Search Results (6,239)

The economic importance of Carlin-type gold deposits is complicated by the concealed nature of stratiform gold-bearing zones and their occurrence at depths of several tens of meters or more below the present-day surface. This necessitates the use of a wide range of technologies and unconventional, including cost-effective and environmentally friendly, exploration methods to delineate potentially prospective areas. This study explores the possibilities of applying remote sensing methods to organize prospecting and exploration activities for targeting Carlin-type deposits in a more efficient and cost-effective way. The location of Carlin-type gold deposits within areas of orogenic and post-orogenic magmatism, mantle plumes, and linear crustal structures—as demonstrated by previous research in the Nevada and South China metallogenic provinces—may serve as a basis for developing a conceptual model of their distribution. To this end, we developed the GeoNEM (Geodynamic Numeric Environmental Modeling) software in Python, which enables the analysis of the formation of fold and fault structures, melt emplacement and contamination, as well as the duration and rate of geodynamic processes. GeoNEM is based on the computational geodynamics “marker-in-cell” (MIC) method, which treats geological media as extremely high-viscosity fluids. Locations of the brittle deformations of the crust, the formation of which was simulated numerically, can be detected through lineament analysis of remote sensing images. The spatial distribution of such structures—lineaments—serves as a predictive criterion for assessing the prospectivity of territories for Carlin-type gold deposits. It has been demonstrated that remote sensing provides a modern level of efficiency, cost-effectiveness, and comprehensiveness in approaching the exploration and assessment of new Carlin-type gold deposits. This is particularly important in the context of rational resource utilization and cost reduction. Full article

This study developed a two-step conversion strategy for the efficient conversion of bamboo waste into 5-hydroxymethylfurfural (HMF). First, ultrasonic-assisted formic acid pretreatment was used at 80 °C for 3 h, removing approximately 83.7% of hemicellulose and 76.5% of lignin from the biomass, with a cellulose recovery of 93.5%. The ultrasonic step significantly enhanced the chemical action of formic acid through cavitation, allowing formic acid to penetrate deeper into the biomass, thereby more effectively removing hemicellulose and lignin. Subsequently, glucose was obtained through an enzymatic hydrolysis. In the second step of HMF preparation, citric acid in the hydrolysate was combined with ChCl to form an acidic deep eutectic solvent (DES), and metal chlorides were added as Lewis acid catalysts. Experiments results showed that when the ChCl–citric acid ratio was 2:1, and the Ca²⁺ concentration was 100 mM, an HMF yield of 51.9% was obtained at 220 °C for 1.5 h. This study provides an efficient, mild, and environmentally friendly method for the high-value valorization of waste bamboo. Full article

As a future abundant and environmentally friendly clean energy source, the decomposition process of natural gas hydrates is significantly regulated by reservoir structural characteristics. Improper extraction can easily trigger geological hazards, yet current research on the coupling mechanism between wellbore microstructure and decomposition remains incomplete. To elucidate the regulatory role of reservoir structural characteristics, this study employed a self-developed physical simulation system to conduct triaxial creep experiments. It compared the mechanical response and decomposition dynamics of sediments under layered and homogeneous hydrate distribution patterns, while simultaneously monitoring gas production and formation displacement parameters. Results indicate that layered distribution significantly influences overall sediment creep behavior and failure patterns: low-saturation sublayers dominate the creep softening–hardening mechanism, while strain evolution at different timescales and long-term bearing capacity are controlled by low- and high-saturation sublayers, respectively. Creep cohesion and internal friction angle exhibit distinct differences between the two distribution patterns, with the influence mechanisms of relevant mechanical indicators closely related to the roles of sublayers with varying saturations. The study also uncovers the intrinsic link between gas production and stratigraphic subsidence during hydrate decomposition, clarifying the core mechanism by which reservoir structures influence decomposition stability through regulating mechanical responses. The methodologies and conclusions of this research provide scientific support for predicting the long-term stability of natural gas hydrate reservoirs and enabling safe, efficient extraction, while laying the groundwork for the systematic development of comprehensive hydrate technologies. Full article

In an era where environmental consciousness increasingly shapes consumer behaviour, the tourism industry faces the dual challenge of promoting destinations while ensuring ecological sustainability. This study explores how web analytics and big data can be leveraged to enhance the visibility and attractiveness of eco-friendly destinations. Building upon digital marketing and sustainability frameworks, the authors develop a data-driven methodology that integrates website performance metrics, search behaviour patterns, and social media engagement indicators. After data collection, statistical and content analyses were implemented, followed by a Fuzzy Cognitive Map (FCM) to visualise the interrelationships between online user behaviour, environmental awareness, and destination appeal. Full article

