Search Results (162)

This study investigates the improvement effect and micro-mechanism of guar gum and palm fibers, two eco-friendly materials, on expansive soil. The study uses disintegration tests, unconfined compressive strength tests, triaxial compression tests, and SEM analysis to evaluate the enhancement of mechanical properties. The results show that the guar gum–palm fiber composite significantly improves the compressive and shear strength of expansive soil. The optimal ratio is 2% guar gum, 0.4% palm fiber, and 6 mm palm fiber length. Increasing fiber length initially boosts and then reduces unconfined compressive strength. Guar gum increases unconfined compressive strength by 187.18%, further improved by 20.9% with palm fibers. When fiber length is fixed, increasing palm fiber content increases and then stabilizes peak stress and shear strength (cohesion and internal friction angle), improving by 27.30%, 52.1%, and 12.4%, respectively, compared to soil improved with only guar gum. Micro-analysis reveals that guar gum enhances bonding between soil particles via a gel matrix, improving water stability and mechanical properties, while palm fibers reinforce the soil and inhibit crack propagation. The synergistic effect significantly enhances composite-improved soil performance, offering economic and environmental benefits, and provides insights for expansive soil engineering management. Full article

This review article focuses on the long-term durability challenges associated with bamboo fiber-reinforced polymer composites when subjected to various environmental aging conditions such as water immersion, hygrothermal fluctuations, ultraviolet (UV) radiation, soil burial, and refrigerated storage. The primary issue addressed is the degradation of mechanical and structural performance of bamboo fiber-reinforced polymer composites due to moisture absorption, fiber swelling, and fiber–matrix interface deterioration. To mitigate these aging effects, the study evaluates and compares multiple strategies, including chemical and physical fiber surface treatments, filler additions, and fiber hybridization, which aim to enhance moisture resistance and mechanical stability. These composites are relevant in automotive interiors, construction panels, building insulation, and consumer goods due to their eco-friendly nature and potential to replace conventional synthetic composites. This review is necessary to consolidate current knowledge, identify effective enhancement approaches, and guide the development of environmentally resilient bamboo fiber-reinforced polymer composites for real-world applications. Full article

This study elucidates the synergistic effects of polypropylene fiber and cement (physical–chemical) on stabilized expansive soil slurry. A comparative analysis was conducted on the fluidity, 28-day mechanical strength, and shrinkage properties (autogenous and drying) of slurries with different modifications. The underlying mechanisms were further investigated through Scanning Electron Microscopy (SEM) and Energy Dispersive Spectroscopy (EDS) analysis. Results demonstrate that the cement addition substantially enhanced fluidity, mechanical strength, and early-age volume stability through hydration. However, it was insufficient to mitigate long-term drying shrinkage at low dosages. Conversely, incorporating 0.5% polypropylene fiber reduced slurry fluidity but markedly improved flexural strength. Crucially, a pronounced synergistic effect was observed in the co-modified slurry; the specimen with 20% cement and 0.5% fiber exhibited a 28-day drying shrinkage of only 0.57%, a performance comparable to the specimen with 60% cement and no fibers. Microstructural analysis revealed that cement hydration products created a robust fiber-matrix interfacial transition zone, evidenced by C-S-H gel enrichment. This enhanced interface enabled the fibers to effectively bridge microcracks and restrain both autogenous and drying shrinkage. This research validates that the combined cement–fiber approach is a highly effective strategy for improving expansive soil slurry, yielding critical enhancements in flexural performance and long-term dimensional stability while allowing for a significant reduction in cement content. Full article

