Search Results (187)

This paper presents a novel mechanically beam-steered antenna system for 10 GHz applications, enabled by multi-material 3D-printing technology. The proposed design eliminates the need for complex electronic circuitry by integrating a mechanically rotatable, 3D-printed hemispherical lens with a conventional rectangular patch antenna. The system comprises three main components: a 10-GHz patch antenna, a precision-fabricated hemispherical dielectric lens produced via stereolithography (SLA), and a structurally robust rotation assembly fabricated using fused deposition modeling (FDM). The mechanical rotation of the lens enables discrete beam-steering from −45° to +45° in 5° steps. Experimental results demonstrate a gain improvement from 6.21 dBi (standalone patch) to 10.47 dBi with the integrated lens, with minimal degradation across steering angles (down to 9.59 dBi). Simulations and measurements show strong agreement, with the complete system achieving 94% accuracy in beam direction. This work confirms the feasibility of integrating additive manufacturing with passive beam-steering structures to deliver a low-cost, scalable, and high-performance alternative to electronically scanned arrays. Moreover, the design is readily adaptable for motorized actuation and closed-loop control via embedded systems, enabling future development of real-time, programmable beam-steering platforms. Full article

Although epsilon-near-zero (ENZ) media have emerged as a promising platform for power dividers, the majority of existing designs are confined to fixed power splitting. In this work, two dynamically tunable power dividers using waveguide ENZ media are proposed by precisely modulating the internal magnetic field and the widths of the output waveguides. The first approach features a mechanically reconfigurable ring-shaped ENZ waveguide. By continuously re-distributing the magnetic field within the ENZ tunneling channels utilizing rotatable copper plates, arbitrary power division among multiple output ports is constructed. The second design integrates a rectangular-loop ENZ cavity into a substrate-integrated waveguide, with four positive–intrinsic–negative diodes embedded to dynamically activate specific output ports. This configuration steers electromagnetic energy toward output ports with varying cross-sectional areas, enabling on-demand control over both the power division and the number of output ports. Both analytical and full-wave simulation results confirm dynamic power division, with transmission efficiencies exceeding 93%. Despite differences in structure and actuation mechanisms, both designs exhibit flexible field control, high reconfigurability, and excellent transmission performance, highlighting their potential in advanced applications such as real-time wireless communications, multi-input–multi-output systems, and reconfigurable antennas. Full article

The continuous-wave (CW) illuminator, whose fundamentals are related to the theoretical understanding of loop antennas loaded with ferrite materials, is a device which plays an important role in electromagnetic pulse (EMP) susceptibility assessment. However, existing theoretical formulas do not consider cases where ferrite materials are loaded into the loop antenna. This paper provides a new explicit theoretical formula for the impedance of a circular loop antenna loaded with ferrite materials for CW illuminator design, and explores the variation regularity of its input impedance. Loading ferrite materials affects the internal impedance of the loop antenna and forces some modifications to the classical calculation procedure, resulting in an asymptotic numerical calculation method and a closed-form solution. The full-wave simulation results from CST Studio Suite show a maximum error of less than 0.99%, compared to the classical theory. With ferrite material loaded, the input impedance of the loop antenna is significantly reduced and smoothed in a wide range of normalized radii. For a loop antenna with a fixed circumference, the input impedance indicates that the Q-factor decreases as the thickness of the ferrite material increases. Conversely, for a ferrite-loaded loop antenna with a constant material thickness, a larger loop circumference results in a higher Q-factor. In summary, this study provides a fast and accurate computational method for the input impedance design of CW illuminators, while also offering an effective tool for further research on the performance of ferrite-loaded loop antennas. Full article

Precise timing synchronization remains a fundamental requirement for modern navigation and communication systems, where the miniaturization of Loran-C infrastructure presents both technical challenges and practical significance. Conventional miniaturized loop antennas cannot simultaneously meet the requirements of the Loran-C signal for both radiation intensity and bandwidth due to inherent quality factor (Q) limitations. A sub-cubic-meter impedance matching (IM) antenna is proposed, featuring a −20 dB bandwidth of 18 kHz and over 7-fold radiation enhancement. The proposed design leverages a planar-transformer-based impedance matching network to enable efficient 100 kHz operation in a compact form factor, while a resonant coil structure is adopted at the receiver side to enhance the system’s sensitivity. The miniaturized Loran-C timing system incorporating the IM antenna achieves an extended decoding range of >100 m with merely 100 W input power, exceeding conventional loop antennas limited to 30 m operation. This design successfully achieves overall miniaturization of the Loran-C timing system while breaking through the current transmission distance limitations of compact antennas, extending the effective transmission range to the hundred-meter scale. The design provides a case for developing compact yet high-performance Loran-C systems. Full article

