Search Results (126)

Titanium dioxide (TiO₂) is a wide-bandgap semiconductor material with broad application potential, known for its excellent photocatalytic performance, high chemical stability, low cost, and non-toxicity. These properties make it highly attractive for applications in photovoltaic energy, environmental remediation, and optoelectronic devices. For instance, TiO₂ is widely used as a photocatalyst for hydrogen production via water splitting and for degrading organic pollutants, thanks to its efficient photo-generated electron–hole separation. Additionally, TiO₂ exhibits remarkable performance in dye-sensitized solar cells and photodetectors, providing critical support for advancements in green energy and photoelectric conversion technologies. Boron-doped diamond (BDD) is renowned for its exceptional electrical conductivity, high hardness, wide electrochemical window, and outstanding chemical inertness. These unique characteristics enable its extensive use in fields such as electrochemical analysis, electrocatalysis, sensors, and biomedicine. For example, BDD electrodes exhibit high sensitivity and stability in detecting trace chemicals and pollutants, while also demonstrating excellent performance in electrocatalytic water splitting and industrial wastewater treatment. Its chemical stability and biocompatibility make it an ideal material for biosensors and implantable devices. Research indicates that the combination of TiO₂ nanostructures and BDD into heterostructures can exhibit unexpected optical and electrical performance and transport behavior, opening up new possibilities for photoluminescence and rectifier diode devices. However, applications based on this heterostructure still face challenges, particularly in terms of photodetector, photoelectric emitter, optical modulator, and optical fiber devices under high-temperature conditions. This article explores the potential and prospects of their combined heterostructures in the field of optoelectronic devices such as photodetector, light emitting diode (LED), memory, field effect transistor (FET) and sensing. TiO₂/BDD heterojunction can enhance photoresponsivity and extend the spectral detection range which enables stability in high-temperature and harsh environments due to BDD’s thermal conductivity. This article proposes future research directions and prospects to facilitate the development of TiO₂ nanostructured materials and BDD-based heterostructures, providing a foundation for enhancing photoresponsivity and extending the spectral detection range enables stability in high-temperature and high-frequency optoelectronic devices field. Further research and exploration of optoelectronic devices based on TiO₂-BDD heterostructures hold significant importance, offering new breakthroughs and innovations for the future development of optoelectronic technology. Full article

Rockfalls on railways are considered a natural disaster under the topic of landslides. It is an event that varies regionally due to landforms and climate. In addition to traffic density, the Karabük–Yenice railway line also passes through mountainous areas, river crossings, and experiences heavy seasonal rainfall. These conditions necessitate the implementation of proactive measures to mitigate risks such as rockfalls, tree collapses, landslides, and other geohazards that threaten the railway line. Undetected environmental events pose a significant threat to railway operational safety. The study aims to provide early detection of environmental phenomena using vibrations emitted through fiber optic cables. This study presents a real-time hazard detection system that integrates Distributed Acoustic Sensing (DAS) with a hybrid ensemble learning model. Using fiber optic cables and the Luna OBR-4600 interrogator, the system captures environmental vibrations along a 6 km railway corridor in Karabük, Türkiye. CatBoosting, Support Vector Machine (SVM), LightGBM, Decision Tree, XGBoost, Random Forest (RF), and Gradient Boosting Classifier (GBC) algorithms were used to detect the incoming signals. However, the Voting Classifier hybrid model was developed using SVM, RF, XGBoost, and GBC algorithms. The signaling system on the railway line provides critical information for safety by detecting environmental factors. Major natural disasters such as rockfalls, tree falls, and landslides cause high-intensity vibrations due to environmental factors, and these vibrations can be detected through fiber cables. In this study, a hybrid model was developed with the Voting Classifier method to accurately detect and classify vibrations. The model leverages an ensemble of classification algorithms to accurately categorize various environmental disturbances. The system has proven its effectiveness under real-world conditions by successfully detecting environmental events such as rockfalls, landslides, and falling trees with 98% success for Precision, Recall, F1 score, and accuracy. Full article

