Search Results (4,108)

TiO₂ nanoparticles were synthesized by a simple sol–gel route followed by high-temperature calcination at 800 °C, aiming to obtain an anatase-dominant reference photocatalyst with enhanced structural stability after severe thermal treatment. Raman spectroscopy and X-ray diffraction confirmed that anatase is the major crystalline phase, with only a minor rutile contribution after calcination at 800 °C. Nitrogen adsorption–desorption measurements revealed a narrow mesoporous contribution arising from interparticle voids and a relatively high specific surface area (108 m² g⁻¹) despite the severe thermal treatment, while electron microscopy showed nanometric primary particles assembled into compact agglomerates. Surface hydroxyl groups were identified by Fourier-transform infrared spectroscopy, consistent with sol–gel-derived TiO₂ systems. Diffuse reflectance UV–Vis spectroscopy combined with Kubelka–Munk and Tauc analysis yielded an optical band gap of 3.12 eV, typical of anatase TiO₂. Methylene blue (MB) was used as a probe molecule to evaluate photocatalytic activity under ultraviolet and visible light irradiation. Under UV illumination, degradation kinetics were governed by band-gap excitation and reactive oxygen species generation, whereas a slower but reproducible reference behavior under visible light was predominantly associated with surface-related effects and dye sensitization rather than intrinsic visible-light absorption. Overall, the results establish this anatase-dominant TiO₂ as a reliable high-temperature reference photocatalyst, retaining measurable activity after calcination at 800 °C and exhibiting UV-driven behavior as the dominant contribution. Full article

Due to the indiscriminate use of antimicrobial drugs in the treatment of infectious diseases, human pathogenic bacteria have developed resistance to many commercially available antibiotics. Medicinal plants such as Convolvulus arvensis represent a renewable resource for the development of alternative therapeutic agents. This study aimed to evaluate the antibacterial activity of silver nanoparticles (AgNPs) biosynthesized from C. arvensis against two clinical antibiotic-resistant bacterial isolates. The pathogenic isolates were identified as Staphylococcus aureus MRSA and Escherichia coli ESBL using 16S rRNA gene sequencing. Silver nanoparticles were synthesized via a green synthesis approach, and their physicochemical properties were characterized using UV–Vis spectroscopy, scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, zeta potential, and dynamic light scattering (DLS). The synthesized C. arvensis–AgNPs exhibited a surface plasmon resonance peak at 475 nm and predominantly spherical morphology with particle sizes ranging from 102.34 to 210.82 nm. FTIR analysis indicated the presence of O–H, C–O, C–N, C–H, and amide functional groups. The nanoparticles showed a zeta potential of −18.9 mV and an average hydrodynamic diameter of 63 nm. The antibacterial activity of the biosynthesized AgNPs was evaluated against methicillin-resistant S. aureus (MRSA and ATCC 29213) and E. coli (ESBL and ATCC 25922) using agar diffusion, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC) assays. Inhibition zones ranged from 10 to 13 mm, with MIC and MBC values of 12.5–25 µg/mL and 25–50 µg/mL, respectively. In addition, the nanoparticles exhibited antioxidant activity (DPPH assay, IC₅₀ = 0.71 mg/mL) and anti-inflammatory effects as determined by protein denaturation inhibition. No cytotoxic effects were observed in the MCF-7 cell line at the MIC level. These findings suggest that C. arvensis–AgNPs have potential as natural antimicrobial, antioxidant, and anti-inflammatory agents. Full article

Plastic pollution, particularly in marine environments, has become a major global concern; therefore, monitoring and controlling these contaminants is essential to safeguard ecosystem integrity and human health. This study evaluates the ability of Posidonia oceanica spheroids to incorporate and retain plastic debris, with a particular focus on microplastics (MPs). A total of 1300 spheroids were collected along the Latium coast (Central Italy); among these, 454 (34.9%) contained plastic debris, with an average of 3.1 items per spheroid. Overall, 1415 plastic items were extracted and identified. Based on size classification, 48.7% were microplastics, 29.6% mesoplastics, and 21.9% macroplastics. Plastic items mainly consisted of filaments (40.9 ± 12.6%) and fibers (21.5 ± 5.2%). Eleven different colors were recorded, with white (28.8 ± 9.1%), transparent (13.4 ± 6.0%), and black (11.1 ± 6.8%) being the most frequent. A strong correlation was observed between the number of plastic items contained in the spheroids and proximity to wastewater treatment plants, which are known sources of synthetic fibers. Fourier transform infrared spectroscopy (FTIR) identified a total of 15 polymer materials, with nylon (18.2 ± 11.0%) and polyethylene terephthalate (PET; 17.3 ± 7.2%) being the most abundant. Structural alterations observed in FTIR spectra, together with carbonyl index values, indicate that most MPs are of secondary origin, resulting from prolonged environmental degradation. These results demonstrate that P. oceanica spheroids effectively promote plastic trapping and highlight their potential as a simple and cost-effective monitoring tool for marine plastic pollution. Full article

