Search Results (38)

The overuse of nonrenewable resources has motivated intensive research and the development of new types of green bio-based and degradable feedstocks derived from natural sources, such as cellulose derivates, also in nanoforms. The inclusion of such nanoparticles in bio-based polymers with the aim of providing reinforcement is a trend, which, when associated with the incorporation active compounds, creates active packaging suitable for the packaging of highly perishable food, thus contributing to the product’s shelf-life extension. Chitosan (Ch)/sage essential oil (SEO) bionanocomposite reinforced with nanocrystalline cellulose (CNC) was cast as active packaging for the preservation of fresh poultry meat. Meat samples were wrapped in different bioplastics (pristine chitosan, chitosan with commercial CNC, chitosan with CNC obtained from three different lignocellulosic crops, giant reed (G), kenaf (K), and miscanthus (M), chitosan with SEO, and chitosan with SEO and CNC), while unwrapped samples were tested as the control. Periodically, samples were evaluated in terms of their physicochemical properties and microbial growth. Additionally, bionanocomposites were also evaluated in terms of their in situ antimicrobial properties, as well as migration toward food simulants. Meat samples protected with bionanocomposites showed lower levels of microbiological growth (2–3 logs lower than control) and lipid oxidation (20–30% lower than in control), over time. This was attributed to the intrinsic antimicrobial capacity of chitosan and the high oxygen barrier properties of the films resulting from the CNC inclusion. The SEO incorporation did not significantly improve the material’s antimicrobial and antioxidant activity yet interfered directly with the meat’s color as it migrated to its surface. In the in vitro assays, all bionanocomposites demonstrated good antimicrobial activity against B. cereus (reduction of ~8.2 log) and Salmonella Choleraesuis (reduction of ~5–6 log). Through the in vitro migration assay, it was verified that the SEO release rate of phenolic compounds to ethanol 50% (dairy products simulate) was higher than to ethanol 95% (fatty food simulate). Furthermore, these migration tests proved that nanocellulose was capable of delaying SEO migration, thus reducing the negative effect on the meat’s color and the pro-oxidant activity recorded in TBARS. It was concluded that the tested chitosan/nanocellulose bionanocomposites increased the shelf life of fresh poultry meat. Full article

Water pollution caused by landfill leachate, which contains high concentrations of heavy metals and organic contaminants, poses a serious environmental threat. Among the potential remediation strategies, phytoremediation using Miscanthus x giganteus (giant miscanthus) has gained attention due to its strong resistance to harsh conditions and its capacity to accumulate heavy metals. This study evaluates the effectiveness of Miscanthus x giganteus in treating landfill leachate, with a focus on removing key pollutants such as zinc (Zn), nickel (Ni), and copper (Cu) by simulating wetland conditions. A pilot-scale experiment conducted at the Grebača landfill site assessed the plant’s ability to enhance metal bioavailability, stabilize contaminants, and limit their mobility within the leachate system. The results demonstrated that Miscanthus x giganteus effectively mobilized Zn and Ni through rhizospheric activity, whereas Cu remained largely immobile, indicating potential for phytostabilization. Sequential extraction analysis further confirmed that the plant significantly reduced the mobile fractions of Zn and Ni in the soil, highlighting its dual role in both phytoremediation and phytostabilization. These findings suggest that Miscanthus x giganteus offers a sustainable and cost-effective approach to landfill leachate treatment, serving as a viable alternative to conventional methods. By integrating this nature-based solution into industrial and municipal waste management, it promotes environmental sustainability while enhancing remediation efficiency. Full article

With rising demand for wood products and reduced wood harvesting due to the European Green Deal, alternative lignocellulosic materials for insulation are necessary. In this work, we manufactured reference particleboard from industrial particles and fifteen different board variants from alternative lignocellulosic plants material, i.e., five types of perennial plant biomass in three substitutions: 30, 50 and 75% of their share in the board with a nominal density of 250 kg/m³. Within the analysis of manufactured boards, the mechanical, chemical and thermal properties were investigated—internal bond, formaldehyde emissions, thermal insulation, heat transfer coefficient and thermal conductivity. In the case of thermal conductivity, the most promising results from a practical point of view (W/mK < 0.07) were obtained with Sida hermaphrodita and Miscanthus, achieving the best results at 50% substitution. The lowest formaldehyde emissions were recorded for boards with Panicum virgatum and Miscanthus, highlighting their positive environmental performance. In terms of mechanical properties, the highest internal bond was noticed in particleboards with a 30% substitution of Spartina pectinata and Miscanthus. Research findings confirm the potential of perennial plants as a sustainable source of raw materials for insulation panel manufacturing. Despite needing improvements in mechanical properties, most notably internal bond strength, these plants offer an ecologically responsible solution aligned with global construction trends, thus lessening reliance on traditional wood products. Thus, long-term benefits may be realized through the strategic combination of diverse raw materials within a single particleboard. Full article

