Search Results (33,348)

Autonomous vehicles and intelligent traffic transportation are widely investigated for road networks. Context-aware traffic light scheduling algorithms determine signal phases by analyzing the real-time characteristics and contextual information of competing traffic flows. The context of traffic flows mainly considers the existence of regular, emergency, or heavy vehicles. This is an important factor in setting the phases of the traffic light schedule and assigning a high priority for emergency vehicles to pass through the signalized intersection first. VANET technology, through its communication capabilities and the exchange of data packets among moving vehicles, is utilized to collect real-time traffic information for the analyzed road scenarios. This introduces an attractive environment for hackers, intruders, and criminals to deceive drivers and intelligent infrastructure by manipulating the transmitted packets. This consequently leads to the deployment of less efficient traffic light scheduling algorithms. Therefore, ensuring secure communications between traveling vehicles and verifying the integrity of transmitted data are crucial. In this work, we investigate the possible attacks on the integrity of transferred messages and vehicles’ identities and their effects on the traffic light schedules. Then, a new secure context-aware traffic light scheduling system is proposed that guarantees the integrity of transmitted messages and verifies the vehicles’ identities. Finally, a comprehensive series of experiments were performed to assess the proposed secure system in comparison to the absence of security mechanisms within a simulated road intersection. We can infer from the experimental study that attacks on the integrity of vehicles have different effects on the efficiency of the scheduling algorithm. The throughput of the signalized intersection and the waiting delay time of traveling vehicles are highly affected parameters. Full article

Background and Objectives: Periodontitis is a chronic inflammatory disease that leads to progressive destruction of periodontal tissues and remains a significant global health burden. While conventional therapies such as scaling and root planning offer short-term improvements, they often fall short in maintaining long-term microbial control, underscoring the need for adjunctive strategies. This study evaluated the clinical and microbiological effects of a novel essential oil (EO)-based gel—SmartGel OV—formulated with Origanum vulgare. Materials and Methods: Thirty adults with periodontitis were enrolled in a 4-month observational study, during which SmartGel OV was applied daily via gingival massage. Clinical outcomes and bacterial profiles were assessed through probing measurements and real-time PCR analysis. Additionally, a pilot AI-based tool was explored as a supplemental method to monitor inflammation progression through intraoral images. Results: Significant reductions were observed in Fusobacterium nucleatum and Capnocytophaga spp., accompanied by improvements in clinical markers, including probing depth, bleeding on probing, and plaque index. The AI framework successfully identified visual inflammation changes and supported early detection of non-responsiveness. Conclusions: SmartGel OV demonstrates promise as a natural adjunctive treatment for periodontitis and AI monitoring was included as an exploratory secondary tool to assess feasibility for future remote tracking. Full article

Autism Spectrum Disorder (ASD) remains significantly underdiagnosed in women, resulting in a persistent gender gap with important clinical, functional, and psychosocial implications. This narrative review explores the multifactorial barriers contributing to diagnostic disparities, including the male-oriented structure of current diagnostic criteria, the prevalence of co-occurring psychiatric conditions, and the phenomenon of social camouflaging shaped by culturally reinforced gender norms. These factors frequently lead to delayed identification, clinical misinterpretation, and suboptimal care. The review synthesizes evidence from clinical, psychological, and sociocultural research to demonstrate how the under-recognition of ASD in women impacts mental health outcomes, access to education, occupational stability, and overall quality of life. Special emphasis is placed on the consequences of missed or late diagnoses for healthcare delivery and the educational needs of clinicians involved in ASD assessment and care. This article concludes with actionable, evidence-based recommendations for enhancing diagnostic sensitivity, developing gender-responsive screening strategies, and integrating training on female autism presentation into medical and allied health education. Addressing these challenges is essential to reducing diagnostic inequities and ensuring timely, accurate, and person-centered care for autistic women throughout their lifespan. Full article

This paper presents a finite element simulation of thermal damage to a CCD caused by nanosecond multi-pulse laser exposure. The temperature changes in the CCD due to the laser pulses were simulated, and the time evolution of thermal damage was studied. The impacts of different laser parameters such as spot radius, pulse width, and repetition frequency on thermal damage were evaluated. The results indicated that the temperature of the CCD increased with each pulse due to cumulative effects, leading to thermal damage. A smaller laser spot size intensified the temperature rise, accelerating the rate at which different layers in the CCD exceeded the relative melting point of each material. In the case of nanosecond pulse width, variations in pulse width had minimal effects on CCD thermal damage when repetition frequency and average power density were constant. Lower repetition frequencies made it easier to cause melting damage to the CCD when pulse width and average power density were constant. Full article

