Search Results (33)

As a ferrite material with excellent magnetic and dielectric properties, CoFe₂O₄ is in high demand for applications in areas such as wave absorption and magnetic storage. Effective regulation of its nanoscale morphology is central to improving application performance. Conventional synthesis methods often face challenges including poor particle dispersion and irregular morphology, which limit further optimization of material properties. In this study, a combined approach of microwave hydrothermal synthesis and annealing was employed to systematically investigate the effects of hydrothermal temperature, reaction time, and annealing parameters on the morphology and properties of CoFe₂O₄. The samples were characterized using X-ray diffraction, scanning electron microscopy, energy dispersive spectroscopy, and other techniques. Experimental results show that process parameters exert a notable influence on the crystallinity, particle dispersibility, magnetic and wave-absorbing properties of CoFe₂O₄: the sample prepared by microwave hydrothermal treatment at 75 °C for 30 min exhibits relatively better wave-absorbing performance, with a minimum reflection loss of less than −30 dB and an effective absorption bandwidth covering 8~16 GHz; the sample treated at 100 °C for 15 min shows a more balanced magnetic performance, with the saturation magnetization approaching 60 emu/g. The quantitative structure–property relationships of pure-phase CoFe₂O₄ across microwave hydrothermal and post-annealing processes, and achieve stable, reproducible performance enhancements under optimized mild conditions. These results supplement key experimental data for the low-temperature preparation of CoFe₂O₄ and establish a practical, energy-efficient parameter framework for future structural design and process optimization of this important magnetic material. Full article

To obtain an excellent electromagnetic wave (EMW) absorption material, a strategy was proposed in this study with the aid of in-situ growth of carbon nanotubes (CNTs) on the surface of a metal–organic framework (MOF)-derived FeCoNiMnMg high-entropy alloy (HEA). The HEA@CNT composite was successfully prepared via a solvothermal method combined with a one-step pyrolysis process. With the pyrolysis temperature increasing from 600 °C to 800 °C, the length of CNTs grew from 200 nm to about 600 nm approximately, while the defect density of CNTs was enhanced. This structural evolution significantly improved the dielectric properties and impedance matching. Consequently, the sample prepared at 800 °C (HEA@CNT-800) exhibited outstanding microwave absorption performances, achieving a minimum reflection loss (RL_min) of −57.52 dB at a matched thickness of 2.3 mm and an effective absorption bandwidth (EAB) of 4.4 GHz at a thinner thickness of 1.9 mm. This work provides a novel perspective for designing high-performance MOF-derived absorption materials. Full article

To address the key challenges of non-uniform energy distribution, local overheating, and unstable electromagnetic–thermal coupling in multi-source microwave heating systems, this paper proposes a distributed optimisation cooperative method based on phase–power coordinated control and consensus-feedback constraints. A two-stage multi-agent control mechanism, described as “phase leading, power following”, is constructed within a hierarchical architecture to achieve spatiotemporal collaborative optimisation from the perspectives of electromagnetic interference-field shaping and thermal feedback regulation. In the phase-regulation stage (Innovation 1), adaptive reconstruction of the interference field is achieved through relative phase specification and a two-level scanning mechanism, rapidly shaping the spatial energy distribution and enhancing the absorption efficiency of incident electromagnetic energy in the cavity–material system. In the power-regulation stage (Innovation 2), amplitude correction is performed under a stabilised interference-field background, and a consensus-feedback constrained regional energy collaboration network is established to ensure that regional energy states converge within the convex hull of the leader reference set. Power redistribution is driven by the target–region energy deviation and neighbourhood consistency relationships, enabling spatial reverse balancing of energy density, suppressing excessive heating in high-energy regions, and enhancing compensation in low-energy regions. Furthermore, a spatiotemporal dual-scale coupling consensus-optimisation framework (Innovation 3) is developed to form a cooperative loop between fast electromagnetic-field reconstruction and slow thermal-field dynamics, achieving synchronous improvement in energy utilisation efficiency and temperature-field uniformity with stable convergence. Simulation results demonstrate that, compared with conventional constant-power, single-phase, and single-power control strategies, the proposed method improves heating efficiency by 16.62–44.74%, and enhances temperature uniformity in vertical and horizontal sections by 8.84–55.87% and 11.41–40.54%, respectively. Full article

