Search Results (302)

This paper presents a bionic dual-fin underwater robot, inspired by the ocean sunfish, that achieves multiple swimming motions using only two vertically arranged fins. This work demonstrates that a mechanically simple platform can execute complex 2-D and 3-D motions through advanced control strategies, eliminating the need for auxiliary actuators. We control the two fins independently so that they can perform cooperative actions in the water, enabling the robot to perform various motions, including high-speed cruising, agile turning, controlled descents, proactive ascents, and continuous spiraling. The swimming performance of the dual-fin robot in executing multi-modal locomotion is experimentally analyzed through visual measurement methods and onboard sensors. Experimental results demonstrate that a minimalist dual-fin propulsion system of the designed ocean sunfish robot can provide speed (maximum cruising speed of 1.16 BL/s), stability (yaw amplitude less than 4.2°), and full three-dimensional maneuverability (minimum turning radius of 0.89 BL). This design, characterized by its simple structure, multiple motion capabilities, and excellent motion performance, offers a promising pathway for developing robust and versatile robots for diverse underwater applications. Full article

This work systematically addresses the dual challenges of non-inertial dynamic coupling and kinematic constraint redundancy encountered in dynamic modeling of serial–parallel–serial hybrid robotic mechanisms, and proposes an improved Newton–Euler modeling method with constraint compensation. Taking the Skiing Simulation Platform with 6-DOF as the research mechanism, the inverse kinematic model of the closed-chain mechanism is established through $G_F$ set theory, with explicit analytical expressions derived for the motion parameters of limb mass centers. Introducing a principal inertial coordinate system into the dynamics equations, a recursive algorithm incorporating force/moment coupling terms is developed. Numerical simulations reveal a 9.25% periodic deviation in joint moments using conventional methods. Through analysis of the mechanism’s intrinsic properties, it is identified that the lack of angular momentum conservation constraints on the end-effector in non-inertial frames leads to system controllability degradation. Accordingly, a constraint compensation strategy is proposed: establishing linearly independent differential algebraic equations supplemented with momentum/angular momentum balance equations for the end platform. Co-Simulation results demonstrate that the optimized model reduces the maximum relative error of actuator joint moments to 0.98%, and maintains numerical stability across the entire configuration space. The constraint compensation framework provides a universal solution for dynamics modeling of complex closed-chain mechanisms, validated through applications in flight simulators and automotive driving simulators. Full article

Stroke is one of the leading causes of long-term disability worldwide, often resulting in motor impairments that limit the ability to perform daily activities independently. Conventional rehabilitation exoskeletons, while effective, are typically rigid, bulky, and expensive, limiting their usability outside of clinical settings. In response to these challenges, this work presents the development and validation of a novel soft exosuit designed for elbow flexion rehabilitation, incorporating a multi-wire Shape Memory Alloy (SMA) actuator capable of both position and force control. The proposed system features a lightweight and ergonomic textile-based design, optimized for user comfort, ease of use, and low manufacturing cost. A sequential activation strategy was implemented to improve the dynamic response of the actuator, particularly during the cooling phase, which is typically a major limitation in SMA-based systems. The performance of the multi-bundle actuator was compared with a single-bundle configuration, demonstrating superior trajectory tracking and reduced thermal accumulation. Surface electromyography tests confirmed a decrease in muscular effort during assisted flexion, validating the device’s assistive capabilities. With a total weight of 0.6 kg and a fabrication cost under EUR 500, the proposed exosuit offers a promising solution for accessible and effective home-based rehabilitation. Full article

Tracking control of a quadrotor–slung load system is extremely challenging due to its under-actuation property, couple effects, and various uncertainties. This work proposes a composite backstepping control framework combining command filter control and a multivariable finite-time disturbance observer to ensure robust position and orientation control for aerial payload transportation with high precision. Firstly, the kinematic and dynamic model under perturbations is derived based on Newton’s second law. The thrust control force consists of two orthogonal parts, each dedicated to regulating the position and orientation of the slung load independently. Then, hierarchical backstepping control generates the two parts in the load-translation and the load-orientation subsystems. Command filters are introduced into nonlinear backstepping to smoothen the control signals and overcome the problem of explosion of complexity. Additionally, to counteract the adverse effect of perturbations emerging in the linear velocity and angular velocity loops, multivariable finite-time observers are developed to ensure the estimation errors converge within a finite time horizon. Finally, comparative numerical simulation results validate the efficacy of the developed quadrotor–slung load tracking controller. Simulation results show that the proposed controller achieves smaller position tracking and orientation errors compared to traditional methods, demonstrating robust disturbance rejection and high-precision control. Full article

