Search Results (31)

This paper reviews, analyses, and suggests practical mitigation techniques at source for reducing vibration-induced annoyance to occupants in building structures that are built on top of significant railway infrastructure. The dynamic characteristics of vibration caused by wheel-rail interaction at metro train depots are different from those on main-lines and conventional studies. Ground-borne vibration in a building directly above a double-deck railway depot was investigated, focusing on vibration attenuation through rail track design, which is more effective and economic compared to treatments at receivers or along prorogation paths. A 2.5-Dimensional finite element model was established to simulate vibration transmission using different combinations of track-forms. Source contribution under different train running conditions has been evaluated by computing vibration levels along the main transmission path. Vibration levels at representative positions in the building rooms have been predicted using the numerical model and have been compared against site measurements at the corresponding locations after the completion of the construction of the depot and buildings. It was found that the 2.5D FE model enables a reasonable prediction of ground-borne vibration from the metro depot, and that by appropriate design of the track-form, a good level of vibration attenuation can be achieved in an economical way. Full article

Ground-borne vibrations caused by railway traffic represent a significant environmental concern, particularly in densely populated or vibration-sensitive urban areas. These phenomena can lead to discomfort and annoyance among residents, interfere with the operation of sensitive equipment, and even threaten the integrity of heritage sites or structurally vulnerable buildings and infrastructures. Building on these concerns, this paper presents a comprehensive review of the current state of knowledge on the subject. It begins by examining the impacts of ground-borne vibrations on both people and structures, followed by an overview of the regulatory frameworks implemented in different countries to manage these effects, with a focus on four examples from Europe and North America. The review then systematically explores the key factors associated with the generation and propagation of ground-borne noise and vibrations. Furthermore, prediction methodologies are categorised into four groups—analytical and semi-analytical, numerical, empirical and AI-based models—and critically assessed. Finally, the paper reviews mitigation strategies applied at the source, along the propagation path, and at the receiver, assessing their effectiveness in reducing the identified impacts. Full article

This study provides a comprehensive review of advancements in the field of train–track–subway system interaction dynamics and suggests future directions for research and development. Mathematical modeling of train–track–subway interaction system is addressed, including wheel–track contact mechanics and wear, train multibody dynamics, train–track system coupling dynamics, track slab subsystem dynamics, subway tunnel–ground interaction models, building vibration excited by ground-borne seismic waves, and noise. Advanced computing and simulation techniques used for numerical studies of the dynamics of train–track–subway system interaction in the past two decades are also addressed, including high-performance computing with efficient algorithms, multi-physics and multi-scale simulation, real-time hardware-in-the-loop simulation, and laboratory and field validation. The study extends the applications of train–track–subway interaction dynamics to subway route planning, structural and material design, subway maintenance, operations safety and reliability, and passenger comfort. Emerging technologies and future perspectives are also reviewed and discussed, including artificial intelligence, smart sensing and real-time monitoring, digital twin technology, and sustainable design integration. Full article

The application of dynamic vibration absorbers (DVAs) is a countermeasure to suppress vibrations induced by railway traffic. A key advantage of the DVA application is that it does not require any changes to the path of vibration propagation or the receiver of vibration. A review of the literature reveals the necessity of deriving the optimum properties of DVA to mitigate railway vibrations. To this end, the optimum DVA properties were investigated through the development of a two-dimensional finite element model of the track-tunnel-soil system. The model was validated using the results of a field test. A parametric study was made to obtain the optimum properties of DVA for different soils surrounding the tunnel. The results of the model analysis indicate that the DVA has better vibration reduction for metro tunnels built in soft soils as compared to those surrounded by medium and stiff soils. Also, the results disclose that the DVA reduces vibration radiated on the ground surface when the DVA natural frequency is tuned to a low frequency. Using the results of the parametric study, graphs are suggested to select the optimum properties of the DVA as a function of the soil around the tunnel. Full article