To address the engineering challenges associated with Guilin red clay, such as its potentially low strength and unfavorable mechanical behavior, this study investigated the effectiveness of lignin and lime as modifiers. Consolidation undrained triaxial tests and scanning electron microscopy (SEM) were employed to evaluate the strength characteristics and microstructural changes in modified clay specimens with varying dosages. The results demonstrate distinct strengthening mechanisms: Lignin exhibits an optimal dosage (6%), significantly increasing cohesion and internal friction angle through physical reinforcement (“soil fiber” formation), but higher dosages (8%) lead to particle separation and strength reduction. In contrast, lime provides continuous and substantial strength enhancement with increasing dosage (up to 8%), primarily through chemical reactions producing cementitious compounds (e.g., C-S-H, C-A-H) that densify the structure. Consequently, lime-modified clay shows significantly higher cohesion and internal friction angle compared to lignin-modified clay at equivalent or higher dosages, with corresponding stress–strain curves shifting from enhanced (strain-hardening) to softening behavior. These findings provide practical insights into red clay improvement in geotechnical engineering applications. Full article

Leveraging the sensitivity of long-period fiber grating (LPFG) to changes in the environmental refractive index, an LPFG-based seawater concentration monitoring sensor is proposed. Considering the highly saltine and alkali characteristics of the sensor’s operating environment, the proposed sensor is packaged by basalt fiber-reinforced polymer (BFRP), and the sensor’s sensitivities were studied by sodium chloride and calcium chloride solution concentration experiments and one real-time sodium chloride solution concentration monitoring experiment. The test results show the wavelength of LPFG, a 3 dB bandwidth and a peak loss of LPFG’s spectrogram change with changes in the concentration of sodium chloride or calcium chloride solutions, but only the wavelength has a good linear relationship with the change in solution concentration, and the sensing coefficient is −0.160 nm/% in the sodium chloride solution and −0.225 nm/% in the calcium chloride solution. The real-time monitoring test further verified the sensor’s sensing performance, with an absolute measurement error of less than 1.8%. The BFRP packaged sensor has good corrosion resistance and a simple structure, and it has a certain application value in the monitoring of salinity in the marine environment and coastal soil. Full article

Soil stabilization with hydraulic binders like cement is widely used in road construction but significantly contributes to CO₂ emissions. This study investigates a more sustainable alternative involving the use of dispersed polypropylene fiber reinforcement to improve the mechanical properties of stabilized soils while reducing cement consumption. Nine clay sand mixtures with varying cement (2–6%) and fiber (0–0.5%) contents were tested using unconfined compressive strength (UCS) and ultrasonic pulse velocity (UPV) methods. Fiber addition improved UCS by 5.59% in a mix with 2% cement and 0.25% fibers and by 25.45% in one with 4% cement and 0.25% fibers. This shows that fibers can improve strength at different cement levels. A novel reinforcement index ($R_i$) was introduced to predict UCS empirically. The model showed that using 0.5% fibers ($R_i=1.0\%$) enabled a 25.12% reduction in cement without compromising strength. However, this improvement came at the cost of stiffness: deformation modulus $E_{50}$ decreased by up to 67.51% at 0.5% fiber content. Statistical validation using MAE, RMSE, and MAPE confirmed the model’s accuracy. Although the results were based on a single soil type, they showed that polypropylene fibers can support decarbonization efforts by reducing cement demand and represent a technically feasible approach to more sustainable geotechnical engineering applications. Full article

