Search Results (685)

The number of rubber plantations has increased significantly since 2000, especially in Southeast Asia and China, and their ecological impacts are becoming more evident. A robust rubber supply monitoring system is currently required at both the production and ecological levels. This study used Sentinel-2 multi-rule remote sensing images and a deep learning method to construct a deep learning model that could generate a distribution map of rubber plantations in Danzhou City, Hainan Province, from 2019 to 2024. For biomass modeling, 52 sample plots (27 of which were historical plots) were integrated, and the canopy structure was extracted as an auxiliary variable from the point cloud data generated by an unmanned aerial vehicle survey. Five algorithms, namely Random Forest (RF), Gradient Boosting Decision Tree, Convolutional Neural Network, Back Propagation Neural Network, and Extreme Gradient Boosting, were used to characterize the spatiotemporal changes in rubber plantation biomass and analyze the driving mechanisms. The developed deep learning model was exceptional at identifying rubber plantations (overall accuracy = 91.63%, Kappa = 0.83). The RF model performed the best in terms of biomass prediction (R² = 0.72, RRMSE = 21.48 Mg/ha). Research shows that canopy height as a characteristic factor enhances the explanatory power and stability of the biomass model. However, due to limitations such as sample plot size, image differences, canopy closure degree, and point cloud density, uncertainties in its generalization across years and regions remain. In summary, the proposed framework effectively captures the spatial and temporal dynamics of rubber plantations and estimates their biomass with high accuracy. This study provides a crucial reference for the refined management and ongoing monitoring of rubber plantations. Full article

Grain yield is one of the most critical indicators for evaluating the performance of wheat breeding. However, the assessment process, from early-stage breeding lines to officially registered varieties that have passed the DUS (Distinctness, Uniformity, and Stability) test, is often time-consuming and labor-intensive. Multispectral remote sensing based on unmanned aerial vehicles (UAVs) has demonstrated significant potential in crop phenotyping and yield estimation due to its high throughput, non-destructive nature, and ability to rapidly collect large-scale, multi-temporal data. In this study, multi-temporal UAV-based multispectral imagery, RGB images, and canopy height data were collected throughout the entire wheat growth stage (2023–2024) in Xuzhou, Jiangsu Province, China, to characterize the dynamic growth patterns of both breeding lines and registered cultivars. Vegetation indices (VIs), texture parameters (Tes), and a time-series crop height model (CHM), including the logistic-derived growth rate (GR) and the projected area (PA), were extracted to construct a comprehensive multi-source feature set. Four machine learning algorithms, namely a random forest (RF), support vector machine regression (SVR), extreme gradient boosting (XGBoost), and partial least squares regression (PLSR), were employed to model and estimate yield. The results demonstrated that spectral, texture, and canopy height features derived from multi-temporal UAV data effectively captured phenotypic differences among wheat types and contributed to yield estimation. Features obtained from later growth stages generally led to higher estimation accuracy. The integration of vegetation indices and texture features outperformed models using single-feature types. Furthermore, the integration of time-series features and feature selection further improved predictive accuracy, with XGBoost incorporating VIs, Tes, GR, and PA yielding the best performance (R² = 0.714, RMSE = 0.516 t/ha, rRMSE = 5.96%). Overall, the proposed multi-source modeling framework offers a practical and efficient solution for yield estimation in early-stage wheat breeding and can support breeders and growers by enabling earlier, more accurate selection and management decisions in real-world production environments. Full article