On-chip optical accelerometers can be a promising alternative to capacitive, piezo-resistive, and piezo-electric accelerometers in some applications due to their immunity to electromagnetic interference and high sensitivity, which allow for robust operation in electromagnetically noisy environments. This paper focuses on the characterization of an easy-to-fabricate tri-axial fiber-free optical MEMS accelerometer, which employs a simple assembly consisting of a light emitting diode (LED), a quadrant photodetector (QPD), and a suspended proof mass, measuring acceleration through light power modulation. This configuration enables simple readout circuitry without the need for complex digital signal processing (DSP). Performance modeling was conducted to simulate the LED’s irradiance profile and its interaction with the proof mass and QPD. Additionally, experimental tests were performed to measure the device’s mechanical sensitivity and validate the mechanical model. Lateral mechanical sensitivity is obtained with acceptable discrepancy from that obtained from FEA simulations. This work consolidates the performance of the design adapted and demonstrates the accelerometer’s feasibility for practical applications. Full article

Okra (Abelmoschus esculentus) is a tropical vegetable with high nutritional and economic value. Rich in fiber, vitamins (C, K, and B9), and minerals (magnesium, potassium, calcium, and iron), it contributes to food security in many tropical regions. Global production is estimated at 11.5 million tons in 2023, 62% of which will come from India. Nigeria, Mali, Sudan, Pakistan, and Côte d’Ivoire are also among the major producers. Given its economic importance, optimizing its growth through controlled methods such as greenhouse cultivation and light-emitting diode (LED) lighting is a strategic challenge. Energy-efficient LED horticultural lighting offers promising prospects, but each plant variety reacts differently depending on the light spectrum, intensity, and duration of exposure (photoperiod). This study evaluated the effects of different LED spectra on okra’s flowering after 30 days of growth using B (blue, 445 nm) and R (red, 660 nm) LED lights and red-blue alternating in a three-day cycle (R3B3) by alternating the photoperiod from 14 to 10 h. Outdoor and greenhouse conditions served as controls. The results show that the R3B3 treatment improves germination in terms of both speed and percentage. However, plant growth (height, stem diameter, and leaf area) remains higher in the control group. R3B3 and red light stimulate leaf and node development. Flowering occurs earlier in the control group (51 days) and later under LED, particularly blue (73 days). Fruit diameter after petal fall was also larger in the control group. These results confirm the sensitivity of okra to photoperiod and light quality, and highlight the potential of spectral and photoperiod manipulation to regulate flowering in controlled-environment agriculture. Full article

This investigation presents an overview of various optical biosensors utilized for the detection of cancer cells. It covers a comprehensive range of technologies, including surface plasmon resonance $\left(SPR\right)$ sensors, which exploit changes in refractive index $\left(RI\right)$ at the sensor surface to detect biomolecular interactions. Localized surface plasmon resonance $\left(LSPR\right)$ sensors offer high sensitivity and versatility in detecting cancer biomarkers. Colorimetric sensors, based on color changes induced via specific biochemical reactions, provide a cost-effective and simple approach to cancer detection. Sensors based on fluorescence work using the light emitted from fluorescent molecules detect cancer-specific targets with specificity and high sensitivity. Photonics and waveguide sensors utilize optical waveguides to detect changes in light propagation, offering real-time and label-free detection of cancer biomarkers. Raman spectroscopy-based sensors utilize surface-enhanced Raman scattering $\left(SERS\right)$to provide molecular fingerprint information for cancer diagnosis. Lastly, fiber optic sensors offer flexibility and miniaturization, making them suitable for in vivo and point-of-care applications in cancer detection. This study provides insights into the principles, applications, and advancements of these optical biosensors in cancer diagnostics, highlighting their potential in improving early detection and patient outcomes. Full article

