Search Results (221)

The strength parameters of fault gouge are critical factors that influence sealing capacity and fault reactivation in underground gas storage reservoirs. This study investigates the shear characteristics of remolded fault gouge under varying hydro-mechanical conditions, focusing on the coupled influence of water content and cementation. Sixty fault gouge samples are prepared using a mineral mixture of quartz, montmorillonite, and kaolinite, with five levels of water content (10–30%) and three cementation degrees (0%, 1%, 3%). Direct shear tests are conducted under four normal stress levels (100–400 kPa), and microstructural characteristics are examined using SEM. The results show that shear strength and cohesion exhibit a non-monotonic trend with water content, increasing initially and then decreasing, while the internal friction angle decreases continuously. Higher cementation degrees not only enhance shear strength and reduce the softening effect caused by water but also shift the failure mode from ductile sliding to brittle, cliff-type rupture. Moreover, clay content is found to modulate the degree—but not the trend—of strength parameter responses to water and cementation variations. Based on the observed mechanical behavior, a semi-empirical shear strength prediction model is developed by extending the classical Mohr–Coulomb criterion with water–cementation coupling terms. The model accurately predicts cohesion and internal friction angle as functions of water content and cementation degree, achieving strong agreement with experimental results (R² = 0.8309 for training and R² = 0.8172 for testing). These findings provide a practical and interpretable framework for predicting the mechanical response of fault gouge under complex geological conditions. Full article

Anthropogenic activities and climate change have significantly altered runoff generation in the upper Han River basin, posing a challenge to the water supply sustainability for the Middle Route of the South-to-North Water Diversion Project. Land use/cover changes (LUCCs) affect hydrological processes by modifying evapotranspiration, infiltration and soil moisture content. Based on hydro-meteorological data from 1961 to 2023 and LUCC data series from 1985 to 2023, this study aimed to identify the temporal trend in hydro-meteorological variables, to quantify the impacts of underlying land surface and climate factors at different time scales and to clarify the effects of LUCCs and basin greening on the runoff generation process. The results showed that (1) inflow runoff declined at a rate of −1.71 mm/year from 1961 to 2023, with a marked shift around 1985, while potential evapotranspiration increased at a rate of 2.06 mm/year within the same time frame. (2) Annual climate factors accounted for 61.01% of the runoff reduction, while underlying land surface contributed 38.99%. Effective precipitation was the dominant climatic factor during the flood season, whereas potential evapotranspiration had a greater influence during the dry season. (3) From 1985 to 2023, the LUCC changed significantly, mainly manifested by the increasing forest area and decreasing crop land area. The NDVI also showed an upward trend over the years; the actual evapotranspiration increased by 1.163 billion m³ due to the LUCC. This study addresses the climate-driven and human-induced hydrological changes in the Danjiangkou Reservoir and provides an important reference for water resource management. Full article

In the current configuration of Brazil’s hydro-thermal-wind power system, hydroelectric reservoirs have progressively lost their long-term regulatory role due to inadequate planning, inefficient energy use, and reduced inflows. In the context of the energy transition and the incorporation of low-emission technologies into the generation mix, this study proposes expanding nuclear baseload capacity as a “regulatory thermal buffer” to mitigate hydrological uncertainty and strengthen grid stability. Using the São Francisco River basin as a case study, an equivalence factor is developed to relate nuclear energy output to stored hydropower reservoir volume. Results show that nuclear generation can help restore the multi-annual regulatory capacity of Brazil’s hydropower system and enhance the resilience of the National Interconnected System by contributing substantial inertia to an increasingly variable, renewable-based grid. Full article

