Search Results (1,013)

During the coronavirus 2019 pandemic, sports activities were restricted, raising concerns about their impact on the physical condition of adolescent athletes, which remained largely unquantified. This study was designed with two primary objectives: first, to precisely quantify and elucidate the differences in the physical condition of adolescent athletes before and after activity restrictions due to the pandemic; and second, to innovatively develop and validate a non-contact medical checkup application. Medical checks were conducted on 563 athletes designated for sports enhancement. Participants were junior high school students aged 13 to 15, and the sample consisted of 315 boys and 248 girls. Furthermore, we developed a smartphone application and compared self-checks using the application with in-person checks by orthopedic surgeons to determine the challenges associated with self-checks. Statistical tests were conducted to determine whether there were statistically significant differences in range of motion and flexibility parameters before and after the pandemic. Additionally, items with discrepancies between values self-entered by athletes using the smartphone application and values measured by specialists were detected, and application updates were performed. Student’s t-test was used for continuous variables, whereas the chi-square test was used for other variables. Following the coronavirus 2019 pandemic, athletes were stiffer than during the pre-pandemic period in terms of hip and shoulder joint rotation range of motion and heel–buttock distance. The dominant hip external rotation decreased from 53.8° to 46.8° (p = 0.0062); the non-dominant hip external rotation decreased from 53.5° to 48.0° (p = 0.0252); the dominant shoulder internal rotation decreased from 62.5° to 54.7° (p = 0.0042); external rotation decreased from 97.6° to 93.5° (p = 0.0282), and the heel–buttock distance increased from 4.0 cm to 10.4 cm (p < 0.0001). The heel–buttock distance and straight leg raising angle measurements differed between the self-check and face-to-face check. Although there are items that cannot be accurately evaluated by self-check, physical condition can be improved with less contact by first conducting a face-to-face evaluation under appropriate guidance and then conducting a self-check. These findings successfully address our primary objectives. Specifically, we demonstrated a significant decline in the physical condition of adolescent athletes following pandemic-related activity restrictions, thereby quantifying their impact. Furthermore, our developed non-contact medical checkup application proved to be a viable tool for monitoring physical condition with reduced contact, although careful consideration of measurable parameters is crucial. This study provides critical insights into the long-term effects of activity restrictions on young athletes and offers a practical solution for health monitoring during infectious disease outbreaks, highlighting the potential for hybrid checkup approaches. Full article

Demand Side Management (DSM) plays a crucial role in modern energy systems, enabling more efficient use of energy resources and contributing to the sustainability of the power grid. This study examines DSM strategies within a multi-environment context encompassing residential, commercial, and industrial sectors, with a focus on diverse appliance types that exhibit distinct operational characteristics and user preferences. Initially, a single-objective optimization approach using Genetic Algorithms (GAs) is employed to minimize the total energy cost under a real Time-of-Use (ToU) pricing scheme. This heuristic method allows for the effective scheduling of appliance operations while factoring in their unique characteristics such as power consumption, usage duration, and user-defined operational flexibility. This study extends the optimization problem to a multi-objective framework that incorporates the minimization of CO₂ emissions under a real annual energy mix while also accounting for user discomfort. The Non-dominated Sorting Genetic Algorithm II (NSGA-II) is utilized for this purpose, providing a Pareto-optimal set of solutions that balances these competing objectives. The inclusion of multiple objectives ensures a comprehensive assessment of DSM strategies, aiming to reduce environmental impact and enhance user satisfaction. Additionally, this study monitors the Peak-to-Average Ratio (PAR) to evaluate the impact of DSM strategies on load balancing and grid stability. It also analyzes the impact of considering different periods of the year with the associated ToU hourly schedule and CO₂ emissions hourly profile. A key innovation of this research is the integration of detailed, category-specific metrics that enable the disaggregation of costs, emissions, and user discomfort across residential, commercial, and industrial appliances. This granularity enables stakeholders to implement tailored strategies that align with specific operational goals and regulatory compliance. Also, the emphasis on a user discomfort indicator allows us to explore the flexibility available in such DSM mechanisms. The results demonstrate the effectiveness of the proposed multi-objective optimization approach in achieving significant cost savings that may reach 20% for industrial applications, while the order of magnitude of the trade-offs involved in terms of emissions reduction, improvement in discomfort, and PAR reduction is quantified for different frameworks. The outcomes not only underscore the efficacy of applying advanced optimization frameworks to real-world problems but also point to pathways for future research in smart energy management. This comprehensive analysis highlights the potential of advanced DSM techniques to enhance the sustainability and resilience of energy systems while also offering valuable policy implications. Full article

