Search Results (403)

The dispersion behavior of ceramic particles in aluminum alloys during rapid solidification critically affects the resulting microstructure and mechanical performance. In this study, we investigated the nucleation and growth of Al₃(Sc,Zr) on TiB₂ surfaces in a 2TiB₂/Al–8Ni–0.6Sc–0.1Zr alloy, fabricated via wedge-shaped copper mold casting and laser surface remelting. Thermodynamic calculations were employed to optimize alloy composition, ensuring sufficient nucleation driving force under rapid solidification conditions. The results show that the formation of Al₃(Sc,Zr)/TiB₂ composite interfaces is highly dependent on cooling rate and plays a pivotal role in promoting uniform TiB₂ dispersion. At an optimal cooling rate (~1200 °C/s), Al₃(Sc,Zr) nucleates heterogeneously on TiB₂, forming core–shell structures and enhancing particle engulfment into the α-Al matrix. Orientation relationship analysis reveals a preferred (111)α-Al//(0001)TiB₂ alignment in Sc/Zr-containing samples. A classical nucleation model quantitatively explains the observed trends and reveals the critical cooling-rate window for composite interface formation. This work provides a mechanistic foundation for designing high-performance aluminum-based composites with uniformly dispersed reinforcements for additive manufacturing applications. Full article

Highly integrable silicon carbide (SiC) has emerged as a promising platform for photonic integrated circuits (PICs), offering a comprehensive set of material and optical properties that are ideal for the integration of nonlinear devices and solid-state quantum defects. However, despite significant progress in nanofabrication technology, the development of SiC on an insulator (SiCOI)-based photonics faces challenges due to fabrication-induced material optical losses and complex processing steps. An alternative approach to mitigate these fabrication challenges is the direct deposition of amorphous SiC on an insulator (a-SiCOI). However, there is a lack of systematic studies aimed at producing high optical quality a-SiC thin films, and correspondingly, on evaluating and determining their optical properties in the telecom range. To this end, we have studied a single-source precursor, 1,3,5-trisilacyclohexane (TSCH, C₃H₁₂Si₃), and chemical vapor deposition (CVD) processes for the deposition of SiC thin films in a low-temperature range (650–800 °C) on a multitude of different substrates. We have successfully demonstrated the fabrication of smooth, uniform, and stoichiometric a-SiCOI thin films of 20 nm to 600 nm with a highly controlled growth rate of ~0.5 Å/s and minimal surface roughness of ~5 Å. Spectroscopic ellipsometry and resonant micro-photoluminescence excitation spectroscopy and mapping reveal a high index of refraction (~2.7) and a minimal absorption coefficient (<200 cm⁻¹) in the telecom C-band, demonstrating the high optical quality of the films. These findings establish a strong foundation for scalable production of high-quality a-SiCOI thin films, enabling their application in advanced chip-scale telecom PIC technologies. Full article

The behavior of brine solution in the porous media of the strata is of great significance for geological environment regulation. In this study, a molecular dynamics model with silicon dioxide walls was constructed to reveal the regulatory mechanism of the natural potential of the electric field on cluster aggregation. It was found that the critical electric field intensity was 7 V/m. When the electric field intensity was lower than this value, the aggregation rate was only increased by 0.73 times due to thermal motion; when it was higher than this value, the rate increased sharply by 3.2 times due to the dominant effect of electric field force. The microscopic structure analysis indicated that the strong electric field induced the transformation of clusters from fractal structure into an amorphous structure (the index of the order degree increased by 58%). The directional regulation experiments confirmed that the axial electric field led to anisotropic growth (the index of uniformity increased by 0.58 ± 0.04), and the rotational electric field could achieve a three-dimensional uniform distribution (the index of uniformity increased by 42%). This study provides theoretical support for the regulation of brine behavior and the optimization of geological energy storage. Full article