Accurate tree species classification using high-resolution unmanned aerial vehicle (UAV) images is crucial for forest carbon cycle research, biodiversity conservation, and sustainable management. However, challenges persist due to high interspecies feature similarity, complex canopy boundaries, and computational demands. To address these, we propose an enhanced DeepLabV3+ model integrating Object-Based Image Analysis (OBIA) and a lightweight attention mechanism. First, an OBIA-based multiscale segmentation algorithm optimizes object boundaries. Key discriminative features, including spectral, positional, and vegetation indices, are then identified using Recursive Feature Elimination with Cross-Validation (RFECV). High-precision training labels are efficiently constructed by combining Random Forest classification with visual interpretation (RFVI). The DeepLabV3+ model is augmented with a lightweight attention module to focus on critical regions while significantly reducing model parameters. Evaluations demonstrate that the improved DeepLabV3+ model achieved overall accuracy (OA) of 94.91% and Kappa coefficient (Kappa) of 92.89%, representing improvements of 2.91% and 4.11% over the original DeepLabV3+ model, while reducing parameters to 5.91 M (78.35% reduction). It significantly outperformed U-Net, PSPNet, and the original DeepLabV3+. This study provides a high-accuracy yet lightweight solution for automated tree species mapping, offering vital technical support for forest carbon sink monitoring and ecological management. Full article

Global increases in drought frequency and severity pose growing risks to forest resilience, particularly for long-lived endemic tree species such as kauri (Agathis australis). Building on prior leaf-level work, this study assessed the utility of multitemporal canopy-scale hyperspectral imaging to characterise water stress in both controlled nursery and field conditions. Two complementary experiments were undertaken: (i) a 10-week controlled-environment experiment comparing drought and control groups, and (ii) a field-based assessment of juvenile kauri trees across multiple time points with contrasting soil volumetric water content. In the controlled-environment experiment, drought-treated seedlings exhibited delayed physiological responses, with reductions in stomatal conductance and assimilation emerging only after three weeks. In contrast, time-series analysis of narrow band hyperspectral indices (NBHIs) revealed detectable stress signatures within one week after drought initiation, with early sensitivity driven by structural and pigment-related indices. As stress progressed, pigment-specific indices became the dominant predictors. These findings were consistent with the field-based experiment. Variation in leaf equivalent water thickness (EWT) was strongly explained by pigment-sensitive indices, including Pigment Specific Simple Ratio Carotenoid (PSSRc) and Carotenoid Reflectance indices (CRI700 and CRI550), which together accounted for ca. 87% of the variance. Structural indices such as the Normalised Difference Vegetation Index (NDVI) also ranked among the top 20 predictors, but had comparatively lower explanatory power (<75%). Overall, the two experiments show that canopy-based hyperspectral imaging provides early, sensitive, and consistent detection of water stress in kauri. The findings highlight a scalable approach for monitoring drought impacts on kauri and offer a foundation for developing operational forest health tools under increasing climate pressure. Full article

Street greening is widely recognized as influencing resident well-being and housing prices, and street-view imagery provides a fine-grained data source for quantifying urban microenvironments. However, existing research predominantly relies on single indicators such as the Green View Index (GVI) and overall green coverage/volume lacking a systematic analysis of how the hierarchical structure of trees, shrubs, and grass relates to housing prices. This study examines the high-density block context of Tianjin’s six urban districts. Using the Street Greening Space Structure (SGSS) dataset to construct greening structure configurations, we integrate housing-price data, neighborhood attributes, and 13,280 street-view images from the study area. We quantify how “visibility and hierarchical ratios” are capitalized on in the housing market and identify auditable threshold ranges and contextual gating. We propose an urban–forest structural system centered on visibility and hierarchical ratios that links street-level observability to ecosystem services. Employing an integrated framework combining Geographical-XGBoost (G-XGBoost) and SHapley Additive exPlanations (SHAP), we move beyond average effects to reveal structural detail and contextual heterogeneity in capitalization. Our findings indicate that tree visibility G_TVI is the most robust and readily capitalized price signal: when G_TVI increases from approximately 0.06 to 0.12–0.16, housing prices rise by about 8%–10%. Hierarchical structure is crucial: balanced tree–shrub ratios and moderate shrub–grass ratios translate “visible green” into functional green. Capitalization effects are environmentally conditioned—more pronounced along corridors with high centrality and accessibility—and are likewise common in dense East Asian metropolises (e.g., Beijing, Shanghai, Seoul, and Tokyo) and rapidly motorizing cities (e.g., Bangkok and Jakarta). These patterns suggest parametric prescriptions that prioritize canopy-corridor continuity and keep ratios within actionable threshold bands. We translate these findings into urban greening strategies that prioritize canopy continuity, under-canopy permeability, and maintainability, providing sustainability-oriented, parameterized guidance for converting urban greening structure into ecological capital for sustainable cities. Full article

