Search Results (185)

This study presents the development of a TiO₂ nanowire-based electrochemical sensor for the selective and sensitive detection of hydrogen peroxide (H₂O₂) under neutral pH conditions, with a particular focus on its application in analyzing plant stress. The sensor exhibited a linear detection range of 0–0.5 mM, a sensitivity of 0.0393 mA · mM⁻¹, and a detection limit of 2.8 μM in phosphate-buffered saline solution (PBS, pH 7.4). This work’s main novelty lies in the systematic investigation of the relationship between TiO₂ nanostructure morphology, which is controlled by hydrothermal synthesis parameters, and the resulting sensor performance. Interference studies confirmed excellent selectivity in the presence of common electroactive species found in plant samples, such as NaCl, KNO₃, glucose, citric acid, and ascorbic acid. Real sample analysis using barley plant extracts grown under salt stress and treated with Fe₃O₄ nanoparticles confirmed the sensor’s applicability in complex biological matrices, enabling accurate quantification of endogenously produced H₂O₂. Endogenous H₂O₂ concentrations were found to range from near-zero levels in control and Fe₃O₄-only treated plants, to elevated levels of up to 0.36 mM in salt-stressed samples. These levels decreased to 0.25 and 0.15 mM upon Fe₃O₄ nanoparticle treatment, indicating a dose-dependent mitigation of stress. This finding was supported by genome template stability (GTS) analysis, which revealed improved DNA integrity in Fe₃O₄-treated plants. This study takes an integrated approach, combining the development of a nanostructured sensor with physiological and molecular stress assessment. The urgent need for tools to detect stress at an early stage and manage oxidative stress in sustainable agriculture underscores its relevance. Full article

DNA methylation, as a critical epigenetic modification, plays a central role in gene regulation and has emerged as a powerful biomarker for early disease diagnostics, particularly in cancer. Owing to the limitations of traditional bisulfite sequencing—such as high cost, complexity, and chemical degradation—electrochemical biosensors have gained substantial attention as promising alternatives. This review summarizes recent advancements in electrochemical platforms for bisulfite-free detection of DNA methylation, encompassing direct oxidation strategies, enzyme-assisted recognition (e.g., restriction endonucleases and methyltransferases), immunoaffinity-based methods, and a variety of signal amplification techniques such as rolling circle amplification and catalytic hairpin assembly. Additional approaches, including strand displacement, magnetic enrichment, and adsorption-based detection, are also discussed. These systems demonstrate exceptional sensitivity, often down to the attomolar or femtomolar level, as well as high selectivity, reproducibility, and suitability for real biological matrices. The integration of nanomaterials and redox-active probes further enhances analytical performance. Importantly, many of these biosensing platforms have been validated using clinical samples, reinforcing their translational relevance. The review concludes by outlining current challenges and future directions, emphasizing the potential of electrochemical biosensors as scalable, cost-effective, and minimally invasive tools for real-time epigenetic monitoring and early-stage disease diagnostics. Full article

An electrochemical aptasensor was developed for the rapid and sensitive detection of ciprofloxacin (CPX) in milk samples. The device was fabricated on a polyethylene terephthalate (PET) substrate using a screen-printing technique with carbon-based conductive ink. Gold nanoparticles (AuNPs) were incorporated to enhance aptamer immobilization and facilitate electron transfer at the electrode surface. The sensor’s analytical performance was optimized by adjusting key parameters, including AuNP volume, DNA aptamer concentration, and incubation times for both the aptamer and the blocking agent (6-mercapto-1-hexanol, MCH). Differential pulse voltammetry (DPV) measurements demonstrated a linear response ranging from 10 to 50 nmol L⁻¹ and a low detection limit of 3.0 nmol L⁻¹. When applied to real milk samples, the method achieved high recovery rates (101.4–106.7%) with a relative standard deviation below 3.1%, confirming its robustness. This disposable and cost-effective aptasensor represents a promising tool for food safety monitoring, with potential for adaptation to detect other pharmaceutical residues in dairy products. Full article