Microwave heating is a method with a uniform heating effect and environmental friendliness in in-place hot recycling, but the microwave absorption capacity of traditional asphalt mixtures is still insufficient. As an excellent microwave-absorbing material, magnetite powder has the characteristics of high temperature resistance, corrosion resistance, and good thermodynamic stability. This study selects it as the microwave-absorbing material, prepares AC (Asphalt Concrete) type and SMA (Stone Mastic Asphalt) type microwave asphalt mixtures by adjusting its content, and investigates its influence on the microwave-heating characteristics and pavement performance of the mixtures. Simulations of the microwave-heating process of AC-type mixtures using COMSOL software (COMSOL Multiphysics 6.2) show that magnetite powder achieves optimal performance in terms of heating effect and economic efficiency when its content is 0.5%. Subsequently, laboratory tests are conducted to study the wave absorption and temperature rise performance of AC and SMA microwave asphalt mixtures; combined with economic factors, the optimal contents of magnetite powder for the two types of mixtures are determined to be 0.5% and 1%, respectively, and at the same time, these results are explained based on multiple physical theories. Furthermore, pavement performance is investigated through laboratory tests, including high-temperature rutting tests, low-temperature bending tests, immersed Marshall tests, and freeze–thaw cycle durability tests, and the results indicate that the high-temperature performance, low-temperature performance, and water stability of the microwave asphalt mixtures all meet the specification requirements for pavement performance. Subsequently, after 15 freeze–thaw cycles, the splitting tensile strength retention rate and stiffness modulus of the two types of mixtures show minimal differences from those of ordinary mixtures, and there is no durability degradation caused by the incorporation of magnetite powder. Finally, outdoor environment verification is carried out, and the results show that under complex conditions such as environmental factors, the wave absorption and temperature rise rates of AC and SMA mixtures at optimal contents are 52.2% and 14.6% higher than those of ordinary AC and SMA asphalt mixtures, respectively. In addition, these microwave asphalt mixtures have the advantages of both sustainability and reduced carbon emissions. By combining simulation methods and experimental verification, this study finally prepared two types of microwave asphalt mixtures with excellent performance, not only improving the microwave absorption and heating performance of asphalt mixtures, but also reducing environmental pollution and energy consumption, which conforms to the development of green transportation. Full article

SiC nanowires (SiC_nw), due to their excellent dielectric properties, are promising high-temperature absorbing materials. However, the mechanism of their high-temperature absorption still requires further research. Therefore, porous SiC_nw/Si₃N₄ and SiC/Si₃N₄ ceramics with different SiC phase morphologies were fabricated using a simple precursor impregnation and pyrolysis method. The Fe impurity content of the Si₃N₄ powder raw material significantly affects the generation of SiC nanowires. When SiC exists in the form of nanowires, the excellent conductivity brought by the conductive network of the nanowires causes a significant response of the material’s permittivity to temperature. When the test temperature is room temperature, SiC_nw/Si₃N₄ has excellent absorption performance with a minimum reflection loss of −29.75 dB at 2.16 mm and an effective absorption bandwidth of 3.72 GHz at 2.54 mm. As the test temperature increases to 300 °C, the effective absorption bandwidth of SiC_nw/Si₃N₄ covers the entire X-band. The porous SiC_nw/Si₃N₄ ceramics exhibit excellent electromagnetic wave absorption performance, demonstrating significant application potential for high-temperature environments. Full article

