Search Results (119)

This article presents a comprehensive analysis of the primary electrical power distribution system in hybrid-electric aircraft, with particular emphasis on its environmental performance assessed through Life Cycle Assessment (LCA). High-resolution Life Cycle Inventory (LCI) data were developed in collaboration with industry partners and refined to reflect current production standards. The results indicate that printed circuit boards (PCBs), magnets, precious metals (gold and silver), and copper are the primary contributors to environmental impact, with PCBs alone accounting for over 50% of material-related emissions. Although precious metals constitute only 0.014% of the product’s mass, they account for nearly 9% of total emissions due to the energy-intensive nature of their mining and refining processes. Additionally, manufacturing stages involving thermal treatments—such as surface coating of iron cores at 850 °C for 14 h—significantly increase energy consumption and associated emissions. The study concludes with recommendations for reducing the carbon footprint of future aircraft power systems through improved material efficiency, process optimization, and supply chain sustainability. Full article

The surface modification of medical implant materials stands as a favorable strategy to enhance their biological properties including their antibacterial effect and biocompatibility. Recently, both in vitro and in vivo studies have shown that film heterostructures based on a combination of noble metal sublayers and an active component, such as silver and gold nanoparticles, offer unique advantages. The present work develops this promising direction and focuses on a series of combinations of noble metal coatings functionalized with bimetallic nanoclusters obtained by vapor-phase deposition methods onto the surfaces of Ti-based implants. This investigation investigates the influence of sequential deposition (AgAu or AuAg) and noble metal component (Ir or Au) on the coating morphology and the active component chemical form and release. Thus, scanning electron microscopy, X-ray photoelectron spectroscopy, and inductively coupled plasma atomic emission spectroscopy have been applied to characterize the samples before and after in vivo biological studies (rat models, 1 and 3 months). Histological and blood analyses confirmed the high biocompatibility of all the heterostructures. The samples also showed a pronounced in vitro biocidal effect against Gram-positive (S. epidermalis) and Gram-negative (P. aeruginosa) bacteria that correlates with a dynamic of silver release. The AuAg/M heterostructures demonstrated superior biological characteristics compared to their AgAu/M counterparts, suggesting enhanced both long-term integration and antibacterial action. Full article

The integration of polymer coatings with metal and metal oxide nanoparticles represents a significant advancement in nanotechnology, enhancing the stability, biocompatibility, and functional versatility of these materials. These enhanced properties make polymer-coated nanoparticles key components in a wide range of applications, including biomedicine, catalysis, environmental remediation, electronics, and energy storage. The unique combination of polymeric materials with metal and metal oxide cores results in hybrid structures with superior performance characteristics, making them highly desirable for various technological innovations. Polymer-coated metal and metal oxide nanoparticles can be synthesized through various methods, such as grafting to, grafting from, grafting through, in situ techniques, and layer-by-layer assembly, each offering distinct control over nanoparticle size, shape, and surface functionality. The distinctive contribution of this review lies in its systematic comparison of polymer-coating synthesis approaches for different metal and metal oxide nanoparticles, revealing how variations in polymer architecture and surface chemistry govern their stability, functionality, and application performance. The aim of this paper is to provide a comprehensive overview of the current state of research on polymer-coated nanoparticles, including metals such as gold, silver, copper, platinum, and palladium, as well as metal oxides like iron oxide, titanium dioxide, zinc oxide, and aluminum oxide. This review highlights their design strategies, synthesis methods, characterization approaches, and diverse emerging applications, including biomedicine (e.g., targeted drug delivery, gene delivery, bone tissue regeneration, imaging, antimicrobials, and therapeutic interventions), environmental remediation (e.g., antibacterials and sensors), catalysis, electronics, and energy conversion. Full article

