Search Results (92)

This study presents a comprehensive case of green remodeling applied to a local fire station in Seoul, South Korea. The project aimed to improve energy performance through an integrated upgrade of passive systems (exterior insulation, high-performance windows, and airtightness) and active systems (electric heat pumps, energy recovery ventilation, and rooftop photovoltaic systems), while maintaining uninterrupted emergency operations. A detailed analysis of annual energy use before and after the remodeling shows a 44% reduction in total energy consumption, significantly exceeding the initial reduction target of 20%. While electricity use increased modestly during winter due to the electrification of heating systems, gas consumption dropped sharply by 63%, indicating a shift in energy source and improved efficiency. The building’s airtightness also improved significantly, with a reduction in the air change rate. The project further addressed unique challenges associated with continuously operated public facilities, such as insulating the fire apparatus garage and executing phased construction to avoid operational disruption. This study contributes valuable insights into green remodeling strategies for mission-critical public buildings, emphasizing the importance of integrating technical upgrades with operational constraints to achieve verified energy performance improvements. Full article

In the actual installation of cables, inclined cable laying within covered cable trays is a relatively common method. To investigate the effects of different tilt angles on the combustion behavior of cables within covered cable trays, aluminum conductor polyethylene-insulated power cables were used as the test cables. The flame morphology, temperature distribution, and fire spread rate during the cable combustion process were analyzed for experimental scenarios for which the cable laying angles and the ignition positions changed. The results indicate that the inclination angle of the covered cable tray has a significant impact on flame propagation and temperature distribution. For the ignition located at the lowest part of the cable, the fire spread rate increases significantly with the tilt angle. In contrast, for the ignition located at the highest part of the cable, the fire spread rate initially decreases slightly and then increases, with a relatively smaller overall change in magnitude. Under both ignition positions, the flame spread rate significantly increases at 15–30°. Therefore, in actual cable installation processes, cables within covered troughs should avoid large-angle inclinations. Full article

The insulation layer of flame-retardant cables plays a critical role in mitigating fire hazards by influencing toxic gas emissions and the accuracy of fire modeling. This study systematically explores the pyrolysis kinetics and volatile gas evolution of flame-retardant polyvinyl chloride (PVC) and polyethylene (PE) insulation materials using advanced TG-FTIR-GC/MS techniques. Distinct pyrolysis stages were identified through thermogravimetric analysis (TGA) at heating rates of 10–40 K/min, while the KAS model-free method and Málek fitting function quantified activation energies and reaction mechanisms. Results revealed that flame-retardant PVC undergoes two major stages: (1) dehydrochlorination, characterized by the rapid release of HCl and low activation energy, and (2) main-chain scission, producing aromatic compounds that contribute to fire toxicity. In contrast, flame-retardant PE demonstrates a more stable pyrolysis process dominated by random chain scission and the formation of a dense char layer, significantly enhancing its flame-retardant performance. FTIR and GC/MS analyses further highlighted distinct gas evolution behaviors: PVC primarily generates HCl and aromatic hydrocarbons, whereas PE releases olefins and alkanes with significantly lower toxicity. Additionally, the application of a classification and regression tree (CART) model accurately predicted mass loss behavior under various heating rates, achieving exceptional fitting accuracy (R² > 0.98). This study provides critical insights into the pyrolysis mechanisms of flame-retardant cable insulation and offers a robust data framework for optimizing fire modeling and improving material design. Full article

This study presents a novel water mist fire fighting system that integrates water mist sprays and water mist curtains, designed to achieve simultaneous fire suppression, thermal insulation, and smoke control. Three full-scale experiments were conducted under various fire scenarios, and the changes in fire behavior and heat release rate were examined to evaluate the effectiveness of the water mist system in extinguishing fires. Additionally, the spatiotemporal changes in ceiling temperature were monitored to assess the cooling and protective effects of the water mist. The thermal insulation capability of the system was also investigated by detecting the temperature distribution inside the tunnel. Moreover, the smoke conditions upstream and downstream of the tunnel were analyzed to evaluate the smoke-blocking performance of the water mist system. The findings demonstrate that the water mist fire fighting system is highly efficient in attenuating the fire and restricting its progression. Within the water mist spray section, the average ceiling temperature decreased exponentially during both the initial and steady burning phases across all tested fire scenarios. Nonetheless, the smoke-carrying capacity of the water mist spray is limited. Fortunately, the dispersed smoke was diluted by water mist, markedly enhancing visibility and mitigating the impact of smoke on tunnel illumination. Full article

