Search Results (33)

This paper presents the design and implementation of a SLAM-based online mapping and autonomous trajectory execution system for the Nimbulus-e, a concept vehicle designed for agile maneuvering in confined spaces. The Nimbulus-e uses individual steer-by-wire corner modules with in-wheel motors at all four corners. The associated eight joint variables serve as control inputs, allowing precise trajectory following. These control inputs can be derived from the vehicle’s trajectory using nonholonomic constraints. A LiDAR sensor is used to map the environment and detect obstacles. The system processes LiDAR data in real time, continuously updating the environment map and enabling localization within the environment. The inclusion of vehicle odometry data significantly reduces computation time and improves accuracy compared to a purely visual approach. The A* and Hybrid A* algorithms are used for trajectory planning and optimization, ensuring smooth vehicle movement. The implementation is validated through both full vehicle simulations using an ADAMS Car—MATLABco-simulation and a scaled physical prototype, demonstrating the effectiveness of the system in navigating complex environments. This work contributes to the field of autonomous systems by demonstrating the potential of combining advanced sensor technologies with innovative control algorithms to achieve reliable and efficient navigation. Future developments will focus on improving the robustness of the system by implementing a robust closed-loop controller and exploring additional applications in dense urban traffic and agricultural operations. Full article

To address the challenge of fault diagnosis for in-wheel motors in four-wheel independent driving systems under variable driving conditions and harsh environments, this paper proposes a novel method based on two-stream 2DCNNs (two-dimensional convolutional neural networks) with a DCBA (depthwise convolution block attention) module. The main contributions are twofold: (1) A DCBA module is introduced to extract multi-scale features—including prominent, local, and average information—from grayscale images reconstructed from vibration signals across different domains; and (2) a two-stream network architecture is designed to learn complementary feature representations from time-domain and time–frequency-domain signals, which are fused through fully connected layers to improve diagnostic accuracy. Experimental results demonstrate that the proposed method achieves high recognition accuracy under various working speeds, loads, and road surfaces. Comparative studies with SENet, ECANet, CBAM, and single-stream 2DCNN models confirm its superior performance and robustness. The integration of DCBA with dual-domain feature learning effectively enhances fault feature extraction under complex operating conditions. Full article

This study evaluates the safety aspects of a prototype electric vehicle designed to enable wheelchair users to independently perform simple farm tasks in rural settings, like sample collection and crop monitoring. The vehicle, built at CREA, features four in-wheel electric motors, a pneumatic suspension system, and a secure wheelchair anchoring system. Tests at the CREA experimental farm assessed the vehicle’s whole-body vibrations on different surfaces (asphalt, headland, dirt road) using two tyre models and multiple speeds. A triaxial accelerometer on the wheelchair seat measured vibrations, which were analysed in accordance with ISO standards. Frequency analysis revealed significant vibrations in the 2–40 Hz range, with the Z-axis consistently showing the highest accelerations, which increased with the speed. Tyre A generally induced higher vibrations than Tyre B, likely due to the tread design. At high speeds, the effective accelerations exceeded safety thresholds on asphalt and headland. Statistical analysis confirmed speed as the dominant factor, with the surface type also playing a key role—headland generated the highest vibrations, followed by dirt road and asphalt. The results of these first tests highlighted the high potential of the vehicle to improve the agricultural mobility of disabled people, granting safety conditions and low vibration levels on all terrains at speeds up to 10 km h⁻¹. At higher speeds, however, the vibration levels may exceed the exposure limits, depending on the irregularities of the terrain and the tyre model. Overcoming these limitations is achievable through the optimization of the suspensions and tyres and will be the subject of the next step of this study. This technology could also support wheelchair users in construction, natural parks, and urban mobility. Full article

A fault-tolerant collaborative control strategy for four-wheel-drive electric vehicles is proposed to address hidden safety issues caused by one or more in-wheel motor faults; the basic design scheme is that the control system is divided into two layers of motion tracking and torque distribution, and three systems, including driving, braking, and front-wheel steering are controlled collaboratively for four-wheel torque distribution. In the layer of motion tracking, a vehicle model with two-degree-of-freedom is employed to predict the control reference values of the longitudinal force and additional yaw moment required; four types of sensors, such as wheel speed, acceleration, gyroscope, and steering wheel angle, are used to calculate the actual values. At the torque distribution layer, SSOD and MSCD distribution schemes are designed to cope with two operating conditions, namely sufficient and insufficient output capacity after local hub motor failure, respectively, focusing on the objective function, constraints, and control variables of the MSCD control strategy. Finally, two operating environments, a straight-line track, and a DLC track, are set up to verify the effectiveness of the proposed control method. The results indicate that, compared with traditional methods, the average errors of the center of mass sideslip angle and yaw rate are reduced by at least 12.9% and 5.88%, respectively, in the straight-line track environment. In the DLC track environment, the average errors of the center of mass sideslip angle and yaw rate are reduced by at least 6% and 4.5%, respectively. The proposed fault-tolerant controller ensures that the four-wheel-drive electric vehicle meets the requirements of handling stability and safety under one or more hub motor failure conditions. Full article