White radish is a nutritious root vegetable that provides dietary fiber, essential vitamins and minerals, and a range of bioactive compounds. This study aimed to determine how steam and microwave blanching, pulsed electric field, ultrasound, osmotic dehydration with inulin or trehalose, and coating with spices such as turmeric or sweet paprika influence the characteristics of convective infrared dried white radish slices. To assess the effect of each pretreatment, moisture content, water activity, shrinkage, density, texture, color parameters, structural characteristics (SEM and µ-CT), vapor adsorption, thermal changes, and antioxidant properties were analyzed. Osmotic dehydration with inulin most effectively limited shrinkage and color change, stabilized the microstructure, and resulted in the highest relative phenolic content and antioxidant activity (TPC, DPPH). Spice-coated samples showed low shrinkage, low hardness and breaking work, and vivid color. Furthermore, µ-CT microstructure analysis showed that these samples had the highest porosity, with those with paprika reaching 57.5%. In contrast, blanching, ultrasound, and PEF led to greater structural changes and increased hygroscopicity. Multivariate analyses confirmed the significant influence of the type of pre-treatment on the quality characteristics of the dried material. Osmotic dehydration and spice coating proved to be the most effective methods for obtaining structurally stable and visually attractive dried white radish slices with attractive bioactive compounds. Full article

Background/Objectives: Near-infrared photoimmunotherapy (NIR-PIT) represents a treatment approach for patients with locally advanced or recurrent head and neck cancers who are unsuitable for surgery post-standard therapy. Since its introduction in Japan in January 2021, NIR-PIT has been available exclusively under the national health insurance system, resulting in limited real-world clinical practice data. This study evaluated the association between NIR-PIT and overall survival (OS) in clinical practice. Methods: This single-center retrospective study included 45 patients with head and neck cancer who were not amenable to surgical resection owing to advanced local disease or regional recurrence without distant metastasis and who underwent NIR-PIT or systemic pharmacotherapy between January 2021 and April 2025. The primary endpoint was OS. Results: Twenty-two and 23 patients received NIR-PIT and pharmacotherapy, respectively. In the NIR-PIT group, irradiation was delivered to primary tumors in 20 patients, cervical lymph node lesions in one, and both primary and lymph node lesions in one. The median OS was 35 and 8 months, with median follow-up of 40 and 49 months in the NIR-PIT and pharmacotherapy groups, respectively. Among the NIR-PIT-eligible patients, 22 and 10 were treated with NIR-PIT and pharmacotherapy, respectively. The median OS was 35 and 8 months, with median follow-up of 40 and 24 months in the NIR-PIT and pharmacotherapy groups, respectively. Conclusions: NIR-PIT was independently associated with improved OS in patients with unresectable recurrent or metastatic head and neck cancer without distant metastasis. Prospective multicenter studies are warranted to validate these findings. Full article

