Search Results (772)

Salmonella is one of the main causes of food-borne illness worldwide. In most cases, Salmonella contamination can be traced back to food processing plants and/or to cross-contamination during food preparation. To avoid food-borne diseases, food processing plants use sanitizers and biocidal to reduce bacterial contaminants below acceptable levels. Despite these preventive actions, Salmonella can survive and consequently affect human health. This study investigates the adaptive capacity of the main Salmonella enterica serotypes isolated from the poultry production line, focusing on their replication, antimicrobial resistance, and biofilm formation under stressors such as acidic conditions, oxidative environment, and high osmolarity. Using growth curve analysis, crystal violet staining, and microscopy, we assessed replication, biofilm formation, and antimicrobial resistance under acidic, oxidative, and osmotic stress conditions. Disinfectant tolerance was evaluated by determining the Minimum Inhibitory Concentration (MIC) and Minimum Bactericidal Concentration (MBC) of sodium hypochlorite. The antibiotic resistance was assessed using the Kirby–Bauer method. The results indicate that, in general, acidic and osmotic stress reduce the growth of Salmonella. However, no significant differences were observed specifically for serotypes Infantis, Heidelberg, and Corvallis. The S. Infantis isolates were the strongest biofilm producers and showed the highest prevalence of multidrug resistance (71%). Interestingly, S. Infantis forming biofilms required up to 8-fold higher concentrations of sodium hypochlorite for eradication. Furthermore, osmotic and oxidative stress significantly induced biofilm production in industrial S. Infantis isolates compared to a reference strain. Understanding how Salmonella responds to industrial stressors is vital for designing strategies to control the proliferation of these highly adapted, multi-resistant pathogens. Full article

Biosecurity measures applied on poultry farms, with a recent history of highly pathogenic avian influenza virus infection, were monitored using 24 h/7 days-per-week video monitoring. Definition of biosecurity breaches were based on internationally acknowledged norms. Farms of four different production types (two broiler, two layer, two breeder broiler, and one duck farm) were selected. Observations of entry to and exit from the anteroom revealed a high degree of biosecurity breaches in six poultry farms and good biosecurity practices in one farm in strictly maintaining the separation between clean and potentially contaminated areas in the anteroom. Hand washing with soap and water and/or using disinfectant lotion was rarely observed at entry to the anteroom and was almost absent at exit. Egg transporters did not disinfect fork-lift wheels when entering the egg-storage room nor change or properly disinfect footwear. The egg-storage room was not cleaned and disinfected after egg transport by the farmer. Similarly, footwear and trolley wheels were not disinfected when introducing young broilers or ducklings to the poultry unit. Biosecurity breaches were observed when introducing bedding material in the duck farm. This study shows a need for an engaging awareness and training campaign for poultry farmers and their co-workers as well as for transporters to promote good biosecurity practices. Full article

The advancement of non-thermal disinfection technologies represents a critical pathway for ensuring food safety, meeting environmental sustainability requirements, and meeting consumer preferences for clean-label products. This study systematically evaluated the combined preservation effect of ultrasonic-assisted slightly acidic electrolyzed water (US+SAEW) on mirror carp fillets during refrigeration. Results demonstrated that US+SAEW exhibited superior antimicrobial efficacy compared to individual US or SAEW, achieving reductions of 0.73, 0.74, and 0.79 log CFU/g in total viable counts (TVC), Aeromonas bacteria, and lactic acid bacteria counts compared to the control, respectively. Furthermore, the combined intervention significantly suppressed microbial proliferation throughout the refrigeration period while simultaneously delaying protein and lipid degradation/oxidation induced by spoilage bacteria, thereby inhibiting the formation of alkaline nitrogenous compounds. Consequently, lower levels of pH, total volatile basic nitrogen (TVB-N), protein carbonyl, and thiobarbituric acid reactive substances (TBARS) were observed in US+SAEW compared to the other treatments. Multimodal characterization through low-field nuclear magnetic resonance (LF-NMR), texture, and color analysis confirmed that US+SAEW effectively preserved quality characteristics, extending the shelf life of mirror carp fillets by four days. This study provides a novel non-thermal preservation strategy that combines microbial safety maintenance with quality retention, offering particular advantages for thermolabile food. Full article

