Search Results (10)

Field surveys focused on detailed mapping and measurements of coseismic surface ruptures along the causative fault of the 6 February 2023, Mw 7.8 Kahramanmaraş earthquake. The aim was filling gaps in the previously available surface-faulting trace, validating the accuracy of data obtained from remote sensing, refining fault offset estimates, and gaining a deeper understanding of both the local and overall patterns of the main rupture strands. Measurements and observations confirm dominating sinistral strike-slip movement. An integrated and comprehensive slip distribution curve shows peaks reaching over 700 cm, highlighting the near-fault expressing up to 70% of the deep net offset. In general, the slip distribution curve shows a strong correlation with the larger north-eastern deformation of the geodetic far field dislocation field and major deep slip patches. The overall rupture trace is generally straight and narrow with significant geometric complexities at a local scale. This results in transtensional and transpressional secondary structures, as multi-strand positive and negative tectonic flowers, hosting different patterns of the mole-tracks at the outcrop scale. The comprehensive and detailed field survey allowed characterizing the structural framework and geometric complexity of the surface faulting, ensuring accurate offset measurements and the reliable interpretation of both morphological and geometric features. Full article

In this study, hybrid composite materials were fabricated using a Scalmalloy^® matrix with fixed multi-walled carbon nanotube (MWCNT, 0.8%) content and varying titanium carbide (TiC; 5%, 10%, 15%) reinforcements via the hot-pressing method. Unlike conventional approaches in the literature that utilize additive manufacturing, this research presents the first successful production of Scalmalloy^®-based hybrid composites through a traditional powder metallurgy method. This method enabled the development of a more homogeneous and equiaxed microstructure. The composites were characterized using SEM, EDS, MAP, and XRD analyses, along with density and microhardness measurements. Mechanical performance was evaluated through Vickers hardness and transverse rupture strength (TRS) tests, while dry sliding wear behavior was examined in detail. The hardness of the 15% TiC + 0.8% MWCNT-reinforced composite increased from 87 HV to 181 HV (a 108% improvement), and TRS increased from 354 MPa to 545 MPa (a 54% improvement). Additionally, wear surface examinations showed that as the reinforcement ratio increased, the severity of surface damage decreased and abrasive wear mechanisms became more dominant. These findings demonstrate that hybrid reinforcement with TiC and MWCNT significantly enhances both mechanical and tribological performance, offering a promising alternative to additive manufacturing for Scalmalloy^®-based composite production. Full article

The eastern segment of the Sunan-Qilian Fault (ES-SQF) is located within the seismic gap between the 1927 M8.0 Gulang earthquake and the 1932 M7.6 Changma earthquake in China. It also aligns with the extension direction of the largest surface rupture zone associated with the 2022 Mw6.7 Menyuan earthquake. Understanding the activity parameters of this fault is essential for interpreting strain distribution patterns in the central–western segment of the Qilian–Haiyuan fault zone, located along the northeastern margin of the Tibetan Plateau, and for evaluating the seismic hazards in the region. High-resolution Google Earth satellite imagery and UAV (Unmanned Aerial Vehicle)-based photogrammetry provide favorable conditions for detailed mapping and the study of typical landforms along the ES-SQF. Combined with field geological surveys, the ES-SQF is identified as a continuous, singular-fault structure extending approximately 68 km in length. The fault trends in the WNW direction and along its trace, distinctive features, such as ridges, gullies, and terraces, show clear evidence of synchronous left lateral displacement. This study investigates the Qingsha River and the Dongzhong River. High-resolution digital elevation models (DEMs) derived from UAV imagery were used to conduct a detailed mapping of faulted landforms. An analysis of stripping trench profiles and radiocarbon dating of collected samples indicates that the most recent surface-rupturing seismic event in the area occurred between 3500 and 2328 y BP, pointing to the existence of an active fault from the Holocene epoch. Using the LaDiCaoz program to restore and measure displaced terraces at the study site, combined with geomorphological sample collection and testing, we estimated the fault’s slip rate since the Holocene to be approximately 2.0 ± 0.3 mm/y. Therefore, the ES-SQF plays a critical role in strain distribution across the central–western segment of the Qilian–Haiyuan fault zone. Together with the Tuolaishan fault, it accommodates and dissipates the left lateral shear deformation in this region. Based on the slip rate and the elapsed time since the last event, it is estimated that a seismic moment equivalent to Mw 7.5 has been accumulated on the ES-SQF. Additionally, with the significant Coulomb stress loading on the ES-SQF caused by the 2016 Mw 5.9 and 2022 Mw 6.7 Menyuan earthquakes, there is a potential for large earthquakes to occur in the future. Our results also indicate that high-resolution remote sensing imagery can facilitate detailed studies of active tectonics. Full article