Crystalline products with a narrow and uniform distribution of crystals by size (CSD), characterized by a desired average size, are necessary in many practices. Therefore, extensive, but mostly experimental, research is devoted to the problem of obtaining such CSDs. Alternatively, this manuscript presents a theoretical approach for calculating CSD resulting from crystallization in unstirred solutions. First, classical equations for the rates of diffusion-controlled and kinetically controlled growth of crystals are used to discuss the size-dependent growth of the nucleated crystals and the initial CSD (which arises from the non-simultaneous nucleation of crystals). Then, applying the law of conservation of matter, it is proved that the CSD continues to expand during the growth stage. Furthermore, it is substantiated that, due to their uneven spatial distribution, crystals of the same size can grow at different rates. This depends on whether the crystals are outside the diffusion fields of other crystals or are clustered together in “nests”. Moreover, by calculating the growth rates of crystals in “nests”, an explanation is given for the observation that closely spaced crystals are smaller in size than the separately growing crystals. Finally, the CSD established during the Ostwald ripening is discussed quantitatively, step-by-step. Full article

Salbutamol sulfate is a selective β2-receptor agonist used to treat asthma and chronic obstructive pulmonary disease. The crystals of salbutamol sulfate usually appear as needles with a relatively large aspect ratio, showing poor powder properties. In this study, spherical particles of salbutamol sulfate were obtained via antisolvent crystallization. Four different antisolvents, including ethanol, n-propanol, n-butanol, and sec-butanol, were selected, and their effects on crystal form and morphology were compared. Notably, a new solvate of salbutamol sulfate with sec-butanol has been obtained. The novel crystal form was characterized by single-crystal X-ray diffraction, revealing a 1:1 stoichiometric ratio between solvent and salbutamol sulfate in the crystal lattice. In addition, the effects of crystallization temperature, solute concentration, ratio of antisolvent to solvent, feeding rate, and stirring rate on the morphology of spherical particles were investigated in different antisolvents. We have found that crystals grown from the n-butanol–water system at optimal conditions (25 °C, antisolvent/solvent ratio of 9:1, and drug concentration of 0.2 g·mL⁻¹) could be developed into compact and uniform spherulites. The morphological evolution process was also monitored, and the results indicated a spherulitic growth pattern, in which sheaves of plate-like crystals gradually branched into a fully developed spherulite. This work paves a feasible way to develop new crystal forms and prepare spherical particles of pharmaceuticals. Full article

In this study, the effects of post-weld heat treatment (PWHT) on residual stress distribution and fatigue crack propagation (FCP) behavior in linear friction welded (LFW) Ti-6Al-4V joints were investigated. Microstructural evolution in the weld center zone (WCZ), thermomechanically affected zone (TMAZ), heat-affected zone (HAZ), and base metal (BM) was characterized using scanning electron microscropy (SEM) and electron backscatter diffraction (EBSD). Mechanical properties were evaluated via Vickers hardness testing and digital image correlation (DIC)-based tensile testing. Residual stresses before and after PWHT were measured using the contour method. The LFW process introduced significant residual stresses, with tensile stresses up to 709.2 MPa in the WCZ, resulting in non-uniform fatigue crack growth behavior. PWHT at 650 °C and 750 °C effectively reduced these stresses. After PWHT, fatigue cracks propagated uniformly across the weld region, enabling reliable determination of crack growth rates. The average crack growth rates of the heat-treated specimens were comparable to those of the base metal, confirming that PWHT, particularly at 750 °C, stabilizes the fatigue crack path and relieves internal stress. Full article