Microwave-assisted processing has shown tremendous promise in accelerating chemical reactions and reducing energy consumption through targeted dielectric heating. This study develops MOF-derived Mn-Co and Ce-Co oxide catalysts for energy-efficient benzene oxidation via microwave catalysis. The MnCo spinel oxides (particularly MnCo11-400) exhibit superior microwave absorption and catalytic activity due to enhanced oxygen mobility and tailored dielectric properties. Microwave irradiation enables rapid benzene mineralization over the MnCo11-400 catalyst, achieving 78% conversion at 30 W and complete conversion at 50 W, demonstrating exceptional energy efficiency at low power inputs. Microwaves significantly lower the reaction temperature compared to conventional thermal catalysis (ΔT = 100–250 °C). Stability tests confirm robustness over repeated power cycling (80% conversion retained after 3 × 1 h on/off cycles). Furthermore, an adsorption–microwave oxidation synergistic strategy is demonstrated: pre-adsorbed low-concentration benzene (1.15 mmol) at ambient temperature undergoes complete mineralization within 20 min under 30 W microwave irradiation. The intermittent microwave operation achieves equivalent benzene removal to continuous thermal processing while significantly reducing energy demand. This work establishes MOF-derived spinel oxides as high-performance microwave catalysts for low-temperature VOC abatement. Full article

Metallic magnetic materials are extensively used to mitigate electromagnetic interference due to their high Curie temperatures and permeability. However, their high permittivity often hinders impedance-matching effectiveness, limiting their utility. In this study, amorphous cobalt–iron (Co_100−xFe_x) alloy nanoparticles with relatively low permittivity were synthesized using a simple aqueous reduction method at room temperature. The effect of atomic ratio variation on the microwave absorption properties of these nanoparticles was investigated across 2–18 GHz. The amorphous Co_100−xFe_x nanoparticles exhibited excellent electromagnetic wave absorption performance, achieving an effective absorption bandwidth of 5.6 GHz, a matching thickness of 2.60 mm, and a reflection loss of −42 dB. Full article

MOFs-derived magnetic carbon-based composites are considered to be valuable materials for the design of high-performance microwave absorbents. Regulating phase structures and introducing mixed-valence states within the composites is a promising strategy to enhance their charge transfer properties, resulting in improved microwave absorption performance. In this study, iron oxide components show a temperature-dependent phase evolution process (α-Fe₂O₃→Fe₃O₄→Fe₃O₄/FeO), during which the valence states of iron ions are regulated. The tunable phases modulate the magnetic Fe₃O₄ component, resulting in enhanced magnetic loss. The changed valence states affect the polarization relaxation by adjusting the electronic structure and tune the electron scattering by introducing defects, leading to enhanced dielectric loss. The microwave absorption properties of iron oxide@carbon composites display phase- and valence state-dependent characteristics. Especially, Fe₃O₄@C composites exhibit superior microwave absorption properties, ascribed to the improved magnetic/dielectric losses induced by good impedance matching and strong microwave attenuation capacity. The minimum reflection loss of Fe₃O₄@C composites reaches −73.14 dB at 10.35 GHz with an effective absorption bandwidth of 4.9 GHz (7.69–12.59 GHz) when the absorber thickness is 2.31 mm. This work provides new insights into the adjustment of electromagnetic parameters and microwave absorption properties by regulating the phase and valence state. Full article

TiC provides a promising potential for high-temperature microwave absorbers due to its unique combination of thermal stability, high electrical conductivity, and robust structural integrity. C@TiC/SiO₂ composites were successfully fabricated using a simple blending and cold-pressing method. The effects of C@TiC’s absorbent content and temperature on the dielectric and microwave absorption properties of C@TiC/SiO₂ composites were investigated. The addition of C@TiC from 10 wt.% to 30 wt.% not only endows the composites with a higher dielectric constant and dielectric loss, but also with a greater high-temperature stability in terms of dielectric and microwave absorption properties. The composite with 30 wt.%C@TiC demonstrates a strong microwave absorption capability with a minimum reflection loss (RL_min) of −55.87 dB, −48.49 dB, and −40.36 dB at room temperature, 50 °C, and 100 °C, respectively; the 50 wt.%C@TiC composite exhibits an enhanced high-temperature microwave absorption performance with an RL_min of −16.13 dB and −15.72 dB at 200 °C and 300 °C, respectively. This study demonstrates that the TiC-based absorbers present an innovative solution for high-temperature microwave absorption, providing stability, versatility, and adaptability in extreme operational environments. Full article

