Search Results (1,153)

The upper reaches of the Yangtze River face the challenge of balancing livestock development and ecological protection. As a significant livestock production region in China, optimizing the livestock ecological efficiency (LEE) of Sichuan Province (SP) is of strategic importance for regional sustainable development. Livestock carbon emissions and related pollution indices were utilized as undesirable output indicators within the super-efficiency SBM model to measure SP’s LEE over the 2010–2022 period. Kernel density estimation was combined with the Theil index to analyze spatiotemporal variation characteristics. A STIRPAT model was constructed to explore the influencing factors of SP’s LEE, and a grey forecasting GM (1,1) model was employed for prediction. Key findings reveal the following: (1) LEE increased by 25.9%, with high-efficiency regions expanding from 19.0% to 57.1%; (2) regional disparities persist, driven by labor redundancy and environmental governance gaps; (3) per capita GDP, industrial agglomeration, and technology advancement significantly promoted efficiency, while government subsidies and carbon intensity suppressed it. Projections show LEE reaching 0.923 by 2035. Key recommendations include the following: (1) implementing region-specific strategies for resource optimization, (2) restructuring agricultural subsidies to incentivize emission reduction, and (3) promoting cross-regional technology diffusion. These provide actionable pathways for sustainable livestock management in ecologically fragile zones. Full article

This study advances the understanding of atmospheric microplastic (MPs) exposure across urban (US), suburban (SS), and rural (RS) areas of Madrid, Spain, for the first time. Air pollution from MPs remains an understudied issue with broad implications for environmental and human health. Recent evidence highlights the need for multipoint studies to accurately establish atmospheric exposure to MPs, especially during winter seasons in the city. To address this issue, this work conducted active sampling of ≤10 μm aerosol particles, following EN 12341:2014 standards, during the 2024–2025 winter season. A quantitative innovative method using UV-assisted optical microscopy was applied to assess daily MPs exposure. To trace the potential sources and transport pathways, air mass back trajectories were modelled using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) software. The results showed an average exposure (n = 4) of 80 ± 20; 55 ± 9 and 46 ± 20 MPs·m⁻³·day⁻¹ during the sampling period in US, SS, and RS, respectively; and an average exposure (n = 4) of 61 ± 11 MPs·m⁻³·day⁻¹ throughout the winter period between November and December 2024 and January and February 2025. The polymers detected as constituents of MPs were polystyrene, polyethylene, polymethyl methacrylate, and polyethylene terephthalate, achieving a correct identification ratio of 100% for the detected microplastic particles. The HYSPLIT results showed diffuse sources of MPs, especially local, regional, and oceanic sources, in the US. In contrast, microplastic contributions in SS and RS areas originated from local or regional sources, highlighting the need for advanced studies to identify the sources of emissions and transport routes that converge in the occurrence of microplastics in the areas studied. These results demonstrate the atmospheric exposure to microplastics in the city, justifying the need for specialized studies to define the health impacts associated with the inhalation of these emerging pollutants. The findings of this research provide clear evidence of exposure to atmospheric microplastics in urban, suburban, and rural environments in Madrid, suggesting the need for further specialized research to rigorously assess the potential risks to human health associated with microplastic inhalation by the city’s population. Full article

South Dongting Lake is an essential aquatic ecosystem that receives substantial water inflows from the Xiangjiang and Zishui Rivers. However, it is significantly impacted by human activities, including mining, smelting, and farming. These activities have led to serious contamination of the lake’s sediments with heavy metals (HMs). This study investigated the distribution, mobility, and influencing factors of HMs at the sediment–water interface. To this end, sediment samples were analyzed from three key regions (Xiangjiang River estuary, Zishui River estuary, and northeastern South Dongting Lake) using traditional sampling methods and Diffusive Gradients in Thin Films (DGT) technology. Analysis of fifteen HMs (Pb, Bi, Ni, As, Se, Cd, Sb, Mn, Zn, V, Cr, Cu, Tl, Co, and Fe) revealed significant spatial heterogeneity. The results showed that Cr, Cu, Pb, Bi, Ni, As, Se, Cd, Sb, Mn, Zn, and Fe exhibited high variability (CV > 0.20), whereas V, Tl, and Co demonstrated stable concentrations (CV < 0.20). Concentrations were found to exceed background values of the upper continental crust of eastern China (UCC), Yangtze River sediments (YZ), and Dongting Lake sediments (DT), particularly at the Xiangjiang estuary (XE) and in the northeastern regions. Speciation analysis revealed that V, Cr, Cu, Ni, and As were predominantly found in the residual fraction (F4), while Pb and Co were concentrated in the oxidizable fraction (F3), Mn and Zn appeared primarily in the exchangeable fractions (F1 and F2), and Cd was notably dominant in the exchangeable fraction (F1), suggesting a high potential for mobility. Additionally, DGT results confirmed a significant potential for the release of Pb, Zn, and Cd. Contamination assessment using the Pollution Load Index (PLI) and Geoaccumulation Index (Igeo) identified Pb, Bi, Ni, As, Se, Cd, and Sb as major pollutants. Among these, Bi and Cd were found to pose the highest risks. Furthermore, the Risk Assessment Code (RAC) and the Potential Ecological Risk Index (PERI) highlighted Cd as the primary ecological risk contributor, especially in the XE. The study identified sediment grain size, pH, electrical conductivity, and nutrient levels as the primary influencing factors. The PMF modeling revealed HM sources as mixed smelting/natural inputs, agricultural activities, natural weathering, and mining/smelting operations, suggesting that remediation should prioritize Cd control in the XE with emphasis on external inputs. Full article