Background: To overcome the limitations of conventional CRC (colorectal cancer) mouse models in replicating metastasis and enabling efficient therapeutic evaluation, we developed a novel implantation method using tissue adhesive to establish reproducible orthotopic and metastatic tumors. Conventional models using injection or suturing techniques often suffer from technical complexity, inconsistent tumor establishment, and limited metastatic reliability. Methods: We developed and validated a novel orthotopic and metastatic CRC model utilizing tissue adhesive for tumor transplantation. Uniform tumor fragments derived from bioluminescent HCT116/Luc xenografts were affixed to the cecum of nude mice. Tumor growth and metastasis were monitored through bioluminescence imaging and confirmed by the results of histological analysis of metastatic lesions. The model’s utility for therapeutic testing was evaluated using MK801, an NMDA receptor antagonist. Results: The biological-based model demonstrated rapid and reproducible tumor implantation (<5 min), consistent primary tumor growth, and robust metastasis to the liver and lungs. The biological-based approach achieved 80% tumor engraftment (4/5), with consistent metastasis to the liver and lungs in all mice, compared with lower and variable metastasis rates in injection (0%, 0/5) and suturing (20%, 1/5) methods. MK801 treatment significantly suppressed both primary tumor growth and metastasis, validating the model’s suitability for preclinical drug evaluation. Conclusions: By enabling rapid, reproducible, and spontaneous formation of metastatic lesions using a minimally invasive tissue adhesive technique, our model represents a significant methodological advancement that supports high-throughput therapeutic screening and bridges the gap between experimental modeling and clinical relevance in colorectal cancer research. Full article

The hard-seed coat of Ormosia henryi significantly impedes germination efficiency in massive propagation, while conventional physical dormancy-breaking methods often result in compromised seed vigor, asynchronous seedling emergence, and diminished stress tolerance. Seed biopriming, an innovative technique involving the inoculation of beneficial microorganisms onto seed surfaces or into germination substrates, enhances germination kinetics and emergence uniformity through microbial metabolic functions and synergistic interactions with seed exudates. Notably, spermosphere-derived functional bacteria isolated from native spermosphere soil demonstrate superior colonization capacity and sustained bioactivity. This investigation employed selective inoculation of these indigenous functional strains to systematically analyze dynamic changes in endogenous phytohormones, enzymatic activities, and storage substances during critical germination phases, thereby elucidating the physiological mechanisms underlying biopriming-enhanced germination. The experimental results demonstrated significant improvements in germination parameters through biopriming. Inoculation with the Bacillus sp. strain achieved a peak germination rate (76.19%), representing a 16.19% increase over the control (p < 0.05). The biopriming treatment effectively improved the seed vigor, broke the impermeability of the seed coat, accelerated the germination speed, and positively regulated physiological indicators, especially amylase activity and the ratio of gibberellic acid to abscisic acid. This study establishes a theoretical framework for microbial chemotaxis and rhizocompetence in seed priming applications while providing an eco-technological solution for overcoming germination constraints in O. henryi cultivation. The optimized biopriming protocol addresses both low germination rates and post-germination growth limitations, providing technical support for the seedling cultivation of O. henryi. Full article

Pinus radiata D. Don is planted in South Central Chile on a wide range of sites using genetically improved genotypes for timber production. As drought events are expected to increase with ongoing climatic change, the variability in gas exchange, which could impact growth and water use, needs to be evaluated. In this study, we assessed the genotypic variability of leaf-level light-saturated photosynthesis (A_sat), stomatal conductance (g_s), transpiration (E), intrinsic water use efficiency (iWUE), and Chlorophyll a fluorescence (OJIP-test parameters) among 30 P. radiata genotypes (i.e., full-sib families) from third-cycle parents at age 6 years on three sites in Central Chile. We also evaluated tree height (HT), diameter at breast height (DBH), and stem index volume (VOL). Families were ranked for HT as top-15 and bottom-15. In the OJIP-test parameters we observed differences at the family level for the maximum quantum yield of primary PSII photochemistry (Fv/Fm), the probability that a photon trapped by the PSII reaction center enters the electron transport chain (ψ_Eo), and the potential for energy conservation from photons captured by PSII to the reduction in intersystem electron acceptors (PI_ABS). Fv/Fm, PI_ABS, and ψ_Eo ranged from 0.82 to 0.87, 45 to 95, and 0.57 to 0.64, respectively. Differences among families for growth and not for leaf-level physiology were detected. DBT, H, and VOL were higher in the top-15 families (12.6 cm, 8.4 m, and 0.10 m³, respectively) whereas A_sat, g_s, E, and iWUE were similar in both the top-15 and bottom-15 families (4.0 μmol m⁻² s⁻¹, 0.023 mol m⁻² s⁻¹, 0.36 mmol m⁻² s⁻¹, and 185 μmol mol m⁻² s⁻¹, respectively). However, no family by site interaction was detected for growth and leaf-level physiology. The results of this study suggest that highly improved genotypes of P. radiata have uniformity in leaf-level physiological rates, which could imply uniform water use at the stand-level. The family variation found in PI_ABS suggests that this parameter could be incorporated to select genotypes tolerant to environmentally stressful conditions. Full article