Unfired bricks offer a sustainable alternative to traditional fired bricks by enabling the large-scale reuse of industrial, construction, and municipal wastes while significantly reducing energy consumption and greenhouse gas emissions. This review contributes to eliminating knowledge fragmentation by systematically organising stabiliser technologies, performance metrics, and sustainability indicators across a wide variety of unfired brick systems. It thus provides a coherent reference framework to support further development and industrial translation. Emphasis is placed on the role of stabilisers—including cement, lime, geopolymers, and microbial or bio-based stabilisers—in improving mechanical strength, moisture resistance, and durability. Performance data are analysed in relation to compressive strength, water absorption, drying shrinkage, thermal conductivity, and resistance to freeze–thaw and wet–dry cycles. The findings indicate that properly stabilised unfired bricks can achieve compressive strengths above 20 MPa and water absorption rates below 10%, with notable improvements in insulation and acoustic properties. Additionally, life-cycle comparisons reveal up to 90% reductions in CO₂ emissions and energy use relative to fired clay bricks. Despite technical and environmental advantages, broader adoption remains limited due to standardisation gaps and market unfamiliarity. The paper concludes by highlighting the importance of hybrid stabiliser systems, targeted certification frameworks, and waste valorisation policies to support the transition toward low-carbon, resource-efficient construction practices. Full article

In this paper, thermal and mechanical properties of ablative thermal protective material (TPM) as inhibitors for a free-standing propellant grain based on phenolic resin (PR) and acrylonitrile butadiene rubber (NBR) were investigated. NBR elastomerized PR composite, reinforced with chopped carbon fibers (CFs) (PR/NBR/CF), was prepared by homogenization of 90 parts by weight (PBW) PR in 100 PBW NBR (28 wt.% of acrylonitrile content). PR/NBR/CF composite was blended in two-roller open and closed mixers and in a twin-screw extruder. Carbon black, aluminum(III)-oxide, and fumed silica were added as promoters of thermal and mechanical properties of PR/NBR/CF. The structural analysis was studied using Fourier transform infrared spectroscopy (FT-IR). Thermal properties of the prepared PR/NBR/CF composite inhibitor were studied by ablation and firing tests, while a morphological analysis of the char layer formed after the ablation test was conducted via scanning electron microscopy (SEM). A low erosion rate of 2.00 × 10⁻⁴ m·s⁻¹ and high tensile strength and elongation at break of 6.7 MPa and 419.92%, respectively, indicate that the developed materials can be applied as a thermal insulation/inhibitor of free-standing rocket propellant grains. Bond strength between PR/NBR/CF composite and aluminized composite rocket propellant (ACRP), determined via a standard peel test, showed higher adhesion forces between the PR/NBR/CF composite and the ACRP compared to the cohesion between the ACRP molecular chains. Full article

Square steel tube (SST) columns are widely applied, and fire resistance is a critical issue in its design. Current research on the fire resistance of the SST column predominantly assumes that it is uniformly exposed to fire, ignoring the thermal insulation of the surrounding walls under actual fire conditions. The heat transfer and mechanical finite element model (FEM) for SST columns embedded in walls under an ISO 834 standard fire are established in this study, and the accuracy of the FEM is verified by existing experimental results. Subsequently, the wall effect on the temperature distribution and fire resistance of the SST columns exposed to fire is analyzed, the stress mechanisms of the SST column embedded in walls is investigated and further parametric analyses are performed. The results show that, for SST columns embedded in walls, the temperature rise rate of the wall-embedded region is significantly reduced, and the fire resistance is improved by 25.3% compared with the case of uniform exposure to fire. Under two fire conditions, the SST columns exhibit compressive bending failure, and when considering the wall effect, the uneven temperature distribution induces material strength eccentricity, causing the buckling direction to deviate toward the wall-thickness direction. Reducing the fire-resistive coating thickness of the wall-embedded region can mitigate the uneven stress distribution, thereby lowering construction costs while concurrently preserving fire resistance. Increasing the steel tube thickness can significantly improve the fire resistance, but the high steel strength and slenderness ratio result in the accelerated failure of the SST column when exposed to fire. Full article