Under climate change, the importance of ecosystem monitoring has been repeatedly emphasized over the past decades. Leaf Area Index (LAI), a key ecosystem variable linking the atmosphere and rhizosphere, has been widely studied through various LAI measurement methods. As satellite-based LAI products continue to advance, the demand for extensive and periodic in situ LAI observations has also increased. In this study, we evaluated the combinations of binarization techniques and temporal filtering to reduce variability in an automatic in situ LAI observation network using fisheye lens imagery, which was established by the National Institute of Forest Science (NIFoS). Compared to the widely used methods such as Otsu thresholding (Otsu) and K-means clustering (K-means), the deep learning (DL) method showed more stable LAI time series under field conditions. Under different illumination conditions, mean LAI values fluctuated significantly—from 0.89 to 3.15—depending on image acquisition time. Furthermore, sixteen temporal filtering methods were tested to identify a reasonable range of LAI values, with optimal post-processing strategies suggested: seven-day moving average for maximum LAI (LAI different range among filtering methods −6.1~−1.5) and a three-day moving average excluding rainy days for minimum LAI (LAI different range among filtering methods 0~0.9). This study highlights uncertainties in canopy classification methods, the effects of acquisition timing and lighting, and the necessity of outlier filtering in automatic LAI networks. Despite these challenges, the need for automated LAI observation system is growing, particularly in complex and fragmented forests such as those found in South Korea. Full article

The urban forest canopy provides critical ecosystem services, including carbon storage and sequestration. Healthy, well-managed trees in an urban setting can provide these services in a way comparable to forests managed for production or as nature preserves. Disturbance events threaten these benefits by reducing canopy cover and biomass. A tornado struck Ruston, Louisiana, on 25 April 2019, resulting in severe canopy damage through a swatch of the city. We used iTree Canopy to obtain estimates of ecosystem services (carbon sequestration, etc.) and converted this to a per-pixel value before interpolating for the study area. Fractional vegetation estimates obtained from spectral unmixing were obtained from pre- and post-tornado images using Sentinel-2 data and applied to weight damage. Pre- and post-tornado assessments revealed that Ruston’s urban forest canopy sequestered 85% of its pre-storm capability, with an estimated decline in social value of approximately $36,000. Assessing disturbance-based landscape changes, and subsequently calculating fractional changes in biomass and corresponding monetary impacts, will increasingly be looked to as ecosystem services and severe weather events are expected to become more commonplace in the future. The methodology employed demonstrates a cost-effective way to assess disturbance impacts in small urban areas, offering a framework to small municipalities to monitor canopy dynamics. Full article

As a vital carbon reservoir in terrestrial ecosystems, forest canopy height plays a pivotal role in determining the precision of biomass estimation and carbon storage calculations. Acquiring an accurate Canopy Height Map (CHM) is crucial for building carbon budget models at regional and global scales. A novel UNet++ deep-learning model was constructed using Sentinel-1 and Sentinel-2 multispectral remote sensing images to estimate forest canopy height data based on full-waveform LiDAR measurements from the Global Ecosystem Dynamics Investigation (GEDI) satellite. A 10 m resolution CHM was generated for Chaling County, China. The model was evaluated using independent validation samples, achieving an R² of 0.58 and a Root Mean Square Error (RMSE) of 3.38 m. The relationships between multiple Relative Height (RH) metrics and field validation data are examined. It was found that RH98 showed the strongest correlation, with an R² of 0.56 and RMSE of 5.83 m. Six different preprocessing algorithms for GEDI data were evaluated, and the results demonstrated that RH98 processed using the ‘a1’ algorithm achieved the best agreement with the validation data, yielding an R² of 0.55 and RMSE of 5.54 m. The impacts of vegetation coverage, assessed through Normalized Difference Vegetation Index (NDVI), and terrain slope on inversion accuracy are explored. The highest accuracy was observed in areas where NDVI ranged from 0.25 to 0.50 (R² = 0.77, RMSE = 2.27 m) and in regions with slopes between 0° and 10° (R² = 0.61, RMSE = 2.99 m). These results highlight that the selection of GEDI data preprocessing methods, RH metrics, vegetation density, and terrain characteristics (slope) all have significant impacts on the accuracy of canopy height estimation. Full article

