Search Results (819)

Piping systems can be analogized to the “vascular systems” of vessels, but their transmission characteristics often result in loud noises and large vibrations. The integration of flexible inserts within these piping systems has been shown to isolate and/or mitigate such vibrations and noise. In this work, a novel sandwich flexible insert (NSFI) was presented specifically to reduce the vibrations and noise associated with piping systems on vessels. In contrast to conventional flexible inserts, the NSFI features a distinctive three-layer configuration, comprising elastic inner and outer layers, along with a honeycomb core exhibiting a zero Poisson’s ratio. The dynamic characteristics, specifically axial impedance, of the fluid-filled NSFI are examined utilizing a fluid–structure interaction (FSI) four-equation model. The validity of the theoretical predictions is corroborated through finite element analysis, experimental results, and comparisons with existing literature. Furthermore, the study provides a comprehensive evaluation of the effects of geometric and structural parameters on the dynamic characteristics of the NSFI. It is worth noting that axial impedance is significantly affected by these parameters, which suggests that the dynamic characteristics of the NSFI can be customized by parameter adjustments. Full article

In the present paper, impedance spectroscopy was employed to study the corrosion and anodic oxidation of stainless steel (AISI 316L at 280 °C/9 MPa) in contact with the boron-free primary coolant of a small modular reactor at two levels of KOH concentration. Analysis of impedance spectra with a distribution of relaxation times revealed contributions from the oxide layer and its interface with the coolant. Glow-Discharge Optical Emission Spectroscopy (GDOES) was used to estimate the thickness and elemental composition of the formed oxides. A quantitative interpretation of the impedance data using the Mixed-Conduction Model allowed us to estimate the kinetic and transport parameters of oxide growth and dissolution, as well as iron dissolution through oxide. The film thicknesses following exposure agreed with ex-situ analyses. The obtained corrosion and release rates were used for comparison with laboratory and industrial data in nominal pressurized water reactor primary coolants. Full article

A stroke is a critical medical condition and one of the leading causes of death among humans. Segmentation of the lesions of the brain in which the blood flow is impeded because of blood coagulation plays a vital role in drug prescription and medical diagnosis. Computed tomography (CT) scans play a crucial role in detecting abnormal tissue. There are several methods for segmenting medical images that utilize the main images without considering the patient’s privacy information. In this paper, a deep network is proposed that utilizes compressive sensing and ensemble learning to protect patient privacy and segment the dataset efficiently. The compressed version of the input CT images from the ISLES challenge 2018 dataset is applied to the ensemble part of the proposed network, which consists of two multi-resolution modified U-shaped networks. The evaluation metrics of accuracy, specificity, and dice coefficient are 92.43%, 91.3%, and 91.83%, respectively. The comparison to the state-of-the-art methods confirms the efficiency of the proposed compressive sensing-based ensemble net (CS-Ensemble Net). The compressive sensing part provides information privacy, and the parallel ensemble learning produces better results. Full article

Wearable sensors are central to health-monitoring systems, but the limited capacity of compact batteries poses a challenge for long-term and maintenance-free operation. In this study, we investigated ambient electromagnetic wave (AEMW) energy harvesting using a human body antenna (HBA) as a means to supply power to wearable sensors. The power density and frequency distribution of AEMWs were measured in diverse indoor, outdoor, and basement environments. We designed and fabricated a flexible HBA–circuit interface electrode, optimized for broadband impedance matching when worn on the body. Experimental comparisons using a simulated AEMW source demonstrated that the HBA outperformed a conventional small whip antenna, particularly at frequencies below 300 MHz. Furthermore, the outdoor measurements indicated that the power harvested by the HBA was estimated to be −31.9 dBm (0.64 μW), which is sufficient for the intermittent operation of low-power wearable sensors and Bluetooth Low Energy modules. The electromagnetic safety was also evaluated through numerical analysis, and the specific absorption rate was confirmed to be well below the international safety limits. These findings indicate that HBA-based AEMW energy harvesting provides a practical and promising approach to achieving battery-maintenance-free wearable devices. Full article

The solid electrolyte interphase (SEI) on the anode of lithium-ion batteries (LIBs) has been studied thoroughly due to its crucial importance to the battery’s long-term performance. At the same time, most studies of the SEI apply ex situ characterization methods, which may introduce artifacts or misinterpretations as they do not investigate the SEI in its unaltered state immersed in liquid battery electrolyte. Thus, in this work, we focus on using the non-destructive combination of electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) and impedance spectroscopy (EIS) in the same electrochemical cell. EQCM-D can not only probe the solidified products of the SEI but also allows for the monitoring of viscoelastic layers and viscosity changes of the electrolyte at the interphase during the SEI formation. EIS complements those results by providing electrochemical properties of the formed interphase. Our results highlight substantial differences in the physical and electrochemical properties between the SEI formed on copper and on amorphous carbon and show how formation parameters and the additive vinylene carbonate (VC) influence their growth. The EQCM-D results show consistently that much thicker SEIs are formed on carbon substrates in comparison to copper substrates. Full article