The present work aims to study the possibilities of developing silver nanoparticles using natural extracts of grape pomace wastes originating from the native variety of Fetească Neagră 6 Șt. This study focused on investigating the influence of grape pomace extract obtained by two different extraction methods (classical temperature extraction and microwave-assisted extraction) in the phytosynthesis process of metal nanoparticles. The total phenolic content of the extracts was assessed using the spectrophotometric method with the Folin–Ciocâlteu reagent, while the identification and quantification of specific components were conducted through high-performance liquid chromatography with a diode array detector (HPLC-DAD). The obtained nanoparticles were characterized by UV–Vis absorption spectroscopy, X-ray diffraction (XRD), and transmission electron microscopy (TEM), along with assessing their antioxidant and antimicrobial properties against Gram-positive bacteria. The data collected from the experiments indicated that the nanoparticles were formed in a relatively short period of time (96 h) and, for the experimental variant involving the use of a 1:1 ratio (v/v, grape pomace extract: silver nitrate) for the nanoparticle phytosynthesis, the smallest crystallite sizes (from X-ray diffraction—4.58 nm and 5.14 nm) as well as spherical or semispherical nanoparticles with the lowest average diameters were obtained (19.99–23 nm, from TEM analysis). The phytosynthesis process was shown to enhance the antioxidant properties (determined using the DPPH assay) and the antimicrobial potential (tested against Gram-positive strains) of the nanoparticles, as evidenced by comparing their properties with those of the parent extracts; at the same time, the nanoparticles exhibited a selectivity in action, being active against the Staphylococcus aureus strain while presenting no antimicrobial potential against the Enterococcus faecalis strain. Full article

Microwave technology is commonly used in many fields such as wireless communication and medical treatment, which are closely related to social development. However, electromagnetic pollution caused by microwaves is gradually increasing and the demand for high-performance microwave absorption materials is also increasing. Porous materials obtained by the pyrolysis of metal–organic frameworks (MOFs) at high temperatures exhibit good conductivity and magnetism, and the original skeleton structure of MOFs can be maintained; thus, MOF-derived materials can be considered viable candidates of microwave absorption materials. In this paper, Fe-CN@CoCN materials were prepared by pyrolyzing a ferrocene (Fc)-doped core–shell zeolite imidazole framework (Fc-ZIF-8@ZIF-67) at 700, 800, and 900 °C for 2 h in an Ar atmosphere. The obtained Fe-CN@CoCN-0.25-700 nanocomposite exhibited excellent microwave absorption (MA) performance with a minimum reflection loss (RL_min) of −42.27 dB at 5.68 GHz and an effective absorption bandwidth (EAB, RL < −10 dB) of 4.80 GHz at a thickness of 2.5 mm. The Fe-CN@CoCN-0.25-800 nanocomposite possessed optimized MA properties with an RL_min of −40.78 dB at 12.56 GHz and an EAB of 4.16 GHz at relatively low thickness of 2 mm. Fe-CN@CoCN nanocomposites are expected to be efficient materials for microwave absorption coatings. Full article

Although semiconducting metal oxide (SMOx) nanoparticles (NPs) have attracted attention as sensing materials, the methodologies available to synthesize them with desirable properties are quite limited and/or often require relatively high energy consumption. Thus, we report herein the processing of Zn-doped SnO₂ NPs via a microwave-assisted nonaqueous route at a relatively low temperature (160 °C) and with a short treatment time (20 min). In addition, the effects of adding Zn in the structural, electronic, and gas-sensing properties of SnO₂ NPs were investigated. X-ray diffraction and high-resolution transmission electron microscopy analyses revealed the single-phase of rutile SnO₂, with an average crystal size of 7 nm. X-ray absorption near edge spectroscopy measurements revealed the homogenous incorporation of Zn ions into the SnO₂ network. Gas sensing tests showed that Zn-doped SnO₂ NPs were highly sensitive to sub-ppm levels of NO₂ gas at 150 °C, with good recovery and stability even under ambient moisture. We observed an increase in the response of the Zn-doped sample of up to 100 times compared to the pristine one. This enhancement in the gas-sensing performance was linked to the Zn ions that provided more surface oxygen defects acting as active sites for the NO₂ adsorption on the sensing material. Full article