The agricultural sector faces growing pressure to enhance productivity and sustainability, prompting innovation in machinery design. Traditional materials such as steel still dominate but are a cause of increased weight, soil compaction, increased fuel consumption, and corrosion. Composite materials—and, more specifically, fiber-reinforced polymers (FRPs)—offer appealing alternatives due to their high specific strength and stiffness, corrosion resistance, and design flexibility. Meanwhile, increasing environmental awareness has triggered interest in biocomposites, which contain natural fibers (e.g., flax, hemp, straw) and/or bio-based resins (e.g., PLA, biopolyesters), aligned with circular economy principles. This review offers a comprehensive overview of synthetic composites and biocomposites for agricultural machinery and equipment (AME). It briefly presents their fundamental constituents—fibers, matrices, and fillers—and recapitulates relevant mechanical and environmental properties. Key manufacturing processes such as hand lay-up, compression molding, resin transfer molding (RTM), pultrusion, and injection molding are discussed in terms of their applicability, benefits, and limits for the manufacture of AME. Current applications in tractors, sprayers, harvesters, and planters are covered in the article, with advantages such as lightweighting, corrosion resistance, flexibility and sustainability. Challenges are also reviewed, including the cost, repairability of damage, and end-of-life (EoL) issues for composites and the moisture sensitivity, performance variation, and standardization for biocomposites. Finally, principal research needs are outlined, including material development, long-term performance testing, sustainable and scalable production, recycling, and the development of industry-specific standards. This synthesis is a practical guide for researchers, engineers, and manufacturers who want to introduce innovative material solutions for more efficient, longer lasting, and more sustainable agricultural machinery. Full article

(1) Background: Soil stability is essential for hydroseeding applications, particularly in erosion-prone areas. This study examines the effects of coir fiber reinforcement on soil properties and optimizes fiber length and content for improved performance. (2) Methods: Triaxial tests, soil physical measurements, and cracking experiments were conducted on sandy and silty soils using five fiber lengths (1–5 cm) and three fiber contents (0.2–0.6%). Principal component analysis (PCA) and Response Surface Methodology (RSM) were applied for optimization. (3) Results: The results show that coir fiber increases soil cohesion, shear strength, porosity, and permeability while reducing bulk density. The best reinforcement occurred at a 3–4 cm fiber length and 0.4–0.6% content, enhancing both the shear strength and crack resistance. Correlation analysis indicated a positive relationship between porosity and shear strength and a negative correlation between crack ratio and shear strength, confirming fiber reinforcement benefits. RSM analysis identified 3.051 cm + 4.07% as optimal for sandy soil and 3.376 cm + 0.456% for silty soil. (4) Conclusions: The optimal coir fiber combination significantly improves soil stability, providing theoretical support for optimizing spray substrates. Full article

In response to the need for sustainable soil stabilization alternatives, this study explores the use of waste materials and biopolymers to improve the mechanical behavior of clay from Cartagena, Colombia. Crushed limestone waste (CLW), ground glass powder (GG), recycled gypsum (GY), xanthan gum (XG), and the combination of XG with polypropylene fibers (XG–PPF) were used as stabilizing agents. Samples were compacted at different dry densities and cured for 28 days. Unconfined compressive strength (UCS) and ultrasonic pulse velocity (UPV) tests were conducted to assess the strength and stiffness of the treated mixtures. Results were normalized using the porosity/binder index ($\mathrm{\eta }/B_{iv}$), leading to predictive equations with high determination coefficients (R² = 0.94 for UCS and R² = 0.96 for stiffness). However, XG-treated mixtures exhibited distinct behavior that prevented their inclusion in a unified predictive model, as the fitted exponent x in the porosity/binder index ($\mathrm{\eta }/B_{iv}^x$) differed markedly from the others. While an exponent of 0.28 was suitable for blends with mineral binders, the optimal x values for XG and XG–PPF mixtures were significantly lower at 0.02 and 0.03, respectively, reflecting their unique gel-like and fiber-reinforced characteristics. The analysis of variance (ANOVA) identified cement content and compaction density as the most influential factors, while some interactions involving the residues were not statistically significant, despite aligning with experimental trends. The findings support the technical viability of using sustainable additives to enhance soil properties with reduced environmental impact. Full article