As the primary biological risk threatening safe dairy production, bovine mastitis control highly relies on environmental disinfection measures. However, the mechanisms by which chemical disinfectants influence host–environment microbial interactions remain unclear. This study systematically investigated the disinfection efficacy and regulatory effects on microbial community composition and diversity of glutaraldehyde-benzalkonium chloride (BAC) and glutaraldehyde-didecyl dimethyl ammonium bromide (DAB) at recommended concentrations (2–5%), using 80 environmental samples from intensive dairy farms in Xinjiang, China. Combining 16S rDNA sequencing with culturomics, the results showed that BAC achieved a disinfection rate of 99.33%, higher than DAB’s 97.87%, and reduced the environment–gut microbiota similarity index by 23.7% via a cationic bacteriostatic film effect. Microbiome analysis revealed that BAC selectively suppressed Fusobacteriota abundance (15.67% reduction) and promoted Bifidobacterium proliferation (7.42% increase), enhancing intestinal mucosal barrier function through butyrate metabolism. In contrast, DAB induced Actinobacteria enrichment in the environment (44.71%), inhibiting pathogen colonization via bioantagonism. BAC’s long-acting bacteriostatic properties significantly reduced disinfection costs and mastitis incidence. This study first elucidated the mechanism by which quaternary ammonium compound (QAC) disinfectants regulate host health through “environment-gut” microbial interactions, providing a critical theoretical basis for developing precision disinfection protocols integrating “cost reduction-efficiency enhancement-risk mitigation.” Full article

Brucellosis is caused by Brucella spp.; it can result in fetal loss and abortion, resulting in economic losses and negative effects on human health. Herein, a cross-sectional study on the epidemiology of Brucella spp. in aborted livestock in Ningxia from 2022 to 2023 was conducted. A total of 749 aborted tissue samples from 215 cattle and 534 sheep were collected from farmers who reported abortions that were supported by veterinarians trained in biosecurity. The samples were analyzed using qPCR and were cultured for Brucella spp. when a positive result was obtained; the samples were speciated using AMOS-PCR. MLST and MLVA were employed for genotype identification. The results demonstrated that 8.68% of the samples were identified as being positive for Brucella spp. based on qPCR results. In total, 14 field strains of Brucella spp. were subsequently isolated, resulting in 11 B. melitensis, 2 B. abortus, and 1 B. suis. being identified via AMOS-PCR. Four sequence types were identified via MLST—ST7 and ST8 (B. melitensis), ST2 (B. abortus), and ST14 (B. suis)—with ST8 predominating. Five MLVA-8 genotypes and seven MLVA-11 genotypes were identified, with MLVA-11 GT116 predominating in livestock. Thus, at least three Brucella species are circulating in aborted livestock in Ningxia. This suggests a significant risk of transmission to other animals and humans. Therefore, disinfection and safe treatment procedures for aborted livestock and their products should be carried out to interrupt the transmission pathway; aborted livestock should be examined to determine zoonotic causes and targeted surveillance should be strengthened to improve the early detection of infectious causes, which will be of benefit to the breeding industry and public health security. Full article

Iopamidol (IPM), as a typical recalcitrant emerging pollutant and precursor of iodinated disinfection by-products (I-DBPs), is unsuccessfully removed by conventional wastewater treatment processes. This study comprehensively evaluated the ozone/peracetic acid (O₃/PAA) process for IPM degradation, focusing on degradation kinetics, environmental impacts, transformation products, ecotoxicity, disinfection byproducts (DBPs), and microbial inactivation. The O₃/PAA system synergistically activates PAA via O₃ to generate hydroxyl radicals (^•OH) and organic radicals (CH₃COO^• and CH₃CO(O)O^•), achieving an IPM degradation rate constant of 0.10 min⁻¹, which was significantly higher than individual O₃ or PAA treatments. The degradation efficiency of IPM in the O₃/PAA system exhibited a positive correlation with solution pH, achieving a maximum degradation rate constant of 0.23 min⁻¹ under alkaline conditions (pH 9.0). Furthermore, the process demonstrated strong resistance to interference from coexisting anions, maintaining robust IPM removal efficiency in the presence of common aqueous matrix constituents. Furthermore, quenching experiments revealed ^•OH dominated IPM degradation in O₃/PAA system, while the direct oxidation by O₃ and R-O^• played secondary roles. Additionally, based on transformation products (TPs) identification and ECOSAR predictions, the primary degradation pathways were elucidated and the potential ecotoxicity of TPs was systematically assessed. DBPs analysis after chlorination revealed that the O₃/PAA (2.5:3) system achieved the lowest total DBPs concentration (99.88 μg/L), representing a 71.5% reduction compared to PAA alone. Amongst, dichloroacetamide (DCAM) dominated the DBPs profile, comprising > 60% of total species. Furthermore, the O₃/PAA process achieved rapid 5–6 log reductions of E. coli. and S. aureus within 3 min. These results highlight the dual advantages of O₃/PAA in effective disinfection and byproduct control, supporting its application in sustainable wastewater treatment. Full article