Coenzyme Q₁₀ (CoQ₁₀) has attracted widespread attention in recent years due to its momentous physiological functions. Microbial fermentation is the major method in CoQ₁₀ industrial production, and Rhodobacter sphaeroides is the main strain for the production of CoQ₁₀ by fermentation. Optimization of the culture medium is a popular solution to improve the metabolite production. Culture medium is the material basis for microbial growth and product synthesis, of which inorganic salts are a key ingredient. Uniform design (UD), artificial neural network (ANN), and genetic algorithm (GA) are the main research methods. Through uniform design (UD) and artificial neural network/genetic algorithm (ANN-GA) progressive optimization, an optimal formulation of the inorganic salts in fermentation medium was obtained (g·L⁻¹): MgSO₄ 12, NaCl 2.5, FeSO₄ 1.6, KH₂PO₄ 0.8, MnSO₄ 0.1, CaCl₂ 0.1. Ultimately, the fermentation yield of CoQ₁₀ could reach 255.36 mg·L⁻¹. ANN-GA exhibited a superior prediction capability compared to UD. Compared to UD, the optimization results of ANN-GA had a smaller relative error (ANN-GA 1.23%; UD 3.01%) and a higher increase rate in the fermentation level of CoQ₁₀ (ANN-GA 4.1%; UD 2.04%). R. sphaeroides had a high demand for Mg²⁺. Full article

Weak seedlings and poor growth uniformity affect the mechanical transplanting of densely sown rice seedlings. To address these issues, seedlings of the conventional japonica rice “Zhehexiang 2” were grown in a traditional flat tray (control), pot-mat tray (26 × 52 bowls; BT(26)), and pot-mat tray (30 × 58 bowls; BT(30)) to compare the effects of different specifications of pot-mat trays (BTs) on the growth and quality of mechanical transplanting of densely sown rice seedlings with 250 g/tray. The BT-raised seedlings showed improved seedling quality, with increases in the shoot and root dry weights by 7.44% and 20.11%, respectively, compared to the flat tray. Under the dense sowing rate, the plant height uniformity of the BT(26) and BT(30) treatments was significantly increased by 6.95% and 3.43%, and the root entwining force of the seedlings was 14.28% and 10.21% higher, respectively, compared with those of the control. The missing hill rate for BT-raised seedlings after mechanical transplanting was significantly reduced by 53.15%. The loss of roots during mechanical transplanting was reduced. Compared with the control, the root length, root surface area, and root number were increased, and a greater number of large roots were retained, which promoted the early development of seedlings after mechanical transplanting. The proportion of holes with two to five seedlings was higher after mechanical transplanting. The pot-mat tray divided the root growth area of seedlings, promoted the growth of the seedlings, and reduced the root loss and missing hill rate under the high sowing rate. Thus, the quality of mechanical transplanting of densely sown seedlings was improved. Full article

Eukaryotic cells double their mass and divide at the same rate, allowing cells to maintain a uniform cell size over many cell divisions. We hypothesize that aneuploid cancer cells are more sensitive to forced overgrowth, more than doubling their mass during a single longer-duration cell division cycle, relative to healthy diploid cells. This hypothesis stems from the observation that cancer cells are under proteotoxic stress, during which heat-shock proteins become rate-limiting and the unfolded-protein response network has a growth-suppressive phenotype. Forced overgrowth will lead to the production of more individual proteins per cell division cycle and increase the duration of time during which any mis-folded or aggregated proteins might disrupt the function of properly folded proteins. To induce these potential forced overgrowth effects, we suggest targeting the cell division cycle regulatory enzyme, the anaphase-promoting complex/cyclosome (APC/C), to suppress—but not inhibit—its activity. We conclude by proposing experiments to test this hypothesis in which an APC/C inhibitor, such as a low level of proTAME, is combined with the clinically approved heat-shock protein 90 (HSP90)-inhibitor pimitespib (TAS-116) or the pre-clinical molecule tanespimycin, which, to the best of our knowledge, are combinations that have not been investigated before. Full article

