Search Results (1,390)

Nonlinear wind-induced vibrations and coupled static–dynamic instabilities pose significant challenges for long-span suspension bridges, especially under large-amplitude and high-angle-of-attack conditions. However, existing studies have yet to fully capture the mechanisms behind large-amplitude torsional flutter. To address this, wind tunnel experiments were performed on H-shaped bluff sections and closed box girders using a high-precision five-component piezoelectric balance combined with a custom support system. Complementing these experiments, a finite element time-domain simulation framework was developed, incorporating experimentally derived nonlinear flutter derivatives. Validation was achieved through aeroelastic testing of a 1:110-scale model of the original Tacoma Narrows Bridge and corresponding numerical simulations. The results revealed Hopf bifurcation phenomena in H-shaped bluff sections, indicated by amplitude-dependent flutter derivatives and equivalent damping coefficients. The simulation results showed less than a 10% deviation from experimental and historical wind speed–amplitude data, confirming the model’s accuracy. Failure analysis identified suspenders as the critical failure components in the Tacoma collapse. This work develops a comprehensive performance-based design framework that improves the safety, robustness, and resilience of long-span suspension bridges against complex nonlinear aerodynamic effects while enabling cost-effective, targeted reinforcement strategies to advance modern bridge engineering. Full article

Supply chains are increasingly exposed to sudden disruptive events (SDEs) such as natural disasters and trade wars. We develop a multi-stage game-theoretical model to investigate a novel coping mechanism: when a firm is forced to exit the market because of SDEs, the firm can regain profits by licensing its proprietary production tech to a competitor. We find that, compared with the scenario before SDEs, such events can even increase the profit of each manufacturer under certain conditions. Under certain conditions, the cooperative strategy (i.e., supply chain reshaping) yields a higher supply chain system profit than the non-cooperative strategy. After SDEs, the common manufacturer may either accept or reject cooperation, depending on the customer transfer rate and the cooperation cost. Notably, under the cooperation strategy, the high-tech manufacturer extracts part of the common manufacturer’s profit through patent licensing, and the existence of cooperation cost further contributes to a misalignment between the common manufacturer’s optimal decision and the supply chain system optimum. These findings contribute to the literature by identifying a novel supply chain reshaping mechanism driven by patent licensing and offer strategic guidance for firms and policymakers navigating SDE-induced market exits. Full article

Tactile pavings (Tenji Blocks) are prone to wear, obstruction, and improper installation, posing significant safety risks for visually impaired pedestrians. This system incorporates a lightweight YOLOv8 (You Only Look Once version 8) model for real-time detection using a fisheye camera to maximize field-of-view coverage, which is highly advantageous for low-altitude UAV navigation in complex urban settings. To enable lightweight deployment, a novel Lightweight Shared Detail Enhanced Oriented Bounding Box (LSDE-OBB) head module is proposed. The design rationale of LSDE-OBB leverages the consistent structural patterns of tactile pavements, enabling parameter sharing within the detection head as an effective optimization strategy without significant accuracy compromise. The feature extraction module is further optimized using StarBlock to reduce computational complexity and model size. Integrated Contextual Anchor Attention (CAA) captures long-range spatial dependencies and refines critical feature representations, achieving an optimal speed–precision balance. The framework demonstrates a 25.13% parameter reduction (2.308 M vs. 3.083 M), 46.29% lower GFLOPs, and achieves 11.97% ${\mathrm{mAP}}_{50:95}$ on tactile paving datasets, enabling real-time edge deployment. Validated through public/custom datasets and actual UAV flights, the system realizes robust tactile paving detection and stable navigation in complex urban environments via hierarchical control algorithms for dynamic trajectory planning and obstacle avoidance, providing an efficient and scalable platform for automated infrastructure inspection. Full article

This study investigated the effects of color shade and curing time on the degree of conversion (DC) and microhardness of colored compomers. A total of 162 samples (81 for DC, 81 for microhardness) were prepared, with nine samples per color group (gold, blackberry, green, pink, orange, lemon, blue, silver) and for the control. Samples were subdivided into three polymerization subgroups (3 s/3200 mW/cm², 10 s/1000 mW/cm², 20 s/1000 mW/cm²). The DC was analyzed via fourier transform infrared spectroscopy (FTIR) and microhardness was measured using Vickers testing. Statistical analysis included two-way ANOVA and Spearman correlation (α = 0.05). The colored compomers demonstrated a significantly lower DC compared to the control group (p ≤ 0.001). Among the tested colors, green exhibited the lowest DC (33.3%), while orange showed the highest (51.0%). A significant difference in DC was observed across curing times (p = 0.005), with the 3 s and 20 s groups exhibiting significantly higher conversion rates than the 10 s group. Microhardness values exhibited significant variation depending on the color (p < 0.001). Gold compomers demonstrated the lowest microhardness, whereas silver compomers showed comparable performance with the control group (p = 0.154). A moderate correlation between DC and microhardness was observed overall (ρ = 0.42, p = 0.003). However, the observed relationships were color-dependent: orange displayed a strong positive correlation (ρ = 0.78), whereas pink revealed no meaningful association (ρ = −0.15). Color and curing time critically influence compomer performance. High-intensity short curing is viable for lighter colors, while darker colors require extended curing. Customized protocols are essential to optimize clinical outcomes in pediatric dentistry. Full article