As a result of the catalytic decomposition of H₂O₂, hydroxyl radicals are produced. Hydroxyl radicals are strong oxidants and effectively inactivate bacteria, ensuring water disinfection without toxic chlorinated organic by-products. The kinetics of bacterial inactivation were studied in a laboratory-scale flow catalytic reactor. A granular cobalt ferrite catalyst was thoroughly characterized using XRD and XRF techniques, SEM with EDS, and Raman spectroscopy. At lower H₂O₂ concentrations, H₂O₂ decomposition follows first-order reaction kinetics. At higher H₂O₂ concentrations, the obtained kinetics lines suggest that the reaction order increases. The kinetics of bacterial inactivation in the developed flow reactor depends largely on the initial number of bacteria. The initial bacterial concentrations in laboratory tests were within the range typical of real river water. A regression model was developed that relates the degree of bacterial inactivation to the initial number of bacteria, the initial H₂O₂ concentration, and the contact time of water with the catalyst. Full article

Chemical products, including cleaning agents, disinfectants, stain removers, and cosmetics, release harmful chemicals that pose a risk to human health and the environment, necessitating alternative sources. The objective of this research was to identify the most effective phytoextract from food production waste for use in sustainable aerosol hygiene technology as an electrostatic bio-disinfectant. The investigation was performed through wipe tests and airborne microbial collection techniques. The upgraded coffee silverskin phytoextract demonstrated superior disinfection potential for various surfaces and airborne microbes compared to the hot trub phytoextract, with an industrial disinfectant serving as the control. Log reduction analyses revealed a more significant killing efficacy (p ≤ 0.05, using the ANOVA test) against Gram-positive organisms (Bacillus subtilis and Listeria monocytogenes) than against Gram-negative organisms (Escherichia coli and Vibrio parahaemolyticus), with the log reductions ranging from 3.08 to 5.56 and 3.72 to 5.81, respectively. Chemical characterization by LC-ESI-QTOF-MS, ¹H NMR, and FTIR showed that CGAs and chalcones are the most bioactive compounds in CSS and HT, respectively. The innovation in this work involves an integrated approach that combines waste-derived phytoextracts, advanced chemical profiling, and scalable aerosol disinfection. Furthermore, this research offers a greener, cost-effective, and industrially relevant alternative to synthetic chemical disinfectants. The interdisciplinary approach contributes to the development of bio-based disinfectants for use in the food industry, hospitals, and public health settings. This investigation supports a paradigm shift toward sustainable disinfection practices, thereby improving food and environmental safety. Full article

Trihalomethanes (THMs) are a class of disinfectant by-products present in chlorinated tap water. Mainly due to their carcinogenic potential, their concentration in drinking water is now limited by regulations. In Romania, little is known about their distribution in urban drinking water supply systems, their magnitude, or their seasonal variation. Drinking water suppliers periodically adapt and optimise their water treatment methods for economic reasons and in response to regulatory changes and technological developments. The formation of THMs is influenced by the physicochemical parameters of water (pH, temperature, total organic carbon—TOC) and by environmental factors (geographical, climatological). Most of these factors have significant seasonal variations that lead to the formation of THMs in variable concentrations. In this study, we analysed the seasonal trends in surface water quality (considering variations in temperature, pH, and TOC) and correlated them with the concentration of THMs in drinking water over two calendar years. Water samples were collected from the Arges River, in a geographical area comprised of plains. The results show that the formation of THMs is enhanced by increasing temperature over the course of a year, with the highest concentrations being obtained in July 2022 (98.7 µg/L THMs at 30.5 °C) and in August 2023 (81.9 µg/L THMs at 30.4 °C). The main parameters that trigger the formation of THMs are the organic matter content and the disinfectant dose; the pH has a moderate effect, and its effect is correlated with the concentration of organic matter. There were noted strong seasonal changes in the concentration of THMs, with the maximum peak being in the middle and late summer and the minimum peak being in winter. This indicates the possibility that the quality of drinking water may change as a result of climate change. In addition, monitoring and chlorination experiments have established that the concentration of THMs is directly proportional with the TOC. Full article