This study investigates the effectiveness of passive design in low-rise residential buildings located in arid desert climates, using the Dubai Solar Decathlon Middle East (SDME) competition as a case study. This full-scale experiment offers a unique opportunity to evaluate design solutions under controlled, realistic conditions; prescriptive, modeled performance; and monitored performance assessments. The prescriptive assessment reviews geometry, orientation, envelope thermal properties, and shading. Most houses adopt compact forms, with envelope-to-volume and envelope-to-floor area ratios averaging 1 and 3.7, respectively, and window-to-wall ratios of approximately 17%, favoring north-facing openings to optimize daylight while reducing heat gain. Shading is strategically applied, horizontal on south façades and vertical on east and west. The thermal properties significantly exceed the local code requirements, with wall performance up to 80% better than that mandated. The modeled assessment uses Building Energy Models (BEMs) to simulate the impact of prescriptive measures on energy performance. Three variations are applied: assigning minimum local code requirements to all the houses to isolate the geometry (baseline); removing shading; and applying actual envelope properties. Geometry alone accounts for up to 60% of the variation in cooling intensity; shading reduces loads by 6.5%, and enhanced envelopes lower demand by 14%. The monitored assessment uses contest-period data. Indoor temperatures remain stable (22–25 °C) despite outdoor fluctuations. Energy use confirms that houses with good designs and airtightness have lower cooling loads. Airtightness varies widely (avg. 14.5 m³/h/m²), with some well-designed houses underperforming due to construction flaws. These findings highlight the critical role of passive design as the first layer for improving the energy performance of the built environment and advancing toward net-zero targets, specifically in arid desert climates. Full article

In the context of achieving low-carbon goals, building low-carbon energy systems is a crucial development direction and implementation pathway. Renewable energy is favored because of its clean characteristics, but the access may have an impact on the power grid. Microgrid technology provides an effective solution to this problem. Uncertainty exists in single microgrids, so multiple microgrids are introduced to improve system stability and robustness. Electric carbon trading and profit redistribution among multiple microgrids have been challenges. To promote energy commensurability among microgrids, expand the types of energy interactions, and improve the utilization rate of renewable energy, this paper proposes a cooperative operation optimization model of multi-microgrids based on the green certificate and carbon trading mechanism to promote local energy consumption and a low carbon economy. First, this paper introduces a carbon capture system (CCS) and power-to-gas (P2G) device in the microgrid and constructs a cogeneration operation model coupled with a power-to-gas carbon capture system. On this basis, a low-carbon operation model for multi-energy microgrids is proposed by combining the local carbon trading market, the stepped carbon trading mechanism, and the green certificate trading mechanism. Secondly, this paper establishes a cooperative game model for multiple microgrid electricity carbon trading based on the Nash negotiation theory after constructing the single microgrid model. Finally, the ADMM method and the asymmetric energy mapping contribution function are used for the solution. The case study uses a typical 24 h period as an example for the calculation. Case study analysis shows that, compared with the independent operation mode of microgrids, the total benefits of the entire system increased by 38,296.1 yuan and carbon emissions were reduced by 30,535 kg through the coordinated operation of electricity–carbon coupling. The arithmetic example verifies that the method proposed in this paper can effectively improve the economic benefits of each microgrid and reduce carbon emissions. Full article