Previous researches have proved that the synchronized use of inexpensive RGB images, image processing, and machine learning (ML) can accurately identify crop stress. Four Machine Learning Image Modules (MLIMs) were developed to enable the rapid and cost-effective identification of sugar beet stresses caused by water and/or nitrogen deficiencies. RGB images representing stressed and non-stressed crops were used in the analysis. To improve robustness, data augmentation was applied, generating six variations on each image and expanding the dataset from 150 to 900 images for training and testing. Each MLIM was trained and tested using 54 combinations derived from nine canopy and RGB-based input features and six ML algorithms. The most accurate MLIM used RGB bands as inputs to a Multilayer Perceptron, achieving 96.67% accuracy for overall stress detection, and 95.93% and 94.44% for water and nitrogen stress identification, respectively. A Random Forest model, using only the green band, achieved 92.22% accuracy for stress detection while requiring only one-fourth the computation time. For specific stresses, a Random Forest (RF) model using a Scale-Invariant Feature Transform descriptor (SIFT) achieved 93.33% for water stress, while RF with RGB bands and canopy cover reached 85.56% for nitrogen stress. To address the trade-off between accuracy and computational cost, a bargaining theory-based framework was applied. This approach identified optimal MLIMs that balance performance and execution efficiency. Full article

Imaging in controlled agriculture helps maximize plant growth by saving labor and optimizing resources. By monitoring specific plant traits, growers can prevent crop losses by correcting environmental conditions that lead to physiological disorders like leaf tipburn. This study aimed to identify morphometric and spectral markers for the early detection of tipburn in two Romaine lettuce (Lactuca sativa) cultivars (‘Chicarita’ and ‘Dragoon’) using an image-based system with color and multispectral cameras. By monitoring tipburn in treatments using melatonin, lettuce cultivars, and with and without supplemental lighting, we enhanced our system’s accuracy for high-resolution tipburn symptom identification. Canopy geometrical features varied between cultivars, with the more susceptible cultivar exhibiting higher compactness and extent values across time, regardless of lighting conditions. These traits were further used to compare simple linear, logistic, least absolute shrinkage and selection operator (LASSO) regression, and random forest models for predicting leaf fresh and dry weight. Random forest regression outperformed simpler models, reducing the percentage error for leaf fresh weight from ~34% (LASSO) to ~13% (RMSE: 34.14 g to 17.32 g). For leaf dry weight, the percentage error decreased from ~20% to ~12%, with an explained variance increase to 94%. Vegetation indices exhibited cultivar-specific responses to supplemental lighting. ‘Dragoon’ consistently had higher red-edge chlorophyll index (CIrededge), enhanced vegetation index, and normalized difference vegetation index values than ‘Chicarita’. Additionally, ‘Dragoon’ showed a distinct temporal trend in the photochemical reflectance index, which increased under supplemental lighting. This study highlights the potential of morphometric and spectral traits for early detection of tipburn susceptibility, optimizing cultivar-specific environmental management, and improving the accuracy of predictive modeling strategies. Full article