This paper introduces a novel 3D simulation framework that integrates the Pipe-in-Pipe (PiP) model with Finite Element Analysis (FEA) using Ansys Parametric Design Language (APDL). This framework is designed to incorporate a 3D building model directly, assessing ground-borne vibrations from metro tunnels and their impact on surrounding structures. The PiP model efficiently calculates displacement fields around tunnels in full-space, applying the resulting fictitious forces to the FEA model, which includes a directly coupled 3D building model. This integration allows for precise simulation of vibration propagation through soil into buildings. A comprehensive verification test confirmed the model’s accuracy and reliability, demonstrating that the hybrid PiP-FEA model achieves significant computational savings-approximately 40% in time and 65% in memory usage-compared to the traditional full 3D FEA model. The results exhibit strong agreement between the PiP-FEA and full FEA models across a frequency range of 1–250 Hz, with less than 1% deviation, highlighting the effectiveness of the PiP-FEA approach in capturing the dynamic behavior of ground-borne vibrations. Additionally, the methodology developed in this paper extends beyond the specific case study presented and shows potential for application to various urban vibration scenarios. While the current validation is limited to numerical comparisons, future work will incorporate field data to further support the framework’s applicability under real metro-induced vibration conditions. Full article

Driven piles are a common geotechnical solution for foundations in weak soil profiles. However, hammer impacts during the driving process can generate excessive levels of ground vibration, which, in extreme cases, can affect nearby structures and people. Due to the complexity of wave propagation in soils, the accurate prediction of these vibrations typically requires advanced numerical modeling approaches. To address this challenge, a surrogate modeling framework was developed by integrating Artificial Neural Networks (ANNs) and Extreme Gradient Boosting (XGBoost), trained on a synthetic dataset generated from an experimentally validated numerical model. The proposed surrogate model enables the rapid prediction of ground vibration characteristics, including peak particle velocity (PPV) and frequency content, across a broad range of soil, pile, and hammer conditions. In addition to its predictive capabilities, the tool allows users to design a specific mitigation measure (open trench) and compare the vibration levels with international standards. Experimental validation confirmed the model’s ability to replicate field measurements with acceptable accuracy. The expedited prediction tool is available as supplemental data and can be used by other researchers and technicians for quick and accurate ground vibration predictions. Full article

Low-frequency seismic vibrations extremely limit the performance of ground simulation facilities for space-borne gravitational wave detections, which need to be substantially suppressed. Active vibration systems are thus required. However, the tilt-translation coupling of inertial sensors strongly limits the performance of vibration isolation platforms in the low frequency range, which requires a precise measurement of the low-frequency tilt signal. This study compares two methods for the tilt signal measurement: the differential-mode method and the direct method. The differential-mode method estimates tilt signals by analyzing differential motion between two inertial sensors, while the direct method utilizes an interferometric tilt sensor (ITS) which consists of a suspended rotational beam system and an interferometer for the readout. Experimental results show that ITS achieves a lower noise floor. Its noise floor is dominated by the thermal-mechanical noise below 0.25 Hz and the readout noise of the interferometer above 0.25 Hz. The findings highlight the potential of ITS for improving the performance of vibration isolation platforms in the low-frequency range. Full article

This research develops and evaluates a recyclable corrugated cardboard vibration isolation box reinforced with balsa wood as an alternative to traditional open trench methods for mitigating ground-borne environmental body waves. This study includes designing and testing scaled prototypes, laboratory analyses, prototype fabrication, and full-scale field experiments. In soft ground conditions, ensuring slope stability during deep excavations is a key engineering challenge for open trenches. For this purpose, scaled prototypes were subjected to laboratory tests to assess the resistance of the wave barrier’s wall surface. Numerical analyses were also conducted to evaluate the strength of the internal lattice structure under various loads. A prototype was fabricated for on-site experiments simulating real-world conditions. Field experiments evaluated the vibration isolation performance of the proposed barrier. Accelerometer sensors were strategically placed to gather data, analyzing ground surface vibrations for free field motions to assess the vibration shielding efficiency of both the open trench method and the corrugated vibration isolation box, with and without Styrofoam infill. This study concludes that the recyclable corrugated vibration isolation box is a viable alternative, offering comparable or improved vibration isolation efficiency in soft soil conditions while promoting environmental sustainability using recyclable materials. Full article