Under the influence of global climate change, water conservancy projects located in the high-latitude cold regions of the world are facing severe challenges. This study addresses the contradiction between water supply stability and ecological flow during the dry season in cold regions. Taking Linhai Reservoir as the core, it integrates the HEC-RAS hydrodynamic model with multi-source data such as basin topography, hydro-meteorological data, and water conservancy project parameters to construct a multi-scenario water supply scheduling model during the dry season. The aim is to provide scientific recommendations for different reservoir operation strategies in response to varying frequencies of upstream inflow, based on simulations conducted after the reservoir’s completion. Taking into account winter runoff reduction characteristics and engineering parameters, we simulated the relationships between water level and flow, ecological flow requirements, and urban water shortages. The results indicate that in both flood and normal years, dynamic coordination of storage and discharge can achieve a daily water supply of 120,000 cubic meters, with 100% compliance for the ecological flow rate. For mild and moderate drought years, additional water diversion becomes necessary to achieve 93.5% and 89% supply reliability, respectively. During severe and extreme droughts, significantly reduced reservoir inflows lower ecological compliance rates, necessitating emergency measures, such as utilizing dead storage capacity and exploring alternative water sources. The study proposes operational strategies tailored to different drought intensities: initiating storage adjustments in September for mild droughts and implementing peak-shifting measures by mid-October for extreme droughts. These approaches enhance storage efficiency and mitigate ice blockage risks. This research supports the water supply security and river ecological health of urban and rural areas in Mudanjiang City and Hailin City and provides a certain scientific reference basis for the multi-objective coordinated operation of reservoirs in the same type of high-latitude cold regions. Full article

Micro-fracturing technology is a key approach to enhancing the flow capacity of oil sands reservoirs and improving Steam-Assisted Gravity Drainage (SAGD) performance, whereas heterogeneity in reservoir physical properties significantly impacts stimulation effectiveness. This study systematically investigates the coupling mechanisms of asphaltene content, clay content, and heavy oil viscosity on micro-fracturing stimulation effectiveness, based on the oil sands reservoir in Block Zhong-18 of the Fengcheng Oilfield. By establishing an extended Drucker–Prager constitutive model, Kozeny–Poiseuille permeability model, and hydro-mechanical coupling numerical simulation, this study quantitatively reveals the controlling effects of reservoir properties on key rock parameters (e.g., elastic modulus, Poisson’s ratio, and permeability), integrating experimental data with literature review. The results demonstrate that increasing clay content significantly reduces reservoir permeability and stimulated volume, whereas elevated asphaltene content inhibits stimulation efficiency by weakening rock strength. Additionally, the thermal sensitivity of heavy oil viscosity indirectly affects geomechanical responses, with low-viscosity fluids under high-temperature conditions being more conducive to effective stimulation. Based on the quantitative relationship between cumulative injection volume and stimulation parameters, a classification-based optimization model for oil sands reservoir operations was developed, predicting over 70% reduction in preheating duration. This study provides both theoretical foundations and practical guidelines for micro-fracturing parameter design in complex oil sands reservoirs. Full article

Geological storage of CO₂ in offshore deep saline aquifers is widely recognized as an effective strategy for large-scale carbon emission reduction. This study aims to assess the mechanical integrity and storage efficiency of reservoirs using a multi-layer CO₂ injection method in the Enping 15-1 Oilfield CO₂ storage project which is the China’s first offshore carbon capture, utilization, and storage (CCUS) demonstration. A coupled Hydro–Mechanical (H–M) model is constructed using the TOUGH-FLAC simulator to simulate a 10-year CO₂ injection scenario, incorporating six vertically distributed reservoir layers. A sensitivity analysis of 14 key geological and geomechanical parameters is performed to identify the dominant factors influencing injection safety and storage capacity. The results show that a total injection rate of 30 kg/s can be sustained over a 10-year period without exceeding mechanical failure thresholds. Reservoirs 3 and 4 exhibit the greatest lateral CO₂ migration distances over the 10-year injection period, indicating that they are the most suitable target layers for CO₂ storage. The sensitivity analysis further reveals that the permeability of the reservoirs and the friction angle of the reservoirs and caprocks are the most critical parameters governing injection performance and mechanical stability. Full article