Emerging and persistent contaminants (EPCs) were detected at high concentrations in Chiang Mai’s Mae Kha Canal, identifying urban waterways as important sources of pollution in the Ping River system in northern Thailand. Maximum levels of metformin (20,000 ng/L), fexofenadine (15,900 ng/L), gabapentin (12,300 ng/L), sucralose (38,000 ng/L), and acesulfame (23,000 ng/L) point to inadequately treated wastewater as a plausible contributor. Downstream enrichment patterns relative to upstream sites highlight the cumulative impact of urban runoff. Five compounds—acesulfame, gemfibrozil, fexofenadine, TBEP, and caffeine—consistently emerged as reliable tracers of urban wastewater, forming a distinct chemical fingerprint of the riverine exposome. Median EPC concentrations were highest in Mae Kha, lower in other urban canals, and declined with distance from the city, reflecting spatial gradients in urban density and pollution intensity. Although most detected concentrations fell below predicted no-effect thresholds, ibuprofen frequently approached or exceeded ecotoxicological benchmarks and may represent a compound of ecological concern. Non-targeted analysis revealed a broader “chemical cocktail” of unregulated substances—illustrating a witches’ brew of pollution that likely escapes standard monitoring efforts. These findings demonstrate the utility of wide-scope surveillance for identifying key compounds, contamination hotspots, and spatial gradients in mixed-use watersheds. They also highlight the need for integrated, long-term monitoring strategies that address diffuse, compound mixtures to safeguard freshwater ecosystems in rapidly urbanizing regions. Full article

Ultrahigh resolution fine particulate matter (PM_2.5) mass concentration remote sensing products are crucial for atmospheric environmental monitoring, pollution source verification, health exposure risk assessment, and other fine-scale applications in urban environments. This study developed an ultrahigh resolution retrieval algorithm to estimate 30 m resolution PM_2.5 mass concentrations over urban areas from Landsat-8 and Sentinel-2A/B satellite measurements. The algorithm utilized aerosol optical depth (AOD) products retrieved from the Landsat-8 OLI and Sentinel-2 MSI measurements from 2017 to 2020, combined with multi-source auxiliary data to establish a PM_2.5-AOD relationship model across China. The results showed an overall high coefficient of determination (R²) of 0.82 and 0.76 for the model training accuracy based on samples and stations, respectively. The model prediction accuracy in Beijing and Wuhan reached R² values of 0.86 and 0.85. Applications in both cities demonstrated that ultrahigh resolution PM_2.5 has significant advantages in resolving fine-scale spatial patterns of urban air pollution and pinpointing pollution hotspots. Furthermore, an analysis of point source pollution at a typical heavy pollution emission enterprise confirmed that ultrahigh spatial resolution PM_2.5 can accurately identify the diffusion trend of point source pollution, providing fundamental data support for refined monitoring of urban air pollution and air pollution prevention and control. Full article