Biomass can be used for electricity generation, especially in developing countries, but also in developed ones, where the utilization of renewable energy sources is being integrated into a sustainable economy. There are considerable differences in the scale of biomass use and in the technology of its processing. One of the most important sources of biofuel is the biomass of grass. This research aimed to determine the long-term effects of organic fertilizers on cellulose, hemicellulose, and lignin content in the biomass of three grass species: giant miscanthus (Miscanthus × giganteus), prairie cordgrass (Spartina pectinata), and switchgrass (Panicum virgatum L.) in the first three years of growth. The experiment was established in four replications on microplots of 2 m² in April 2018. Before planting grass rhizomes, municipal sewage sludge (SS) and spent mushroom substrate (SMS) were introduced into the soil in various combinations. Biomass is harvested in December every year. The content of structural polysaccharides in the grass species statistically significantly varied in response to organic waste. Compared to other fertilizer combinations, SS application increased the content of cellulose in the biomass of Miscanthus giganteus (43.66% of DM) and Spartina pectinata (37.69% of DM) and hemicellulose in Spartina pectinata (27.80% of DM) and Panicum virgatum (23.64% of DM). Of the three species of grass, the chemical composition of Miscanthus giganteus cell walls was the most favorable for biofuel production, with the most cellulose and hemicellulose and the least lignin compared to other grass species. The content of lignin in the biomass of Miscanthus × giganteus and Spartina pectinata was the greatest on the plot with SMS and amounted to 7.79% of DM and 12.32% of DM, respectively. In the case of Panicum virgatum, the average content of lignin was similar across all fertilized plots, with 15.42% DM. Full article

The dwindling availability of agricultural land, caused by factors such as rapid population growth, urban expansion, and soil contamination, has significantly increased the pressure on food production. To address this challenge, cultivating non-food crops on contaminated land has emerged as a promising solution. This approach not only frees up fertile soil for food production but also mitigates human exposure to contaminants. This work aimed to examine the impact of soil contamination with Cd, Pb, Ni, and Zn on the growth, productivity, metal accumulation, and the tolerance of five lignocellulosic non-food crops: switchgrass (Panicum virgatum L.), biomass sorghum (Sorghum bicolor L. Moench), giant reed (Arundo donax L.), African fodder cane (Saccharum spontaneum L. spp. aegyptiacum Willd. Hackel), and miscanthus (Miscanthus × giganteus Greef et Deu.). A two-year pot experiment was conducted in Greece, Italy, and Portugal, following the same protocols and applying various levels of metals: Cd (0, 4, 8 mg kg⁻¹), Pb and Zn (0, 450, 900 mg kg⁻¹), and Ni (0, 110, 220 mg kg⁻¹). The experimental design was completely randomized, with three replicates for each treatment. The results showed that switchgrass and sorghum generally maintained their height and productivity under Cd and Pb stress but were adversely affected by high Zn and Ni concentrations. Giant reed and African fodder cane showed reduced height and productivity at higher Ni and Zn levels. Miscanthus exhibited resilience in height but experienced productivity reductions only at the highest Zn concentration. Heavy metal uptake varied among crops, with switchgrass and sorghum showing high Cd and Pb uptake, while giant reed accumulated the most Cd and Zn. Miscanthus had the highest Ni accumulation. The tolerance indices indicated that switchgrass and sorghum were more tolerant to Cd and Zn at lower concentrations, whereas miscanthus had lower tolerance to Cd but a higher tolerance to Zn at higher concentrations. Giant reed and African fodder cane demonstrated stable tolerance across most heavy metals. Accumulation indices highlighted the effectiveness of switchgrass and sorghum in Cd and Pb uptake, while miscanthus excelled in Ni and Zn accumulation. The cluster analysis revealed similar responses to heavy metal stress between African fodder cane and giant reed, as well as between sorghum and miscanthus, with switchgrass displaying distinct behavior. Overall, the study highlights the differential tolerance and accumulation capacities of these crops, indicating the potential for phytoremediation applications and biomass production in heavy metal-contaminated soils. Full article