In the Internet of Things (IoT) era, the demand for cost-effective, flexible, wearable antennas and circuits has been growing. Accordingly, screen-printing techniques are becoming more popular due to their lower costs and high-volume manufacturing. This paper presents and investigates a full-screen-printed 1 × 4 Quasi-Yagi-Uda antenna array on a high-transparency flexible Zeonor thin-film substrate for emerging 26 GHz band (24.25–27.55 GHz) 5G applications. As part of this study, screen-printing implementation rules are developed by properly managing ink layer thickness on a transparent flexible Zeonor thin-film dielectric to achieve a decent antenna array performance. In addition, a screen-printing repeatability study has been carried out through a performance comparison of 24 antenna array samples manufactured by our research partner from CEA-Liten Grenoble. Despite the challenging antenna array screen printing at higher frequencies, the measured results show a good antenna performance as anticipated from the traditional subtractive printed circuit board (PCB) manufacturing process using standard substrates. It shows a wide-band matched input impedance from 22–28 GHz (i.e., 23% of relative band-width) and a maximum realized gain of 12.8 dB at 27 GHz. Full article

We investigated a novel natural dye-sensitized solar cell (DSSC) utilizing gadolinium ruthenate pyrochlore oxide Gd₂Ru₂O₇ (GRO) as a photoanode and compared its performance to the TiO₂-Gd₂Ru₂O₇ (TGRO) combined-layer configuration. The films were fabricated using the spin-coating technique, resulting in spherical grains with an estimated mean diameter of 0.2 µm, as observed via scanning electron microscopy (SEM). This innovative photoactive gadolinium ruthenate pyrochlore oxide demonstrated strong absorption in the visible range and excellent dye adhesion after just one hour of exposure to natural dye. X-ray diffraction confirmed the presence of the pyrochlore phase, where Raman spectroscopy identified various vibration modes characteristic of the pyrochlore structure. Incorporating Gd₂Ru₂O₇ as the photoanode significantly enhanced the overall efficiency of the DSSCs. The device configuration FTO/compact-layer/Gd₂Ru₂O₇/Hibiscus-sabdariffa/electrolyte(I⁻/I₃⁻)/Pt achieved a high efficiency of 9.65%, an open-circuit voltage (Voc) of approximately 3.82 V, and a current density of 4.35 mA/cm² for an active surface area of 0.38 cm². A mesoporous TiO₂-based DSSC was fabricated under the same conditions for comparison. Using impedance spectroscopy and cyclic voltammetry measurements, we provided evidence of the mechanism of conductivity and the charge carrier’s contribution or defect contributions in the DSSC cells to explain the obtained Voc value. Through cyclic voltammetry measurements, we highlight the redox activities of hibiscus dye and electrolyte (I⁻/I₃⁻), which confirmed electrochemical processes in addition to a photovoltaic response. The high and unusual obtained Voc value was also attributed to the presence in the photoanode of active dipoles, the layer thickness, dye concentration, and the nature of the electrolyte. Full article

To achieve rapid detection of stainless steel passivation quality, a time-domain impedance method was investigated based on a potential step transient with a portable three-electrode probe. A comparison of the effects of signal analysis and transient parameters was conducted, and the results were compared with those obtained in a bulk solution with a general three-electrode system. The measured transient current with the probe offered a higher signal-to-noise ratio, with minimal deviation from the frequency-domain impedance observed at a step amplitude of 0–100 mV. Measurements using the three-electrode probe under different stabilization times indicated that, after 30 s of stabilization, the measurement deviation was less than 1%, enabling a rapid assessment. Comparative testing of surfaces with varying passivation quality revealed that the pitting potential increases with increasing time-domain impedance, demonstrating the method’s capability to distinguish passivated surfaces with different corrosion resistances. Full article

The quantitative characterization of near-surface heterogeneity using ground-penetrating radar (GPR) is an important but challenging task. The estimation of subsurface geostatistical parameters from surface-based common-offset GPR reflection data has so far relied upon a Monte-Carlo-type inversion approach. This allows for a comprehensive exploration of the parameter space and provides some measure of uncertainty with regard to the inferred results. However, the associated computational costs are inherently high. To alleviate this problem, we present an alternative deep-learning-based technique, that, once trained in a supervised context, allows us to perform the same task in a highly efficient manner. The proposed approach uses a convolutional neural network (CNN), which is trained on a vast database of autocorrelations obtained from synthetic GPR images for a comprehensive range of stochastic subsurface models. An important aspect of the training process is that the synthetic GPR data are generated using a computationally efficient approximate solution of the underlying physical problem. This strategy effectively addresses the notorious challenge of insufficient training data, which frequently impedes the application of deep-learning-based methods in applied geophysics. Tests on a wide range of realistic synthetic GPR data generated using a finite-difference time-domain (FDTD) solution of Maxwell’s equations, as well as a comparison with the results of the traditional Monte Carlo approach on a pertinent field dataset, confirm the viability of the proposed method, even in the presence of significant levels of data noise. Our results also demonstrate that typical mismatches between the dominant frequencies of the analyzed and training data can be readily alleviated through simple spectral shifting. Full article