The 1980 Ms 6.9 Irpinia earthquake was responsible for the activation or reactivation of numerous gravitative deformations mainly hosted by clayey lithotypes, affecting wide areas of Benevento Province and the Sele and Ofanto R. Valleys. The case of Calitri offers valuable insights into a methodological approach to studying mass movements affecting human settlements. Post-earthquake investigations in Calitri involved extensive geognostic boreholes and in situ surveys, providing substantial data for lithological characterization and landslide modeling. Additionally, over the past two decades, satellite-based techniques have supported the mapping and characterization of ground deformations in this area, improving our understanding of spatiotemporal evolution. Despite these efforts, a detailed subsurface comprehensionof the tectono-stratigraphy and geometriesof gravity-induced deformation remains incomplete. This study aims to enhance our knowledge of gravity-driven deformations affecting urban areas by using deep-penetrating GroundPenetrating Radar (GPR) surveys to identify landslide-related structures, rupture surfaces, and lithological characterization of the involved lithotypes. The integration of GPR surveys with classical morphotectonic analysis led to the delineation of the main subsurface discontinuities (stratigraphy, tectonics, and gravity-related), correlating them with available geognostic data. This approach provided non-invasive, detailed insights into subsurface features and stands out as one of the rare case studies in Italy that employed the GPR method for landslide investigations. Full article

Geometric complexities play an important role in the nucleation, propagation, and termination of strike-slip earthquake ruptures. The 2021 Mw7.4 Maduo earthquake rupture initiated at a large releasing stepover with a complex fault intersection. In the epicentral region, we conducted detailed mapping and classification of the surface ruptures and slip measurements associated with the earthquake, combining high-resolution uncrewed aerial vehicle (UAV) images and optical image correlation with field investigations. Our findings indicate that the coseismic ruptures present discontinuous patterns mixed with numerous lateral spreadings due to strong ground shaking. The discontinuous surface ruptures are uncharacteristic in slip to account for the large and clear displacements of offset landforms in the epicentral region. Within the releasing stepovers, the deformation zone revealed from the optical image correlation map indicates that a fault may cut diagonally across the pull-apart basin at depth. The left-lateral horizontal coseismic displacements from field measurements are typically ≤0.6 m, significantly lower than the 1–2.7 m measured from the optical image correlation map. Such a discrepancy indicates a significant proportion of off-fault deformation or the possibility that the rupture stopped at a shallow depth during its initiation phase instead of extending to the surface. The fault network and multi-fault junctions west and south of the epicenter suggest a possible complex path, which retarded the westward propagation at the initial phase of rupture growth. A hampered initiation might enhance the seismic ground motion and the complex ground deformation features at the surface, including widespread shaking-related fissures. Full article

Various researchers have contributed to the literature on the locations and lengths of existing faults in the Eskişehir Basin, Turkey. However, the majority of the literature on the subject bases its results on fault indications observed on the surface, for example, surface ruptures. In addition, studies using geophysical methods in order to reveal buried faults have also fallen short regarding depth compared to gravity. In order to have a better understanding, the gravity method was applied with a total of 448 gravity measurements on five parallel lines in the north–south direction of the study area, which also includes the urban area of the Eskişehir Basin. Considering the neotectonics of the Eskişehir basin, the measurement lines were chosen to perpendicularly cut the east–west extending faults of the Eskişehir fault zone. For the first time in the literature, a detailed Bouguer gravity anomaly map has been obtained for the Eskişehir Basin using land gravity measurements. The edge detection Horizontal Gradient Magnitude (HGM) and Euler Deconvolution (ED) methods were applied to obtained Bouguer anomaly data. Both of these use spatial analysis of Bouguer gravity anomalies. An HGM map shows the presence of maximum amplitude areas in the south and north of the study, and these areas were found to be compatible with the known faults in the literature. ED solutions also support HGM maximums. The relationship between the lineaments obtained from the edge detections and the seismicity of the region were examined. It can be seen that the results obtained from both the HGM and ED edge detection methods are highly compatible with each other, and highly related to the structural geology of the region. Although great agreement with the faults in the literature was determined by both methods, only the ED method showed a number of newly found faults in the area. In addition, the locations of the known faults in the region were supported by the geo-physical gravity method for the first time. Full article