Cellulose nanocrystals (CNCs) have been extensively studied for their ability to maintain liquid crystal (LC) order within solid films, providing a robust template for the self-assembly of plasmonic nanorods (NRs) and the construction of nanostructures. The self-assembly mechanism of NRs combined with uniaxially nematic CNC LCs has long attracted considerable attention. In this study, we investigated the influence of pH and aspect ratio on the self-assembly of composite NR–uniaxial nematic CNC systems. The phase diagram indicates that the uniaxial nematic phase of CNCs becomes more stable at higher pH, while it is more sensitive to disturbance from NRs with smaller aspect ratios. Furthermore, a composite effective excluded volume model was developed, in which the interaction between NRs and CNCs is incorporated, and the effective excluded volume is governed by both the effective CNC diameter and the NR aspect ratio. This study elucidates the influence mechanism of pH and aspect ratio on the self-assembly of composite NR–uniaxial nematic CNC systems, in good agreement with experimental observations. Our results provide fundamental insights into the utilization of uniaxial nematic CNC LCs as templates for fabricating novel nanomaterials and nanostructures, and deepen understanding of the mechanisms governing such composites. Full article

We have studied the effect of BITh molecules on the work functions of Ag and Au, with and without quartz lamp illumination. Silver and gold films coated with BITh molecules were fabricated and studied in reflection and Kelvin Probe experiments. The deposition of BITh films on Ag and Au reduced their work functions (in agreement with our recent study, wherein a similar reduction was caused by the deposition of a PMMA polymer). Illumination of the BITh-coated samples with a quartz lamp caused reductions in work functions by several tens of meV, which (almost) returned to their original values when the light was turned off. The characteristic time of this process (~15 min) was much shorter than that of photopolymerization (~180 min), suggesting that these two phenomena are nearly independent of each other. The effects of the Au substrates were qualitatively similar to those of the Ag substrates. Our findings pave the way to fundamental studies and applications of light–matter interactions. Full article

Nanotopography refers to the intricate surface characteristics of materials at the sub-micron (<1000 nm) and nanometer (<100 nm) scales. These topographical surface features significantly influence the physical, chemical, and biological properties of biomaterials, affecting their interactions with cells and surrounding tissues. The development of nanostructured surfaces of polymeric nanocomposites has garnered increasing attention in the fields of tissue engineering and regenerative medicine due to their ability to modulate cellular responses and enhance tissue regeneration. Various top-down and bottom-up techniques, including nanolithography, etching, deposition, laser ablation, template-assisted synthesis, and nanografting techniques, are employed to create structured surfaces on biomaterials. Additionally, nanotopographies can be fabricated using polymeric nanocomposites, with or without the integration of organic and inorganic nanomaterials, through advanced methods such as using electrospinning, layer-by-layer (LbL) assembly, sol–gel processing, in situ polymerization, 3D printing, template-assisted methods, and spin coating. The surface topography of polymeric nanocomposite scaffolds can be tailored through the incorporation of organic nanomaterials (e.g., chitosan, dextran, alginate, collagen, polydopamine, cellulose, polypyrrole) and inorganic nanomaterials (e.g., silver, gold, titania, silica, zirconia, iron oxide). The choice of fabrication technique depends on the desired surface features, material properties, and specific biomedical applications. Nanotopographical modifications on biomaterials’ surface play a crucial role in regulating cell behavior, including adhesion, proliferation, differentiation, and migration, which are critical for tissue engineering and repair. For effective tissue regeneration, it is imperative that scaffolds closely mimic the native extracellular matrix (ECM), providing a mechanical framework and topographical cues that replicate matrix elasticity and nanoscale surface features. This ECM biomimicry is vital for responding to biochemical signaling cues, orchestrating cellular functions, metabolic processes, and subsequent tissue organization. The integration of nanotopography within scaffold matrices has emerged as a pivotal regulator in the development of next-generation biomaterials designed to regulate cellular responses for enhanced tissue repair and organization. Additionally, these scaffolds with specific surface topographies, such as grooves (linear channels that guide cell alignment), pillars (protrusions), holes/pits/dots (depressions), fibrous structures (mimicking ECM fibers), and tubular arrays (array of tubular structures), are crucial for regulating cell behavior and promoting tissue repair. This review presents recent advances in the fabrication methodologies used to engineer nanotopographical microenvironments in polymeric nanocomposite tissue scaffolds through the incorporation of nanomaterials and biomolecular functionalization. Furthermore, it discusses how these modifications influence cellular interactions and tissue regeneration. Finally, the review highlights the challenges and future perspectives in nanomaterial-mediated fabrication of nanotopographical polymeric scaffolds for tissue engineering and regenerative medicine. Full article