The challenge of developing a high-efficiency microwave absorbent remains, because of the compatibility between microwave absorption and high-temperature-resistant performance in practical application. Herein, a facile method is used to obtain serial MXene/BN-zxy composites, where zx:y indicates the weight ratio of MXene and boron nitride (BN) in the composites, with adjustable microwave absorption performance (MAP) which can be regulated by the ratio of MXene and the BN nanosheet. In particular, the as-prepared absorbents with supercapacitance-like structure significantly enhanced the MAP and could be served more than 900 °C. The results of MAP reveal that the minimum reflection loss (RL) can reach −20.94 dB with a MXene/BN-101 composite coating thickness of 4.0 mm; the effective attenuation bandwidth (RL< −10 dB, i.e., 90% microwave energy is attenuated) is up to 9.71 GHz (7.94–17.65 GHz). From a detailed analysis, it is observed that attenuation is the critical limiting factor for MAPs rather than impedance mismatch, which can be assigned to the poor MAP of BN nanosheets. In any case, as-prepared absorbents have potential applications in the field of heating components. Full article

Enhancing the conductivity loss of SiC nanowires through doping is beneficial for improving their electromagnetic wave absorption performance. In this work, N-doped SiC nanowires were synthesized using three different methods. The results indicate that a large amount of Si₂ON will be generated during the microwave synthesis of SiC nanowires in a nitrogen atmosphere. In addition, the secondary heat-treatment of the as-synthesized SiC nanowires under nitrogen atmosphere will significantly reduce their stacking fault density. When ammonium chloride is introduced as a doped nitrogen source in the reaction raw material, the N-doped SiC nanowires with high-density stacking faults can be synthesized by microwave heating. Therefore, the polarization loss induced by faults and the conductivity loss caused by doping will synergistically enhance the dielectric and EMW absorption properties of SiC nanowires in the range of 2–18 GHz. When the filling ratio of N-doped SiC nanowires is 20 wt.%, the composite shows a minimum reflection loss of –22.2 dB@17.92 GHz, and an effective absorption (RL ≤ –10 dB) bandwidth of 4.24 GHz at the absorber layer thickness of 2.2 mm. Further, the N-doped SiC nanowires also exhibit enhanced high-temperature EMW absorption properties with increasing temperature. Full article

Microwave-absorbing materials have attracted extensive attention due to the development of electronic countermeasures. In this study, novel nanocomposites with core–shell structures based on the core of Fe-Co nanocrystals and the shell of furan methylamine (FMA)-modified anthracite coal (Coal-F) were designed and fabricated. The Diels-Alder (D-A) reaction of Coal-F with FMA creates a large amount of aromatic lamellar structure. After the high-temperature treatment, the modified anthracite with a high degree of graphitization showed an excellent dielectric loss, and the addition of Fe and Co effectively enhanced the magnetic loss of the obtained nanocomposites. In addition, the obtained micro-morphologies proved the core–shell structure, which plays a significant role in strengthening the interface polarization. As a result, the combined effect of the multiple loss mechanism promoted a remarkable improvement in the absorption of incident electromagnetic waves. The carbonization temperatures were specifically studied through a setting control experiment, and 1200 °C was proved to be the optimum parameter to obtain the best dielectric loss and magnetic loss of the sample. The detecting results show that the 10 wt.% CFC-1200/paraffin wax sample with a thickness of 5 mm achieves a minimum reflection loss of −41.6 dB at a frequency of 6.25 GHz, indicating an excellent microwave absorption performance. Full article