The aim of this study was to improve the efficiency of in situ uranium leaching by developing a specialized methodology for selecting rational parameters for the chemical treatment of production wells. This approach was designed to enhance the filtration properties of ores and extend the uninterrupted operation period of wells, considering the clay content of the productive horizon, the geological characteristics of the ore-bearing layer, and the composition of precipitation-forming materials. The mineralogical characteristics of ore and precipitate samples formed during the in situ leaching of uranium under various mining and geological conditions at a uranium deposit in the Syrdarya depression were identified using an X-ray diffraction analysis. It was established that ores of the Santonian stage are relatively homogeneous and consist mainly of quartz. During well operation, the precipitates formed are predominantly gypsum, which has little impact on the filtration properties of the ore. Ores of the Maastrichtian stage are less homogeneous and mainly composed of quartz and smectite, with minor amounts of potassium feldspar and kaolinite. The leaching of these ores results in the formation of gypsum with quartz impurities, which gradually reduces the filtration properties of the ore. Ores of the Campanian stage are heterogeneous, consisting mainly of quartz with varying proportions of clay minerals and gypsum. The leaching of these ores generates a variety of precipitates that significantly reduce the filtration properties of the productive horizon. Effective compositions and concentrations of decolmatant (clog removal) solutions were selected under laboratory conditions using a specially developed methodology and a TESCAN MIRA scanning electron microscope. Based on a scanning electron microscope analysis of the samples, the effectiveness of a decolmatizing solution based on hydrochloric and hydrofluoric acids (taking into account the concentration of the acids in the solution) was established for the destruction of precipitate formation during the in situ leaching of uranium. Geological blocks were ranked by their clay content to select rational parameters of decolmatant solutions for the efficient enhancement of ore filtration properties and the prevention of precipitation formation. Pilot-scale testing of the selected decolmatant parameters under various mining and geological conditions allowed the optimal chemical treatment parameters to be determined based on the clay content and the composition of precipitates in the productive horizon. An analysis of pilot well trials using the new approach showed an increase in the uninterrupted operational period of wells by 30%–40% under average mineral acid concentrations and by 25%–45% under maximum concentrations with surfactant additives in complex geological settings. As a result, an effective methodology for ranking geological blocks based on their ore clay content and precipitate composition was developed to determine the rational parameters of decolmatant solutions, enabling a maximized filtration performance and an extended well service life. This makes it possible to reduce the operating costs of extraction, control the geotechnological parameters of uranium well mining, and improve the efficiency of the in situ leaching of uranium under complex mining and geological conditions. Additionally, the approach increases the environmental and operational safety during uranium ore leaching intensification. Full article

To ensure stability and transparency in the European logistics sector, in May 2017, the European Commission presented several proposals to change the regulation of the market—in particular, market access, driving and rest periods, and business trips. In the development of this package, several unfavourable decisions were made that go against Lithuanian transport companies, which will have a significant impact on the companies’ finances, as the frequent return of trucks will lead to additional fuel costs and is also in contradiction with the concept of green logistics. Thus, it is essential to study the Mobility Package’s pros and cons and compare researchers’ views. Accordingly, the subject of this article is the impact of the Mobility Package on Lithuanian logistics companies. This article employs various methods, including an analysis of the scientific literature and legislation, statistical data analysis, PEST analysis, and qualitative research based on expert interviews. The results allow us to identify that the content of the Mobility Package is driven by the goal of ensuring equivalent working conditions throughout the EU, which in this case is the most important object of the legal changes. Also, based on the results obtained, it can be stated that Lithuanian logistics companies that want to remain in the market have several solutions they can employ to achieve that goal, and to support their efforts, a competitiveness improvement model for Lithuanian logistics companies has been developed. Full article