Drought-induced forest mortality threatens biodiversity globally, particularly in arid, and semi-arid woodlands. The continual development of remote sensing approaches enables enhanced monitoring of forest health. Herein, we investigate the ability of a limited ground-truthed canopy dieback dataset and satellite image derived Normalised Difference Vegetation Index (NDVI) to make inferences about forest health as temporal and spatial extent from its collection increases. We used ground-truthed observations of relative canopy mortality from the Pinus edulis-Juniperus osteosperma woodlands of southeastern Utah, United States of America, collected after the 2017–2018 drought, and PlanetScope satellite imagery. Through assessing different modelling approaches, we found that NDVI is significantly associated with sitewide mean canopy dieback, with beta regression being the most optimal modelling framework due to the bounded nature of the variable relative canopy dieback. Model performance was further improved by incorporating the proportion of J. osteosperma as an interaction term, matching the reports of species-specific differential dieback. A time-series analysis revealed that NDVI retained its predictive power for our whole testing period; four years after the initial ground-truthing, thus enabling retrospective inference of defoliation and regreening. A spatial random forest model trained on our ground-truthed observations accurately predicted dieback across the broader landscape. These findings demonstrate that modest field campaigns combined with high-resolution satellite data can generate reliable, scalable insights into forest health, offering a cost-effective method for monitoring drought-impacted ecosystems under climate change. Full article

When estimating above-ground biomass (AGB) across multiple growth stages, vegetation indices (VIs) have limitations due to saturation under dense canopies and poor sensitivity to vertically growing organs (e.g., panicles). Discrete wavelet transform (DWT) can extract multi-directional, multi-frequency texture features reflecting canopy structure changes, but its application in crop biomass monitoring is underexplored. Therefore, to evaluate whether DWT-based textures can be used to estimate AGB across multiple growth stages and whether combining VIs can improve estimation accuracy, two-year field experiments involving four rice varieties and five nitrogen treatments were conducted. UAV multispectral images were acquired during the critical growth stages, from which Vis and wavelet textures (WTs) were extracted, and novel wavelet texture indices (WTIs) were constructed. Correlation analysis guided feature selection, and simple regression, multiple linear regression, and Optuna-optimized random forest were employed to develop rice AGB estimation models. The results indicated: (1) Compared to a single WT, the WTIs exhibited higher correlation with rice AGB across different growth stages. (2) Among the three models, the RF model performed best. Specifically, using only VIs to estimate AGB during pre-heading yielded relatively higher accuracy (R² = 0.713), while using WTIs to estimate AGB during post-heading and all-stage yielded higher accuracy (R² = 0.709 and 0.668). (3) Combining WTIs with VIs significantly improves the prediction accuracy of AGB at different growth stages (R² = 0.782, 0.769, and 0.732; RMSE = 114.655, 161.779, and 223.654 g/m²), with R² improving by 10–15% and RMSE decreasing by 13–17% compared to the VIs. The study demonstrates that DWT-based textures can effectively assist in the high-precision estimation of rice AGB. Moreover, integrating WTIs with VIs enables accurate and stable prediction of rice AGB under different management practices and varieties, providing an economical and efficient method for estimating rice AGB. Full article

Accurate classification of tree species is crucial for forest management and biodiversity conservation. Remote sensing technology offers a unique capability for classifying and mapping trees across large areas; however, the accuracy of extracting and identifying individual trees remains challenging due to the limitations of available imagery and phenological variations. This study presents a novel integrated machine learning (ML) and Geographic Object-Based Image Analysis (GEOBIA) framework to enhance tree species classification in a botanical garden using multi-temporal unmanned aerial vehicle (UAV) imagery. High-resolution UAV imagery (2.3 cm/pixel) was acquired across four different seasons (summer, autumn, winter, and early spring) to incorporate the phenological changes. Spectral, textural, geometrical, and canopy height features were extracted using GEOBIA and then evaluated with four ML models (Random Forest (RF), Extra Trees (ET), eXtreme gradient boost (XGBoost), and Support Vector Machine (SVM)). Multi-temporal data significantly outperformed single-date imagery, with RF achieving the highest overall accuracy (86%, F1-score 0.85, kappa 0.83) compared to 57–75% for single-date classifications. Canopy height and textural features were dominant for species identification, indicating the importance of structural variations. Despite the limitations of moderate sample size and a controlled botanical garden setting, this approach offers a robust framework for forest and urban landscape managers as well as remote sensing professionals, by optimizing UAV-based strategies for precise tree species identification and mapping to support urban and natural forest conservation. Full article