Named Data Networking (NDN) represents a promising Information-Centric Networking architecture that addresses limitations of traditional host-centric Internet protocols by emphasizing content names rather than host addresses for communication. While NDN offers advantages in content distribution, mobility support, and built-in security features, its stateful forwarding plane introduces significant vulnerabilities, particularly Interest Flooding Attacks (IFAs). These IFA attacks exploit the Pending Interest Table (PIT) by injecting malicious interest packets for non-existent or unsatisfiable content, leading to resource exhaustion and denial-of-service attacks against legitimate users. This survey examines research advances in IFA detection and mitigation from 2013 to 2024, analyzing seven relevant published detection and mitigation strategies to provide current insights into this evolving security challenge. We establish a taxonomy of attack variants, including Fake Interest, Unsatisfiable Interest, Interest Loop, and Collusive models, while examining their operational characteristics and network performance impacts. Our analysis categorizes defense mechanisms into five primary approaches: rate-limiting strategies, PIT management techniques, machine learning and artificial intelligence methods, reputation-based systems, and blockchain-enabled solutions. These approaches are evaluated for their effectiveness, computational requirements, and deployment feasibility. The survey extends to domain-specific implementations in resource-constrained environments, examining adaptations for Internet of Things deployments, wireless sensor networks, and high-mobility vehicular scenarios. Five critical research directions are proposed: adaptive defense mechanisms against sophisticated attackers, privacy-preserving detection techniques, real-time optimization for edge computing environments, standardized evaluation frameworks, and hybrid approaches combining multiple mitigation strategies. Full article

Prostate cancer (PC) remains a leading cause of malignancy in men worldwide, with current diagnostic methods such as prostate-specific antigen (PSA) testing and tissue biopsies facing limitations in specificity, invasiveness, and ability to capture tumor heterogeneity. Liquid biopsy, especially analysis of circulating tumor DNA (ctDNA), has emerged as a transformative tool for non-invasive detection, real-time monitoring, and treatment selection for PC. This review examines the role of ctDNA in both localized and metastatic PCs, focusing on its utility in early detection, risk stratification, therapy selection, and post-treatment monitoring. In localized PC, ctDNA-based biomarkers, including ctDNA fraction, methylation patterns, fragmentation profiles, and mutations, demonstrate promise in improving diagnostic accuracy and predicting disease recurrence. For metastatic PC, ctDNA analysis provides insights into tumor burden, genomic alterations, and resistance mechanisms, enabling immediate assessment of treatment response and guiding therapeutic decisions. Despite challenges such as the low ctDNA abundance in early-stage disease and the need for standardized protocols, advances in sequencing technologies and multimodal approaches enhance the clinical applicability of ctDNA. Integrating ctDNA with imaging and traditional biomarkers offers a pathway to precision oncology, ultimately improving outcomes. This review underscores the potential of ctDNA to redefine PC management while addressing current limitations and future directions for research and clinical implementation. Full article

Inter-turn short-circuit faults in induction motors might lead to overheating, torque imbalances, and eventual motor failure. This paper presents a fault detection framework for accurately identifying ITSC faults under various operating conditions. The proposed method integrates negative-sequence current analysis utilizing wavelet-based filtering and symmetrical component decomposition. A fault detection index to effectively monitor motor health and detect faults is presented. Moreover, the fault location is determined by phase angles of fundamental components of negative-sequence currents. Experimental validations were carried out for an inverter-fed induction motor under variable speed and load cases. These showed that the proposed approach has high sensitivity to early-stage inter-turn short circuits. This makes the framework highly suitable for real-time condition monitoring and predictive maintenance in inverter-fed motor systems, thereby improving system reliability and minimizing unplanned downtime. Full article

To address the central cracking problem in continuous casting slabs of 38CrMoAl steel, high-temperature tensile tests were performed using a Gleeble-3800 thermal simulator to characterize the hot ductility of the steel within the temperature range of 600–1200 °C. The phase transformation behavior was computationally analyzed via the Thermo-Calc software, while the microstructure, fracture morphology, and precipitate characteristics were systematically investigated using a metallographic microscope (MM), a field-emission scanning electron microscope (FE-SEM), and transmission electron microscopy (TEM). Additionally, the effects of different holding times and cooling rates on the microstructure and precipitates of 38CrMoAl steel were also studied. The results show that the third brittle temperature region of 38CrMoAl steel is 645–1009 °C, and the fracture mechanisms can be classified into three types: (I) in the α single-phase region, the thickness of intergranular proeutectoid ferrite increases with rising temperature, leading to reduced hot ductility; (II) in the γ single-phase region, the average size of precipitates increases while the number density decreases with increasing temperature, thereby improving hot ductility; and (III) in the α + γ two-phase region, the precipitation of proeutectoid ferrite promotes crack propagation and the dense distribution of precipitates at grain boundaries causes stress concentration, further deteriorating hot ductility. Heat treatment experiments indicate that the microstructures of the specimen transformed under water cooling, air cooling, and furnace cooling conditions as follows: martensite + proeutectoid ferrite → bainite + ferrite → ferrite. The average size of precipitates first decreased, then increased, and finally decreased again with increasing holding time, while the number density exhibited the opposite trend. Therefore, when the holding time was the same, reducing the cooling rate could increase the average size of the precipitates and decrease their number density, thereby improving the hot ductility of 38CrMoAl steel. Full article