This study provides a systematic comparison of three types of phosphate coatings, applied by identical immersion phosphating processes and tested under two different environmental conditions representative of real industrial scenarios. The focus of this study is the investigation of the corrosion behaviour of zinc, magnesium, and manganese phosphate coatings on reinforcing steel in two different corrosion environments: river water and seawater. The phosphate coatings were obtained via the immersion phosphating technique. Various techniques, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), potentiodynamic polarization curve (PDP) testing, and electrochemical impedance spectroscopy (EIS), were used to evaluate the morphology and corrosion resistance of the coatings. The overall corrosion protection performance of the coatings followed the order of Zn phosphate > Mn phosphate > Mg phosphate. The results indicate that the samples with the Zn-phosphated coating showing the highest improvement. This coating showed no major morphological changes and achieved significantly reduced corrosion rates—0.258 µm/year in river water and 3.060 µm/year in seawater—compared to the typical corrosion rate of uncoated steel, which is about 45 µm/year. These findings emphasize the effectiveness of Zn phosphate coatings in mitigating corrosion in both river water and marine conditions. Full article

Background: Iminosugars are natural or synthetic sugar analogues with a very broad spectrum of activities, including those against the most prominent bacterial pathogens, like P. aeruginosa or S. aureus. In a series of studies, we have demonstrated that one of the synthetic iminosugars, PDIA (beta-1-C-propyl-1,4-dideoxy-1,4-imino-L-arabinitol), possesses the ability to suppress biofilm production by different pathogenic bacteria without inhibiting their growth. Thereby, PDIA is able to influence experimental skin infection caused by S. aureus. Methods: To elucidate molecular mechanisms by which PDIA impedes biofilm formation by S. aureus, a transcriptomic study was performed in which a biofilm-producing S. aureus strain was grown in the presence of PDIA for 24 and 48 h in comparison to a control without the iminosugar. The RNA was then isolated, converted into cDNA, sequenced, and data analysis was performed. Results: It appeared that PDIA caused the down-regulation of many bacteriophage genes responsible for the processes of bacterial cell lysis, and some genes responsible for cell wall degradation were also down-regulated. Among the 25 most upregulated genes were those representing the phosphotransferase system (PTS), which is required for carbohydrate uptake and control of carbon metabolism. The ranking of the most significant down-regulated genes after 24 h exposure to PDIA shows that they predominantly coded for both the synthesis and lysis of the peptidoglycan. Conclusions: We have shown here that the influence of PDIA on the expression of S. aureus genes is broad and affects many genes encoding metabolism and ribosomes. Full article

Terahertz metamaterial dual-band absorbers are used for multi-target detection and high-sensitivity sensing in complex environments by enhancing information that reflects differences in the measured substances. Traditional design processes are complex and time-consuming. Machine learning-based methods, such as neural networks and deep learning, require a large number of simulations to gather training samples. Existing design methods based on single-objective optimization often result in uneven multi-objective optimization, which restricts practical applications. In this study, we developed a metamaterial absorber featuring a circular split-ring resonator with four gaps nested in a “卍” structure and used the Multi-Objective Firefly Algorithm based on Multiple Cooperative Strategies to achieve fast optimization of the absorber’s structural parameters. A comparison revealed that our approach requires fewer iterations than the Multi-Objective Particle Swarm Optimization and reduces design time by nearly half. The absorber designed using this method exhibited two resonant peaks at 0.607 THz and 0.936 THz, with absorptivity exceeding 99%, indicating near-perfect absorption and quality factors of 31.42 and 30.08, respectively. Additionally, we validated the absorber’s wave-absorbing mechanism by applying impedance-matching theory. Finally, we elucidated the resonance-peak formation mechanism of the absorber based on the surface current and electric-field distribution at the resonance frequencies. These results confirmed that the proposed dual-band metamaterial absorber design is efficient, representing a significant step toward the development of metamaterial devices. Full article