A novel nanocomposite based on electrochemically reduced graphene oxide (ERGO) and electropolymerized polyproflavine (PPFL) was obtained within a “one-pot” synthesis from natural deep eutectic solvent (NADES). NADES consisted of citric acid, glucose, and water in a molar ratio of 1:1:6. The synthesis was carried out in potentiostatic mode by consequent potential application in cathodic and anodic areas. The composite was applied to develop the impedimetric DNA sensor for anthracycline determination. The sensor has provided linear range from 10 nM to 0.1 mM for doxorubicin, from 1 pM to 10 nM for epirubicin, and from 10 pM to 10 nM for idarubicin, with the limit of detection 3 nM, 1 pM, and 5 pM, respectively. The concentrations of doxorubicin below 10 nM did not have any other influence on epirubicin and idarubicin determination despite their molecular structure similarity. The sensor developed was used for the determination of anticancer medications, such as doxorubicin, epirubicin, and idarubicin, in their standard solutions, pharmaceuticals, artificial, and human urine samples. It is worth noting that the additions of mannitol and lactose, which are the stabilizers of the pharmaceuticals, exhibited an interfering effect on the sensor response. Full article

Cisplatin, which kills cancer cells mainly through DNA crosslinking, has been widely used as a first-line chemotherapeutic agent although it also causes severe side effects. To improve anticancer outcomes, various types of cisplatin-based nanomedicines have been developed, either through direct incorporation or coordination of cisplatin within nanoparticles (NPs). During the formulation and characterization of cisplatin-loaded NPs, quantitative determination of cisplatin is crucial for both clinically used and newly developed NPs. While NPs facilitate cisplatin delivery, the use of different nanomaterials inevitably complicates its determination and increases the cost of quantification. Currently, there is still a significant demand for an accurate, simple, and cost-effective method to determine cisplatin in NPs, which would facilitate the screening and quality control of cisplatin-based nanomedicines. This review aims to discuss the main strategies for quantifying cisplatin, following a summary of the main types of cisplatin-loaded NPs. Application examples of cisplatin determination in NPs are provided, and the key features of each quantification strategy are compared. In addition, NP-based electrochemical sensors are included as an emerging approach for characterizing cisplatin loaded in NPs. Rational selection of an appropriate cisplatin determination method for NPs according to the quantification principle and specific drug-delivery settings is highly recommended. Full article

Brain aging is a complex process regulated by genetic, environmental, and metabolic factors, and increasing evidence suggests that environmental pollutants can significantly accelerate this process by interfering with oxidative stress, neuroinflammation, and mitochondrial function-related signaling pathways. Traditional studies have focused on the direct damage of pollutants on macromolecules (e.g., proteins, DNA), while the central role of senescence-associated small molecules (e.g., ROS, PGE2, lactate) in early regulatory mechanisms has been long neglected. In this study, we innovatively proposed a cascade framework of “small molecule metabolic imbalance-signaling pathway dysregulation-macromolecule collapse”, which reveals that pollutants exacerbate the dynamics of brain aging through activation of NLRP3 inflammatory vesicles and inhibition of HIF-1α. Meanwhile, to address the technical bottleneck of small molecule spatiotemporal dynamics monitoring, this paper systematically reviews the cutting-edge detection tools such as electrochemical sensors, genetically encoded fluorescent probes and antioxidant quantum dots (AQDs). Among them, AQDs show unique advantages in real-time monitoring of ROS fluctuations and intervention of oxidative damage by virtue of their ultra-high specific surface area, controllable surface modification, and free radical scavenging ability. By integrating multimodal detection techniques and mechanism studies, this work provides a new perspective for analyzing pollutant-induced brain aging and lays a methodological foundation for early intervention strategies based on small molecule metabolic networks. Full article