Bacterial infections are the primary cause of mastitis in dairy cattle. Fungal mastitis occurs in 1–12% of cases. Antibiotic therapy, the standard treatment for mastitis, has led to antibiotic-resistant bacteria, reducing treatment efficacy and increasing fungal mastitis occurrence. Antibiotics lack biocidal effects on fungi, which often exhibit resistance to antifungal agents. This study evaluated the antifungal properties of nanoparticles (NPs) against Candida albicans, Candida glabrata, Candida parapsilosis, Diutina rugosa var. rugosa, Diutina catenulata, and Diutina rugosa. Tested NPs included gold (AuNPs), silver (AgNPs), copper (CuNPs), iron with hydrophilic carbon coating (FeCNPs) (1.56–25 mg/L), and platinum (PtNPs) (0.625–10 mg/L), along with their complexes. Minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) at 0.75–25 mg/L for AuNPs, AgNPs, CuNPs, and FeCNPs and 0.313–10 mg/L for PtNPs, as well as fungal sensitivity to standard antifungals, were determined. Each strain showed different sensitivities depending on the NPs used and their concentrations. C. glabrata was the most resistant to nanoparticles, while D. catenulata was the most susceptible. PtNPs and FeCNPs showed no or weak biocidal properties. Some mycotic-resistant strains were sensitive to nanoparticles. This study indicates a high in vitro antifungal potential for the application of nanoparticles, especially AgCuNPs, as a new effective non-antibiotic agent for the prevention and control of mycotic mastitis in dairy cattle. Full article

This article outlines the method of creating electrodes for electrochemical sensors using hybrid nanostructures composed of graphene and conducting polymers with insertion of gold nanoparticles. The technology employed for graphene dispersion and support stabilization was based on the chemical vapor deposition technique followed by electrochemical delamination. The method used to obtain hybrid nanostructures from graphene and conductive polymers was drop-casting, utilizing solutions of P3HT, PANI-EB, and F8T2. Additionally, the insertion of gold nanoparticles utilized an innovative dip-coating technique, with the graphene-conducting polymer frameworks submerged in a HAuCl₄/2-propanol solution and subsequently subjected to controlled heating. The integration of gold nanoparticles differs notably, with P3HT showing the least adhesion of gold nanoparticles, while PANI-EB exhibits the highest. An inkjet printer was employed to create electrodes with metallization accomplished through the use of commercial silver ink. Notable variations in roughness (grain size) result in unique behaviors of these structures, and therefore, any potential differences in the sensitivity of the generated sensing structures can be more thoroughly understood through this spatial arrangement. The electrochemical experiments utilized a diluted sulfuric acid solution at three different scan rates. The oxidation and reduction potentials of the structures seem fairly alike. Nevertheless, a notable difference is seen in the anodic and cathodic current densities, which appear to be largely influenced by the active surface of gold nanoparticles linked to the polymeric grains. The graphene–PANI-EB structure with Au nanoparticles showed the highest responsiveness and will be further evaluated for biomedical applications. Full article