Using LULC change detection analysis, it is possible to identify changes due to urbanization, deforestation, or a natural disaster in an area. As population growth and urbanization increase, real-time solutions for the effects of urbanization on land use are required to assess its implications for food security and livelihood. This study seeks to identify and quantify recent LULC changes in Limbe, Cameroon, and to measure rates of conversion between agricultural, forest, and urban lands between 1986 and 2020 using remote sensing and GIS. Also, there is a deficiency of research employing these data to evaluate the efficiency of LULC satellite data and a lack of awareness by local stakeholders regarding the impact on LULC change. The changes were identified in four classes utilizing maximum supervised classification in ENVI and ArcGIS environments. The classification result reveals that the 2020 image has the highest overall accuracy of 94.6 while the 2002 image has an overall accuracy of 89.2%. The overall gain for agriculture was approximately 4.6 km², urban had an overall gain of nearly 12.7 km², while the overall loss for forest was −16.9 km² during this period. Much of the land area previously occupied by forest is declining as pressures for urban areas and new settlements increase. This study’s findings have significant policy implications for sustainable land use and food security. It also provides a spatial method for monitoring LULC variations that can be used as a framework by stakeholders who are interested in environmentally conscious development and sustainable land use practices. Full article

This study focuses on the analysis of soliton solutions within the framework of the time-fractional cubic–quintic nonlinear Schrödinger equation (TFCQ-NLSE), a powerful model with broad applications in complex physical phenomena such as fiber optic communications, nonlinear optics, optical signal processing, and laser–tissue interactions in medical science. The nonlinear effects exhibited by the model—such as self-focusing, self-phase modulation, and wave mixing—are influenced by the combined impact of the cubic and quintic nonlinear terms. To explore the dynamics of this model, we apply a robust analytical technique known as the sub-ODE method, which reveals a diverse range of soliton structures and offers deep insight into laser pulse interactions. The investigation yields a rich set of explicit soliton solutions, including hyperbolic, rational, singular, bright, Jacobian elliptic, Weierstrass elliptic, and periodic solutions. These waveforms have significant real-world relevance: bright solitons are employed in fiber optic communications for distortion-free long-distance data transmission, while both bright and dark solitons are used in nonlinear optics to study light behavior in media with intensity-dependent refractive indices. Solitons also contribute to advancements in quantum technologies, precision measurement, and fiber laser systems, where hyperbolic and periodic solitons facilitate stable, high-intensity pulse generation. Additionally, in nonlinear acoustics, solitons describe wave propagation in media where amplitude influences wave speed. Overall, this work highlights the theoretical depth and practical utility of soliton dynamics in fractional nonlinear systems. Full article

The impact of exogenous melatonin treatment on the postharvest quality and storability of blue honeysuckle fruit was investigated. Fruits were immersed in melatonin solutions at concentrations of 0 (control), 0.01, 0.05, and 0.25 mM for 5 min and subsequently stored at –1 °C for 63 d. Among all treatments, the combination of two-week storage without fruit puncturing and 0.05 mM melatonin application significantly delayed fruit softening and decay even at the initial stage of storage, while also increasing the concentration of phenolic compounds and enhancing antioxidant activity. During the later storage period (28–63 d), melatonin-treated fruits maintained higher levels of maltose, fructose, and sucrose, contributing to improved flavor retention. In contrast, both lower (0.01 mM) and higher (0.25 mM) concentrations were less effective or even detrimental to fruit quality. HPLC-ESI-QTOF-MS² analysis revealed that 0.05 mM melatonin effectively preserved several functional phenolics, including p-coumaroylquinic acid, caffeoyl glucose, 5-O-caffeoylquinic acid, 3-O-caffeoylquinic acid, luteolin-7-O-glucoside, and hydroxytyrosol. Thus, 0.05 mM melatonin is effective in delaying senescence and maintaining the postharvest quality of blue honeysuckle fruit. Full article