Background: Solid organ transplantation (SOT) is a life-saving treatment for patients with end-stage diseases and/or organ failure. However, access to healthy organs is often limited by challenges in organ preservation. Furthermore, upon transplantation, ischemia–reperfusion injury (IRI) can lead to increased organ rejection or graft failures. The work presented aims to address both challenges using an innovative nanomedicine platform for simultaneous drug and oxygen delivery. In recent studies, resveratrol (RSV), a natural antioxidant, anti-inflammatory, and reactive oxygen species (ROS) scavenging agent, has been reported to protect against IRI by inhibiting ferroptosis. Here, we report the design, development, and scalable manufacturing of the first-in-class dual-function perfluorocarbon-nanoemulsion (PFC-NE) perfusate for simultaneous oxygen and antioxidant delivery, equipped with a near-infrared fluorescence (NIRF) reporter, longitudinal, non-invasive NIRF imaging of perfusate flow through organs/tissues during machine perfusion. Methods: A Quality-by-Design (QbD)-guided optimization was used to formulate a triphasic PFC-NE with 30% w/v perfluorooctyl bromide (PFOB). Drug-free perfluorocarbon nanoemulsions (DF-NEs) and RSV-loaded nanoemulsions (RSV-NEs) were produced at 250–1000 mL scales using M110S, LM20, and M110P microfluidizers. Colloidal attributes, fluorescence stability, drug loading, and RSV release were evaluated using DLS, NIRF imaging, and HPLC, respectively. PFC-NE oxygen loading and release kinetics were evaluated during perfusion through the BMI OrganBank^® machine with the MEDOS HILITE^® oxygenator and by controlled flow of oxygen. The in vitro antioxidant activity of RSV-NE was measured using the oxygen radical scavenging antioxidant capacity (ORAC) assay. The cytotoxicity and ferroptosis inhibition of RSV-NE were evaluated in RAW 264.7 macrophages. Results: PFC-NE batches maintained a consistent droplet size (90–110 nm) and low polydispersity index (<0.3) across all scales, with high reproducibility and >80% PFOB loading. Both DF-NE and RSV-NE maintained colloidal and fluorescence stability under centrifugation, serum exposure at body temperature, filtration, 3-month storage, and oxygenation. Furthermore, RSV-NE showed high drug loading and sustained release (63.37 ± 2.48% at day 5) compared with the rapid release observed in free RSV solution. In perfusion studies, the oxygenation capacity of PFC-NE consistently exceeded that of University of Wisconsin (UW) solution and demonstrated stable, linear gas responsiveness across flow rates and FiO₂ (fraction of inspired oxygen) inputs. RSV-NE displayed strong antioxidant activity and concentration-dependent inhibition of free radicals. RSV-NE maintained higher cell viability and prevented RAS-selective lethal compound 3 (RSL3)-induced ferroptosis in murine macrophages (macrophage cell line RAW 264.7), compared to the free RSV solution. Morphological and functional protection against RSL3-induced ferroptosis was confirmed microscopically. Conclusions: This study establishes a robust and scalable PFC-NE platform integrating antioxidant and oxygen delivery, along with NIRF-based non-invasive live monitoring of organ perfusion during machine-supported preservation. These combined features position PFC-NE as a promising next-generation acellular perfusate for preventing IRI and improving graft viability during ex vivo machine perfusion. Full article

This study investigates the design of bio-hybrid sandwich composites by combining polyester/glass skins with cores reinforced by continuous Musa paradisiaca fibres. The aim is to quantify how fibre weight fraction and alkaline surface treatment control the Charpy impact performance of these systems. Sandwich laminates were manufactured with three fibre loadings in the core (20, 25 and 30 wt.%), using fibres in the as-received condition and after alkaline treatment in NaOH solution. Charpy impact specimens were machined from the laminates and tested according to ISO 179-1. Fibre morphology and fracture surfaces were examined by scanning electron microscopy, while Fourier-transform infrared spectroscopy was used to monitor changes in surface chemistry after alkaline treatment. The combined effect of fibre content and treatment on absorbed energy was assessed through a two-way analysis of variance. Increasing Musa paradisiaca fibre content up to 30 wt.% enhanced the impact energy of the sandwich composites, and alkaline treatment further improved performance by strengthening fibre–matrix adhesion and promoting fibre pull-out, crack deflection and bridging mechanisms. The best Charpy impact response was obtained for cores containing 30 wt.% NaOH-treated fibres, demonstrating that surface modification and optimised fibre loading are effective design parameters for toughening polyester/glass bio-hybrid sandwich composites. Full article

One of the main challenges facing the pharmaceutical industry today is the low solubility of active pharmaceutical ingredients (APIs), which leads to low bioavailability, reduced therapeutic efficacy, and the need for higher drug doses. Eutectic solvents (ES) offer a promising solution by effectively dissolving APIs, creating API-ES systems that can significantly improve drug solubility and delivery. In this study, three distinct ESs were prepared by combining various components, with their successful formation confirmed through Fourier Transform Infrared Spectroscopy. Key physicochemical properties, including the density, viscosity, and pH of the prepared solvents, were subsequently determined. Ceritinib (CRT), an API utilized in the treatment of non-small cell lung cancer, was then incorporated into the prepared ESs to yield the API-ES systems. A comparative analysis was conducted to assess the release profiles of pure CRT versus CRT within the API-ES systems. Furthermore, the permeability and diffusion coefficient of the drug within these systems were also determined. The results conclusively demonstrated that the formation of the API-ES system increased the solubility of CRT in water. This achievement represents a vital initial step toward optimizing the delivery of this drug and highlights the significant potential for developing a novel, improved pharmaceutical formulation. Full article