The purpose of this study was to evaluate the bactericidal effect of 270 nm UV-C light-emitting diode (LED) light delivered through a newly designed prototype device with thin optical fiber against Enterococcus faecalis (E. faecalis). The prototype device, developed to integrate UV-C light into a thin optic fiber (diameter 124 µm) connected to a UV-C LED (Luminous Device; Sunnyvale, CA, USA) via a specialized double-lens system that focuses divergent light to achieve a 65 mm working distance and a numerical aperture of 0.22. E. faecalis, was cultured at 37 °C under aerobic conditions for 24 h. The UV-C LED optical fiber was positioned 10 mm above the bacterial culture prepared in the wells of a 96-well plate. The E. faecalis cells were exposed to UV-C irradiation for 0, 10, 30, 60, 90, 120 and 180 s. Following irradiation, the OD600 values were measured after incubation at 37 °C for an additional 24 h. The data were statistically analyzed using one-way ANOVA, followed by Tukey’s honestly significant difference (HSD) test at a significance level of 0.05. UV irradiation at 270 nm significantly reduced E. faecalis growth in a time-dependent manner (p < 0.05). No significant changes were observed at 0 and 10 s, while peak reductions occurred at 120 and 180 s, with effects beginning at 30 s and increasing over time. The 270 nm UV-C wavelength was highly effective in bactericidal action against E. faecalis. The custom-designed UV-C delivery system effectively integrated the light source into a thin optical fiber, allowing for efficient UV-C light transmission and demonstrating its potential for application in narrow spaces such as root canals. Full article

Over the last decade, the number of demonstrations of Tm-doped fiber lasers has increased rapidly thanks to the applications of 2 $\mathsf{\mu }$m fiber laser in sensing, surgery, and polymer processing. In the literature, there is plenty of evidence that increasing the output power and the efficiency of this class of fiber lasers is of interest to the scientific and industrial communities. This article presents a theoretical and experimental study on three possible pumping methods for a Tm-doped fiber laser: out-of-band pumping, using a semiconductor-based module emitting at 793 nm; in-band pumping, using an ad hoc homemade fiber laser emitting at 1600 nm; an intracavity configuration, in which in the pump light is generated within the laser cavity itself. This work demonstrates how applying alternative pumping methods does not lead to significant improvements in laser performance without first taking into account the losses introduced in the system when switching from a cladding-pumped to a core-pumped configuration. Full article

Optical techniques to study neuronal activity have greatly advanced the field of neuroscience over recent decades. Multichannel silicon-based recording probes combined with optical fibers allow for simultaneous recording and manipulation of neuronal activity that underpins cognitive processes and behavior. The recent development of neural probes incorporating organic light-emitting diodes (OLEDs) and photodiode-based organic photodetectors (OPDs) offer additional advantages of biocompatibility, ultra-small footprint, multifunctionality, and low cost. These developments are ushering in a new generation of devices that are ideal for the interrogation of neuronal activity in vitro and in vivo. In this review, we discuss recent progress in OLED- and OPD-based neural probes, their applications in the optical control of neuronal function, and current challenges and prospects for the future. Full article

The application of light-emitting diode (LED)-dependent photobiomodulation (PBM) in promoting post-tendon injury healing has been recently reported. Despite establishing a theoretical basis for ligament restoration through PBM, identifying effective LED wavelength combinations and ensuring safety in animal models remain unresolved challenges. In our previous study, we demonstrated that combined irradiation at 630 nm and 880 nm promotes cell proliferation and migration, which are critical processes during the early stage of tendon healing in human-derived tendon fibroblasts. Based on this, we hypothesized that 630/880 nm LED-based PBM might promote rapid healing during the initial phase of tendon healing, and we aimed to analyze the results after PBM treatment in a murine model. Migration kinetics were analyzed at two specific wavelengths: 630 and 880 nm. The Achilles tendon in the hind limbs of Balb/c mice was severed by Achilles tendon transection. Subsequently, the mice were randomized into LED non-irradiation and LED irradiation groups. Mice with intact tendons were employed as healthy controls. The total number of mice was 13 for the healthy and injured groups and 14 for the LED-irradiated injured group, and the data presented in this manuscript were obtained from one representative experiment (n = 4–5 per group). The wounds were LED-irradiated for 20 min daily for two days. Histological properties, tendon healing mediators, and inflammatory mediators were screened on day 14. The roundness of the nuclei and fiber structure, indicating the degree of infiltrated inflammatory cells and severity of fiber fragmentation, respectively, were lower in the LED irradiation group than in the LED non-irradiation group. Immunohistochemical analysis depicted an increase in tenocytes (SCX⁺ cells) and recovery of wounds with reduced fibrosis (lower collagen 3 and TGF-β1) in the LED irradiation group during healing; conversely, the LED non-irradiation group exhibited tissue fibrosis. Overall, the ratio of M2 macrophages to total macrophages in the LED irradiation group was higher than that in the injured group. LED-based PBM in the Achilles tendon rupture murine model facilitated a rapid restoration of histological and immunochemical outcomes. These findings suggest that LED-based PBM presents remarkable potential as an adjunct therapeutic approach for tendon healing and warrants further research to standardize various parameters to advance and establish it as a reliable treatment regimen. Full article