Based on their high mechanical strength, Ti-based high-entropy alloys (HEAs) are of great potential as materials for high-performance reduced-diameter dental implants. Despite previous studies demonstrating their corrosion resistance in various simulated body fluids, their resistance in simulated buccal conditions has yet to be confirmed. In this work, the corrosion behavior of two Ti-based HEAs, TiZrHfNb, and TiZrHfNbTa was evaluated in comparison to CP-Ti and Ti-6Al-4V in artificial saliva (AS) solution and in AS with fluoride ion content (ASF). A set of electrochemical tests (electrochemical impedance spectroscopy, cyclic polarization, and Mott–Schottky) was employed and complemented with surface characterization analyses (scanning electron microscopy and atomic force microscopy) to determine dissolution and passivation mechanisms of the alloys. In general, the HEAs exhibited a far superior corrosion resistance compared to CP-Ti and Ti-6Al-4V alloys in both solutions. In the AS solution, the TiZrHfNb exhibited the highest polarization resistance and pitting potential, indicating a high corrosion resistance due to the formation of a robust passive layer. Whilst in the ASF solution, the TiZrHfNbTa showed a greater corrosion resistance due to the synergistic effect of Nb and Ta oxides that enhanced passive film stability. This finding emphasizes the role of Ta in elevating the corrosion resistance of Ti-based HEAs in the presence of fluoride ions and confirms the importance of chemical composition optimization in the development of next-generation dental alloys. Based on its electrochemical corrosion behavior, TiZrHfNbTa HEAs are promising new materials for high-performance reduced-diameter dental implants. Full article

This paper presents field experiments of mineral deposition on steel, induced by cathodic polarization in natural seawater, as a sustainable strategy for the life extension of marine steel structures. Although this approach is quite well known, the ability of the mineral deposit to both protect steel from corrosion in the absence of a cathodic current, thus operating as an inorganic coating, and provide an effective substrate for colonization by microorganisms still needs to be fully explained. To this end, two identical steel structure prototypes were installed at a depth of 20 m: one was submitted to cathodic polarization, while the other was left under free corrosion for comparison. After 6 months, the current supplied to the electrified structure was interrupted. A multidisciplinary approach was used to analyze the deposits on steel round bars installed in the prototypes over time, in the presence and in the absence of a cathodic current. Different investigation techniques were employed to provide the following information on the deposit: the composition in terms of elements, compounds and macro-biofouling; the morphology; the thickness and the degree of protection estimated by electrochemical impedance spectroscopy (EIS). The results showed that under cathodic polarization, the thickness of the deposit increased to 2.5 mm and then remained almost constant after the current was interrupted. Conversely, the surface impedance decreased from 3 kΩ cm² to about 1.5 kΩ cm² at the same time, and the aragonite–brucite ratio also decreased. This indicates a deterioration in the protection performance and soundness of the deposit, respectively. Considering the trends in thickness and impedance together, it can be concluded that the preformed mineral deposit does not undergo generalized deterioration after current interruption, which would result in a reduction in thickness, but rather localized degradation. This phenomenon was attributed to the burrowing action of marine organisms, which created porosities and/or capillary pathways through the deposit. Therefore, the corrosion protection offered by the mineral deposit without a cathodic current is insufficient because it loses its protective properties. However, the necessary current can be quite limited in the presence of the deposit, which in any case provides a suitable substrate for sustaining the colonization and growth of sessile marine organisms, thus promoting biodiversity. Full article

Objectives: To describe the results of nutritional and morphofunctional assessment in a cohort of adults with cystic fibrosis; to evaluate differences in nutritional status between patients with and without exocrine and/or endocrine pancreatic involvement. Methods: Cross-sectional study: A cohort of adults with cystic fibrosis evaluated in a multidisciplinary unit was analyzed. Pancreatic status was examined, and malnutrition was diagnosed according to GLIM criteria. Morphofunctional assessment consisted of nutritional ultrasound, bioelectrical impedance, handgrip dynamometry, and anthropometry. Qualitative variables are expressed as n (%), quantitative variables as median (IQR). For group comparisons, Fisher’s exact test was used for qualitative variables and the non-parametric median comparison test for quantitative variables. Results: n = 101 participants were recruited, of whom 44 (43.6%) were women. Median age was 33 (25–40.5) years. A total of 64 participants (63.4%) had exocrine pancreatic insufficiency (EPI), 44 (43.6%) had endocrine pancreatic insufficiency, and 28 (27.7%) had cystic fibrosis-related diabetes (CFRD). Median BMI was 23.4 (20.1–24.89) kg/m². A total of 48 patients (47.5%) were malnourished. Males with EPI had a higher prevalence of undernourishment than those without (56.4% vs. 16.7%, p = 0.005), but not women. CFRD patients displayed no differences in morphofunctional assessment. Conclusions: Almost half the sample was undernourished using GLIM criteria. Males with exocrine pancreatic insufficiency had worse nutritional status. Endocrine pancreatic involvement did not affect nutritional status. Full article