The dual environmental challenges of karst areas lie in organic solid waste’s (OSW) massive generation scale and diffuse dispersion, which accelerate bedrock exposure and soil contamination, while simultaneously representing an underutilized resource for soil amendments through optimized composting. Bio-enhanced composting of multi-source OSW yields compounds with dual redox/adsorption capabilities, effectively improving soil quality and restoring ecological balance. The recycling and circular utilization of OSW resources become particularly critical in karst regions with vulnerable soil ecosystems, where sustainable resource management is urgently needed to maintain ecological balance. This review elucidates the ecological impacts of multi-source OSW compost applications on soil environments in ecologically fragile karst regions, specifically elucidating the mechanisms of heavy metals (HMs) migration–transformation and organic contaminant degradation (with emphasis on emerging pollutants), and the functional role of microbial carbon pumps in these processes. Furthermore, establishing a sustainable “multi-source OSW−compost−organic matter (adsorption and redox sites)−microorganisms−pollution remediation” cycle creates a green, low-carbon microenvironment for long-term soil remediation. Finally, this study evaluates the application prospects of the refined composting technology utilizing multi-objective regulation for OSW resource recycling and utilization in karst areas. This review provides critical insights for optimizing soil remediation strategies in karst ecosystems through organic waste valorization. Full article

Various nature-based solutions (NbS)—such as constructed wetlands, drainage ditches, and vegetated buffer strips—have recently demonstrated strong potential for mitigating pollutant transport in open channels and river systems. Numerical modeling is a widely adopted and effective approach for assessing the performance of these interventions. This study presents the first development of a two-dimensional (2D) meshless advection–diffusion model based on an Eulerian smoothed particle hydrodynamics (SPH) framework, specifically designed to simulate passive pollutant transport in open channel flows. The proposed model marks a pioneering application of the ESPH technique to environmental pollutant transport problems. It couples the 2D depth-averaged shallow water equations with an advection–diffusion equation to represent both fluid motion and pollutant concentration dynamics. A uniform particle arrangement ensures that each fluid particle interacts symmetrically with eight neighboring particles for flux computation. To represent the pollutant transport process, the dispersion coefficient is defined as the sum of molecular and turbulent diffusion components. The turbulent diffusion coefficient is calculated using a prescribed turbulent Schmidt number and the eddy viscosity obtained from a Smagorinsky-type mixing-length turbulence model. Three analytical case studies, including one-dimensional transcritical open channel flow, 2D isotropic and anisotropic diffusion in still water, and advection–diffusion in a 2D uniform flow, are employed to verify the model’s accuracy and convergence. The model demonstrates first-order convergence, with relative root mean square errors (RRMSEs) of approximately 0.2% for water depth and velocity, and 0.1–0.5% for concentration. Additionally, the model is applied to a laboratory experiment involving 2D pollutant dispersion in a 90° junction channel. The simulated results show good agreement with measured velocity and concentration distributions. These findings indicate that the developed model is a reliable and effective tool for evaluating the performance of NbS in mitigating pollutant transport in open channels and river systems. Full article

Retired chemically polluted sites in southern Jiangsu Province, China, are characterized by dense nonaqueous phase liquids (DNAPLs) and extremely thick aquifers (>30 m), which pose substantial challenges for determining investigation and remediation depths during redevelopment and exploitation. This study constructed a 2D groundwater transport model using TMVOC to systematically investigate the migration, diffusion, and natural attenuation processes of two typical DNAPLs—1,2-dichloroethane (DCE) and carbon tetrachloride (CTC)—under three scenarios: individual transport, mixed transport, and heterogeneous aquifer conditions, with a simulation period of 35 years. In individual transport scenarios, DCE and CTC showed distinct migration behaviors. DCE achieved a maximum vertical transport distance of 14.01 m and a downstream migration distance of 459.58 m, while CTC reached 13.57 m vertically and 453.51 m downstream. When transported as a mixture, their migration was inhibited: DCE’s vertical and downstream distances decreased to 13.76 m and 440.46 m, respectively; and CTC’s to 13.23 m and 420.32 m, likely due to mutual solvent effects that altered their physicochemical properties such as viscosity and solubility. Under natural attenuation conditions, both DNAPLs ceased downstream transport by the end of the 6th year. DCE concentrations dropped below its risk control value (0.81 mg/L) by the 14th year, and CTC (with a risk control value of 0.23 mg/L) by the 11th year. By the 10th year, DCE’s downstream plume had retreated to 48.65 m, and CTC’s to 0.95 m. In heterogeneous aquifers, vertical upward transport of DCE and CTC increased to 14.82 m and 14.22 m, respectively, due to the partial absence of low-conductivity silt layers, while their downstream distances decreased to 397.99 m and 354.11 m, constrained by low-permeability lenses in the migration path. These quantitative results clarify the dynamic differences in DNAPL transport under varying conditions, highlighting the impacts of multicomponent interactions, natural attenuation, and aquifer heterogeneity. They provide critical references for risk management, scientific determination of remediation depths, and safe exploitation of retired chemically polluted sites with similar hydrogeological characteristics. Full article