Multilayer samples are used in a wide range of sectors for their functionality. In the field of cultural heritage, multilayer samples are also common, as in the case of gilded or silvered alloys in the pigment layers in paintings. The X-ray ratios Lα/Lβ, Kα/Kβ, or K/L for an element or for different elements in a multilayer sample depend on the chemical composition and thickness of the superimposed layers and on the chemical composition and thickness of the layer in which the element is situated. Gold decorations of paintings on wood represent examples of multilayered structures and, for this reason, it is important to be able to determine the thickness of the gold layer. In the present paper, gold coatings of several paintings on gilded wood, by Italian artist Taddeo Gaddi (1300–1366 AD), were examined using portable energy-dispersive X-ray fluorescence (ED-XRF) in order to calculate the thickness of the gold layer on ochre by measuring the intensity ratio of the Au-L_α/Fe-K_α X-ray. The experimental results obtained showed that the gold leaves used by the artist have a thickness of approximately 0.3 to 0.4 µm; this also demonstrates the artist’s remarkable ability in creating the gilding. Full article

Graphene oxide (GO) has emerged as a carbon-based nanomaterial providing a different pathway to graphene. One of its most notable features is the ability to partially reduce it, resulting in graphene-like sheets through the elimination of oxygen-including functional groups. In this paper, the effect of localized interactions in an Ag/GO/Au multilayer system was studied to explore its potential for photonic applications. GO was dip-coated onto magnetron-sputtered silver, followed by the deposition of a thin gold film to form an Ag/GO/Au structure. Micro-Raman Spectroscopy, SEM and Variable Angle Ellipsometry (VASE) measurements were performed on the Ag/GO/Au structure. An interesting behavior of the GO deposited on magnetron-sputtered silver with the formation of Ag nanostructures on top of the GO layer is reported. In addition to typical GO bands, Micro-Raman analysis reveals peaks such as the 1478 cm⁻¹ band, indicating a transition from sp³ to sp² hybridization, confirming the partial reduction of GO. Additionally, calculations based on effective medium theory (EMT) highlight the potential of Ag/GO structures in hyperbolic metamaterials for photonics. The medium exhibits dielectric behavior up to 323 nm, transitions to type I HMM between 323 and 400 nm and undergoes an Epsilon Near Zero and Pole (ENZP) transition at 400 nm, followed by type II HMM behavior. Full article

This review explores the advances in developing adsorbent materials for solid-phase microextraction (SPME), focusing on nanoparticles, nanocomposites, and nanoporous structures. Nanoparticles, including those of metals (e.g., gold, silver), metal oxides (e.g., TiO₂, ZnO), and carbon-based materials (e.g., carbon nanotubes, graphene), offer enhanced surface area, improved extraction efficiency, and increased selectivity compared to traditional coatings. Nanocomposites, such as those combining metal oxides with polymers or carbon-based materials, exhibit synergistic properties, further improving extraction performance. Nanoporous materials, including metal–organic frameworks (MOFs) and ordered mesoporous carbons, provide high surface area and tunable pore structures, enabling selective adsorption of analytes. These advanced materials have been successfully applied to various analytes, including volatile organic compounds (VOCs), polycyclic aromatic hydrocarbons (PAHs), pesticides, and heavy metals, demonstrating improved sensitivity, selectivity, and reproducibility compared to conventional SPME fibers. The incorporation of nanomaterials has significantly expanded the scope and applicability of SPME, enabling the analysis of trace-level analytes in complex matrices. This review highlights the significant potential of nanomaterials in revolutionizing SPME technology, offering new possibilities for sensitive and selective analysis in environmental monitoring, food safety, and other critical applications. Full article

This study offers a comprehensive summary of the current states as well as potential future directions of transparent conducting oxides (TCOs), particularly tin-doped indium oxide (ITO), the most readily accessible TCO on the market. Solar cells, flat panel displays (FPDs), liquid crystal displays (LCDs), antireflection (AR) coatings for airbus windows, photovoltaic and optoelectronic devices, transparent p–n junction diodes, etc. are a few of the best uses for this material. Other conductive metals that show a lot of promise as substitutes for traditional conductive materials include copper, zinc oxide, aluminum, silver, gold, and tin. These metals are also utilized in AR coatings. The optimal deposition techniques for creating ITO films under the current conditions have been determined to be DC (direct current) and RF (radio frequency) MS (magnetron sputtering) deposition, both with and without the introduction of Ar gas. When producing most types of AR coatings, it is necessary to obtain thicknesses of at least 100 nm and minimum resistivities on the order of 10⁻⁴ Ω cm. For AR coatings, issues related to less-conductive materials than ITO have been considered. Full article