The elimination of nitrogen and sulfur compounds from liquid fuel is a critical aspect of reducing environmental pollution. However, the widely utilized hydrodesulfurization and hydrodenitrogenation technologies require harsh operating conditions. Moreover, when operated simultaneously, these processes induce mutual competition and inhibition between the two reactions, thereby limiting the actual removal efficiency. Conversely, non-hydrogenation technologies offer substantial advantages in terms of operating conditions and provide high levels of desulfurization and denitrogenation. Nevertheless, the presence of nitrogen-containing compounds has also been demonstrated to engender competition and inhibition. It is imperative to develop environmentally friendly technologies that can simultaneously desulfurize and denitrogenate. This paper reviews research progress in this field over the past decade, providing a detailed assessment and comparison of hydrogenation and non-hydrogenation technologies, including adsorption, extraction, oxidation and biological methods. Furthermore, it considers future research directions. The article’s aim is to furnish a novel perspective on the development of clean fuel sources and to investigate more economical, sustainable, and commercially viable desulfurization and denitrogenation methods. Full article

Greenwashing by unvalidated environmental labelling is increasingly common and highly problematic due to the potential to mislead consumers. This is especially concerning for products that pose health risks, including alcohol. As environmental sustainability becomes more important to consumers, it is vital to assess changes in the use of potentially misleading claims over time. Among the first studies of its kind globally, this study aimed to (i) develop a typology of environmental claims displayed on alcohol products in Australia, (ii) examine the prevalence of these claims to establish baseline data for ongoing tracking, and (iii) assess the provision of recycling information. Four claim categories were identified: sustainability, planet friendly, bio-related and carbon-related. Claims featured on 8% of the 5982 sampled products, with considerable variation between alcohol categories. Sustainability claims were the most prevalent (5%). Recycling information appeared on 72% of products. The results suggest ambiguous environmental claims are present although not yet widespread. In contrast, recycling information is much more common although not universal. These findings highlight the need to consider restrictions on unsubstantiated environmental claims on alcohol products that can mislead consumers. Further, a nationally standardised mandatory recycling label should be introduced to assist consumers in reducing their environmental impacts. Full article

Spontaneous coal combustion accounts for more than 90% of mine fires, and at the same time, the ‘dual carbon’ strategy requires fire prevention and extinguishing materials to have both low-carbon and environmentally friendly functions. To meet on-site application needs, a composite gel with fast injection, flame retardant, and CO₂ adsorption functions was developed. PVA-PEI-PAC materials were selected as the gel raw materials, and an orthogonal test with three factors and three levels was used to optimize the gelation time parameters to identify the optimal formulation. The microstructure of the gel, CO₂ adsorption performance, as well as its inhibition rate of CO, a marker gas of coal spontaneous combustion, and its effect on activation energy were systematically characterized through SEM, isothermal/temperature-programmed/cyclic adsorption experiments, and temperature-programmed gas chromatography. The results show that the optimal gel formulation is 14% PVA, 7% PEI, and 5.5% PAC. The gel microstructure is continuous, dense, and rich in pores, with a CO₂ adsorption capacity at 30 °C and atmospheric pressure of 0.86 cm³/g, maintaining over 76% efficiency after five cycles. Compared with raw coal, a 10% gel addition reduces CO release at 170 °C by 25.97%, and the temperature-programmed experiment shows an average CO inhibition rate of 25% throughout, with apparent activation energy increased by 14.96%. The gel prepared exhibited controllable gelation time, can deeply encapsulate coal, and can efficiently adsorb CO₂, significantly raising the coal–oxygen reaction energy barrier, providing an integrated technical solution for mine fire prevention and extinguishing with both safety and carbon reduction functions. Full article

Carbon nanotube (CNT) and graphene-reinforced nanocomposites have become exceptional multifunctional materials because of their exceptional mechanical, thermal, and electrical properties. Recent developments in synthesis methods, dispersion strategies, and interfacial engineering have effectively overcome agglomeration-related limitations by significantly improving filler distribution, matrix compatibility, and load-transfer efficiency. These nanocomposites have better wear durability, corrosion resistance, and surface properties like super-hydrophobicity. A comparative analysis of polymer, metal, and ceramic matrices finds benefits for applications in biomedical, construction, energy, defense, and aeronautics. Functionally graded architecture, energy-harvesting nanogenerators, and additive manufacturing are some of the new fabrication processes that enhance design flexibility and functional integration. In recent years, scalability, life-cycle evaluation, and environmentally friendly processing have all gained increased attention. The development of next-generation, high-performance graphene and carbon nanotube (CNT)-based nanocomposites is critically reviewed in this work, along with significant obstacles and potential next steps. Full article