Maize (Zea mays L.) is a key global cereal crop with significant relevance to food security. Maize yield prediction is challenged by cultivar diversity and varying management practices. This preliminary study was conducted at Youyi Farm, Heilongjiang Province, China. Three maize cultivars (Songyu 438, Dika 1220, Dika 2188), two fertilization rates (700 and 800 kg·ha⁻¹), and three planting densities (70,000, 75,000, and 80,000 plants·ha⁻¹) were evaluated across 18 distinct cropping treatments. During the V6 (Vegetative 6-leaf stage), VT (Tasseling stage), R3 (Milk stage), and R6 (Physiological maturity) growth stages of maize, multi-temporal canopy spectral images were acquired using an unmanned aerial vehicle (UAV) equipped with a multispectral sensor. In situ measurements of key agronomic traits, including plant height (PH), stem diameter (SD), leaf area index (LAI), and relative chlorophyll content (SPAD), were conducted. The optimal vegetation indices (VIs) and agronomic traits were selected for developing a maize yield prediction model using the random forest (RF) algorithm. Results showed the following: (1) Vegetation indices derived from the red-edge band, particularly the normalized difference red-edge index (NDRE), exhibited a strong correlation with maize yield (R = 0.664), especially during the tasseling to milk ripening stage; (2) The integration of LAI and SPAD with NDRE improved model performance, achieving an R² of 0.69—an increase of 23.2% compared to models based solely on VIs; (3) Incorporating SPAD values from middle-canopy leaves during the milk ripening stage further enhanced prediction accuracy (R² = 0.74, RMSE = 0.88 t·ha⁻¹), highlighting the value of vertical-scale physiological parameters in yield modeling. This study not only furnishes critical technical support for the application of UAV-based remote sensing in precision agriculture at the field-plot scale, but also charts a clear direction for the synergistic optimization of multi-dimensional agronomic traits and spectral features. Full article

Forest degradation, characterized by the gradual loss of the forest’s ecological and ecosystem functions, has been happening rapidly in the Amazon. Its main anthropogenic vectors are deforestation, forest fragmentation, selective logging, forest fires, and the edge effect. Impacts on the forest canopy and biomass can be estimated using satellite images and field data. The present study examines the dynamics of edges created annually by forest clearing and the effects of these edges considering the annual extent and loss of forest biomass between 2007 and 2023 in the municipality of Rorainópolis, located in the southern portion of the state of Roraima, in the far north of the Brazilian Amazon. We (i) delimited the edge areas created annually by deforestation between 2007 and 2023; (ii) tested the hypothesis of the existence of a spatial gradient for forest degradation using the increasing distance from the edge as a reference and the spectral behavior of three vegetation indices (NDVI, NBR, and NDWI) at the pixel level from average values of images from the Landsat-5/8 and Sentinel-2 satellites; and (iii) estimated the biomass exposed to deforestation and the edge effect and the consequent loss of biomass due to these processes. The loss of biomass in the study area due to deforestation totaled 17.1 × 10⁶ Mg in 2023, and the forest edge areas totaled 244.9 km², containing 10.5 × 10⁶ Mg of biomass. During 2023, we estimated a cumulative loss of 0.92 × 10⁶ Mg (8.73%). Analysis of the three vegetation indices showed that there is a gradient of forest degradation, characterized by an increase in the pixel index value from the edge to the interior of the forest. Forest degradation due to the edge effect is an important source of carbon emissions and should be included in national reports on greenhouse gas emissions. Full article