Free-space optical (FSO) communications have emerged as a promising complement to conventional radio-frequency (RF) systems due to their high bandwidth, low interference, and license-free spectrum. Visible-light FSO communication, using laser diodes or LEDs, offers potential for short-range data links, but performance is highly wavelength-dependent under varying atmospheric conditions. This study presents an experimental evaluation of three visible laser diodes at 650 nm (red), 532 nm (green), and 405 nm (violet), focusing on their optical output power, quantum efficiency, and modulation behavior across a range of driving currents and frequencies. A custom laboratory testbed was developed using an Atmega328p microcontroller and a Visual Basic control interface, allowing precise control of current and modulation frequency. A silicon photovoltaic cell was employed as the optical receiver and energy harvester. The results demonstrate that the 650 nm red laser consistently delivers the highest quantum efficiency and optical output, with stable performance across electrical and modulation parameters. These findings support the selection of 650 nm as the most energy-efficient and versatile wavelength for short-range, cost-effective visible-light FSO communication. This work provides experimentally grounded insights to guide wavelength selection in the development of energy-efficient optical wireless systems. Full article

This study describes and validates a novel method for assessing anterior crystalline lens curvature along vertical and horizontal meridians using radial measurements derived from Scheimpflug imaging. The aim was to evaluate whether pupil diameter (PD), anterior lens curvature, and anterior chamber depth (ACD) change during accommodation and whether these changes are age-dependent. A cross-sectional study was conducted on 104 right eyes from healthy participants aged 21–62 years. Sixteen radial images per eye were acquired using the Galilei Dual Scheimpflug Placido Disk Topographer under four accommodative demands (0, 1, 3, and 5 dioptres (D)). Custom software analysed lens curvature by calculating eccentricity in both meridians. Participants were analysed as a total group and by age subgroups. Accommodative amplitude and monocular accommodative facility were inversely correlated with age. Both PD and ACD significantly decreased with higher accommodative demands and age. Relative eccentricity decreased under accommodation, indicating increased lens curvature, especially in younger participants. Significant curvature changes were detected in the horizontal meridian only, although no statistically significant differences between meridians were found overall. The vertical meridian showed slightly higher eccentricity values, suggesting that it remained less curved. By enabling detailed, meridionally stratified in vivo assessment of anterior lens curvature, this novel method provides a valuable non-invasive approach for characterizing age-related biomechanical changes during accommodation. The resulting insights enhance our understanding of presbyopia progression, particularly regarding the spatial remodelling of the anterior lens surface. Full article

Economic growth, especially in emerging economies, has altered the composition of international tourism. It is therefore essential to possess the skills necessary to understand the influence of culture on human behaviour, thereby enabling an appropriate response to the traveller. This research aims to develop a tool for identifying openness, flexibility, awareness, and intercultural preparedness. It focuses on the metacognitive and cognitive aspects of cultural intelligence that shape the development of empathy in customer service staff in hotels in Quintana Roo. The variables were validated and incorporated into a quantitative study using multivariate analysis and inferential statistics. A sample of 77 questionnaires was analysed using simple random sampling under a proportional design. Multiple Correspondence Analysis (MCA) was employed as a discriminatory technique to identify the most significant independent variables. These were subsequently entered as regressors into ordinal logistic regression (OLR), along with age and work experience, in order to estimate the probabilities associated with each level of the dependent variable. The results indicated that age had minimal influence on the metacognitive and cognitive variables, whereas years of experience among tourism staff exerted a significant effect. Full article

The operational and indoor environmental quality of buildings has a significant impact on global energy consumption and human quality of life. One of the key directions for improving building performance is the optimization of building control systems. In modern buildings, the presence of numerous actuators and monitoring points makes manually designed control algorithms potentially suboptimal due to the complexity and human factors. To address this challenge, model predictive control based on artificial neural networks can be employed. The advantage of this approach lies in the model’s ability to learn and understand the dynamic behavior of the building from monitoring datasets. It should be noted that the effectiveness of such control models is directly dependent on the forecasting accuracy of the neural networks. In this study, we adapt neural network architectures such as GRU and TCN for use in the context of building model predictive control. Furthermore, we propose a novel hybrid architecture that combines the strengths of recurrent and convolutional neural networks. These architectures were compared using real monitoring data collected with a custom-developed device introduced in this work. The results indicate that, under the given experimental conditions, the proposed hybrid architecture outperforms both GRU and TCN models, particularly when processing large sequential input vectors. Full article