The extensive consumption of freshwater resources and the continuous discharge of pharmaceutical residues pose serious risks to aquatic ecosystems and public health. In this study, pristine ZnO, TiO₂, Zn@TiO₂, and Ti@ZnO nanocomposites were synthesized via a precipitation-assisted solid–liquid interference method and systematically evaluated for the photocatalytic degradation of the antibiotic levofloxacin under UV and visible light irradiation. The structural, optical, and surface properties of the synthesized materials were characterized using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), UV–visible diffuse reflectance spectroscopy (UV–DRS), and X-ray photoelectron spectroscopy (XPS). XRD analysis confirmed the crystalline nature of all samples, while SEM images revealed spherical and agglomerated morphologies. Photocatalytic experiments were conducted using a 50-ppm levofloxacin solution with a catalyst dosage of 1 g L⁻¹. Pristine ZnO exhibited limited visible-light activity (33.81%) but high UV-driven degradation (92.98%), whereas TiO₂ showed comparable degradation efficiencies under UV (78.6%) and visible light (78.9%). Notably, Zn@TiO₂ nanocomposites demonstrated superior photocatalytic performance, achieving over 90% and near 70% degradation under both UV and visible light, respectively, while Ti@ZnO composites exhibited less than 60% degradation. The enhanced activity of Zn@TiO₂ is attributed to improved interfacial charge transfer, suppressed electron–hole recombination, and extended light absorption. These findings highlight Zn@TiO₂ nanocomposites as promising photocatalysts for efficient treatment of pharmaceutical wastewater under dual-light irradiation. Full article

Next-generation therapeutic devices will rely on an intelligent integrated system that consolidates multiple functions into a single platform. These individual chemical components exhibit diverse physicochemical properties, demonstrating multifunctional characteristics. In this review, we focus on how the distinctive properties of upconversion nanoparticles (UCNPs), achieved via refined preparation methods, unlock novel functionalities in biomedical applications. Specifically, features such as near-infrared excitation, deep-tissue penetration, low autofluorescence, and tunable multicolor emission endow UCNPs with substantial potential in fields including deep-tissue imaging, targeted drug delivery, and photodynamic therapy. This article systematically reviews recent advances in the design and functionalization of UCNPs, elucidating their role in facilitating the development of integrated diagnostic and therapeutic platforms and fostering the establishment of intelligent responsive treatment systems. Finally, we address current technical challenges—including uniformity in large-scale production, long-term biosafety, and in vivo metabolic mechanisms—and provide insights into future interdisciplinary integration, clinical translation pathways, and their potential role in personalized medicine. Full article