Despite its significant thermal requirements, melon is a vegetable species that holds the potential for expanding the crop range in temperate climate regions. The selection of appropriate varieties and agronomic practices facilitates its cultivation in these regions. This experiment, employing a randomized block design, was conducted from 2019 to 2021, and this study evaluated the response of three melon varieties—‘Seledyn F1’, ‘Melba’, and ‘Malaga F1’ (factor I)—to various mulching materials (factor II): black polyethylene film (PE), black polypropylene nonwoven (PP), biodegradable film (Fbio), and giant miscanthus straw. Control plots were left unmulched. Melon seeds were sown on 15 April, and seedlings were transplanted on 31 May at a spacing of 100 × 80 cm. This study assessed yield, fruit number, individual fruit weight, and vertical and horizontal fruit diameters. Under optimal conditions, the varieties Seledyn F1 and Malaga F1 produced fruits with the highest individual mass. The application of synthetic mulches led to a two-fold increase in fruit yield compared to unmulched plots, with a 23.7% increase in fruit number. On average, the largest fruits were obtained with PE mulch. Melons grown on Fbio mulch yielded, on average, 40% less and produced 18.8% fewer fruits compared to those grown with PE mulch. Full article

This study presents the efficiency of TSS and organic pollutants (BOD₅ and COD) removal in a hybrid constructed wetland wastewater treatment plant (VF-HF type) with an aeration system. This study was conducted over 6 years (2017–2022) in a facility with a capacity of 4.5 m³/day located in southeastern Poland and designed to treat real domestic wastewater from a school building. The studied facility consists of a three-chambered septic tank, a pumping station with an aeration system, and two beds with vertical and horizontal flow planted with giant miscanthus and willow. As a result of artificial aeration, the dissolved oxygen concentration in wastewater after mechanical treatment increased significantly, by an average of 1.18 mg O₂/L, and was negatively correlated with wastewater temperature. The cumulative pollutant removal effects of the treatment plant (primary settling tank + VFCW + HFCW) were 81% for TSS, 98% for BOD₅, and 89% for COD. There was no statistically significant effect of aeration on the organic pollutant removal effects in the VF bed, and such an effect was found for the temperature of wastewater entering the VF bed. The TSS, BOD₅, and COD removal effects in the VF bed and BOD₅ in the VF-HF system were positively correlated with air temperature. The technological reliability of the treatment plant was 98% for TSS and 100% for BOD₅ and COD. The use of artificial aeration of wastewater makes it possible to achieve high organic pollutant removal efficiency in SSF CWs and to compensate for limitations due to the reduction in the area of constructed wetland beds. Full article

This study characterizes and compares the physicochemical parameters of three types of biomass: giant miscanthus, wheat straw, and white willow. An analysis of the chlorine content in the biomass was determined using a 5E-FL2350 fluorine and chlorine analyzer. In addition, energy parameters characterizing the biomass were determined, such as the content of ash and volatile matter in the tested materials, using the LECO TGA 701 thermogravimetric analyzer. The carbon and hydrogen contents were tested using the LECO TruSpec CHN elementary organic analyzer. The calorific value was determined using the LECO AC 500 isoperibolic calorimeter. Based on the research results, it was concluded that the use of the biomass torrefaction process improves its energy parameters. In the long term, this will affect the maintenance of the technical and operational efficiency of devices, installations, and power boilers compared to the co-combustion of fresh biomass. The greatest differences in results were recorded in the case of chlorine content. Carrying out detailed tests on the material immediately after its harvest showed that the content of this element was about 70% higher than in the case of torrefied raw material. The presence of chlorine in alternative fuels is responsible for the formation of chloride corrosion. Its content can be up to five times higher compared to conventional energy sources. The degree of risk of chloride corrosion of the selected elements of devices and installations is assessed on the basis of the so-called “chlorine corrosion index”. Full article