In the casting and rolling production process, surface longitudinal cracks are a typical casting defect. Tracing the causes of longitudinal cracks online and controlling the key parameters leading to their formation in a timely manner can enhance the stability of casting and rolling production. To this end, the influencing factors of longitudinal cracks were analyzed, a data integration storage platform was constructed, and a tracing model was established using empirical rule analysis, statistical analysis, and intelligent analysis methods. During the initial production phase of a casting machine, longitudinal cracks occurred frequently. The tracing results using the LightGBM-SHAP method showed that the relative influence of the narrow left wide inner heat flow ratio of the mold was significant, followed by the heat flow difference on the wide symmetrical face of the mold and the superheat of the molten steel, with weights of 0.135, 0.066, and 0.048, respectively. Based on the tracing results, we implemented online emergency measures. By controlling the cooling intensity of the mold, we effectively reduced the recurrence rate of longitudinal cracks. Root cause analysis revealed that the total hardness of the mold-cooling water exceeded the standard, reaching 24 mg/L, which caused scaling on the mold copper plates and uneven cooling, leading to the frequent occurrence of longitudinal cracks. After strictly controlling the water quality, the issue of longitudinal cracks was brought under control. The online application of the tracing method for the causes of longitudinal cracks has effectively improved efficiency in resolving longitudinal crack problems. Full article

Rapid data growth in large systems has introduced significant challenges in real-time monitoring and analysis. One of these challenges is detecting anomalies in time series data with high-dimensional inputs that contain complex inter-correlations between them. In addition, the lack of labeled data leads to the use of unsupervised learning that relies on daily system data to train models, which can contain noise that affects feature extraction. To address these challenges, we propose PCA-AAE, a novel anomaly detection model for time series data using an Adversarial Autoencoder integrated with Principal Component Analysis (PCA). PCA contributes to analyzing the latent space by transforming it into uncorrelated components to extract important features and reduce noise within the latent space. We tested the integration of PCA into the model’s phases and studied its efficiency in each phase. The tests show that the best practice is to apply PCA to the latent code during the adversarial training phase of the AAE model. We used two public datasets, the SWaT and SMAP datasets, to compare our model with state-of-the-art models. The results indicate that our model achieves an average F1 score of 0.90, which is competitive with state-of-the-art models, and an average of 58.5% faster detection speed compared to similar state-of-the-art models. This makes PCA-AAE a candidate solution to enhance real-time anomaly detection in high-dimensional datasets. Full article

Reliable estimates of aquifer properties are needed for groundwater resources management and for engineering applications. Pumping tests conducted in fractured aquifers using an open borehole may not produce a proper characterization of the aquifer properties leading to the failure of engineering solutions. In this work, we apply a radial flow model to reproduce the time drawdown curves recorded at an observation borehole instrumented with multi-level piezometers drilled in the Permo-Triassic sandstone, which is a complex fractured hydraulic unit. The radial flow model and the optimization code PEST are used to estimate the aquifer hydraulic parameter values. The model is then used to investigate the implications of replacing the multi-level piezometers with an open borehole. The results show that the open borehole does not only significantly alter the groundwater head and flow patterns around the borehole, but the analysis of the time drawdown curve obtained would produce estimates of aquifer properties that bear no relationship with the actual hydraulic properties of the aquifer. For engineering control studies, the pumping test must be carefully designed to account for the presence of fractures, and these must be represented in the analysis tools to ensure the correct characterization of the hydraulic system. Full article