In order to break through the difficulties with a very-low-frequency (VLF) miniaturized antenna with small power capacity and low radiation efficiency, this paper proposes a high-radiation-field-strength magnetic loop antenna based on a nanocrystalline alloy magnetic core. A high-permeability nanocrystalline toroidal core (μ_r = 50,000, B_s = 1.2 T) is used to optimize the thickness-to-diameter ratio (t = 0.08) and increase the effective permeability to 11,000. The Leeds wires, characterized by their substantial carrying capacity, are manufactured through a toroidal winding process. This method results in a 68% reduction in leakage compared to traditional radial winding techniques and enhances magnetic induction strength by a factor of 1.5. Additionally, this approach effectively minimizes losses, thereby facilitating support for kilowatt-level power inputs. A cascaded LC resonant network (resonant capacitance 2.3 μF) and ferrite balun transformer (power capacity 3.37 kW) realize a 20-times amplification of the input current. A series connection of a high-voltage isolation capacitor blocks DC bias noise, guaranteeing the stable transmission of 1200 W power, which is 6 times higher than the power capacity of traditional ring antenna. At 7.8 kHz frequency, the magnetic field strength at 120 m reaches 47.32 dBμA/m, and, if 0.16 pT is used as the threshold, the communication distance can reach 1446 m, which is significantly better than the traditional solution. This design marks the first instance of achieving kilowatt-class VLF effective radiation in a compact 51 cm-diameter magnetic loop antenna, offering a highly efficient solution for applications such as mine communication and geological exploration. Full article

Magnetic resonance imaging (MRI) is a powerful medical imaging technique used for acquiring high-resolution anatomical and functional images of the human body. With the development of an 11.74 Tesla (T) human MRI system at our facility, we are designing novel radiofrequency (RF) coils optimized for brain imaging at ultra-high fields. To meet specific absorption rate (SAR) safety limits, this study focuses on localized imaging of individual brain lobes rather than whole-brain array designs. Conventional loop coils, while widely used, offer limited |B₁|-field uniformity at 500 MHz—the Larmor frequency at 11.74 T, which can reduce image quality. Therefore, it is important to develop antennas and coils for highly uniform fields. As an alternative, we propose an elliptical microstrip design, which combines the compact resonant properties of microstrips with the enhanced field coverage provided by loop geometry. We simulated a three-element elliptical microstrip array and compared its performance with a conventional loop coil. The proposed design demonstrated improved magnetic field uniformity and coverage across targeted brain regions. Preliminary bench-top validation confirmed the feasibility of resonance tuning at 500 MHz, supporting its potential for future high-field MRI applications. Full article

Olfaction has been extensively studied in the yellow fever mosquito, Aedes aegypti. This species uses its sense of smell to find blood hosts and other resources, contributing to its impact as a vector for human pathogens. Two major families of protein-coding genes, the odorant receptors (Ors) and the ionotropic receptors (Irs), provide the mosquito with sensitivities to distinct classes of volatile compounds in the antennae. Individual tuning receptors in both families require co-receptors for functionality: Orco for all Ors, and Ir8a for many Irs, especially ones that are involved in carboxylic acid detection. In Drosophila melanogaster, disruptions of Orco or Ir8a impair receptor function, tuning receptor expression, and membrane localization, leading to general anosmia. We reasoned that Orco and Ir8a might also be important for coordinated chemosensory receptor expression in the antennal sensory neurons of Ae. aegypti. To test this, we performed RNAseq and differential expression analysis in wildtype versus Orco^−/− and Ir8a^−/− mutant adult female antennae. Our analyses revealed Or and Ir tuning receptors are broadly under-expressed in Orco^−/− mutants, while a subset of tuning Irs are under-expressed in Ir8a mutants. Other chemosensory and non-chemosensory genes are also dysregulated in these mutants. Furthermore, we identify differentially expressed transcription factors including homologs of the Drosophila melanogaster Mip120 gene. These data suggest a previously unknown pleiotropic role for the Orco and Ir8a co-receptors in the coordination of expression of chemosensory receptors within the antennae of Ae. aegypti by participating in a feedback loop involving amos and members of the MMB/dREAM complex. Full article