The aim of the present work was to assess the leaf area duration (LAD) and the radiation use efficiency (RUE) of six warm-season perennial biomass grasses (PBGs) in a two-year field trial in the semiarid Mediterranean climate under different soil water availability. Two ecotypes of giant reed (Arundo donax L., ARCT and ARMO), one ecotype of African fodder cane (Saccharum spontaneum L. subsp. aegyptiacum (Willd.) Hack., SAC) and three hybrids of Miscanthus (the commercial M. × giganteus J.M. Greef, Deuter ex Hodk., Renvoize, M × G, and two new seed-based hybrids, GNT9 and GNT10) were compared under three levels of soil water availability: rainfed, 50% and 100% of maximum crop evapotranspiration (ETm) restoration. The determination of RUE of perennial plants is controversial and has led to contrasting results in past studies. In the present work, LAD and RUE differed among crops and irrigation regimes, being positively affected by supplemental water inputs. SAC, ARCT and ARMO showed both high LAD and RUE, which determined the high biomass yield than both the commercial M × G and the improved Miscanthus hybrids GNT9 and GNT10. RUE was particularly high and less affected by soil water availability during the mid-season, while the effect of irrigation and the differences among the genotypes were larger during the late season. Adequate biomass yield can be achieved by sub-optimal soil water availability, thus reducing the water footprint and increasing the sustainability of these biomass perennial grasses selected for the Mediterranean climate. Full article

Fossil fuels are associated with problems such as resource depletion and pollution, necessitating the exploration of alternatives. Giant miscanthus (Miscanthus × giganteus Greef et Deu), a perennial that can be harvested yearly, requires a low production energy input. It has less ash content and high heat efficiency and has attracted attention as an energy source. An on-site processing equipment, powered via a tractor and equipped with a chipper and a two-stage compression roller, was developed that can harvest 1000 kg of giant miscanthus per hour and simultaneously produce compressed pellets eliminating unnecessary processes such as transportation and processing. With its use, 33–74.5 kWh/t of electrical energy can be saved by producing pellets. The changes in moisture content between the produced compressed pellets and two samples of the ground product were measured immediately before compression for 24 h at relative humidity ranging from 65% to 80%. The moisture content was 6% initially; it ranged from 6.71% to 7.81% in compressed pellets, depending on the conditions, and from 7.44% to 9.82% in the ground sample immediately before compression, indicating the effect of the physical form of the biomass and humidity in the environment. The possible storage period (while maintaining the moisture content at 8–10% for optimal biofuel efficiency based on the measured data) was predicted. The optimal relative humidity of the storage environment for maintaining biomass quality for more than 6 months was predicted to be ≤77% and ≤70% for the compressed pellet and ground sample, respectively. Moreover, at a relative humidity ≥77%, giant miscanthus biomass, immediately before compression, had >10% moisture content in 2 days, warranting caution in storage. Full article

Future European strategies to reduce dependence on foreign markets for energy supply and energy production will rely on the further exploitation of the primary sector. Lignocellulosic feedstock for bioenergy production is a valuable candidate, and dedicated crops such as giant reed (Arundo donax L.), miscanthus (Miscanthus × giganteus), reed canary grass (Phalaris arundinacea L.), and switchgrass (Panicum virgatum L.) have been proven to be suitable for extensive cultivation on marginal lands. The present review aimed at providing a comprehensive picture of the mechanical strategies available for harvesting giant reed, miscanthus, reed canary grass, and switchgrass that are suitable for the possible upscaling of their supply chain. Since harvesting is the most impactful phase of a lignocellulosic supply chain in dedicated crops, the associated performance and costs were taken into account in order to provide concrete observations and suggestions for future implementation. The findings of the present review highlighted that the investigated species have a sufficient technology readiness level concerning mechanical harvesting for the upscaling of their cultivation. All the species could indeed be harvested with existing machinery, mostly derived from the context of haymaking, without compromising the work productivity. Full article