The influence of the copper (Cu) content on the corrosion resistance of 3.5%Ni low-carbon weathering steel was investigated using periodic dry–wet cycle accelerated corrosion tests. The mechanical properties of the steels were assessed via tensile and low-temperature impact tests, while corrosion resistance was evaluated based on weight loss measurements. Surface oxide layers were characterized using three-dimensional laser confocal microscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and electrochemical methods. Electron probe microanalysis (EPMA) was employed to examine the cross-sectional morphology of the oxide layer after 72 h of accelerated corrosion tests. The results indicate that the solution state of Cu increased the strength of 3.5%Ni steels but significantly damaged the low-temperature toughness. As the Cu content increased from 0.75% to 1.25%, the corrosion rate decreased from 4.65 to 3.74 g/m² h. However, when there was a further increase in the Cu content to 2.15%, there was little decrease in the corrosion rate. With the increase in the Cu content from 0.75% to 2.15%, the surface roughness of 3.5%Ni weathering steel after corrosion decreased from 5.543 to 5.019 μm, and the corrosion behavior was more uniform. Additionally, the α/γ protective factor of the oxide layer of the surface layer increased from 2.58 to 2.84 with an increase in the Cu content from 0.75% to 1.25%, resulting in the oxide layer of the surface layer being more protective. For 1.25%Cu steel, the corrosion current density of rusted samples is lower (ranging from 1.2609 × 10⁻⁴ A/cm² to 3.7376 × 10⁻⁴ A/cm²), and the corrosion potential is higher (ranging from −0.85544 V to −0.40243 V). Therefore, the rusted samples are more corrosion resistant. The Cu in the oxide layer of the surface layer forms CuO and CuFeO₂, which are helpful for increasing corrosion resistance, which inhibits the penetration of Cl⁻. Full article

Marine biofouling significantly impacts the performance and longevity of polymer-based marine structures, particularly those designed for hydrodynamic applications such as Vortex-Induced Vibration suppression systems. Traditional antifouling solutions rely on copper-based multilayer coatings, which present challenges including mechanical vulnerability (e.g., chipping and scratching), high material and labor demands, and environmental concerns such as volatile organic compound emissions and copper leaching. Recent developments in material science have introduced an alternative system involving the direct incorporation of copper oxide (Cu₂O) into high-density polyethylene (HDPE) during the molding process. This study conducts a comparative life cycle assessment (LCA) of two antifouling integration methods—System 1 (traditional coating-based) and System 2 (Cu₂O-impregnated HDPE)—evaluating their environmental impact across production, application, use, and end-of-life stages. The functional unit used for this study was 1 square meter for a time period of five years. Using ISO 14040-compliant methodology and data from Ecoinvent and OpenLCA, three impact categories were assessed: global warming potential (GWP), cumulative energy demand (CED), and marine aquatic ecotoxicity Potential (MAETP). The results indicate that System 2 outperforms System 1 in GWP (4.42 vs. 5.65 kg CO₂-eq), CED (75.3 vs. 91.0 MJ-eq), and MAETP (327,002 vs. 469,929 kg 1,4-DCB-eq) per functional unit over a five-year lifespan, indicating a 21.8%, 17.3%, and 30.4% reduction in the key impact factors, respectively. These results suggest that direct Cu₂O incorporation offers a more environmentally sustainable and mechanically resilient antifouling strategy, supporting the potential of embedded antifouling systems to shift industry practices toward more sustainable marine infrastructure. Full article

High-precision positioning is the foundation for the functionality of various intelligent agents. In complex environments, such as urban canyons, relative pose estimation using cameras is a crucial step in high-precision positioning. To take advantage of the ability of an inertial measurement unit (IMU) to provide relatively accurate gravity prior information over a short period, we propose a minimal solution method for the relative pose estimation of a stereo camera system assisted by the IMU. We rigidly connect the IMU to the camera system and use it to obtain the rotation matrices in the roll and pitch directions for the entire system, thereby reducing the minimum number of corresponding points required for relative pose estimation. In contrast to classic pose-estimation algorithms, our method can also calculate the camera focal length, which greatly expands its applicability. We constructed a simulated dataset and used it to compare and analyze the numerical stability of the proposed method and the impact of different levels of noise on algorithm performance. We also collected real-scene data using a drone and validated the proposed algorithm. The results on real data reveal that our method exhibits smaller errors in calculating the relative pose of the camera system compared with two classic reference algorithms. It achieves higher precision and stability and can provide a comparatively accurate camera focal length. Full article