To optimize the acceleration performance of independently driven electric vehicles with four in-wheel motors, this paper proposes an anti-slip regulation (ASR) strategy based on dynamic road surface observer for more efficient tracking of the optimal slip ratio and enhanced vehicle acceleration. The method uses the Unscented Kalman Filter (UKF) observer to estimate vehicle speed and calculate the actual slip ratio, while a fuzzy controller based on the Burckhardt tire model identifies road surfaces. The road’s peak adhesion coefficient and optimal slip ratio curve are fitted using a Back Propagation Neural Network (BPNN) optimized by Particle Swarm Optimization (PSO). The control strategy further refines torque management through an adaptive sliding mode control (ASMC) that integrates adaptive laws and a super-twisting sliding mode approach to track the optimal slip ratio. Joint simulations with MATLAB/Simulink and Carsim on low-adhesion, joint, and split road surfaces demonstrate that the strategy quickly and accurately identifies the optimal slip ratio across various road surfaces. This enables the tire slip ratio to approach the optimal value in minimal time, significantly improving vehicle dynamic performance. Compared to conventional sliding mode controllers, the optimized ASMC reduces chattering and improves control precision. Full article

A hub motor is integrated into an electric wheel. The external excitation is complex and the heat dissipation conditions are poor. The working temperature of the hub motor easily becomes too high, resulting in large fluctuations in the output torque, which affect its service life. Taking a four-wheel hub-driven electric vehicle as the research object and aiming to resolve the issue of inaccurate prediction of the output torque of the hub motor in the real operating environment of the vehicle, a method for analyzing the temperature rise and torque characteristics of the hub motor considering multisource excitation and magnetic–thermal bidirectional coupling is proposed. First, the multisource excitation transmission path of the hub motor and the coupling principle of the road-electric wheel-vehicle body suspension system are analyzed from three aspects: the electromagnetic effect of the hub motor itself, the tire-ground effect, and the interaction between suspension (body) and electric wheel. We concluded that the load torque and air gap change in the motor are the key factors of its torque characteristics. On this basis, a dynamic model of the road-electric wheel-suspension-vehicle body system, an electromagnetic field model of the hub motor, and a temperature field model are established, and the influence of load torque and air gap change on the loss of in-wheel motor under multisource excitation is analyzed. Furthermore, based on the magnetic–thermal bidirectional coupling method, the motor loss under the combined action of load torque and air gap change is introduced into the temperature field model, and combined with the electromagnetic field model of the hub motor, the temperature distribution law and torque characteristics of the hub motor are accurately predicted. Finally, the accuracy and effectiveness of the calculation results of the temperature and torque characteristics of the hub motor are verified via an electric wheel bench test. Full article

Intelligentization is the development trend of the future automobile industry. Intelligentization requires that the dynamic control of the vehicle can complete the trajectory tracking according to the trajectory output of the decision planning the driving state of the vehicle and ensure the driving safety and stability of the vehicle. However, trajectory limit planning and harsh road conditions caused by emergencies will increase the difficulty of trajectory tracking and stability control of unmanned vehicles. In view of the above problems, this paper studies the trajectory tracking and stability control of distributed drive unmanned vehicles. This paper applies a hierarchical control framework. Firstly, in the upper controller, an adaptive prediction time linear quadratic regulator (APT LQR) path following algorithm is proposed to acquire the desired front-wheel-steering angle considering the dynamic stability performance of the tires. The lateral stability of the DDAUV is determined based on the phase plane, and the sliding surface, in the improved sliding mode control (SMC), is further dynamically adjusted to obtain the desired additional yaw moment for coordinating the path following and lateral stability. Then, in the lower controller, considering the slip and the working load of four tires, a comprehensive cost function is established to reasonably distribute the driving torque of four in-wheel motors (IWMs) for producing the desired additional yaw moment. Finally, the proposed control algorithm is verified by the hardware-in-the-loop (HIL) experiment platform. The results show the path following and lateral stability can be coordinated effectively under different driving conditions. Full article