Multi-fingered dexterous hands provide superior dexterity in complex manipulation tasks due to their high degrees of freedom (DOFs) and biomimetic structures. Inspired by the anatomical structure of human tendons and muscles, numerous robotic hands powered by pneumatic artificial muscles (PAMs) have been created to replicate the compliant and adaptable features of biological hands. Nonetheless, PAMs have inherent nonlinear and hysteresis behaviors that create considerable challenges to achieving real-time control accuracy and stability in dexterous hands. In order to address these challenges, this paper proposes a hierarchical control architecture that employs a fuzzy PID strategy to optimize the nonlinear control of pneumatic artificial muscles (PAMs). The FPGA-based hardware integrates a multi-channel digital-to-analog converter (DAC) and a multiplexed acquisition module, facilitating the independent actuation of 20 PAMs and the real-time monitoring of 20 joints. The software implements a fuzzy PID algorithm that dynamically adjusts PID parameters based on both the error and the error rate, thereby effectively managing the nonlinear behaviors of the hand. Experimental results demonstrate that the designed control system achieves high precision in controlling the angle of a single finger joint, with errors maintained within ±1°. In scenarios involving multi-finger cooperative grasping and biomimetic motion demonstrations, the system exhibits excellent synchronization and real-time performance. These results validate the efficacy of the fuzzy PID control strategy and confirm that the proposed system fulfills the precision and stability requirements for complex operational tasks, providing robust support for the application of PAM-driven multi-fingered dexterous hands. Full article

Defective phononic crystals (PnCs) have garnered significant attention for their ability to localize and amplify elastic wave energy within defect sites or to perform narrowband filtering at defect-band frequencies. The necessity for continuously tunable defect characteristics is driven by the variable excitation frequencies encountered in rotating machinery. Conventional tuning methodologies, including synthetic negative capacitors or inductors integrated with piezoelectric defects, are constrained to fixed, offline, and incremental adjustments. To address these limitations, the present study proposes an active feedback approach that facilitates online, wide-range steering of defect bands in a one-dimensional PnC. Each defect is equipped with a pair of piezoelectric sensors and actuators, governed by three independently tunable feedback gains: displacement, velocity, and acceleration. Real-time sensor signals are transmitted to a multivariable proportional controller, which dynamically modulates local electroelastic stiffness via the actuators. This results in continuous defect-band frequency shifts across the entire band gap, along with on-demand sensitivity modulation. The analytical model that incorporates these feedback gains has been demonstrated to achieve a level of agreement with COMSOL benchmarks that exceeds 99%, while concurrently reducing computation time from hours to seconds. Displacement- and acceleration-controlled gains yield predictable, monotonic up- or down-shifts in defect-band frequency, whereas the velocity-controlled gain permits sensitivity adjustment without frequency drifts. Furthermore, the combined-gain operation enables the concurrent tuning of both the center frequency and the filtering sensitivity, thereby facilitating an instantaneous remote reconfiguration of bandpass filters. This framework establishes a new class of agile, adaptive ultrasonic devices with applications in ultrasonic imaging, structural health monitoring, and prognostics and health management. Full article

Distributed-drive electric vehicles (DDEVs), through independent, rapid, and precise control of the driving/braking torque of each wheel, offer unprecedented opportunities to enhance their handling stability, ride comfort, energy economy, and safety. However, their inherent over-actuation characteristics and multi-degree-of-freedom motion coupling pose significant challenges to the vehicle chassis control system. Chassis coordinated control, by coordinating multiple subsystems such as drive, braking, steering, and suspension, has become a key technology to fully leverage the advantages of distributed drive and address its challenges. This paper reviews the core issues in chassis coordinated control for DDEVs, comparatively analyzes several distributed electric drive coordinated control architectures, and systematically outlines recent research progress in lateral–longitudinal, lateral–vertical, longitudinal–vertical, and combined three-dimensional (lateral–longitudinal–vertical) coordinated control, including control architectures, key technologies, commonly used algorithms, and control allocation strategies. By analyzing and comparing the advantages, disadvantages, and application scenarios of different coordinated control schemes, this paper summarizes the key scientific problems and technical bottlenecks in this field and looks forward to development trends in intelligence, integration, and scenario-based fusion, aiming to provide a reference for the development of high-performance chassis control technology for DDEVs. Full article