Nitrifying bacteria, including ammonia-oxidizing bacteria (AOB) and nitrite-oxidizing bacteria (NOB), are players in the nitrogen cycle but pose serious health risks when colonizing drinking water distribution networks (DWDNs). While the global impact of these bacteria is increasingly recognized, a significant research gap remains concerning their effects in tropical regions, particularly in developing countries. This study aims to bridge that gap by systematically reviewing the existing literature on nitrifying bacteria in DWDNs, their behavior in biofilms, and associated public health risks, particularly in systems reliant on surface water sources in tropical climates. Using the PRISMA guidelines for systematic reviews, 51 relevant studies were selected based on content validity and relevance to the research objective. The findings highlight the critical role of nitrifying bacteria in the formation of nitrogenous disinfection by-products (N-DBPs) and highlight specific challenges faced by developing countries, including insufficient monitoring and low public awareness regarding safe water storage practices. Additionally, this review identifies key surrogate indicators, such as ammonia, nitrite, and nitrate concentrations, that influence the formation of DBPs. Although health risks from nitrifying bacteria are reported in comparable studies, there is a lack of epidemiological data from tropical regions. This underscores the urgent need for localized research, systematic monitoring, and targeted interventions to mitigate the risks associated with nitrifying bacteria in DWDNs. Addressing these challenges is essential for enhancing water safety and supporting sustainable water management in tropical developing countries. Full article

The aim of this study was to elucidate all the degradation byproducts (DBPs) of bemotrizinol (BEMT) that are associated with sodium hypochlorite treatment. BEMT is a UV filter that is found not only in many personal care products, such as sunscreen and cosmetics, but also as an additive in plastics or clothing to protect them from damage that results from absorbed radiation. BEMT has been detected in wastewater, surface water, and some lake sediments, in quantities from a few ng/L to hundreds of ng/L, to such an extent that, today, it is considered an emerging pollutant. In this study, the UV filter was subjected to oxidation with sodium hypochlorite, which is an oxidant at the base of the disinfection process that is used in most wastewater treatment plants or in swimming pools. Using different chromatographic methods (CC, TLC, HPLC, and GC), the resulting DBP mixture was separated into its main components, which were then identified using one- and two-dimensional nuclear magnetic resonance (NMR) spectroscopy and mass spectrometry. Nineteen DBPs were isolated, and a plausible reaction mechanism was proposed to explain how they were obtained. Full article

Multifunctional water-treatment materials urgently need to be developed to avoid normal organic matter, inorganic anions, resistant bacteria, and hazardous disinfection by-products in conventional drinking water treatment strategies. While quaternary ammonium pyridine resins (QAPRs) possess porous adsorption structures and incorporate antibacterial groups, enabling simultaneous water disinfection and purification, their limited bactericidal efficacy hinders broader utilization. Therefore, a deeper understanding of the structure-dependent antimicrobial mechanism in QAPRs is crucial for improving their antibacterial performance. Hexyl (C₆) was proved to be the optimal antibacterial alkyl in the QAPRs. A new antibacterial quaternary ammonium pyridine resin Py-61 was prepared by more surficial bactericidal N⁺ groups and higher efficient antibacterial hexyl, performing with the excellent antibacterial efficiency of 99.995%, far higher than the traditional resin Py-6C (89.53%). The antibacterial resin Py-61 completed the disinfection of sand-filtered water independently to produce safe drinking water, removing the viable bacteria from 3600 to 17 CFU/mL, which meets the drinking water standard of China in GB5749-2022 (<100 CFU/mL). Meanwhile, the contaminants in sand-filtered water were obviously removed by the resin Py-61, including anions and dissolved organic matter (DOM). The resin Py-61 can be regenerated by 15% NaCl solution, and keeps the reused antibacterial efficiency of >99.97%. As an integrated disinfection–purification solution, the novel antibacterial resin presents a promising alternative for enhancing safety in drinking water treatment. Full article