Targeting the engineering properties of poor strength and susceptibility to damage in roadbeds and slopes within clay regions, xanthan gum is employed as a soil enhancer, concurrently addressing the issue of the low utilization rate of plant coir fiber. The unconfined compressive strength test (UCS) is used to analyze the influence of different maintenance methods, maintenance duration, xanthan gum dosage, and coconut fiber dosage on the mechanical properties of the enhanced soil. Furthermore, based on scanning electron microscope (SEM) tests, the underlying mechanisms governing the mechanical properties of fiber-reinforced xanthan gum-improved soil are uncovered. The results indicated that the compressive strength of amended soil is significantly enhanced by the incorporation of xanthan gum and coir fiber. After 28 days of conditioning, the compressive strength of the amended soil under dry conditions (conditioned in air) was significantly higher (3 MPa) than that under moist conditions (conditioned in plastic wrap) (0.57 MPa). Xanthan gum influenced both the compressive strength of the specimens and the degree of strength enhancement, whereas coir fibers not only augmented the strength of the specimens but also converted them from brittle to ductile, thereby imparting residual strength post-destruction. Microscopic analysis indicates that the incorporation of xanthan gum and coconut shell fiber significantly diminishes the number of pores and cracks within the soil matrix, while enhancing the internal inter-particle cementation. This synergistic effect contributes to soil improvement, providing theoretical and technical guidance for roadbed enhancement and slope repair. Full article

Straw reinforcement improves the mechanical properties of soil matrices by uniformly incorporating dispersed straw materials, demonstrating advantages in strength enhancement, toughness improvement, and deformation control. This study aims to compare the reinforcement effects of different types of straw on soil and clarify the optimal method for straw-based soil stabilization. For wheat straw-reinforced soil using different processing methods (straw segment, straw powder, and straw ash) and mass contents, the basic geotechnical properties of each mixture were first determined. Triaxial tests were then performed under varying confining pressures and compaction conditions to assess the strength and modulus characteristics of the different reinforced soil specimens, and the microstructural characteristics of fiber-reinforced soil were investigated using scanning electron microscopy (SEM) analysis. The experimental results indicated that the strength and ductility of soils increased significantly with the addition of straw. The optimal performance of straw-reinforced soils occurred at 0.3% content. The elastic modulus increased by 85%, 64%, and 57% under confining pressures of 50 kPa, 100 kPa, and 200 kPa, respectively. At 200 kPa, straw segments provided the highest modulus increase of 57%, while straw ash achieved the greatest strength improvement of 97%. Furthermore, considering both compaction effects and cost efficiency, a compaction degree of 95% is recommended for straw-reinforced soil in engineering applications. Based on scanning electron microscopy, it was observed that the distribution characteristics of different straw types within the soil exhibit distinct patterns. This study aims to provide data to support the efficient utilization of straw materials in engineering applications. Full article

Unstable sandy soils pose significant challenges for buried pipelines due to soil–infrastructure interaction, leading to settlement that increases the risk of displacement and stress-induced fractures. In earthquake-prone regions, seismic-induced ground deformation further threatens underground infrastructure. Fiber-reinforced polymer (FRP) composites have emerged as a sustainable alternative to conventional piling materials, addressing durability issues in deep foundations. This paper introduces novel explicit models for predicting the maximum settlement of oil pipelines supported by concrete or polymer micropiles under seismic loading. Using genetic programming (GP), this study develops closed-form expressions based on simplified input parameters—micropile dimensions, pile spacing, soil properties, and peak ground acceleration—improving the models’ practicality for engineering applications. The models were evaluated using a dataset of 610 data points and demonstrated good accuracy across different conditions, achieving coefficients of determination (R²) as high as 0.92, among good values for other evaluation metrics. These findings contribute to a robust, practical tool for mitigating seismic risks in pipeline design, highlighting the potential of FRP micropiles for enhancing infrastructure resilience under challenging geotechnical scenarios. Full article