The 2021 M_w 7.3 Maduo earthquake is one of the largest seismic events that has occurred in and around the Bayan Har block of Tibet. D-InSAR results and field surveys indicate that this earthquake resulted in more than 160 km of coseismic surface rupture along pre-existing fault traces. Based on the branching of the surface rupture, the fault of the Maduo earthquake can be roughly divided into four sections. Through detailed drone mapping, the fracture pattern and offset of the fault were counted and measured. The development of the peaty meadow layer on the ground determines the different combination modes of the fractures. The horizontal offset observed on the surface of this earthquake is generally less than 2 m and the vertical offset is less than 1 m, and the fault shows a primarily left-lateral strike-slip movement. In the desert-covered areas, there are long gaps between continuous rupture. Full article

The M_L 5.8 earthquake that hit the island of Crete on 27 September 2021 is analysed with InSAR (Interferometry from Synthetic Aperture Radar) and GNSS (Global Navigation Satellite System) data. The purpose of this work is to create a model with sufficient detail for the geophysical processes that take place in several kilometres below the earth’s surface and improve our ability to observe active tectonic processes using geodetic and seismic data. InSAR coseismic displacements maps show negative values along the LOS of ~18 cm for the ascending orbit and ~20 cm for the descending one. Similarly, the GNSS data of three permanent stations were used in PPK (Post Processing Kinematic) mode to (i) estimate the coseismic shifts, highlighting the same range of values as the InSAR, (ii) model the deformation of the ground associated with the main shock, and (iii) validate InSAR results by combining GNSS and InSAR data. This allowed us to constrain the geometric characteristics of the seismogenic fault and the slip distribution on it. Our model, which stands on a joint inversion of the InSAR and GNSS data, highlights a major rupture surface striking 214°, dipping 50° NW and extending at depth from 2.5 km down to 12 km. The kinematics is almost dip-slip normal (rake −106°), while a maximum slip of ~1.0 m occurred at a depth of ca. 6 km. The crucial though indirect role of inherited tectonic structures affecting the seismogenic crustal volume is also discussed suggesting their influence on the surrounding stress field and their capacity to dynamically merge distinct fault segments. Full article

A magnitude (Mw) 7.4 Maduo earthquake occurred on 22 May 2021 in the northern Qinghai-Tibet Plateau, with predominantly left-lateral strike-slip faulting and a component of normal faulting within the Bayan Har Block. The co-seismic surface rupture extended in a NWW direction for ~160 km with a complicated geometry along a poorly known young fault: the Jiangcuo Fault. The main surface rupture propagated bilaterally from the epicenter and terminated eastward in horsetail splays. The main rupture can be divided into five segments with two rupture gaps. Field surveys and detailed mapping revealed that the co-seismic surface ruptures were characterized by a series of left-lateral offsets, en echelon tensional cracks and fissures, compressional mole tracks, and widespread sand liquefication. The observed co-seismic left-lateral displacements ranged from 0.2 m to ~2.6 m, while the vertical displacements ranged from 0.1 m to ~1.5 m, much lower than the InSAR inverse slip maximum of 2–6 m. Based on the comprehensive analysis of the causative fault geometry and the tectonic structure of the northern Bayan Har Block, this study suggests that the multiple NWW trending sub-faults, including the Jiangcuo Fault, developed from the East Kunlun fault northeast of the Bayan Har Block could be regarded as the sub-faults of the East Kunlun Fault system, constituting a broad and dispersive northern boundary of the Block, controlling the inner strain distribution and deformation. Full article

The Arkalochori village in central Crete was hit by a large earthquake (M_w = 6.0) on 27 September 2021, causing casualties, injuries, and severe damage to the infrastructure. Due to the absence of apparent surface rupture and the initial focal mechanism solution of the seismic event, we initiated complementary, multi-disciplinary research by combining seismological and remote sensing data processing, followed by extensive field validation. Detailed geological mapping, fault surface measuring accompanied with tectonic analysis, fault photorealistic model creation by unmanned aerial system data processing, post-seismic surface deformation analysis by DInSAR image interpretation coupled with accurately relocated epicenters recorded by locally established seismographs have been carried out. The combination of the results obtained from these techniques led to the determination of the contemporary tectonic stress regime that caused the earthquake in central Crete, which was found compatible with extensional processes parallel to the Hellenic arc. Full article