Chromium slag sites pose severe environmental risks due to hexavalent chromium (Cr(VI)) contamination, characterized by high mobility and toxicity. This study focused on chromium-contaminated soil from a historical chromium slag site in North China, where long-term accumulation of chromate production residues has led to serious Cr(VI) pollution, with Cr(VI) accounting for 13–22% of total chromium and far exceeding national soil risk control standards. To elucidate Cr(VI) transformation mechanisms and elemental linkages, a combined approach of macro-scale condition experiments and micro-scale analysis was employed. Results showed that acidic conditions (pH < 7) significantly enhanced Cr(VI) reduction efficiency by promoting the conversion of CrO₄²⁻ to HCrO₄⁻/Cr₂O₇²⁻. Among reducing agents, FeSO₄ exhibited the strongest effect (reduction efficiency >30%), followed by citric acid and fulvic acid. Temperature variations (−20 °C to 30 °C) had minimal impact on Cr(VI) transformation in the 45-day experiment, while soil moisture (20–25%) indirectly facilitated Cr(VI) reduction by enhancing the reduction of agent diffusion and microbial activity, though its effect was weaker than chemical interventions. Soil grain-size composition influenced Cr(VI) distribution unevenly: larger particles (>0.2 mm) in BC-35 and BC-36-4 acted as main Cr(VI) reservoirs due to accumulated Fe-Mn oxides, whereas BC-36-3 showed increased Cr(VI) in smaller particles (<0.074 mm). μ-XRF and correlation analysis revealed strong positive correlations between Cr and Ca, Fe, Mn, Ni (Pearson coefficient > 0.7, p < 0.01), attributed to adsorption–reduction coupling on iron-manganese oxide surfaces. In contrast, Cr showed weak correlations with Mg, Al, Si, and K. This study clarifies the complex factors governing Cr(VI) behavior in chromium slag soils, providing a scientific basis for remediation strategies such as pH adjustment (4–6) combined with FeSO₄ addition to enhance Cr(VI) reduction efficiency. Full article

Meloidogyne enterolobii, a highly virulent and broad-host-range plant-parasitic nematode, poses an increasing threat to global agricultural production. By inducing the formation of nutrient-rich giant cells in host roots and deploying a diverse array of effector proteins to modulate plant immune responses, this nematode achieves efficient colonization and invasion, resulting in impaired crop growth and significant economic losses. In recent years, global climate warming combined with the rapid development of protected agriculture has broken the traditional geographical limits of tropical and subtropical regions, thereby increasing the risk of M. enterolobii occurrence in temperate and high-latitude areas. Concurrently, conventional chemical control methods are increasingly limited by environmental pollution and the development of resistance, steering research toward green control strategies. This review systematically summarizes the latest research progress of M. enterolobii in terms of ecological diffusion trends, pathogenic mechanisms, and green control, and explored the feasibility of integrating multidisciplinary technologies to construct an efficient and precise control system. The ultimate aim is to provide theoretical support and technical supports for green and sustainable development of global agriculture. Full article

Nanomaterials possess unique physicochemical properties that position them as promising candidates for environmental remediation, particularly in the removal of persistent organic pollutants (POPs) from aqueous systems. Their high surface area, tunable functionality, and strong adsorption capabilities have attracted significant attention. In this context, this paper reviews the mechanisms of nanomaterial-based POP decontamination, also providing a critical overview of the limitations and challenges in applying these methods. Specifically, issues of stability, reusability, and aggregation are discussed, which can lead to performance decay during repeated use. In addition, the practical application requires nanocomposites to enable efficient separation and mitigate agglomeration. Environmental concerns also arise from nanomaterials’ fate, transport, and potential toxicity, which may impact aquatic ecosystems and non-target organisms. When checking for large-scale application feasibility, impurities typically add to production costs, recovery problems, and general infrastructure limitations. In addition to these points, there are no standard guidelines or clear risk assessment procedures for registering a product. Unprecedented cross-disciplinary research between natural, human, and technological studies and outreach programs is needed to facilitate the development and diffusion of the results. The barriers will eventually be breached to move from laboratory success in developing the desperately needed new water purification technologies to field-ready water treatment solutions that can address the global POP contamination problem. Full article