Significant amounts of coal fly and bottom ash are generated globally each year, with especially large quantities of bottom ash accumulating in landfills. In this study, fly ash and bottom ash were used to create fire-resistant materials. A mix of 30 wt% gypsum, 9.5 wt% vermiculite, and 0.5 wt% polypropylene fibers was used, maintaining a constant water-to-solid ratio, with varying fly ash/bottom ash ratios (40/20, 30/30, and 20/40). The density, as well as various mechanical properties (compressive strength, flexural strength, and surface hardness), fire insulation capacity, and leaching behavior of both ashes were evaluated. When comparing the 40/20 and 20/40 compositions, a slight decrease in density was observed; however, compressive strength dropped drastically by 80%, while flexural strength decreased slightly due to the action of the polypropylene fibers, and fire resistance dropped by 8%. Neither of the ashes presented any environmental concerns from a leaching standpoint. Additionally, historical data from various materials with different wastes in previous works were used to train different machine learning models (random forest, gradient boosting, artificial neural networks, etc.). Compressive strength and fire resistance were predicted. Simple parameters (density, water/solid ratio and composition for compressive strength and thickness and the composition for fire resistance) were used as input in the models. Both regression and classification algorithms were applied to evaluate the models’ ability to predict compressive strength. Regression models for fire resistance reached r² up to about 0.85. The classification results for the fire resistance rating (FRR) showed high accuracy (96%). The prediction of compressive strength is not as good as the fire resistance prediction, but compressive strength classification reached up to 99% accuracy for some models. Full article

This study investigated the effectiveness of two lamination methods for integrating electrospun nanofiber membranes with woven nylon fabric for personal protective applications. The first method used a thermoplastic urethane (TPU) nonwoven adhesive, while the second method incorporated both the adhesive and a yarn, with the yarn embedding by sewing. Lamination with the TPU nonwoven adhesive slightly improved the adhesion between the nanofiber membrane and the nylon fabric. However, it decreased the air permeability, with the degree of the decrease depending on the areal density of the TPU adhesive. As the areal density of the TPU increased from 10 g/m² to 30 g/m², the air permeability decreased from 107.6 mm/s to 43.4 mm/s. The lamination resulted in a slight increase in the filtration efficiency for oil aerosol particles (0.3 µm, PM0.3, at a flow rate of 32 L/min) to 96.4%, with a pressure drop of 83 Pa. Embedding non-fusible yarns in the laminate increased the nanofiber/fabric adhesion and permeability. Still, the filtration efficiency and pressure drop were reduced to 74.4% and 38 Pa, respectively, due to numerous pinholes formed in the nanofiber layer during the sewing process. Conversely, incorporating fusible TPU yarns not only improved the interlayer adhesion by 175% compared to using TPU fabric adhesive alone but also increased the air permeability to 136.1 mm/s. However, the filtration performance (87.7%, 72 Pa) was slightly lower than that of the unlaminated nanofiber/fabric pack because the TPU yarns sealed the pinholes during lamination. Lamination embedded with hot-melt yarns provides a versatile approach for combining nanofiber membranes with conventional fabrics. It can be used to develop nanofiber-functionalized textiles for a wide range of applications, including fire protection, electrical insulation, sound absorption, filtration, marine applications, and more. Full article

Urbanization and population growth have heightened the need for sustainable, efficient building materials that combine acoustic and thermal insulation with environmental and economic sustainability. Sandwich composite panels have gained attention as versatile solutions, offering lightweight structures, high strength, and adaptability in construction applications. This study evaluates manual, semi-automatic, and automatic production methods, selecting the automatic process for its efficiency, precision, and suitability for large-scale production. Extensive characterization techniques, including field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), Differential Thermogravimetry (DTG), Differential Scanning Calorimetry (DSC), and flammability tests, were employed to evaluate the morphological, thermal, acoustic, and fire-resistant properties of the panels. The P200 sample, produced automatically, demonstrated high acoustic absorption in the mid–high frequencies (2000–4000 Hz), strong interlayer adhesion, and low thermal conductivity (2.75 W/mK), making it effective for insulation applications. The flammability tests confirmed compliance with EPA 1030 standards, with a low flame propagation rate (1.55 mm/s). The TGA-DTG and DSC analyses revealed the thermal stability of the panel’s components, with distinct degradation stages being observed for the polyurethane core and non-woven textile layers. The FE-SEM analysis revealed a compact and homogeneous structure with strong adhesion between the core and textile layers. These results highlight the potential of sandwich composites as eco-friendly, high-performance materials for modern construction. Full article

This study investigates the fire resistance capabilities of newly developed loose-fill thermal insulation materials crafted from annual plants such as wheat straw, corn stalk, and water reed. Three processing methodologies were employed: mechanical crushing (raw, size ≤ 20 mm), chemi-mechanical pulping (CMP) using 4% sodium hydroxide, and steam explosion (SE). An admixture of boric acid (8%) and tetraborate (7%) was added to all treated materials to enhance fire retardancy. The fire reaction characteristics of the insulation materials were assessed using a cone calorimeter measuring the key parameters like time to ignition, total heat release, heat release rate, and total smoke production. The findings indicate that nearly all tested insulation samples, apart from the raw and SE water reed, demonstrated fire resistance comparable to commercial cellulose insulation, surpassing the fire performance of various synthetic foams and composite materials. Furthermore, the single-flame source fire tests indicated that the developed insulation materials achieved a fire classification E, except for the SE water reed sample. Thus, the fire performance results approve the suitability of developed plant-based insulation materials for competing materials in building constructions. Full article