This study investigated how corporate maturity—measured through firm age and lifecycle stage—moderates the value relevance of Environmental, Social, and Governance (ESG) disclosures in a frontier market context, using Bangladesh as a case study. Drawing on panel data from 2011–2012 to 2023–2024 for 86 publicly listed non-financial firms, the study employed a modified Ohlson valuation framework, panel regression analysis, and multiple robustness techniques (2SLS, PSM). ESG disclosure was measured using a researcher-developed index aligned with international reporting standards (GRI, SASB, TCFD, UN SDGs). ESG disclosures are positively associated with firm value, but this relationship is significantly moderated by corporate maturity. Younger firms exhibit a stronger valuation effect from ESG transparency, driven by higher signaling and legitimacy needs. In contrast, mature firms experience a diminished marginal benefit, reflecting routine compliance rather than strategic differentiation. These findings challenge the uniform application of ESG assessment models and suggest the need for lifecycle-adjusted disclosure ratings, particularly in nascent regulatory environments like Bangladesh. Investors and regulators should tailor ESG evaluation criteria by firm age and industry sustainability exposure. Younger firms, often overlooked, may carry outsized ESG signaling value in emerging markets. Enhancing ESG transparency among younger firms can foster greater stakeholder trust, support inclusive growth, and strengthen social accountability in emerging economies. This study contributes to the ESG literature by introducing corporate maturity as a key moderating variable in value relevance analysis. It provides new empirical insights from a developing economy and proposes lifecycle-based adaptations to global ESG rating methodologies. Full article

Ammonia fuel is regarded as a promising zero-carbon alternative to diesel in next-generation marine engines. However, the high-temperature ammonia-rich environment poses significant corrosion challenges to hot-end components such as valves. This study investigates the corrosion behavior of Ni80A alloy marine valves under the coupled effects of a high temperature and ammonia atmosphere. Using computational fluid dynamics (CFD), the service temperature of the valve and the ammonia concentration distribution inside the engine cylinder were identified. High-temperature corrosion experiments were conducted with a custom-designed setup. Results show that corrosion kinetics accelerated markedly with temperature: the initial corrosion rate at 800 °C was four times that at 500 °C, and the maximum corrosion layer thickness reached 37 μm—double that at lower temperatures. Microstructural analysis revealed a transition from a dense, defect-free corrosion layer at 500 °C to a non-uniform layer with coarse CrN particles and aggregated nitrides at 800 °C. Notably, surface hardness increased at both temperatures, peaking at 590 HV at 500 °C, while matrix hardness at 800 °C declined due to γ′ phase coarsening and grain growth. This work provides detailed insight into the temperature-dependent ammonia corrosion mechanisms of marine Ni-based alloy valves, offering essential data for material design and durability assessment in ammonia-fueled marine engines. Full article

A novel ultrahigh-strength steel with Co and strengthened through nanoscale precipitation was developed. We found that the Co element had a synergistic effect on the precipitation process. The simulation results indicate that adding Co to steel can suppress the tracer diffusion coefficients of all the elements in the steel, hindering the atomic self-diffusion rate and long-range diffusion effect. A decrease in the atomic diffusion rate of precipitations will affect the nucleation, distribution, and growth of precipitations. The Atom probe tomography (APT) results indicate that the Co element not only dispersed uniformly in the matrix itself but also induced the uniform distribution of the precipitation phases. During the nucleation process of the precipitation, the rejected Co atoms formed small regions of high Co concentrations around the precipitation, inhibiting the coarsening of the precipitation. Under the synergistic effect of Co, the high number density of nanoscale NiAl and M₂C enhanced the strength of the steel. Full article