The chiral nonlinear Schrödinger equation (CNLSE) serves as a simplified model for characterizing edge states in the fractional quantum Hall effect. In this paper, we leverage the generalization and parameter inversion capabilities of physics-informed neural networks (PINNs) to investigate both forward and inverse problems of 1D and 2D CNLSEs. Specifically, a hybrid optimization strategy incorporating exponential learning rate decay is proposed to reconstruct data-driven solutions, including bright soliton for the 1D case and bright, dark soliton as well as periodic solutions for the 2D case. Moreover, we conduct a comprehensive discussion on varying parameter configurations derived from the equations and their corresponding solutions to evaluate the adaptability of the PINNs framework. The effects of residual points, network architectures, and weight settings are additionally examined. For the inverse problems, the coefficients of 1D and 2D CNLSEs are successfully identified using soliton solution data, and several factors that can impact the robustness of the proposed model, such as noise interference, time range, and observation moment are explored as well. Numerical experiments highlight the remarkable efficacy of PINNs in solution reconstruction and coefficient identification while revealing that observational noise exerts a more pronounced influence on accuracy compared to boundary perturbations. Our research offers new insights into simulating dynamics and discovering parameters of nonlinear chiral systems with deep learning. Full article

Over the past 50 years, coastal erosion has become an increasingly critical issue worldwide, and Colombia’s Caribbean coast is no exception. In urban areas, this challenge is further complicated by hard protection structures, which, while often implemented as immediate solutions, can disrupt sediment transport and trigger unintended long-term consequences. This study examines shoreline changes in Riohacha, the capital of La Guajira Department, over a 35-year period (1987–2022), focusing on the impacts of coastal protection structures—specifically, the construction of seven groins and a seawall between 2006 and 2009—on coastal dynamics. Using twelve images (photographs and satellite) and the Digital Shoreline Analysis System (DSAS), the evolution of both beaches and cliffs has been analyzed. The results reveal a dramatic shift in shoreline behavior: erosion rates of approximately 0.5 m/year prior to the interventions transitioned to accretion rates of up to 11 m/year within the groin field, where rapid infill occurred. However, this sediment retention has exacerbated erosion in downstream cliff areas, with retreat rates reaching 1.8 ± 0.2 m/year. To anticipate future coastal evolution, predictive models were applied through 2045, providing insights into potential risks for infrastructure and urban development. These findings highlight the need for a strategic, long-term approach to coastal management that considers both the benefits and unintended consequences of engineering interventions. Full article

Tetragonia tetragonioides, or New Zealand spinach, is a widespread halophyte native to eastern Asia, Australia, and New Zealand, and naturalized in some Mediterranean regions. This underutilized vegetable is consumed for its leaves, raw or cooked. For the first time, we investigated the feasibility of using whole baby plants (including stems and leaves) as raw material for ready-to-eat (RTE) vegetable production. Our study assessed Tetragonia’s suitability for hydroponic cultivation over two cycles (autumn–winter and spring). We investigated the impact of increasing nutrient rates (only water, half-strength, and full-strength nutrient solutions) and plant densities (365, 497, and 615 plants m⁻² in the first trial and 615 and 947 plants m⁻² in the second) on baby plant production. We also analyzed the plants’ morphological and biochemical characteristics, and their viability for cold storage (21 days at 4 °C) as a minimally processed product. Tetragonia adapted well to hydroponic cultivation across both growing periods. Nevertheless, climatic conditions, plant density, and nutrient supply significantly influenced plant growth, yield, nutritional quality, and post-harvest storage. The highest plant density combined with the full-strength nutrient solution resulted in the highest yield, especially during spring (1.8 kg m⁻²), and favorable nutritional characteristics (β-carotene, Vitamin C, Fe, Cu, Mn, and Zn). Furthermore, Tetragonia baby plants proved suitable for minimal processing, maintaining good quality retention for a minimum of 14 days, thus resulting in a viable option for the RTE vegetable market. Full article