The spatiotemporal heterogeneity of moisture distribution causes the coal pillar dams in underground water reservoirs to undergo long-term dry–wet cycles (DWCs) under varying moisture content increments (MCIs). Accurately measuring the pore damage and fractal dimensions (D_f) of coal rock by different MCIs under DWCs is a prerequisite for in-depth disclosure of the strength deterioration mechanism of underground reservoir coal pillar dams. This study employed low-field nuclear magnetic resonance (LF-NMR) to quantitatively characterize the pore structural evolution and fractal dimension with different MCI variations (Δw = 4%, 6%, 8%) after one to five DWCs. The results indicate that increasing MCIs at constant DWC numbers (N_DWC) induces significant increases in pore spectrum area, adsorption pore area, and seepage pore area. MRI visualization demonstrates a progressive migration of NMR signals from sample peripheries to internal regions, reflecting enhanced moisture infiltration with higher MCIs. Total porosity increases monotonically with MCIs across all tested cycles. Permeability, T₂ cutoff (T_2C), and D_f of free pores exhibit distinct response patterns. A porosity-based damage model further reveals that the promoting effect of cycle numbers on pore development and expansion outweighs that of MCIs at N_DWC = 5. This pore-scale analysis provides essential insights into the strength degradation mechanisms of coal pillar dams under hydro-mechanical coupling conditions. Full article

In this review paper, we perform a comprehensive review of the current state of the art, worldwide applications, and modifications of the Snowmelt Runoff Model (SRM). Snow is a significant element of the hydrologic cycle and is sometimes regarded as the primary source of streamflow in watersheds at high latitudes and altitudes. Quantitative assessment of snowmelt runoff is crucial for real-world applications, including runoff projections, reservoir management, hydro-electricity production, irrigation techniques, and flood control, among others. Numerous hydrological modeling software have been developed to simulate snowmelt-derived streamflow. The SRM is one of the well-known modeling software developed to simulate snowmelt-derived streamflow. The SRM simulates snowmelt runoff with fewer data requirements and uses remotely sensed snow cover extent. This makes the SRM appropriate for use in data-scarce locations, particularly in remote and inaccessible mountain watersheds at higher elevations. It is a conceptual, deterministic, semi-distributed, and degree-day hydrological model that can be applied in mountainous basins of nearly any size. Recent advancements in remote sensing integration and climate model coupling have significantly enhanced the model’s ability to estimate snowmelt runoff. Additionally, numerous studies have recently improved the traditional SRM, further enhancing its capabilities. This paper highlights some of the global SRM research, focusing on the working of the model, input parameters, remote sensing data availability, and modifications to the original model. Full article

In the production process of horizontal wells, wellbore temperature data play a critical role in predicting shale gas production. This study proposes a coupled thermo-hydro-mechanical (THM) mathematical model that accounts for the influence of the stress field when determining the distribution of wellbore temperature. The model integrates the effects of heat transfer in the temperature field, gas transport in the seepage field, and the mechanical deformation of shale induced by the stress field. The coupled model is solved using the finite difference method. The model was validated against field data from shale gas production, and sensitivity analyses were conducted on seven key parameters related to the stress field. The findings indicate that the stress field exerts an influence on both the wellbore temperature distribution and the total gas production. Neglecting the stress field effects may lead to an overestimation of shale gas production by up to 12.9%. Further analysis reveals that reservoir porosity and Langmuir volume are positively correlated with wellbore temperature, while permeability, Young’s modulus, Langmuir pressure, the coefficient of thermal expansion, and adsorption strain are negatively correlated with wellbore temperature. Full article