We developed a sensor consisting of V₂O₅ nanorods and a reduced graphene oxide (rGO) nanocomposite (V₂O₅/rGO) with immobilized DNA aptamers (Apt-NH@V₂O₅/rGO) for the sensitive electrochemical detection of Hg (II). The V₂O₅ nanorods anchored on rGO nanosheets were synthesized using a hydrothermal method. The nanocomposite was analyzed by various powerful physical methods that include X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, the Brunauer–Emmett–Teller (BET) method, and Fourier transform infrared spectroscopy (FTIR). The FE-SEM of V₂O₅ disclosed the nanorod-like structure and uniform anchoring of V₂O₅ on the rGO nanosheet. Moreover, the BET results showed that the V₂O₅/rGO nanocomposite possesses excellent porosity. Furthermore, a glassy carbon electrode (GCE) was modified with Apt-NH@V₂O₅/rGO and used for the electrochemical detection of Hg(II) by differential pulse voltammetry (DPV). The aptasensor exhibited excellent sensitivity and selectivity toward Hg(II) detection, with a limit of detection (LOD) of 5.57 nM, which is below the maximum permissible limit established by WHO for rivers (30 nM). The sensor also exhibited significant stability and good repeatability. Full article

Electrochemical biosensors have attracted widespread attention from researchers due to their simple and rapid operation. Recent advancements in nanobiotechnology have further enhanced their performance, with nanomaterials like graphene, carbon nanotubes, and metal nanoparticles being widely used as carriers for immobilizing enzymes, cells, and DNA molecules. These materials improve stability, sensitivity, and selectivity, making biosensors more effective. This article reviews the introduction, principles, and classification of enzyme-based electrode sensors, as well as their research and application progress in the detection of food risk factors (including foodborne pathogens, biotoxins, drug residues, food additives, allergens, etc.). It also explores future prospects, including advancements in nanotechnology and enzyme immobilization techniques, highlighting their potential in food safety and beyond. Full article

Background/Objectives: The CYP2C9 enzyme is involved in the metabolism of warfarin. The CYP2C9 gene harbors several single-nucleotide polymorphisms (SNPs), including CYP2C9*2 (rs1799853), which is known to affect warfarin’s therapeutic response. So, it is important to develop analytical tools capable of genotyping these SNPs to adjust warfarin’s therapeutic outcomes. In this work, an electrochemical DNA-based sensor was constructed and optimized for the detection of the CYP2C9*2 polymorphism. Methods: Using bioinformatic database platforms, two 71 base pair DNA target probes with the polymorphic variants A and G were chosen and designed. A DNA-based sensor was composed by mercaptohexanol and the CYP2C9*2 DNA capture probe in a self-assembled monolayer connected to screen-printed gold electrodes. Two independent hybridization events of the CYP2C9*2 allele were designed using complementary fluorescein-labeled DNA signaling to improve selectivity and avoid secondary structures. Three human samples with the homozygous variant (G/G) and non-variant (A/A) and heterozygous (G/A) genotypes were amplified by PCR and then applied to the developed genosensor. Results: Chronoamperometry measurements were performed for both polymorphic probes. A calibration curve in the 0.25 to 2.50 nM (LOD of 13 pM) and another in the 0.15 to 5.00 nM range (LOD of 22.6 pM) were obtained for the homozygous non-variant and variant probes, respectively. This innovative tool was capable of identifying the hybridization reaction between two complementary strands of immobilized DNA, representing a genotyping alternative to the classical PCR methodology. Conclusions: The developed electrochemical DNA-based sensor was able to discriminate two synthetic SNP target sequences (Target-A and Target-G) and detect, with specificity, the three patients’ genotypes (G/G, G/A, and A/A). This tool is therefore a promising, sensitive, and cost-effective analytical way to determine and discriminate an individual’s genotype and predict the appropriate warfarin dose. Full article