This paper presents the design and evaluation of a novel soft pneumatic actuator featuring two independent bending chambers, enabling independent joint actuation and localization for rehabilitation purposes. The actuator’s dual-chamber configuration provides flexibility for applications requiring customized bending profiles. To measure the bending angle of the finger joints in real time, a camera-based system is employed, utilizing a deep learning detection model to localize the joints and estimate their bending angles. This approach provides a non-intrusive, sensor-free alternative to hardware-based measurement methods, reducing complexity and wiring typically associated with wearable devices. Experimental results demonstrate the effectiveness of the proposed actuator in achieving bending angles of 105 degrees for the metacarpophalangeal (MCP) joint and 95 degrees for the proximal interphalangeal (PIP) joint, as well as a gripping force of 9.3 N. The vision system also captures bending angles with a precision of 98%, indicating potential applications in fields such as rehabilitation and human–robot interaction. Full article

Social robots in Ambient Assisted Living (AAL) environments offer a promising alternative for enhancing senior care by providing companionship and functional support. These robots can serve as intuitive interfaces to complex smart home systems, allowing seniors and caregivers to easily control their environment and access various assistance services through natural interactions. By combining the emotional engagement capabilities of social robots with the comprehensive monitoring and support features of AAL, this integrated approach can potentially improve the quality of life and independence of elderly individuals while alleviating the burden on human caregivers. This paper explores the integration of social robotics with ambient assisted living (AAL) technologies to enhance elderly care. We propose a novel framework where a social robot is the central orchestrator of an AAL environment, coordinating various smart devices and systems to provide comprehensive support for seniors. Our approach leverages the social robot’s ability to engage in natural interactions while managing the complex network of environmental and wearable sensors and actuators. In this paper, we focus on the technical aspects of our framework. A computational P2P notebook is used to customize the environment and run reactive services. Machine learning models can be included for real-time recognition of gestures, poses, and moods to support non-verbal communication. We describe scenarios to illustrate the utility and functionality of the framework and how the robot is used to orchestrate the AAL environment to contribute to the well-being and independence of elderly individuals. We also address the technical challenges and future directions for this integrated approach to elderly care. Full article

This paper presents the design and implementation of a Model-based Predictive Control (MPC) strategy integrated within a modular multilayer architecture for a three-wheeled omnidirectional mobile robot, the Robotino 4 from Festo. The implemented architecture is organized into three hierarchical layers to support modularity and system scalability. The upper layer is responsible for trajectory planning. This planned trajectory is forwarded to the intermediate layer, where the MPC computes the optimal velocity commands to follow the reference path, taking into account the kinematic model and actuator constraints of the robot. Finally, these velocity commands are processed by the lower layer, which uses three independent PID controllers to regulate the individual wheel speeds. To evaluate the proposed control scheme, it was implemented in MATLAB R2024a using a lemniscate trajectory as the reference. The MPC problem was formulated as a quadratic optimization problem that considered the three states: the global position coordinates and orientation angle. The simulation included state estimation errors and motor dynamics, which were experimentally identified to closely match real-world behavior. The simulation and experimental results demonstrate the capability of the MPC to track the lemniscate trajectory efficiently. Notably, the close agreement between the simulated and experimental results validated the fidelity of the simulation model. In a real-world scenario, the MPC controller enabled simultaneous regulation of both the position and orientation, which offered a greater performance compared with approaches that assume a constant orientation. Full article