Syringic acid (SA) is a natural derivative of syringaldehyde (SD), derived from lignin depolymerization. Its application in the food industry focuses on the properties of natural functional ingredients; it is mainly used as a food antioxidant and food preservative, but can also be used as an ingredient to enhance food flavor and functional foods. This compound exhibits a remarkable spectrum of biological activities, including potent antioxidant, anti-inflammatory, neuroprotective, hypoglycemic, detoxifying, and anti-cancer effects, positioning it as a highly promising candidate for pharmaceutical and nutraceutical applications. In this study, suitable sites were first screened through homologous sequence alignment, and a variant of aryl-alcohol oxidase (CgAAO) with high efficiency in catalyzing the conversion of SD to SA was obtained via site-directed mutagenesis. A deep eutectic solvent (DES) system based on choline chloride/urea (ChCl/UR) in water was developed to enhance SA production. Additionally, key parameters of the biological reaction were optimized, including temperature, pH, metal ions, as well as the type and dosage of DES. The optimal performance was achieved using recombinant E. coli pRSFDuet-CgAAO-Y335F whole-cell biocatalysts, yielding 75% and producing 0.75 g/L SA in 100 mM KPB buffer (pH 7.0) containing 5 wt% ChCl/UR and 1 mM Fe³⁺. This study established a novel biosynthetic pathway for SA that was efficient, mild, green, and environmentally friendly. Full article

Z-cut lithium niobate single crystal demonstrates considerable promise for contact-based ultrasonic nondestructive testing and structural health monitoring (SHM) transducers due to its high piezoelectric coefficients, strong electromechanical coupling capability, and environmentally friendly lead-free composition. As a simulation-based theoretical exploration, this study systematically investigates the impact of gap spacing and electrode width in concentric ring configurations on the resonant characteristics and pulse-echo response of ultrasonic transducers by establishing a parametrized finite element model. Numerical simulations reveal that electrode geometry plays a critical role in determining both the effective electromechanical coupling coefficient and echo signal strength. Optimizing the electrode ring width achieved an effective electromechanical coupling coefficient ($k_{\mathit{eff}}$) of 35.2%, while systematic enlargement of the electrode gap further enhanced this value to 50.8%. The study also demonstrates that optimized ring width and adjusted electrode spacing increased the echo signal’s peak-to-peak amplitude ($V_{pp}$) by factors of 4.94 and 2.03, respectively, compared to the poorest-performing configuration within each parameter group. This study establishes that precise design of concentric electrode configurations serves as an effective strategy for tuning lithium niobate ultrasonic transducer characteristics, providing critical design guidelines for developing high-performance ultrasonic transducers for solid medium coupling. Full article

Zeolite imidazolate frameworks (ZIFs)-derived carbon materials have garnered widespread attention as peroxymonosulfate (PMS) activators in removing antibiotics because of their excellent catalytic performance. However, most carbon materials derived from ZIFs exhibit limited efficacy in treating high-concentration (>10 ppm) antibiotic wastewater, and their synthesis methods are environmentally unfriendly. Herein, we develop a simple and environmentally friendly preparation method to synthesize a new type of nitrogen-doped carbon-supported carbon nanotubes coated with cobalt nanoparticle (Co-CNTs@NC) composites via high-temperature calcination of cobalt–zinc bimetallic ZIFs. The material characterization results confirm the successful preparation of Co-CNTs@NC composites featuring a high specific surface area (512.13 m²/g) and a Co content of 5.38 wt%. Across an initial pH range of 3.24–9.00, the Co-CNTs@NC/PMS catalytic system achieved over 84.17% degradation of 20 mg/L tetracycline hydrochloride within 90 min, demonstrating its favorable pH tolerance. The singlet oxygen-dominated degradation mechanism was confirmed by quenching experiments and electron paramagnetic resonance characterization. This work can provide technical guidance and reference significance for the preparation of metal–carbon materials derived from ZIFs with excellent efficiency of removal of high-concentration antibiotics. Full article

The widespread use of antibiotics in human medicine, veterinary care, and livestock production has resulted in their frequent detection in diverse environmental and food matrices, making continuous surveillance of antibiotic residues in food products essential for consumer protection. In this study, a sustainable analytical method based on dispersive liquid–liquid microextraction (DLLME) coupled with UHPLC–MS/MS was developed for the trace determination of sulfamethoxazole, sulfadimethoxine, and enrofloxacin in commercial cow milk and chicken eggs. A natural deep eutectic solvent (NADES) composed of anisaldehyde and octanoic acid (2:1, molar ratio) was employed as a biodegradable extraction solvent, and key extraction parameters were systematically optimized. Under optimized conditions, the method demonstrated excellent linearity (R² ≥ 0.9982), recoveries of 89.5–98.7%, and RSDs ≤ 6.04%. Application to 44 commercial samples from the Saudi market revealed sulfamethoxazole as the most frequently detected antibiotic, occurring in 90% of egg samples (2.17–13.76 µg kg⁻¹) and 70.8% of milk samples (0.26–26.67 µg L⁻¹). A comprehensive evaluation using ten metrics confirmed the method’s greenness, practicality, analytical performance, and innovation. Overall, the proposed NADES–DLLME–UHPLC–MS/MS approach offers a rapid, cost-effective, and environmentally friendly alternative for routine monitoring of antibiotic residues in food matrices. Full article