Sensor selection in IoT-based smart healthcare systems is a complex fuzzy decision-making problem due to the presence of numerous uncertain and interdependent evaluation criteria. Traditional fuzzy multi-criteria decision-making (MCDM) approaches often assume independence among criteria and rely on aggregation operators that impose sharp transitions between preference levels. These assumptions can lead to decision outcomes with insufficient differentiation, limited discriminatory capacity, and potential issues in consistency and sensitivity. To overcome these limitations, this study proposes a novel fuzzy decision-making framework by integrating Quasi-D-Overlap functions into the fuzzy MARCOS (Measurement of Alternatives and Ranking According to Compromise Solution) method. Quasi-D-Overlap functions represent a generalized extension of classical overlap operators, capable of capturing partial overlaps and interdependencies among criteria while preserving essential mathematical properties such as associativity and boundedness. This integration enables a more intuitive, flexible, and semantically rich modeling of real-world fuzzy decision problems. In the context of real-time health monitoring, a case study is conducted using a hybrid edge–cloud architecture, involving sensor tasks such as heartrate monitoring and glucose level estimation. The results demonstrate that the proposed method provides greater stability, enhanced discrimination, and improved responsiveness to weight variations compared to traditional fuzzy MCDM techniques. Furthermore, it effectively supports decision-makers in identifying optimal sensor alternatives by balancing critical factors such as accuracy, energy consumption, latency, and error tolerance. Overall, the study fills a significant methodological gap in fuzzy MCDM literature and introduces a robust fuzzy aggregation strategy that facilitates interpretable, consistent, and reliable decision making in dynamic and uncertain healthcare environments. Full article

Fan growth serves as a critical performance indicator for the sustainable development of livestreaming e-commerce (LSE). However, existing research has paid limited attention to this topic. This study investigates the unique interactive advantages of LSE over traditional e-commerce by examining how interactivity drives fan growth through the mediating role of user retention and the moderating role of anchors’ facial attractiveness. To conduct the analysis, real-time data were collected from 1472 livestreaming sessions on Douyin, China’s leading LSE platform, between January and March 2023, using Python-based (3.12.7) web scraping and third-party data sources. This study operationalizes key variables through text sentiment analysis and image recognition techniques. Empirical analyses are performed using ordinary least squares (OLS) regression with robust standard errors, propensity score matching (PSM), and sensitivity analysis to ensure robustness. The results reveal the following: (1) Interactivity has a significant positive effect on fan growth. (2) User retention partially mediates the relationship between interactivity and fan growth. (3) There is a substitution effect between anchors’ facial attractiveness and interactivity in enhancing user retention, highlighting the substitution relationship between anchors’ personal characteristics and livestreaming room attributes. This research advances the understanding of interactivity’s mechanisms in LSE and, notably, is among the first to explore the marketing implications of anchors’ facial attractiveness in this context. The findings offer valuable insights for both academic research and managerial practice in the evolving livestreaming commerce landscape. Full article

Machining chromium–nickel alloy steel is challenging due to its material properties, such as high strength and toughness. These properties often lead to tool damage and degradation of tool life, which overall impacts the production time, cost, and quality of the product. Therefore, it is essential to investigate early signs of tool damage to determine the effective machining conditions for chromium–nickel alloy steel, thereby increasing tool life and improving product quality. In this study, the early signs of tool wear were observed in a physical vapor deposition (PVD) carbide-coated tool (Seco Tools, Björnbacksvägen, Sweden) during the machining of X5CrNi18-10 steel under both dry and wet conditions. A finish turning operation was performed on the outer diameter (OD) of the workpiece with a 0.4 mm nose radius tool. At the early stage, the tool was examined from the functional side (f–side) and the passive side (p–side). The results indicate that dry machining leads to increased coating removal, more heat generation, and visible damage, such as pits and surface scratches. By comparison, wet machining helps reduce heat and wear, thereby improving tool life and machining quality. These findings suggest that a coolant must be used when machining chromium–nickel alloy steel with a PVD carbide-coated tool. Full article

Red deer fat makes up approximately 7–10% of the animal’s weight and is not currently used. Regarding sustainability in the food industry, it is desirable to look for opportunities for its processing and use, not only in the food industry. The aim of this study is the enzymatic modification of red deer fat, leading to modification of its physicochemical properties, and the study of changes in phase transitions of modified fat, its structure, color, and texture. Hydrolysis was performed using sn-1,3-specific lipase at different water concentrations (10–30%) and reaction times (2–6 h). The results showed that there was a significant decrease in melting and crystallization temperatures with an increasing degree of hydrolysis, which was confirmed by differential scanning calorimetry. FTIR spectra revealed a decrease in the intensity of the ester bonds, indicating cleavage of triacylglycerols. Texture analysis of the modified fats confirmed a decrease in hardness of up to 50% and an increase in spreadability. The color parameter values remained within an acceptable range. The results show that enzymatic modification is an effective tool for targeted modification of red deer fat properties, and this expands the possibilities of its application in cosmetic matrices and food applications as functional lipids. Full article