While microparticles can be removed by a filtration step at a drinking water treatment plant (DWTP), engineered nanoparticles (ENPs), which are widely used in industry, commerce and households, pose a major problem due to their special properties, e.g., size, reactivity and polarity. In addition, many ENPs exhibit toxic potential, which makes their presence in drinking water undesirable. Therefore, this study investigated the removal of ENPs in the laboratory and at a pilot-scale DWTP. Eight ENPs were synthesized and tested for stability in different types of water. Only three of them were stable in natural water: cetyltrimethylammonium bromide-coated gold (CTAB/AuNPs), polyvinylpyrrolidone-stabilized gold and silver nanoparticles (PVP/AuNPs, PVP/AgNPs). Their retention on quartz sand, silica gel and fresh anthracite was low, but CTAB/AuNPs could be retained on fresh river sand and thus should not overcome riverbank filtration, while PVP/AuNPs and PVP/AgNPs showed no retention and may be present in raw water. During ozonation, PVP/AuNPs remained stable while PVP/AgNPs were partially degraded. The advanced oxidation process (AOP) was less effective than ozone. PVP/AgNPs were almost completely retained on the pilot plant anthracite sand filter coated with manganese(IV) oxide and ferrihydrite from raw water treatment. PVP/AuNPs passed the filter with no retention. In contrast to PVP/AuNPs, PVP/AgNPs and CTAB/AuNPs were also retained on activated carbon. The integration of a flocculation step with iron(III) salts can improve ENP removal, with PVP/AuNPs requiring higher flocculant doses than PVP/AgNPs. PVP/AuNPs, in particular, are well-suited for testing the effectiveness of water treatment. Further data on the occurrence of stable ENPs in raw water and their behavior during water treatment are needed to perform a risk assessment and derive the measures. Full article

The immobilization of functional nano-blocks by means of electrostatic interactions is a promising technology for creating sensitive layers of (bio)chemical sensors. This is due to the unique ability of electrostatic interactions for directional immobilization and the uniform distribution of charged objects over the surface. This report discusses methods for introducing an electrostatically active buffer layer onto a gold surface and studies its interaction with nanoparticles carrying charges of different signs on their surface. To study the adsorption capacity of the gold surface modified with thiocyanate, silver nanoparticles of 60 nm in size, stabilized by positively charged at pH 5–6 polymer (Ag-NP&BPEI) and negatively charged coatings (Ag-NP&CIT, Ag-NP&PEG, and Ag-NP&PVP), were used as an electrostatic probe. The analysis of SPR and UV-VIS spectroscopy results, electrochemical measurements, and wide-field surface plasmon resonance microscopy imaging indicate that the gold surface modified with thiocyanate behaves as a negatively charged object in processes driven by electrostatic interactions. Full article

Convenient, rapid, highly sensitive and on-site iron determination is important for environmental safety and human health. We developed a sensing system for the detection of Fe(III) in water based on 7-mercapto-4-methylcoumarine (MMC)-stabilized silver-coated gold nanostars (GNS@Ag@MMC), exploiting a redox reaction between the Fe(III) cation and the silver shell of the nanoparticles, which causes a severe transformation of the nanomaterial structure, reverting it to pristine GNSs. This system works by simultaneously monitoring changes in the Localized Surface Plasmon Resonance (LSPR) and Surface-Enhanced Raman Spectroscopy (SERS) spectra as a function of added Fe(III). The proposed sensing system is able to detect the Fe(III) cation in the 1.0 × 10⁻⁵–1.5 × 10⁻⁴ M range, and its selectivity of the GNS@Ag@MMC sensor toward iron has been verified monitoring the LSPR and the SERS response to other cations with a clear selectivity toward Fe(III). Full article