This study focuses on the design and optimization of a monopolar electrode configuration for the hybrid electrochemical treatment of real washing machine wastewater. A combined electrocoagulation (EC) and electro-oxidation (EO) system was optimized to maximize pollutant removal efficiency while minimizing energy consumption. The monopolar setup employed mixed metal oxide (MMO) and aluminum anodes, along with a stainless steel cathode, operating under controlled conditions with sodium chloride as the supporting electrolyte. An applied current density of 15 mA cm⁻² achieved 90% chemical oxygen demand (COD) removal, 98% surfactant degradation, complete turbidity reduction within 120 min, and pH stabilization near 8. Additionally, electrochemical disinfection achieved <2 MPN/100 mL, with no detectable phenols and the presence of organic anions such as oxalate and acetate. These results demonstrate the effectiveness of an optimized monopolar EC–EO system as a cost-efficient and sustainable strategy for wastewater treatment and potential water reuse. Further studies should focus on refining energy consumption and monitoring reaction by-products to enhance large-scale applicability. Full article

A total of 1.6 million tons of personal protective equipment (PPE) waste has been generated daily since 2019 and this production has not abated since that time. Within PPEs, isolation gowns make up the largest percentage by weight of landfill waste. This study aimed to evaluate the effectiveness of rapid, reproducible disinfection protocols to help facilitate safe reuse and minimize risks from microbial contamination. Disinfection of isolation gowns via fogging with hydrogen peroxide (HP) and hypochlorous acid (HC) were evaluated in the present study compared to standard ethylene oxide (EO) sterilization. This study was conducted at VCA West Coast Specialty and Emergency Animal Hospital in the United States. Ten isolation gowns (control) were cultured on tryptic soy agar contact plates in 10 predetermined areas to determine microbial load and morphology/types on non-sterile gowns before use. Following this, 10 gowns were fogged with 12% HP, and then once drying was complete, they were cultured in the predetermined areas for microbial load and morphology/types. This procedure was repeated with another set of 10 gowns fogged with 500 ppm HC. Lastly, 10 gowns were sterilized with EO using standard protocol and cultures were performed similarly. Median CFU (colony-forming unit) counts at 48 h for control, EO, HP, and HC were 4.5, 0, 0, and 0; at 72 h, they were 107, 0, 0, and 0, respectively. No significant difference was noted between the disinfection groups; post hoc pairwise analysis showed that the CFU counts for the disinfection groups were significantly lower than those for the control. The median percent reduction at 48 h for EO, HP, and HC was 100, 100, and 100; at 72 h, it was 100, 100, and 100, respectively. No significant difference was detected among the groups. The median number of microbe types for control, EO, HP, and HC was 2.5, 0, 0, and 0; there was no difference between the disinfection groups, but the number of microbe types was significantly higher for the control than for the disinfection groups. EO is environmentally toxic, expensive, and carcinogenic; it requires prolonged disinfection cycle times, expensive equipment, and trained personnel. This study suggests that HP and HC provide a cost-effective, relatively nontoxic, environmentally safe, and comparatively short disinfection time option for the disinfection and reuse of isolation gowns that does not require trained personnel or specialized equipment. Full article

This study investigates the formation and toxicity of disinfection by-products (DBPs) arising from the reactions between individual reactive chlorine species (RCS) and dissolved organic matter (DOM) during water treatment. Individual chlorine radicals (Cl^•) and dichloride radicals (Cl₂^•−) were selectively generated with a laser flash photolysis technique, and their interactions with Suwannee River natural organic matter (SRNOM) were analyzed. Results demonstrated a biphasic pattern of DBP formation, where initial increases in RCS exposure enhanced DBP concentrations and toxicities, followed by subsequent decreases at higher RCS exposure. Variations among DBP classes, including trichloromethanes, chloroacetic acids, and chloroacetaldehydes, highlighted the complexity of RCS-DOM interactions. Toxicity assessments further indicated chloroacetonitriles and chloroacetic acids as major toxicity contributors at varying RCS exposures. This study highlights the impact of RCS exposure levels to DBP formation and toxicities, providing mechanistic insights for optimizing parameters in RCS-mediated advanced oxidation processes (AOPs) for safer water treatment. Full article