To address the challenges of small aperture size, limited scanning angles, and high fabrication costs in existing scanning micromirrors, this paper proposes a large-aperture biaxial electromagnetically driven scanning micromirror. The scanning micromirror utilizes a stainless-steel mirror structure and an actuation structure composed of arc-shaped permanent magnets (NdFeB 52), iron cores, and copper coils. By optimizing the magnet layout and coil design, it achieves large optical scanning angles in biaxial non-resonant scanning mode. Experimental results demonstrate that the optical scanning angles reach 61.4° (x-axis) under a DC driving current of ±18.1 mA and 61.1° (y-axis) under a DC driving current of ±25.2 mA with an effective mirror aperture of 9.54 mm × 10 mm. The resonant frequencies are 89 Hz (x-axis) and 63 Hz (y-axis). Experimental results verify the feasibility of biaxial independent control in non-resonant scanning mode. The design is fabricated using a low-cost computer numerical control (CNC) milling process and exhibits application potential in fields such as LiDAR, projection display, and optical communication, providing a novel approach for performance optimization of large-aperture scanning micromirrors. Full article

This paper focuses on the design analysis of a novel 5-degrees of freedom (DOF) double-driven parallel mechanism (PM). By arranging two independent actuators on one branch chain, the mechanism can realize the five degrees of freedom of the moving platform only by relying on three branch chains, which have the characteristics of a compact structure and large workspace. Subsequently, the kinematic model of the mechanism is established, and the workspace, dexterity, and singularity characteristics are analyzed based on the derived model. Additionally, an explicit dynamic model of the mechanism is established based on the principle of virtual work. Finally, based on the dynamic model, the manipulability ellipsoid index and the inertial coupling strength index are proposed, and the distribution of these two kinds of dynamic performance indexes in the workspace is studied. Full article

In this paper, the bending behavior of microbeams resting on elastic foundations is analyzed. Due to the widespread use of Micro-Electro-Mechanical Systems (MEMSs) in sensing and actuation applications, various approaches have been developed for modeling such beams. Numerous specialized analytical and numerical models exist for specific configurations of beams and elastic foundations. This work proposes a novel approach. Separate models for the beam and the elastic foundation are developed using the finite element method. These models are then coupled using a variable reduction technique, in which only the degrees of freedom of the beam are retained in the solving system. This approach enables the coupling of any beam and foundation model and allows for independent refinement of the foundation mesh without increasing the size of the solving system. This method is particularly effective for analyzing configurations where the substrate exhibits nonlinear or non-homogeneous characteristics, or where gaps are present between the beam and the substrate. The nonlocal effects due to the small scale of the beam are also considered. This paper focuses on both the static deformation and frequency response of the microbeam. The proposed approach is validated against previously published models. Compared with existing models, the method presented here offers a simpler and more flexible formulation, while allowing the inclusion of nonlinearities in both the beam and foundation, as well as the modeling of gaps. Full article

As physical capabilities decline with age, elderly individuals often require assistance from others when using the toilet. An auxiliary standing toilet chair can enhance convenience for the elderly, allowing them to use the toilet independently. Commercially available auxiliary standing toilet chairs and related patents share common issues, such as seat link rotation angles of less than 45° and a high driving force requirement. This study categorizes four-bar linkages into three design concepts and then carries out a kinematic design process based on the design requirements and constraints of the auxiliary standing toilet chair. Three feasible design examples were developed, followed by motion simulations and driving force analyses using INSPIRE 2019.2 software. In Design Example I, an actuator directly drives the seat link, rotating the seat to 48°. The required driving force for a 150 kg user is reduced from 6070 N to 2258 N, representing a 62.35% reduction in the required force. Full article

A novel over-constrained XYθ_z nano-positioning stage with a high load-bearing capacity is proposed. This serially connected displacement stage adopts an embedded structural design that integrates a translation stage with a rotation stage in series. The Z-axis amplification mechanism employs out-of-plane actuation, realising a compact solution for three-axis independent motion. The hybrid amplification mechanism designed in the translation stage ensures enhanced output displacement and structural stiffness. The hybrid-parallel amplification mechanism comprises a lever-type displacement amplifier and a Scott–Russell displacement amplifier connected in series, which is then connected in parallel with a bridge-type displacement amplifier. An over-constrained mechanism is introduced to impose redundant constraints along the Z-axis, effectively suppressing parasitic displacement in the Z-direction while enhancing resistance to out-of-plane deformation. A quasi-static model of the XYθ_z motion stage was established to comprehensively characterise the deformation behaviour of the stage, which was verified by finite element simulations and experiments on the prototype. The experimental results indicate that the XYθ_z stage achieves a large motion range (up to 152.22 μm × 151.3 μm × 2.885 mrad) while maintaining excellent anti-deformation capability 200 nm at 4 kg loading. Full article