We propose a simple and innovative configuration consisting of a quantum dot and micro-optical resonator that emits single photons with good directionality in a plane parallel to the substrate. In this device, a single quantum dot is placed as a light source between the slits of a triangular split-ring micro-optical resonator (SRR) supported in an optical polymer film with an air-bridge structure. Although most of the previous single photon emitters in solid-state devices emitted photons upward from the substrate, operation simulations confirmed that this configuration realizes lateral light emission in narrow regions above, below, left, and right in the optical polymer film, despite the absence of a light confinement structure such as an optical waveguide. This device can be fabricated using silica-coated colloidal quantum dots, focused ion beam (FIB) lithography, and wet etching using an oxide layer on a silicon substrate as a sacrificial layer. The device has a large tolerance to the variation in the position of the SRR in the optical polymer film and the height of the air-bridge. We confirmed that Pt-SRRs can be formed on the optical polymer film using FIB lithography. This simple lateral photon emitter is suitable for coupling with optical fibers and for fabricating planar optical quantum solid-state circuits, and is useful for the development of quantum information processing technology. Full article

Using light-emitting diode (LED) in plant production optimizes growth with higher energy efficiency, reduces carbon footprint and resource consumption, and promotes more sustainable agriculture. However, the plants’ growth characteristics and biochemical composition may vary depending on the light’s wavelength, spectrum, and intensity. Therefore, LEDs as a light source have become a promising choice for improving cultivation efficiency, as they can modulate the spectrum to meet the needs of plants. Pereskia aculeata is a plant species from the cactus family with high protein, vitamins, minerals, and fiber. The objective of this study was to evaluate the effect of LED lighting on the cultivation of P. aculeata and its influence on biometric color and physicochemical aspects. Two treatments were carried out without the addition of artificial light: one inside the greenhouse (C-ins) and the other outside the greenhouse (C-out), and four treatments with LEDs in different spectral bands: monochromatic red (600–700 nm) (Red), monochromatic blue (400–490 nm) (Blue), white (400–700 nm) (White), and blue–red (1:1) (Blue–Red). The biometric characteristics and the color of the leaves collected from the different treatments were evaluated. After this, the leaves were dried, ground, and evaluated. The physicochemical and thermal characteristics, bioactive compounds, and antioxidant activity of the leaves from each treatment were described. The biometric characteristics were intensified with red LED, and the color of the leaves tended toward green. The dried yield was around 50%, except for C-out treatment. Regarding nutritional characteristics, the highest protein (29.68 g/100 g), fiber (34.44 g/100 g), ash (20.28 g/100 g), and lipid (3.44 g/100 g) contents were obtained in the treatment with red light. The red treatment also intensified the content of chlorophyll a (28.27 µg/L) and total carotenoids (5.88 µg/g). The blue treatment intensified the concentration of minerals and provided greater thermal stability. Regarding bioactive properties, the cultivation of P. aculeata inside the greenhouse favored the concentration of phenolic compounds and a greater antioxidant capacity. Therefore, the quality of light for P. aculeata demonstrates that the length of red and blue light corroborates the development of the plant through the wavelength absorbed by the leaves, favoring its characteristics and planting in closed environments. Full article