High-precision indoor positioning technology is increasingly prominent in its application value in emerging fields such as the Industrial Internet of Things, smart cities, and autonomous driving. 5G networks can transmit large-bandwidth signals and have the capability to transmit and receive signals with multiple antennas, enabling the simultaneous acquisition of angle and distance observation information, providing a solution for high-precision positioning. Differences in the types and quantities of observation information in complex environments lead to positioning scenarios having a multimodal nature; how to propose an effective observation model that covers multimodal scenarios for high-precision robust positioning is an urgent problem to be solved. This paper proposes a three-stage time–frequency synchronization method based on group peak time sequence tracing. Timing coarse synchronization is performed through a group peak accumulation timing coarse synchronization algorithm for multi-window joint estimation, frequency offset estimation is based on cyclic prefixes, and finally, fine timing synchronization based on the primary synchronization signal (PSS) sliding cross-correlation is used to synchronize 5G signals to chip-level accuracy. Then, a tracking loop is used to track the Positioning Reference Signal (PRS) to within-chip accuracy, obtaining accurate distance information. After obtaining distance and angle information, a high-precision positioning method for multimodal scenarios based on 5G heterogeneous measurement combination is proposed. Using high-precision angle observation values as intermediate variables, this algorithm can still solve a closed-form positioning solution under sparse observation conditions, enabling the positioning system to achieve good positioning performance even with limited redundant observation information. Full article

To address the deployment accuracy issues of multi-frequency band reflector antennas, this study takes a hexagonal prism modular deployable antenna as an example and proposes an accuracy design method. This paper proposes a screw-theory-based sub-chain precision analysis method. This method constructs a virtual screw model of rod length errors and hinge gap errors. Based on geometric relationships, a multi-loop point position error model is established, and accuracy surfaces considering rod length errors and hinge gap are output using MATLAB R2024b. By outputting the relationship curves of single-rod errors relative to point errors, the linearized influence law of individual rods on precision is further elucidated. Simulation results demonstrate the reliability of the error modeling theory. Based on the established cost-effective precision model and the minimum point error, which is obtained by using the numerical iterative method, the optimal solution for error parameters is obtained. Full article

This paper presents a study on the repeatability of washing effects on two antenna-based sensors for breathing monitoring. One sensor is an embroidered meander antenna-based sensor integrated into a T-shirt, and the other is a loop antenna integrated into a belt. Both sensors were subjected to five washing cycles, and their performance was assessed after each wash. The embroidered meander antenna was specifically compared before and after washing to monitor a male volunteer’s different breathing patterns, that is, eupnea, apnea, hypopnea, and hyperpnea. Stretching tests were also conducted to evaluate the impact of mechanical deformation on sensor behavior. The results highlight the changes in sensor performance across multiple washes and stretching conditions, offering insights into the durability and reliability of these embroidered and loop antennas for practical applications in wearable health monitoring. The findings emphasize the importance of considering both washing and mechanical stress in the design of robust antenna-based sensors. Full article

In this paper, the uplink spectral efficiency performance of a massive MIMO system based on full-duplex relay communication is investigated in Rician fading channels. The relay station is equipped with a large number of antennas, while multiple source and destination nodes are located at both ends of the transceiver. Each source and destination node is equipped with a single antenna. The relay station adopts Maximum Ratio Combining/Maximum Ratio Transmission (MRC/MRT) and Equal Gain Combining/Equal Gain Transmission (EGC/EGT) schemes to perform linear preprocessing on the received signals. Approximate expressions for uplink spectral efficiency under both MRC/MRT and EGC/EGT schemes are derived, and the effects of antenna number, signal-to-noise ratio (SNR), and loop interference on spectral efficiency are analyzed. In addition, the impact of full-duplex and half-duplex modes on system performance is compared, and a hybrid relay scheme is proposed to maximize the total spectral efficiency by dynamically switching between full-duplex and half-duplex modes based on varying levels of loop interference. Finally, a novel power allocation scheme is proposed to maximize energy efficiency under given total spectral efficiency and peak power constraints at both the relay and source nodes. The results show that the impact of loop interference can be eliminated by using a massive receive antenna array, leading to the disappearance of inter-pair interference and noise. Under these conditions, the spectral efficiency of the system can be improved up to $2N$ times, while the transmission power of the user and relay nodes can be reduced to $1/N_{\mathrm{rx}}$ and $1/N_{\mathrm{tx}}$, respectively. Full article