In order to improve the driving performance of four-wheel drive electric vehicles and realize precise control of their speed, a Chaotic Random Grey Wolf Optimization-based PID in-wheel motor control algorithm is proposed in this paper. Based on an analysis of the structural principles of electric vehicles, mathematical and simulation models for the whole vehicle are established. In order to improve the control performance of the hub motor, the traditional Grey Wolf Optimization algorithm is improved. In particular, an enhanced population initialization strategy integrating sine and cosine random distribution factors into a Kent chaotic map is proposed, the weight factor of the algorithm is improved using a sine-based non-linear decreasing strategy, and the population position is improved using the random proportional movement strategy. These strategies effectively enhance the global optimization ability, convergence speed, and optimization accuracy of the traditional Grey Wolf Optimization algorithm. On this basis, the CR-GWO-PID control algorithm is established. Then, the software and hardware of an in-wheel motor controller are designed and an in-wheel motor bench test system is built. The simulation and bench test results demonstrate the significantly improved response speed and control accuracy of the proposed in-wheel motor control system. Full article

In today’s automotive industry, electrification is a major trend. In-wheel electric motors are among the most promising technologies yet to be fully developed. Indeed, the presence of multiple in-wheel motors acting as independent actuators allows for the implementation of innovative active systems and control strategies. This paper analyzes different design possibilities for a torque vectoring system applied to an originally compact front-wheel drive hybrid electric vehicle with one internal combustion engine for the front axle and two added electric motors integrated in the wheels of the rear axle. A 14 degrees of freedom vehicle model is present o accurately reproduce the nonlinearities of vehicle dynamic phenomena and exploited to obtain high-fidelity numerical simulation results. Different control methods are compared, a PID, an LQR, and four different sliding mode control strategies. All controllers achieve sufficiently good results in terms of lateral dynamics compared with the basic hybrid version. The various aspects and features of the different strategies are analyzed and discussed. Chattering reduction strategies are developed to improve the performance of sliding mode controllers. For a complete overview, control systems are compared using a performance factor that weighs control accuracy and effort in different driving maneuvers, i.e., ramp and step steering maneuvers performed under quite different conditions ranging up to the limits. Full article

This paper presents a novel motion control strategy based on model predictive control (MPC) for distributed drive electric vehicles (DDEVs), aiming to simultaneously control the longitudinal and lateral motion while considering efficiency and the driving feeling. Initially, we analyze the vehicle’s dynamic model, considering the vehicle body and in-wheel motors, to establish the foundation for model predictive control. Subsequently, we propose a model predictive direct motion control (MPDMC) approach that utilizes a single CPU to directly follow the driver’s commands by generating voltage references with a minimum cost function. The cost function of MPDMC is constructed, incorporating factors such as the longitudinal velocity, yaw rate, lateral displacement, and efficiency. We extensively analyze the weighting parameters of the cost function and introduce an optimization algorithm based on particle swarm optimization (PSO). This algorithm takes into account the aforementioned factors as well as the driving feeling, which is evaluated using a trained long short-term memory (LSTM) neural network. The LSTM network labels the response under different weighting parameters in various working conditions, i.e., “Nor”, “Eco”, and “Spt”. Finally, we evaluate the performance of the optimized MPDMC through simulations conducted using MATLAB and CarSim software. Four typical scenarios are considered, and the results demonstrate that the optimized MPDMC outperforms the baseline methods, achieving the best performance. Full article

High-speed and complex road conditions make it easy for vehicles to reach limit conditions, increasing the risk of instability. Consequently, there is an urgent need to solve the problem of vehicle stability and safety. In this paper, adaptive stability control is studied in BEVs driven by in-wheel motors. Based on the sliding model algorithm, a joint weighting control of the yaw rate and sideslip angle is carried out, and a weight coefficient is designed using a fuzzy algorithm to realize adaptive direct yaw moment control. Next, optimal torque distribution is designed with the minimum sum of four tire load rates as the optimization objective. Then, combined with the road adhesion coefficient and the maximum motor torque constraint, the torque distribution problem is transformed into a functionally optimal solution problem with constraints. The simulation results show that the direct yaw moment controller based on the adaptive sliding mode algorithm has a good control effect on the yaw rate and sideslip angle, and it can effectively improve vehicle adaptive stability control. In the optimal torque distributor based on road surface recognition, the estimated error of road adhesion is within 10%, and has a greater margin to deal with vehicle instability, which can effectively improve vehicle adaptive stability control. Full article