A sub-micron two-dimensional displacement sensor based on a segment of multi-core fiber is presented in this paper. Light at the wavelengths of 1520 nm, 1530 nm, and 1540 nm was introduced separately into three cores of a seven-core fiber (SCF). They were independently transmitted in their respective cores, and after being emitted from the other end of the SCF, they were irradiated onto the end-face of a single-mode fiber (SMF). The SMF received light at three different wavelengths, the power of which was related to the relative position between the SCF and the SMF. When the SMF moved within a two-dimensional plane, the direction of displacement could be determined based on the changes in power at different wavelengths. As a benefit of the high sensitivity of the spectrometer, the sensor could detect displacements at the sub-micron level. When the SMF was translated in 200 nm steps over a range from 5.2 μm to 6.2 μm, the sensitivities at the wavelengths of 1520 nm, 1530 nm, and 1540 nm were 0.34 dB/μm, 0.40 dB/μm, and 0.36 dB/μm, respectively. The two-dimensional displacement sensor proposed in this paper offers the advantages of high detection precision, simple structure, and ease of implementation. Full article

In the current investigation, a novel methodology was employed to assess iron powder as a recyclable and sustainable energy carrier. Concurrently, an examination of the modeling of iron powder ignition and the ensuing heat output from the burner was undertaken. The flame temperature was determined by examining the light intensity emitted by the particles as they melted, which is directly related to the particle’s cross-sectional area. An account of the characterization of the experimental procedure, validation, and calibration is presented. Through measurements, distinct one-to-one correlations have been established between the scales of flame combustion and the temperatures of particles of varying sizes of iron. Additionally, a theoretical model for the combustion of expanding particles, particularly iron, within the diffusion-limited regime has been rigorously developed. This model delves into the spectra acquired from particle flames within the burner, utilizing Partial Least Squares Regression (PLSR) and Principal Component Analysis (PCA). This study investigates the use of optical fiber spectroscopy to predict flame temperature and assess iron powder size. The aim was to investigate how different sizes of iron powder affect flame temperature and to create calibration models for non-destructive prediction. The study shows that smaller particles had an average temperature of 1381 °C while larger particles reach up to 1842 °C, demonstrating the significant impact of particle size on combustion efficiency. The results were confirmed using advanced statistical methods, including PLSR and PCA, with PCA effectively differentiating between particle sizes and PLSR achieving an R² value of 0.90 for the 30 µm particles. Full article

Microgreens have great potential for improving the nutritional value of human diets, as well as constituting a promising dietary option for preventing chronic disease. Light-emitting diodes (LEDs) are commercially used as a light source to improve the growth of microgreens, as well as nutrient and bioactive compound accumulation. Here, we provide the first report of the phenolic compound, chlorophyll and carotenoid pigment, and dietary fiber contents of red and green kale microgreens grown in a growth chamber under white LEDs combined with red or blue light. Significant differences in the response of phytocompounds between white light and its combination with blue or red LEDs were determined. These studies showed that a combination of white and blue LEDs positively influenced the accumulation of phenolic compounds, which consequently determined high antioxidant activity. On the contrary, the white LED lights were the most suitable for the accumulation of carotenoids and chlorophylls, including chlorophyll a and b, and Klason lignin. These results suggest that the use of a combination of white light with blue or red light can increase the concentration of phenolic compounds and dietary fiber in red and green kale microgreens and thus may enhance their health-promoting potential. Full article

This preclinical study was conducted to investigate the efficacy of interstitial PDT (i-PDT) for malignant gliomas arising deep within the brain, which are difficult to remove. C6 glioma cells were implanted into the basal ganglia of rats, and 3 weeks later, the second-generation photosensitizer talaporfin sodium (TPS) was administered intraperitoneally. Ninety minutes after administration, a prototype fine plastic optical fiber was punctured into the tumor tissue, and semiconductor laser light was irradiated into the tumor from a 2-mm cylindrical light-emitting source under various conditions. The brain was removed 24 h after the i-PDT and analyzed pathologically. The optical fiber was able to puncture the tumor center in all cases, enabling i-PDT to be performed. Histological analysis showed that tumor necrosis was induced in areas close to the light source, correlating with the irradiation energy dose, whereas apoptosis was induced at some distance from the light source. Irradiation using high energy levels resulted in tissue swelling from strong tumor necrosis, and irradiation at 75 J/cm² was most suitable for inducing apoptosis. An experimental system of i-PDT using TPS was established using malignant glioma cells transplanted into the rat brain. Tumor cell death, which correlated with the light propagation, was induced in tumor tissue. Full article