The development of electrochemical DNA biosensors occurred by applying different organically coated Mn-NPs such as MnCO₃@OAm, MnCO₃@TEG and MnO₂/Mn₂O₃@TEG, as well as naked MnCO₃ NPs (where OAm = oleylamine and TEG = tetraethylene glycol). The detection performances of PGEs were modified with different types of Mn-NPs, according to the guanine signal magnitudes obtained after double-stranded DNA (dsDNA) or single-stranded DNA (ssDNA) immobilization at these surfaces. DNA interaction studies were realized using UV-vis, circular dichroism (CD), electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV) techniques. In addition, a 3- to 5.4-fold increase in guanine response in the presence of dsDNA and a 2.3-fold increase in the presence of ssDNA were obtained with the developed biosensor. The increased signals in DNA immobilization at the electrode surfaces modified with Mn-NPs compared to bare PGE clearly show that the modification of Mn-NPs increases the electroactive surface area of the electrode. The detection limit (LOD) of dsDNA was calculated as 7.86 μg·L⁻¹ using the MnO₂/Mn₂O₃@TEG type of the Mn-NP-modified biosensor, while the detection limit of ssDNA was calculated as 3.49 μg·L⁻¹ with the MnCO₃@OAm type Mn-NP-modified biosensor. The proposed sensor was applied to a human DNA sample where the amount of dsDNA extract was found to be 0.62 ± 0.03 mg·L⁻¹ after applying the MnO₂/Mn₂O₃@TEG type of Mn-NP-modified biosensor. Full article

COVID-19 antibody detection is dependent on highly specialized, time-consuming techniques, such as PCR separation, DNA amplification, and other methods such as spectrophotometric absorption. For these reasons, specialized technical training is necessary because individual diagnostic treatment is difficult. We have attempted to perform rapid sensing with a detection time of only 30 s. Additionally, we used a wearable multi-layer graphene oxide nanocolloid synthetic skin tattoo probe assay for influenza and COVID-19 virus detection with an electrochemical antigen–antibody redox ionic titration circuit. Cyclic voltametric−2 V~2.0 V potential windows were used. The diagnostic detection limit was determined using stripping anodic and cathodic amplifiers, and the working probe was fabricated with a graphene molecule structure with a virus antigen-immobilized amplifier. With redox potential strength obtained within −1.0 V~−1.3 V ionic activity, anodic and cathodic current linearly increased in the phosphate-buffered saline 5 mL electrolyte. The results indicate that instant detection was enabled via individual and wearable tattoo sensors. Full article

Biosensing shows promise in detecting cancer, renal disease, and other illnesses. Depending on their transducing processes, varieties of biosensors can be divided into electrochemical, optical, piezoelectric, and thermal biosensors. Advancements in material production techniques, enzyme/protein designing, and immobilization/conjugation approaches can yield novel nanoparticles with further developed functionality. Research in cutting-edge biosensing with multifunctional nanomaterials, and the advancement of practical biochip plans utilizing nano-based sensing material, are of current interest. The miniaturization of electronic devices has enabled the growth of ultracompact, compassionate, rapid, and low-cost sensing technologies. Some sensors can recognize analytes at the molecule, particle, and single biological cell levels. Nanomaterial-based sensors, which can be used for biosensing quickly and precisely, can replace toxic materials in real-time diagnostics. Many metal-based NPs and nanocomposites are favorable for biosensing. Through direct and indirect labeling, metal-oxide NPs are extensively employed in detecting metabolic disorders, such as cancer, diabetes, and kidney-disease biomarkers based on electrochemical, optical, and magnetic readouts. The present review focused on recent developments across multiple biosensing modalities using metal/metal-oxide-based NPs; in particular, we highlighted the specific advancements of biosensing of key nanomaterials like ZnO, CeO₂, and TiO₂ and their applications in disease diagnostics and environmental monitoring. For example, ZnO-based biosensors recognize uric acid, glucose, cholesterol, dopamine, and DNA; TiO₂ is utilized for SARS-CoV-19; and CeO₂ for glucose detection. Full article