We surveyed the air quality conditions in 18 homes with gas stoves for PM_2.5, CO₂, NO₂ and CO using calibrated low-cost sensors. In each home, participants were asked to cook as usual, but to record their cooking activities and mitigation efforts (windows, ventilation fans, etc.). All homes showed enhanced pollutants during, and immediately after, times of cooking or stove use. For each home, we quantified the minutes per day and minutes per minute of cooking over known health thresholds for each pollutant. On average, homes exhibited 38 min per day over one or more of these thresholds, with PM_2.5 and NO₂ being the pollutants of greatest concern. Six homes had much higher occurrences over the health thresholds, averaging 73 min per day. We found an average of 1.0 min over one or more of the health thresholds per minute of cooking when no mitigation was used, whereas when mitigation was used (filtration or vent fan), this value was reduced by 34%. We further investigated several mitigation methods including natural diffusion, a commercial HEPA filter unit, a commercial O₃ scrubber and a ventilation fan. We found that the HEPA unit was highly effective for PM_2.5 but had no impact on any of the gaseous pollutants. The O₃ scrubber was moderately effective for NO₂ but had little impact on the other pollutants. The ventilation fan was highly effective for all pollutants and reduced the average pollutant lifetime significantly. Under controlled test conditions, the pollutant lifetime (or time to reach 37% of the original concentration), was reduced from an average of 45 min (with no ventilation) to 7 min. While no commercial filter showed efficacy for both PM_2.5 and NO₂, the fact that each could be removed individually suggests that a combined filter for both pollutants could be developed, which would significantly reduce health impacts in homes with gas stoves. Full article

Turbulent diffusion plays a critical role in atmospheric pollutant dispersion, particularly in complex environments such as urban areas. This study proposes a novel theoretical approach to enhance the calculation of the turbulent diffusion coefficient in pollutant dispersion models. We propose a new expression for the turbulent diffusion coefficient (KC), which incorporates both hydrodynamic and turbulence-related time scales. This formulation links the turbulent diffusion coefficient to pollutant travel time and turbulence intensity, offering more accurate predictions of pollutant concentration distributions. By addressing the limitations of existing empirical models, this approach improves the parameterization of turbulence and reduces uncertainties in predicting maximum individual exposure under various atmospheric conditions. The study presents a theoretical model designed to advance the current understanding of atmospheric dispersion modeling. Experimental validation, while recommended, is beyond the scope of this work and is suggested as a direction for future empirical research to confirm the practical utility of the model. This theoretical formulation could be integrated into urban air quality management frameworks, providing improved estimations of pollutant peaks in complex environments. Full article

The transition toward a circular water economy addresses accelerating water scarcity and pollution. A PRISMA-2020 systematic review of 50 peer-reviewed articles (January 2018–April 2024) mapped current technologies and management strategies, seeking patterns, barriers, and critical bottlenecks. Bibliometric analysis revealed the following three dominant patterns: (i) rapid diffusion of membrane bioreactors, constructed wetlands, and advanced oxidation processes; (ii) research geographically concentrated in Asia and the European Union; (iii) industry’s marked preference for by-product valorization. Key barriers—high energy costs, fragmented regulatory frameworks, and low social acceptance—converge as critical constraints during scale-up. The following three practical action lines emerge: (1) adopt progressive tariffs and targeted tax credits that internalize environmental externalities; (2) harmonize water-reuse regulations with comparable circularity metrics; (3) create multi-actor platforms that co-design projects, boosting local legitimacy. These findings provide policymakers and water-sector practitioners with a clear roadmap for accelerating Sustainable Development Goals 6, 9, and 12 through circular, inclusive, low-carbon water systems. Full article

In recent years, the traditional orchard sprayer has had problems, such as waste of liquid agrochemicals, low target coverage, high manual dependence, and environmental pollution. In this study, an automatic swing-arm sprayer for orchards was developed based on the standardized pear orchard in Pinggu, Beijing. Firstly, the structural principles of a crawler-type traveling system and swing-arm sprayer were simulated using finite element software design. The combination of a diffuse reflection photoelectric sensor and Arduino single-chip microcomputer was used to realize real-time detection and dynamic spray control in the pear canopy, and the sensor delay compensation algorithm was used to optimize target recognition accuracy and improve the utilization rate of liquid agrochemicals. Through the integration of innovative structural design and intelligent control technology, a vertical droplet distribution test was carried out, and the optimal working distance of the spray was determined to be 1 m; the nozzle angle for the upper layer was 45°, that for the lower layer was 15°, and the optimal speed of the swing-arm motor was 75 r/min. Finally, a particle size test and field test of the orchard sprayer were completed, and it was concluded that the swing-arm mode increased the pear tree canopy droplet coverage by 74%, the overall droplet density by 21.4%, and the deposition amount by 23% compared with the non-swing-arm mode, which verified the practicability and reliability of the swing-arm spray and achieved the goal of on-demand pesticide application in pear orchards. Full article