Traditional soil stabilization methods, including cement and chemical grouting, are energy-intensive and environmentally harmful. Microbial-induced carbonate precipitation (MICP) technology offers a sustainable alternative by utilizing microorganisms to precipitate calcium carbonate, binding soil particles to improve mechanical properties. However, the application of MICP technology in soil stabilization still faces certain challenges. First, the mineralization efficiency of microorganisms needs to be improved to optimize the uniformity and stability of carbonate precipitation, thereby enhancing the effectiveness of soil stabilization. Second, MICP-treated soil generally exhibits high fracture brittleness, which may limit its practical engineering applications. Therefore, improving microbial mineralization efficiency and enhancing the ductility and overall integrity of stabilized soil remain key issues that need to be addressed for the broader application of MICP technology. This study addresses these challenges by optimizing microbial culture conditions and incorporating polyethylene fiber reinforcement. The experiments utilized sandy soil and polyethylene fibers, with Bacillus pasteurii as the microbial strain. The overall experimental process included microbial cultivation, specimen solidification, and performance testing. Optimization experiments for microbial culture conditions indicated that the optimal urea concentration was 0.5 mol/L and the optimal pH was 9, significantly enhancing microbial growth and urease activity, thereby improving calcium carbonate production efficiency. Specimens with different fiber contents (0% to 1%) were prepared using a stepwise intermittent grouting technique to form cylindrical samples. Performance test results indicated that at a fiber content of 0.6%, the unconfined compressive strength (UCS) increased by 80%, while at a fiber content of 0.4%, the permeability coefficient reached its minimum value (5.83 × 10⁻⁵ cm/s). Furthermore, microscopic analyses, including X-ray diffraction (XRD) and scanning electron microscopy with energy-dispersive spectroscopy (SEM–EDS), revealed the synergistic effect between calcite precipitation and fiber reinforcement. The combined use of MICP and fiber reinforcement presents an eco-friendly and efficient strategy for soil stabilization, with significant potential for geotechnical engineering applications. Full article

Understanding the mechanism of strength degradation in fiber-reinforced soils under freeze–thaw conditions is critical for expanding their engineering applications. In this study, shear tests were conducted on fiber-reinforced soil subjected to 0, 1, 5, 10, 20, and 30 freeze–thaw cycles to investigate variations in shear strength. The mechanisms driving these variations were analyzed through soil shear tests, fiber tensile tests, and fiber pull-out tests, all conducted under identical freeze–thaw conditions. The results indicated that fiber inclusion significantly enhances the shear strength of soils exposed to freeze–thaw cycles. However, the shear strength decreases exponentially as the number of cycles increases. The strength of fiber-reinforced soil is primarily due to the soil strength, fiber strength, and strength of the fiber–soil interface. All three components exhibit an exponential reduction under freeze–thaw conditions, contributing to the overall exponential decrease in the strength of fiber-reinforced soil. Full article

Concrete-filled FRP (Fiber Reinforced Polymer) tube composite piles offer superior corrosion resistance, making them a promising alternative to traditional piles in marine environments. However, their performance under cyclic lateral loads, such as those induced by waves and currents, requires further investigation. This study conducted model tests on 11 FRP composite piles embedded in sand to evaluate their behavior under cyclic lateral loading. Key parameters, including loading frequency, cycle count, loading mode, and embedment depth, were systematically analyzed. The results revealed that cyclic loading induces cumulative plastic deformation in the surrounding soil, leading to a progressive reduction in the lateral stiffness of the pile–soil system and redistribution of lateral loads among piles. Higher loading frequencies enhanced soil densification and temporarily improved bearing capacity, while increased cycle counts caused soil degradation and reduced ultimate capacity—evidenced by an 8.4% decrease (from 1.19 kN to 1.09 kN) after 700 cycles under a 13 s period, with degradation rates spanning 8.4–11.2% across frequencies. Deeper embedment depths significantly decreased the maximum bending moment (by ~50%) and lateral displacement, highlighting their critical role in optimizing performance. These findings directly inform the design of marine structures by optimizing embedment depth and load frequency to mitigate cyclic degradation, ensuring the long-term serviceability of FRP composite piles in corrosive, high-cycle marine environments. Full article