Introduction: Massage therapy delivers structured mechanosensory input that can influence brain function, yet the central mechanisms and potential for neuroplastic change have not been synthesized across neuroimaging modalities. This mechanistic review integrates evidence from electroencephalography (EEG), functional MRI (fMRI), and functional near-infrared spectroscopy (fNIRS) to map how massage alters human brain activity acutely and over time and to identify signals of longitudinal adaptation. Materials and Methods: We conducted a scoping, mechanistic review informed by PRISMA/PRISMA-ScR principles. PubMed/MEDLINE, Cochrane Library, Google Scholar, and ResearchGate were queried for English-language human trials (January 1990–July 2025) that (1) delivered a practitioner-applied manual massage (e.g., Swedish, Thai, shiatsu, tuina, reflexology, myofascial techniques) and (2) measured brain activity with EEG, fMRI, or fNIRS pre/post or between groups. Non-manual stimulation, structural-only imaging, protocols, and non-English reports were excluded. Two reviewers independently screened and extracted study, intervention, and neuroimaging details; heterogeneity precluded meta-analysis, so results were narratively synthesized by modality and linked to putative mechanisms and longitudinal effects. Results: Forty-seven studies met the criteria: 30 EEG, 12 fMRI, and 5 fNIRS. Results: Regarding EEG, massage commonly increased alpha across single sessions with reductions in beta/gamma, alongside pressure-dependent autonomic shifts; moderate pressure favored a parasympathetic/relaxation profile. Connectivity effects were state- and modality-specific (e.g., reduced inter-occipital alpha coherence after facial massage, preserved or reorganized coupling with hands-on vs. mechanical delivery). Frontal alpha asymmetry frequently shifted leftward (approach/positive affect). Pain cohorts showed decreased cortical entropy and a shift toward slower rhythms, which tracked analgesia. Somatotopy emerged during unilateral treatments (contralateral central beta suppression). Adjuncts (e.g., binaural beats) enhanced anti-fatigue indices. Longitudinally, repeated programs showed attenuation of acute EEG/cortisol responses yet improvements in stress and performance; in one program, BDNF increased across weeks. In preterm infants, twice-daily massage accelerated EEG maturation (higher alpha/beta, lower delta) in a dose-responsive fashion; the EEG background was more continuous. In fMRI studies, in-scanner touch and reflexology engaged the insula, anterior cingulate, striatum, and periaqueductal gray; somatotopic specificity was observed for mapped foot areas. Resting-state studies in chronic pain reported normalization of regional homogeneity and/or connectivity within default-mode and salience/interoceptive networks after multi-session tuina or osteopathic interventions, paralleling symptom improvement; some task-based effects persisted at delayed follow-up. fNIRS studies generally showed increased prefrontal oxygenation during/after massage; in motor-impaired cohorts, acupressure/massage enhanced lateralized sensorimotor activation, consistent with use-dependent plasticity. Some reports paired hemodynamic changes with oxytocin and autonomic markers. Conclusions: Across modalities, massage reliably modulates central activity acutely and shows convergent signals of neuroplastic adaptation with repeated dosing and in developmental windows. Evidence supports (i) rapid induction of relaxed/analgesic states (alpha increases, network rebalancing) and (ii) longer-horizon changes—network normalization in chronic pain, EEG maturation in preterm infants, and neurotrophic up-shifts—consistent with trait-level recalibration of stress, interoception, and pain circuits. These findings justify integrating massage into rehabilitation, pain management, mental health, and neonatal care and motivate larger, standardized, multimodal longitudinal trials to define dose–response relationships, durability, and mechanistic mediators (e.g., connectivity targets, neuropeptides). Full article

Vehicle exhaust gases remain one of the key sources of atmospheric air pollution and pose a serious threat to ecosystems and public health. This study presents an experimental investigation into reducing the toxicity of gasoline internal combustion engine exhaust using ultrasonic waves and infrared (IR) laser exposure. An original hybrid system integrating an ultrasonic emitter and an IR laser module was developed. Four operating modes were examined: no treatment, ultrasound only, laser only, and combined ultrasound–laser treatment. The concentrations of CH, CO, CO₂, and O₂, as well as exhaust gas temperature, were measured at idle and under operating engine speeds. The experimental results show that ultrasound provides a substantial reduction in CO concentration (up to 40%), while IR laser exposure effectively decreases unburned hydrocarbons CH (by 35–40%). The combined treatment produces a synergistic effect, reducing CH and CO by 38% and 43%, respectively, while increasing the CO₂ fraction and decreasing O₂ content, indicating more complete post-oxidation of combustion products. The underlying physical mechanisms responsible for the purification were identified as acoustic coagulation of particulates, oxidation, and photodissociation of harmful molecules. The findings support the hypothesis that combined ultrasonic and laser treatment can enhance real-time exhaust gas purification efficiency. It is demonstrated that physical treatment of the gas phase not only lowers the persistence of by-products but also promotes more complete oxidation processes within the flow. Full article

Background/Objectives: Urinary incontinence (UI) is a prevalent health condition with a negative impact on quality of life (QoL). Exercise therapy (ET), specifically, pelvic floor muscle training (PFMT), is recommended as a first-line conservative treatment for UI during pregnancy, childbirth, and the postpartum period. This study evaluated the effects of ET on the management of postpartum UI. Methods: A systematic search was conducted to identify clinical trials and randomized controlled trials including women over 18 years with postpartum UI. All included studies used ET as the main intervention. Studies were excluded if UI symptoms were attributable to factors outside the urinary tract or if participants had concomitant pathologies. Results: From 298 records screened, four trials were included. Three trials reported statistically significant improvements in UI outcomes, while findings for pelvic floor function and QoL showed greater heterogeneity. One trial found that supervised PFMT was associated with greater improvements in urinary symptoms (BFLUTS), vaginal pressure (18.96 mmHg (SD: 9.08)), and endurance (11.32 s (SD: 3.17)) compared to unsupervised training. Another trial using electromyographic biofeedback with electrical stimulation reported a continence rate exceeding 70% on the 20 min pad test, with improvements in perceived burden (VAS), symptoms (UDI), and QoL (IIQ). A third trial combining PFMT with infrared physiotherapy showed improvements in pelvic floor function (PFIQ-7, PFDI-20), urodynamic parameters, urine loss, and QoL (GQOLI-74). In the remaining trial, within-group improvements were observed, with no statistically significant between-group differences. Conclusions: ET appears to be beneficial for postpartum UI, with a moderate certainty of evidence. While the greatest benefits are observed with supervised PFMT, the diversity of comparators, and the risk of performance bias limit definitive conclusions regarding its superiority. Given the short-term follow-up, it remains unclear whether the results are influenced by the spontaneous recovery trajectory in the postpartum period and if these effects are sustained in the long term. Full article