Slugs are significant agricultural pests and act as vectors for zoonotic parasites. However, current molluscicide options are limited and associated with substantial environmental risks. This study investigates the role of aldehyde dehydrogenase (ALDH) in the biosynthesis of farnesoic acid (FA), a key intermediate in the sesquiterpenoid hormone pathway, in two slug species: Philomycus bilineatus and Laevicaulis alte. Transcriptomic analysis revealed that both species possess conserved sesquiterpenoid biosynthetic pathways, yet they exhibit distinct levels of ALDH gene expression and differences in FA content. RNA interference (RNAi)-mediated gene silencing was employed to validate the potential of these candidate genes as targets for molluscicide development. Structural modeling of ALDH proteins using AlphaFold2 demonstrated notable divergence in the architecture of their active sites, suggesting species-specific enzymatic properties. Citral, a known inhibitor of ALDH, significantly reduced FA production in vivo and exhibited contact toxicity against both slug species. The lethal concentration 50 (LC₅₀) values were determined to be 378.2 g/L for P. bilineatus and 85.2 g/L for L. alte, respectively. Molecular docking analyses indicated that citral binds within the conserved substrate-binding tunnel of ALDH, potentially inhibiting the oxidation of farnesal. These findings establish ALDH as a critical enzymatic target for disrupting endogenous hormone biosynthesis in slugs and support the development of novel, eco-friendly molluscicides targeting the sesquiterpenoid pathway. Full article

Highly accurate quantitative detection of heavy metals is crucial for preventing environmental pollution and safeguarding public health. To address the demand for sensitive and specific detection of Cu²⁺ ions, we have developed carbon dots using a simple hydrothermal process. The synthesized carbon dots are highly stable in aqueous media, environmentally friendly, and exhibit strong blue photoluminescence at 440 nm when excited at 352 nm, with a quantum yield of 5.73%. Additionally, the size distribution of the carbon dots ranges from 2.0 to 20 nm, and they feature excitation-dependent emission. They retain consistent optical properties across a wide pH range and under high ionic strength. The photoluminescent probes are selectively quenched by Cu²⁺ ions, with no interference observed from other metal cations such as Ag⁺, Ca²⁺, Cr³⁺, Fe²⁺, Fe³⁺, Hg²⁺, K⁺, Mg²⁺, Sn²⁺, Pb²⁺, Sr²⁺, and Zn²⁺. The emission of carbon dots exhibits a strong linear correlation with Cu²⁺ concentration in the range of 0–14 μM via a static quenching mechanism, with a detection limit (LOD) of 4.77 μM in water. The proposed carbon dot sensor is low cost and has been successfully tested for detecting Cu²⁺ ions in general water samples collected from rivers in Taiwan. Full article

Bacterial biosurfactants have potential applications in green cleaning due to their environmental friendliness. Among all isolated bacterial strains in this study, strain N33 exhibited the most potent oil-displacing activity and was identified as Pseudomonas aeruginosa. Its biosurfactant yield was approximately 550 mg/L, and structural characterization revealed it to be a glycolipid-type biosurfactant. The oil-displacing ring diameters of the biosurfactant against vegetable oil, paraffin oil, and crude oil reached 6.3 ± 0.3 cm, 5.8 ± 0.2 cm, and 3.8 ± 0.5 cm, respectively. Its critical micelle concentration (CMC) was determined to be 150 mg/L, with a corresponding surface tension of 39.55 mN/m. Notably, this bacterial biosurfactant significantly improved interfacial wettability, reducing the contact angles of vegetable oil, paraffin oil, and crude oil on oil-wetted glass slides from 93.0°, 99.0°, and 98.8° to 10.0°, 15.0°, and 19.0°, respectively. The emulsification efficiency for the three oils was 80%, 57%, and 10%, respectively. Furthermore, capillary oil removal assays verified that the biosurfactant could efficiently strip oil films from the inner walls of capillaries. These findings demonstrate that the biosurfactant produced by P. aeruginosa strain N33 possesses considerable oil-removal efficacy, thereby providing a novel candidate for the research, development, and application of green detergents. Full article