This paper presents a sensitivity analysis to assess the impact of random rail unevenness profiles on the generation of ground-borne vibrations. The random profiles are generated from a power spectral density function, assuming that the uneven rail surface is governed by a stationary Gaussian random process in space. Different proposals are employed to generate these profiles. A previously validated PiP model is used to perform a set of parametric studies, involving the dynamic simulation of a train–track–tunnel–ground system. It was found that the number of harmonics in generating ground-borne vibrations has a residual impact on the evaluated vibration levels. The main differences observed, although not significant, are attributed to the stochastic nature of the rail unevenness profile. More critically, it is important to highlight that different existing approaches for generating the PSD function have a pronounced impact on the evaluated vibration levels. Full article

Predictive numerical models in the study of ground-borne vibrations generated by railway systems have traditionally relied on the subsystem partition approach (segmented). In such a method, loads are individually applied, and the cumulative effect of the rolling stock is obtained through superposition. While this method serves to mitigate computational costs, it may not fully capture the complex interactions involved in ground-borne vibrations—especially in the frequency domain. Recent advancements in computation and software have enabled the development of more sophisticated vibrational contamination prediction models that encompass the entire dynamics of the system, from the rolling stock to the terrain, allowing continuous simulations with a defined time step. Furthermore, the incorporation of computational contact mechanics tools between various elements not only ensures accuracy in the time domain but also extends the analysis into the frequency domain. In this novel approach, the segmented models are shifted to continuous simulations where the nonlinear problem of a rigid–flexible multibody system is fully considered. The model can predict the impact of a high-speed rail (HSR) vehicle passing, capturing the key intricacies of ground-borne vibrations and their impact on the surrounding environment due to a deeper comprehension of the occurrences in the frequency domain. Full article

This paper introduces an efficient computational procedure for analyzing the propagation of harmonic waves in layered elastic media. This offers several advantages, including the ability to handle arbitrary frequencies, depths, and the number of layers above an elastic half-space, and efforts to follow dispersion curves and flag up possible singularities are investigated. While there are inherent limitations in terms of computational accuracy and capacity, this methodology is straightforward to implement for studying free or forced vibrations and obtaining relevant response data. We present computations of wavenumber dispersion diagrams, phase velocity plots, and response data in both the frequency and time domains. These computational results are provided for two example cases: plane strain and axisymmetry. Our methodology is grounded in a well-conditioned dynamic stiffness approach specifically tailored for deep-layered strata analysis. We introduce an innovative method for efficiently computing wavenumber dispersion curves. By tracking the slope of these curves, users can effectively manage continuation parameters. We illustrate this technique through numerical evidence of a layer resonance in a real-life case study characterized by a fold in the dispersion curves. Furthermore, this framework is particularly advantageous for engineers addressing problems related to ground-borne vibrations. It enables the analysis of phenomena such as zero group velocity (ZGV), where a singularity occurs, both in the frequency and time domains, shedding light on the unique characteristics of such cases. Given the reduced dimension of the problem, this formulation can considerably aid geophysicists and engineers in areas such as MASW or SASW techniques. Full article