Topaz is one of the most economically important fluorine-rich nesosilicates, which are predominantly colorless in natural crystals. Hence, the trade relies almost entirely on irradiated blue topaz with an unstable color center, which has been shown to fade over time. The cobalt (Co) diffusion treatment is a stable alternative process for converting colorless topaz to blue by a solid-state diffusion mechanism. To investigate the potential role of Co²⁺ substitution in the formation of the blue layer and the coupled behavior of F/OH dehydroxylation in facilitating this process, systematic diffusion treatments have been successfully conducted and compared. In this study, gem-quality topazes were annealed in air at 1000 °C for 20–40 h (hr) along with CoO, Fe₂O₃, Cr₂O₃, and CuO powders. The diffused products were characterized using Scanning Electron Microscope (SEM), Ultraviolet-Visible absorption spectroscopy (UV-Vis), Near-Mid Infrared spectroscopy (NMIR), and X-ray photoelectron spectroscopy (XPS). Parallel runs with CuO, Fe₂O₃, or Cr₂O₃ alone confirmed that none of these oxides produces a stable blue layer, underscoring the unique role of Co. The Co-diffused sample displays an intense blue layer characterized by a Co²⁺ octahedral isomorphism triplet at 540, 580, and 630 nm, which are absent from both untreated and heat-only controls. XPS analysis reveals the emergence of Co²⁺ (binding energy: 780.63 eV) and a concomitant depletion in F⁻, along with the disappearance of the OH overtone absorption at 7123 cm⁻¹. These observations confirm that defluorination generates octahedral vacancies accommodated by the coupled substitution: CoF₂ (solid reactant) + (AlO₂)⁻ (fragment of topaz structure) → AlOF (solid product) + (CoOF)⁻ (fragment of topaz structure). Prolonged annealing leads to decreased relative atomic percentages of K⁺ and F⁻ ions, consistent with volatilization losses during the high-temperature process, thereby directly correlating color intensity with cobalt valence state, which transfers from Co²⁺ to Co³⁺. These findings establish a Co-incorporation chronometer for F–rich aluminosilicate systems, with an optimal annealing time of approximately 20 hr at 1000 °C. Furthermore, the above results demonstrate that the color mechanism in nesosilicate gems is simultaneously governed by volatile release and cation availability. Full article

This study investigated the effects of alkaline pretreatment and drying methods on the physicochemical properties of Gelidium amansii and the quality of the resulting agar jelly. Seaweeds with or without alkaline pretreatment were subjected to either sun-drying or shortwave infrared (SWIR) lamp-drying for three or seven cycles to evaluate whether SWIR drying could replace conventional sun-drying by reducing drying time and whether alkaline pretreatment could enhance gel hardness. The results showed that both drying methods effectively reduced moisture content, while the alkaline pretreatment significantly increased the ash content, likely due to the removal of water-soluble components. Marked color improvement was observed after seven cycles of sun-drying or following alkaline pretreatment, with the appearance changing from purplish red to bright golden yellow, which is closer to traditional quality expectations. Although SWIR lamp-drying was more energy-efficient, it resulted in limited color improvement. Volatile compound analysis revealed that deviations from the fresh control increased with the number of sun-drying cycles, whereas alkaline pretreatment and infrared-drying induced more pronounced changes in volatile profiles. Among all of the treatments, Gelidium subjected to seven sun-drying cycles produced jellies with the most favorable texture, indicating enhanced agar gel formation through repeated washing and drying. In contrast, the combination of alkaline pretreatment and infrared-drying restricted agar extraction, likely due to tissue hardening and insufficient light intensity, resulting in weak or negligible gel formation. Overall, both the drying method and alkaline pretreatment significantly influenced the Gelidium quality and agar gel properties; despite being labor-intensive, traditional washing and sun-drying processes remain critical for achieving desirable product quality. Full article