This study is dedicated to an in−depth analysis of the combustion characteristics of extruded polystyrene (XPS) as a building insulation material with the aim of accurately assessing its fire risk in the built environment. Innovatively, this research employed a cone calorimeter equipped with a self−designed insulating sample holder to conduct a systematic experimental study. Additionally, it performed a comprehensive analysis of the ignition characteristics, heat release rate, fire hazard, smoke release, and toxic gas emission of XPS materials. The experimental results revealed that the combustion behavior of XPS is influenced by multiple factors, including the content of flame retardants and external heat flux, which significantly affect the fire hazard of XPS. When the thermal radiation intensity escalates from 25 kW/m² to 55 kW/m², the peak heat release rate of XPS−B1 rises from 428 kW/m² to 535 kW/m², marking an increase of 25.00%. Conversely, the peak heat release rate of XPS−B2 surges from 348 kW/m² to 579 kW/m², reflecting a substantial increase of 66.38%. This research not only provides a solid theoretical foundation and detailed experimental data for the fire behavior of XPS materials but also holds significant practical importance for enhancing the fire safety of buildings. Overall, this research contributes to the scientific understanding of XPS insulation materials and supports the development of more effective fire prevention measures in construction. Full article

The use of traditional sealing materials in buildings poses a significant risk of fire and noise pollution. To address these issues, we propose a novel composite functional sealant designed to enhance fire safety and sound insulation. The sealant incorporates a unique four-component filler system consisting of carbon nanotubes (CNTs) decorated with layered double hydroxides (LDHs), ammonium dihydrogen phosphate (ADP), and artificial marble waste powder (AMWP), namely CLAA. The CNTs/LDHs framework provides structural support and enhances thermal stability, while the ADP layer acts as a protective barrier and releases non-combustible gases during combustion. AMWP particles contribute to sound insulation by creating impedance mismatches. The resulting composite functional sealant exhibits improved mechanical properties. In terms of flame retardancy, it boasts the lowest peak heat release rate (PHRR) of 224.83 kW/m² and total smoke release (TSR) of 981.14 m²/m², achieving the V-0 classification. Furthermore, its thermal degradation characteristics reveal a notably higher carbon residue rate. Additionally, the sound insulation capability has been significantly enhanced, with an average sound insulation level of 43.48 dB. This study provides a promising solution for enhancing the fire safety and acoustic properties of building sealing materials. Full article

The mature theory of safety assessment and system operation is crucial to ensure the safety and property of commuters under the tunnel fire condition, but the relationship between pollutants and the quality of the luminous environment is still the weakest link in this research area. To establish this close relation, this study adopted three different scaled experiments to investigate the pollutant-visibility model based on spectral analysis. The first scaled tunnel model fire experiment, conducted on a 20.5-m-long experimental platform, utilized three combustion sources to analyze the light attenuation of natural gas, PVC-insulated cables, and smoke cakes based on the APE index. Then the spectrum selective contrast experiment collected several typical spectral data from coloured transparent panels, and the compared results advocated that there is no much different impact on luminous environment with these combustion sources under smoky conditions. At last, the acrylic box pollutant experiment was conducted with different CO/NO₂ concentrations, and the results provided quantitative relationship between the light average attenuation rate and CO/NO₂ concentrations. The findings of this study could be able to further establish the connection between pollutants and safety evacuation, as well as ventilation and luminous environment by combining the relatively mature research of tunnel fire. Full article

In this study, different combinations of mycelium biocomposites (MBs) were developed using primary substrates sourced from the local agricultural, wood processing, and paper industries. The physicomechanical properties, thermal conductivity, and fire behavior were evaluated. The highest bending strength was achieved in composites containing waste fibers and birch sanding dust, with a strength competitive with that of synthetic polymers like EPS and XPS, as well as some commercial building materials. The lowest thermal conductivity was observed in hemp-based MB, with a lambda coefficient of 40 m·W·m⁻¹·K⁻¹, making these composites competitive with non-mycelium insulation materials, including synthetic polymers such as EPS and XPS. Additionally, MB exhibited superior fire resistance compared to various synthetic foams and composite materials. They showed lower peak heat release rates (134–243 k·W·m⁻²) and total smoke release (7–281 m²·m⁻²) than synthetic polymers, and lower total heat release (6–62 k·W·m⁻²) compared to certain wood composites. Overall, the mechanical and thermal properties, along with the fire performance of MB, support their potential as a sustainable alternative to petroleum-based and traditional composite materials in the building industry. Full article