The seasonal and interannual irregularity of temperature and precipitation is a feature of the Mediterranean climate that is intensified by climate change and constitutes a relevant driver of water and soil degradation. This study was developed during three years in a hydro-agricultural area of the Alqueva irrigation system (Portugal) with Mediterranean climate conditions. The sampling campaigns included collecting water samples from eight irrigation hydrants, analyzed four times yearly. The analysis incorporated meteorological data and indices (precipitation, temperature, and drought conditions) alongside chemical parameters, using multivariate statistics (factor analysis and cluster analysis) to identify key water quality drivers. Additionally, machine learning models (Random Forest regression and Gradient Boosting machine) were employed to predict electrical conductivity (ECw), sodium adsorption ratio (SAR), and pH based on chemical and climatic variables. Water quality evaluation showed a prevalence of a slight to moderate soil sodification risk. The factor analysis outcome was a three-factor model related to salinity, sodicity, and climate. The cluster analysis revealed a grouping pattern led by year and followed by stage, pointing to the influence of inter-annual climate irregularity. Variations in water quality from the reservoirs to the distribution network were not substantial. The Random Forest algorithm showed superior predictive accuracy, particularly for ECw and SAR, confirming its potential for the reliable forecasting of irrigation water quality. This research emphasizes the importance of integrating time-sensitive monitoring with data-driven predictions of water quality to support sustainable water resources management in agriculture. This integrated approach offers a promising framework for early warning and informed decision-making in the context of increasing drought vulnerability across Mediterranean agro-environments. Full article

Reservoir regulation and river training works are significant factors influencing downstream channel evolution. However, there is still a lack of systematic studies on the evolution patterns under their synergistic impacts. In particular, the adaptability of shoal training works under hydrological variability conditions needs further investigation. The main purpose of this study is to undertake a thorough analysis of the efficacy of river training works related to shoal erosion control and to identify its underlying causes and potential mitigation strategies. By reviewing completed river training works and collecting and analyzing hydrological data of the middle Yangtze River, we developed and applied a hydro-morphological model to simulate the river evolution processes. A systematic evaluation was undertaken on the impact of training works on shoal erosion. The results indicate that the river training works can influence local hydrological and hydrodynamic conditions, thereby enhancing shoals’ resistance to erosion and decelerating shoal shrinkage. However, under altered hydrologic regimes, the effectiveness of training works wanes, thus failing to fully achieve its intended effects. Specifically, the bank protection project attenuated the intensity of scour at the head of the continent by 30% (average annual scour depth reduced from 2.1 m to 1.5 m) and increased the local stability index by 14.5% (from 0.744 to 0.852), but it is still below the critical threshold (1.024). The findings of this study are expected to provide a scientific basis for the planning and implementation of river training works in the Middle Yangtze River and serve as a reference for addressing similar issues in other regions. Full article

Hybrid pumped hydro storage plants, by integrating pump stations between cascade hydropower stations, have overcome the challenges associated with site selection and construction of pure pumped hydro storage systems, thereby becoming the optimal large-scale energy storage solution for enhancing the absorption of renewable energy. However, the multi-energy conversion between pump stations, hydropower, wind power, and photovoltaic plants poses challenges to both their planning schemes and operational performance. This study proposes a multistage stochastic coordinated planning model for cascade hydropower-wind-solar-thermal-pumped hydro storage (CHWS-PHS) systems. First, a Hybrid Pumped Hydro Storage Adaptive Initial Reservoir Capacity (HPHS-AIRC) strategy is developed to enhance the system’s regulation capability by optimizing initial reservoir levels that are synchronized with renewable generation patterns. Then, Non-anticipativity Constraints (NACs) are incorporated into this model to ensure the dynamic adaptation of investment decisions under multi-timescale uncertainties, including inter-annual natural water inflow (NWI) variations and hourly fluctuations in wind and solar power. Simulation results on the IEEE 118-bus system show that the proposed MSSP model reduces total costs by 6% compared with the traditional two-stage approach (TSSP). Moreover, the HPHS-AIRC strategy improves pumped hydro utilization by 33.8%, particularly benefiting scenarios with drought conditions or operational constraints. Full article