Unmanned aerial vehicles (UAVs) are promising and powerful aerial platforms that can execute a variety of complex tasks. However, the increasing complexity of tasks and number of UAV nodes pose significant challenges for UAV sensing networks, such as limiting the spectral resources and increasing device complexity. A potential solution is to implement full-duplex (FD) technology in UAV sensor network transceivers. Although appropriate self-interference (SI) cancellation techniques have been employed in the digital domain, the amplitude of the signal of interest (SoI) is relatively small and can be obscured by SI, especially over longer distances. Moreover, the introduction of phase offsets when filtering measurement signals can lead to signal distortion, resulting in estimation errors in the measurement results. To address these issues, this paper presents a joint transmit (TX) and receive (RX) beamforming algorithm based on the penalty dual decomposition (PDD) algorithm, which considers the constraints of transmission power, reception power, and residual SI power. The simulation analyses demonstrate that with a limited number of antennas, the proposed joint TX-RX beamforming algorithm can effectively suppress SI by up to 140 dB, yielding high-precision measurements in UAV sensor networks without compromising the accuracy of the control signals. Compared with that of the traditional frequency-division duplex (FDD) mode, the measurement accuracy is not decreased; compared with those of the time-division duplex (TDD) mode, the distance and speed measurement accuracies of the UAVs are increased by 10 m and 1.5 m/s, respectively, in the FD mode because there is no interruption of the tracking loop and no continuous retracking in the FD mode. Full article

Global navigation satellite systems are the best means of navigation for dynamic platforms. However, interference, line-of-sight blockages, and multipath are destructive to receiver operations. Advanced receiver architectures like vector tracking loops have been shown to be more resilient in tracking during degraded signal environments and dynamic scenarios. Additionally, controlled reception pattern antennas can be used to steer the effective antenna gain pattern to resist interference. This work introduces algorithms for a software-defined radio that combines vector tracking loops with a phased antenna array to digitally steer beams for the amplification of signals of interest so that the effects of signal degradation and multipath can be reduced. The proposed receiver design was tested on dynamic live sky data in multipath-rich environments and compared against traditional scalar receivers with and without beamforming as well as robust commercial receivers. The results showed that beam steering receivers were obtaining the expected amplification and that the vector tracking with beam steering was able to provide better positioning and signal tracking performance than the other implemented software receivers and provide continuous measurements where the commercial receiver failed to track degraded signals. Full article

A novel dual-polarized 2D beam-steering antenna is proposed based on the reconfigurable double square loops (RDSLs). The antenna is composed of stacked patches with two ports and a beam-steering surface consisting of a 2 × 2 array of RDSLs. Varactor diodes are integrated on the inner square loop of the RDSL. The steerable radiation beam of the antenna can be continuously controlled by tuning four biasing voltages applied on the beam-steering surface for both polarizations. The experimental results show that the scanning ranges are up to ±32° for both ports in two principal planes. The proposed antenna has an average gain of 7.87 dBi with a fluctuation of less than 0.5 dB during 2D beam scanning. The cross-polarization is less than −20 dB, and the isolation between the two ports is greater than 20 dB. The proposed antenna has scannable beams for dual polarizations, stable gains, compact size, and a simple structure, which makes it a good candidate for wireless communication systems. Full article

In order to solve the testing and verification problems at the early development stage of a high-speed Maglev positioning and speed measurement system (MPSS), a hardware-in-the-loop (HIL) simulation platform is presented, which includes induction loops, transmitting antennas, a power driver unit, a simulator based on a field-programmable gate array (FPGA), a host computer, etc. This HIL simulation platform simulates the operation of a high-speed Maglev train and generates the related loop-induced signals to test the performance of a real ground signal processing unit (GSPU). Furthermore, an absolute position detection method based on Gray-coded loops is proposed to identify which Gray-coded period the train is in. A relative position detection method based on height compensation is also proposed to calculate the exact position of the train in a Gray-coded period. The experimental results show that the positioning error is only 2.58 mm, and the speed error is 6.34 km/h even in the 600 km/h condition. The proposed HIL platform also effectively simulates the three kinds of operation modes of high-speed Maglev trains, which verifies the effectiveness and practicality of the HIL simulation strategy. This provides favorable conditions for the development and early validation of high-speed MPSS. Full article