The cultivation of perennial biomass crops (PBCs) on marginal lands is necessary to provide feedstock for the bio-based EU economy and accrue environmental benefits through carbon (C) sequestration in soil. Short rotation coppice (SRC) species, e.g., willow, black locust, and poplar, and perennial rhizomatous grasses, e.g., miscanthus, switchgrass, and giant reed, have been tested in many EU projects in the last 10 years to investigate their productive potential and contribution to the mitigation of climate change. A major knowledge gap regarding PBCs is the fate of accumulated soil organic carbon (SOC), once PBC plantations are reverted to arable crops. In this study, the effects of PBCs reversion on SOC and carbon-dioxide emission (CO₂) were monitored over a 2-year period in a long-term (11-year) multispecies trial of six PBCs: Three SRC species including poplar (Populus spp.), willow (Salix spp.), and black locust (Robinia pseudoacacia), and three herbaceous rhizomatous grasses including miscanthus (Miscanthus x giganteus), switchgrass (Panicum virgatum), and giant reed (Arundo donax). The SOC change and GHG emissions were then modeled with the ECOSSE model. Two years after the reversion, SOC increased significantly for all PBCs with no significant difference between them. During the PBC cultivation phase, 5.35 Mg SOC ha⁻¹ was sequestered while 10.95 Mg SOC ha⁻¹ was added by reversion, which indicated that 67% of SOC sequestration occurred after the reversion. The ECOSSE model was successfully used to simulate SOC sequestration trajectories (R² = 0.77) and CO₂ emission from soil (R² = 0.82) after the reversion of the six PBCs. This indicated that the high SOC sequestration rate after the reversion was due to humification of belowground biomass (roots + rhizomes/stumps), which had been mulched and incorporated into the reversion layer (0–30 cm). This occurred in the first 2 months (on average 5.47 Mg SOC ha⁻¹ y⁻¹) and in the first year after the reversion (1.3–1.8 Mg SOC ha⁻¹ y⁻¹). Considering the entire PBCs cultivation cycle (13 years of PBCs + reversion), PBCs showed annual SOC sequestration rates higher than 1 Mg SOC ha⁻¹ y⁻¹, placing PBCs cultivation and reversion as one of the most promising agricultural practices to combine biomass production, with the recovery of marginal lands to agricultural production through increasing the SOC. Full article

The Nature Reserve Malpaga-Basella, located along the Serio River in Lombardy, was recently established in 2017. It is interesting as it presents plant species typical in dry grassland habitats, not present in the surrounding area. In this study, Heteroptera were surveyed in the Nature Reserve and in a bordering giant Miscanthus crop in 2019. The biodiversity of the reserve was well characterized by the presence of species linked to arid environments with steppe or Mediterranean characteristics, like Antheminia lunulata. Four species new for Lombardy were collected, Lygus italicus, Drymus pilipes, Ortholomus punctipennis, and Arenocoris waltlii. Giant Miscanthus hosted only a few ubiquitous species, also collected in the Nature Reserve. Full article

The development of a sustainable bioenergy market is currently largely fueled by energy crops, whose ever-increasing production competes with the global food and feed supply. Consequently, non-food crops need to be considered as alternatives for energy biomass production. Such alternatives include microalgal biomass, as well as energy crops grown on non-agricultural land. The aim of the present study was to evaluate how co-digestion of microalgal biomass with giant miscanthus silage affects feedstock properties, the biogas production process, biogas yields, methane fractions and the digestate profile. Combining giant miscanthus silage with microbial biomass was found to produce better C/N ratios than using either substrate alone. The highest biogas and methane production rates—628.00 ± 20.05 cm³/gVS and 3045.56 ± 274.06 cm³ CH₄/d—were obtained with 40% microalgae in the feedstock. In all variants, the bulk of the microbial community consisted of bacteria (EUB338) and archaea (ARC915). Full article

The giant miscanthus (Miscanthus × giganteus) is one of the most essential energy plants. It also finds various alternative uses, including installing belts to prevent soil erosion. Biomass from such belts should be removed and rationally managed every year. The parameters of miscanthus biomass were investigated in terms of its suitability for combustion and anaerobic fermentation. Under the conditions of the experiment, miscanthus achieved a stable yield already in the second year of vegetation, mainly due to the high planting density. Energy parameters turned out to be typical for straw biomass (calorific value 18.06 MJ/kg). Relatively low ash melting temperatures (<1400 °C) and their chemical composition meant a high risk of contamination depositing on heating devices, which is often indicated as a shortcoming of biomass compared to hard coal. Miscanthus silage can be a valuable substrate for anaerobic digestion, but it requires a sufficiently early harvest, which affects the yield of biomass. The yield of energy in biomass obtained after drying plants was 163,623.6 MJ/ha. In contrast, the yield of energy from biomass collected in summer and processed into biomethane was much lower and amounted to 72,978.2 MJ/ha. Full article