To effectively ensure the operational safety of an electric vehicle with in-wheel motor drive, a novel diagnosis method is proposed to monitor each in-wheel motor fault, the creativity of which lies in two aspects. One aspect is that affinity propagation (AP) is introduced into a minimum-distance discriminant projection (MDP) algorithm to propose a new dimension reduction algorithm, which is defined as APMDP. APMDP not only gathers the intra-class and inter-class information of high-dimensional data but also obtains information on the spatial structure. Another aspect is that multi-class support vector data description (SVDD) is improved using the Weibull kernel function, and its classification judgment rule is modified into a minimum distance from the intra-class cluster center. Finally, in-wheel motors with typical bearing faults are customized to collect vibration signals under four operating conditions, respectively, to verify the effectiveness of the proposed method. The results show that the APMDP’s performance is better than traditional dimension reduction methods, and the divisibility is improved by at least 8.35% over the LDA, MDP, and LPP. A multi-class SVDD classifier based on the Weibull kernel function has high classification accuracy and strong robustness, and the classification accuracies of the in-wheel motor faults in each condition are over 95%, which is higher than the polynomial and Gaussian kernel function. Full article

Aiming to improve the distance per charge of four in-wheel independent motor-drive electric vehicles in intelligent transportation systems, a hierarchical energy management strategy that weighs their computational efficiency and optimization performance is proposed. According to the information of an intelligent transportation system, a method combining reinforcement learning with receding horizon optimization is proposed at the upper level, which solves the cruising velocity for eco-driving in a long predictive horizon based on the online construction of a velocity planning problem. At the lower level, a multi-objective optimal torque allocation method that considers energy saving and safety is proposed, where an analytical solution based on the state feedback control was obtained with the vehicle following the optimal speed of the upper level and tracking the centerline of the target path. The energy management strategy proposed in this study effectively reduces the complexity of the intelligent energy-saving control system of the vehicle and achieves a fast solution to the whole vehicle energy optimization problem, integrating macro-traffic information while considering both power and safety. Finally, an intelligent, connected hardware-in-the-loop (HIL) simulation platform is built to verify the method formulated in this study. The simulation results demonstrate that the proposed method reduces energy consumption by 12.98% compared with the conventional constant-speed cruising strategy. In addition, the computational time is significantly reduced. Full article

The improvement of both the stability and economy of the four in-wheel motor drive (4IWMD) electric vehicle under complex drive cycles is currently a difficult problem in this field. A torque distribution method with the comprehensive goals of optimal torque distribution and energy efficiency, considering economy through energy efficiency for the 4IWMD electric vehicle, is proposed in this paper. Each component of the 4IWMD electric vehicle is modelled. The dynamic programming (DP) control algorithm is utilized for torque distribution between the front and rear in-wheel motors to obtain optimal torque distribution and energy efficiency in the 4IWMD electric vehicle. The simulation is performed on a co-simulation platform with the software of AVL Cruise and MATLAB/Simulink, considering a straight road. Compared to the fuzzy logic control algorithm, the simulation results are very promising, as the energy consumption of the electric vehicle was reduced by 22.68%, 20.73% and 21.84% under the WLTC, NEDC and customized IM240 driving cycle conditions, respectively, with the proposed DP control algorithm. The hardware-in-the loop (HIL) experimental results also indicate that the effectiveness of the proposed DP algorithm is verified under the NEDC, WLTC and IM240 driving cycles, when a straight road is considered. The proposed DP control algorithm not only reduces the vehicle energy consumption and guarantees the optimization of torque distribution, but also increases the driving range of the vehicle. Full article

As one of the key components, low-speed direct-drive in-wheel machines with high compact volume and high torque density are important for the traction system of electric vehicles (EVs). This paper introduces four different types of outer-rotor permanent magnet motors for EVs, including one five-phase SPM machine, one three-phase IPM machine with V-shaped PMs, one seven-phase axial flux machine (AFM) of sandwich structure and finally one hybrid flux (radial and axial) machine with a third rotor with V-shaped PMs added to the AFM. Firstly, the design criteria and basic operation principle are compared and discussed. Then, the key properties are analyzed using the Finite Element Method (FEM). The electromagnetic properties of the four fractional slot tooth concentrated winding in-wheel motors with similar dimensions are quantitatively compared, including air-gap flux density, electromotive force, field weakening capability, torque density, losses, and fault tolerant capability. The results show that the multi-phase motors have high torque density and high fault tolerance and are suitable for direct drive applications in EVs. Full article