identifies regions exhibiting distinct fractal characteristics, which may contribute to a deeper understanding of reservoir properties and fluid flow dynamics. Full article