Sustainable water management requires integrated approaches balancing competing demands and environmental sustainability. This study introduces the Sustainable Water Optimization Tool (SUWO), an open-source, Python-based simulation-optimization framework for basin-scale surface-water-resources management. SUWO employs the water–energy–food–ecosystem (WEF-E) nexus approach, utilizing a multi-objective genetic algorithm (MOGA) to generate Pareto-optimal solutions and facilitate a trade-off analysis among water uses through simulations of reservoir operations, hydro-energy production, irrigation, and flow regulation. SUWO integrates scenario analysis with multi-criteria decision making (MCDM), enabling the evaluation of various management, climate, and environmental scenarios. The framework was applied to the Sakarya River Basin (SRB) in Türkiye, a rapidly developing region pressured by water infrastructure development, hydroelectric power plants (HEPPs), and irrigation expansion. The SUWO-SRB model showed that while Non-dominated Sorting Genetic Algorithm II (NSGA-II) generally exhibited superior performance, NSGA-III presented a competitive alternative. The optimization results were analyzed across four management scenarios under varying hydrological conditions and environmental management classes (EMCs) for the near future. The model results highlight WEF-E nexus trade-offs. Maximizing energy production often impacts irrigation and the ecosystem, while prioritizing sustainable irrigation can reduce energy output. Dry conditions reduce hydropower and irrigation capacity, emphasizing water scarcity vulnerabilities. Ecological deviation negatively correlates with anthropogenic factors. Full article

Geothermal energy has the advantages of being green, stable, abundant, and renewable. The thermal energy extraction efficiency of an enhanced geothermal system (EGS) is significantly regulated by Thermo–Hydraulic (TH) processes. To accurately evaluate the long-term heat recovery performance of an EGS, the dynamic influence mechanisms under multi-field TH coupling effects must be considered comprehensively. Therefore, in this study, based on the local thermal equilibrium theory, a temperature–seepage coupling model is established using the COMSOL software. The influences of reservoir parameters and fractures on the geothermal energy mining effect are studied, and the distribution law of temperature and pressure in the thermal reservoir is analyzed. The research results provide a reference for EGS reservoir reconstruction and heat recovery efficiency optimization. It is shown that the temperature difference near the injection–production well in the early stage of development leads to the slow recovery of thermal reservoir pressure. When the matrix permeability is greater than 455 mD, the temperature of the production fluid drops too quickly, and the development life of the thermal reservoir is short. The matrix porosity has little effect on the development of thermal reservoirs. When the porosity increases from 0.05 to 0.3, after 40 years of production, the mass flow rate of the produced fluid increases by 3.08%, the temperature of the produced fluid increases by 2.14%, and the heat recovery rate increases by 7.04%. The number of fractures has a significant influence on the development of thermal reservoirs. When the number of fractures increases from 0 to 3, the mass flow rate of production fluid increases by 55.9%, the thermal breakthrough is rapid, and the development life of the thermal reservoir is shortened. Notably, the unreasonable use of cracks will hinder the outward spread of the injected fluid. Full article

Hydraulic jumps are widely used to dissipate excess energy in civil, ocean, and hydro-power engineering, particularly in high dams with large reservoirs. Different inflow and tailwater conditions lead to the occurrence of various types of hydraulic jumps. Among them, A-jumps are often preferred for stilling basin design, due to their high energy dissipation efficiency and favorable outflow patterns. This study numerically investigated the hydraulic characteristics of 75 critical A-jumps by adjusting tailwater levels, considering varying inflow conditions (flow depth, velocity, discharge, and Froude number) and stilling basin parameters (negative step height and incident angle), covering key parameter ranges from existing practical applications in high dam projects. Based on theoretical analysis and numerical simulations, estimation methods are proposed for the key hydraulic parameters of A-jumps, including the sequent depth ratio, roller length, reattachment length, and energy dissipation rate. A correction for the sequent depth ratio, incorporating the influence of the incident angle, is proposed for the first time. These estimation methods offer valuable insights for designing and optimizing negative step stilling basins in various practical engineering scenarios. To validate their applicability, a case study was conducted, showcasing the superior energy dissipation and stable outflow performance of the designed stilling basin, with the basin length shortened by 1.8% and the near-bottom velocity reduced by 42.4%, based on the proposed estimations, compared to the classical stilling basin. Full article