Road traffic transportation has flourished in the process of urbanization due to its advantages, but concurrently it generates harmful environmental vibrations. This vibration issue becomes particularly crucial in production workshops housing precision instruments. However, limited research has been undertaken on this matter. This study aimed to investigate the influence of road traffic-induced vibration on micro-vibrations within a workshop housing precision instruments. A field test was conducted to assess the vibration levels originating from both machinery operation and vehicular traffic. The results indicated that ground-borne vibrations caused by road vehicles decrease with increasing propagation distance, peaking around 10 Hz. Machinery operation vibrations were primarily concentrated above 20 Hz, while vehicular traffic vibrations were more prominent below 20 Hz. Notably, the passage of heavy trucks significantly impacted both ground and workshop vibrations, with vertical vibrations being particularly significant. Within the workshop, the second floor experienced higher vibrations above 20 Hz due to the presence of installed instruments. Importantly, the micro-vibration levels on both floors exceeded the VC-C limit (12.5 µm/s), highlighting the need to account for road traffic and machinery vibrations in workshop design. These data can be utilized to validate numerical models for predicting road traffic-induced vibrations, aiding in vibration assessment during road planning and design. Full article

In order to enhance the predictive accuracy and control capabilities pertaining to low- and medium-frequency road noise in automotive contexts, this study introduces a methodology for Structural-borne Road Noise (SRN) prediction and optimization. This approach relies on a multi-level target decomposition and a hybrid model combining Convolutional Neural Network (CNN) and Support Vector Regression (SVR). Initially, a multi-level target analysis method is proposed, grounded in the hierarchical decomposition of vehicle road noise along the chassis parts, delineated layer by layer, in accordance with the vibration transmission path. Subsequently, the CNN–SVR hybrid model, predicated on the multi-level target framework, is proposed. Notably, the hybrid model exhibits a superior predictive accuracy exceeding 0.97, surpassing both traditional CNN and SVR models. Finally, the method and model are deployed for sensitivity analysis of chassis parameters in relation to road noise, as well as for the prediction and optimization analysis of SRN in vehicles. The outcomes underscore the high sensitivity of parameters such as the dynamic stiffness of the rear axle bushing and the large front swing arm bushing influencing SRN. The optimization results, facilitated by the CNN–SVR hybrid model, align closely with the measured outcomes, displaying a negligible relative error of 0.82%. Furthermore, the measured results indicate a noteworthy enhancement of 4.07% in the driver’s right-ear Sound Pressure Level (SPL) following the proposed improvements compared to the original state. Full article

Geosynthetic engineering has made significant advances during the past decade in the areas of manufacturing and practical applications. As a result, geosynthetics have become essential materials that facilitate construction, better improve short- and long-term performance, and reduce long-term maintenance costs in routine civil engineering projects. Geosynthetics are also being recognized as fundamental to sustainable infrastructure development as they reduce the carbon footprint generated by infrastructure development by minimizing the use of natural construction materials. Creative use of geosynthetics in geo-engineering practices is expected to continue to expand as innovative materials and products are becoming available. In this paper, we begin by discussing issues related to climate change. The sustainable benefits of geosynthetics are then presented by demonstrating the potential of geosynthetics to significantly reduce carbon footprints compared to traditional solutions. Finally, recent geosynthetic technologies have been introduced for use in transportation infrastructure. The pathway forward of the geosynthetic technology is also discussed from the view of sustainable infrastructure development. Full article

Rail corrugation is a degradation phenomenon that manifests as a quasi-periodic irregularity on the running surface of the rail. It is a critical problem for urban railway lines because it induces ground-borne vibrations transmitted to the buildings near the infrastructure, causing complaints from the inhabitants. A typical treatment to mitigate the rail corrugation problem is the periodic grinding of the rails, performed by dedicated vehicles. The scheduling of rail maintenance is particularly critical because it can be performed only when the service is interrupted. A procedure for the continuous monitoring of rail corrugation is proposed, based on axlebox acceleration measurements. The rail irregularity is estimated from the measured acceleration by means of a frequency domain model of vertical dynamics of the wheel–rail interaction. The results obtained by using two different methods (a state-of-the-art method and a new one) are compared. Finally, the study of the evolution of the power content of the rail irregularity enables the identification of the track sections where corrugation is developing and rail grinding is necessary. Full article