Monitoring of immune factors, including interferon-gamma (IFN-γ), holds great importance for understanding immune responses and disease diagnosis. Wearable sensors enable continuous and non-invasive detection of immune markers in sweat, drawing significant attention to their potential in real-time health monitoring and personalized medicine. Among these, electrochemical sensors are particularly advantageous, due to their excellent signal responsiveness, cost-effectiveness, miniaturization, and broad applicability, making them ideal for constructing wearable sweat sensors. In this study, we present a flexible and sensitive wearable platform for the detection of IFN-γ, utilizing a DNA hydrogel with favorable loading performance and sample collection capability, and the application of mobile software achieves immediate data analysis and processing. This platform integrates three-dimensional DNA hydrogel functionalized with IFN-γ-specific aptamers for precise target recognition and efficient sweat collection. Signal amplification is achieved through target-triggered catalytic hairpin assembly (CHA), with DNA hairpins remarkably enhancing sensitivity. Ferrocene-labeled reporting strands immobilized on a screen-printed carbon electrode are displayed via CHA-mediated strand displacement, leading to a measurable reduction in electrical signals. These changes are transmitted to a custom-developed mobile application via a portable electrochemical workstation for real-time data analysis and recording. This wearable sensor platform combines the specificity of DNA aptamers, advanced signal amplification, and the convenience of mobile data processing. It offers a high-sensitivity approach to detecting low-abundance targets in sweat, paving the way for new applications in point-of-care diagnostics and wearable health monitoring. Full article

Rapid, effective, and cost-effective methods for large-scale screening of pesticide residues in the environment and agricultural products are important for assessing potential environmental risks and safeguarding human health. Here, we constructed a novel aggregation-induced emission (AIE) electrochemical aptamer (Apt) sensor based on red-emissive sulfur quantum dots (SQDs), which aimed at the rapid screening and quantitative detection of malathion. SQDs were prepared using a two-step oxidation method with good electrochemiluminescence (ECL) optical properties. These SQDs were modified onto the electrode surface to serve as ECL luminophores. Subsequently, Apt was introduced and modified to form a double-helix structure with the complementary chain (cDNA). The ECL signal was reduced because the biomolecules had poor electrical conductivity and inefficient electron transfer. When the target malathion was added, the double helix structure was unraveled, the malathion Apt fell off the electrode surface, and the ECL signal was restored. The linear range of detection was 1.0 × 10⁻¹³–1.0 × 10⁻⁸ mol·L⁻¹, and the detection limit was 0.219 fM. The successful preparation of the sensor not only develops the ECL optical properties of SQDs but also expands the application of SQDs in ECL sensing. Full article

Since lead can cause severe effects on living organisms’ health and life, the regular monitoring of Pb levels in water and soil is of particular significance. Recently, it was shown that lead ions can also be detected using affinity-based biosensors, namely, using aptamers as recognition elements. In most cases, thrombin binding aptamer (TBA) was utilized; however, there are more examples of DNA aptamers which could also serve that purpose. Herein, we present studies on the electrochemical detection of lead ions using PS2M aptamer, which contains several guanine nucleotides, as the receptor element. Firstly, the method of aptamer-based layer fabrication was optimized along with the choice of a redox active indicator, which was a source of current signal. The experiments revealed the possibility of lead ion detection from 50 to 600 nM, which covers the range below and above the maximum accepted limit stated by US EPA (72 nM). Moreover, the sensing layer exhibited high selectivity towards lead ions and was successfully applied both for the analysis of tap water spiked with Pb²⁺ ions and as a miniaturized sensor. Finally, stability and regeneration studies on the aptamer-based receptor layer were executed to confirm the utility of the elaborated tool. Full article