This paper deals with a standard cell-based analog-in-concept pW-power building block as a comparator and a wake-up oscillator. Both topologies, traditionally conceived as an analog building block made by a custom process and supply voltage-dependent design flow, are designed only by using digital gates, enabling them to be automated and fully synthesizable. This further results in supply voltage scalability and regulator-less operation, allowing direct powering by an energy harvester without additional ancillary circuit blocks (such as current and voltage sources). In particular, the circuit similarities in implementing a rail-to-rail dynamic voltage comparator and a relaxation oscillator using only digital gates are discussed. The building blocks previously reported in the literature by the author will be described, and the common root of their design will be highlighted. Full article

Depending on the feedstock type and the pyrolysis conditions, biochars exhibit different physical, chemical, and structural properties, which highly influence their performance in various applications. This study presents a comprehensive characterization of biochar materials derived from the waste wood of pine (Pinus sylvestris L.) and beech (Fagus sylvatica) after low-temperature pyrolysis at 270 °C, followed by chemical activation using zinc chloride. The resulting materials were thoroughly analyzed in terms of their chemical composition (FTIR), thermal behavior (TGA/DTG), structural morphology (SEM and XRD), elemental analysis, and particle size distribution. The successful modification of raw biomass into carbon-rich structures of increased aromaticity and thermal stability was confirmed. Particle size analysis revealed that the activated carbon of Fagus sylvatica (FSAC) exhibited a monomodal distribution, indicating high homogeneity, whereas Pinus sylvestris-activated carbon showed a distinct bimodal distribution. This heterogeneity was supported by elemental analysis, revealing a higher inorganic content in pine-activated carbon, likely contributing to its dimensional instability during activation. These findings suggest that the uniform morphology of beech-activated carbon may be advantageous in filtration and adsorption applications, while pine-activated carbon’s heterogeneous structure could be beneficial for multifunctional systems requiring variable pore architectures. Overall, this study underscored the potential of chemically activated biochar from lignocellulosic residues for customized applications in environmental and material science domains. Full article

Renewable energy sources are being progressively incorporated into modern power grids to increase sustainability, stability, and resilience. To ensure that residential, commercial, and industrial customers have a dependable and efficient power supply, the transmission system must deliver electricity to end-users via the distribution network. To improve the performance of the distribution system, this study employs distributed generator (DG) units and focuses on determining their optimal placement, sizing, and power factor. A novel metaheuristic algorithm, referred to as Rüppell’s fox optimizer (RFO), is proposed to address this optimization problem under various scenarios. In the first scenario, where the DG operates at unity power factor, it is modeled as a photovoltaic system. In the second and third scenarios, the DG is modeled as a wind turbine system with fixed and optimal power factors, respectively. The performance of the proposed RFO algorithm is benchmarked against five well-known metaheuristic techniques to validate its effectiveness and competitiveness. Simulations are conducted on the IEEE 33-bus and IEEE 69-bus radial distribution test systems to demonstrate the applicability and robustness of the proposed approach. Full article

Foreign Object Debris (FOD) detection is paramount for airport operations. The precise identification and removal of FOD are critical for ensuring airplane flight safety. This study collected FOD images using optical imaging sensors installed at Urumqi Airport and created a custom FOD dataset based on these images. To address the challenges of small targets and complex backgrounds in the dataset, this paper proposes optimizations and improvements based on the advanced detection network Dab-Deformable. First, this paper introduces a Lightweight Deep-Shallow Feature Fusion algorithm (LDSFF), which integrates a hotspot sensing network and a spatial mapping enhancer aimed at focusing the model on significant regions. Second, we devise a Multi-Directional Deformable Channel Attention (MDDCA) module for rational feature weight allocation. Furthermore, a feedback mechanism is incorporated into the encoder structure, enhancing the model’s capacity to capture complex dependencies within sequential data. Additionally, when combined with a Threshold Selection (TS) algorithm, the model effectively mitigates the distraction caused by the serialization of multi-layer feature maps in the Transformer architecture. Experimental results on the optical small FOD dataset show that the proposed network achieves a robust performance and improved accuracy in FOD detection. Full article

Estimating heterogeneous treatment effects (HTEs) across multiple correlated outcomes poses significant challenges due to complex dependency structures and diverse data types. In this study, we propose a novel deep learning framework integrating empirical copula transformations with a CNN-LSTM (Convolutional Neural Networks and Long Short-Term Memory networks) architecture to capture nonlinear dependencies and temporal dynamics in multivariate treatment effect estimation. The empirical copula transformation, a rank-based nonparametric approach, preprocesses input covariates to better represent the underlying joint distributions before modeling. We compare this method with a baseline CNN-LSTM model lacking copula preprocessing and a nonparametric tree-based approach, the Causal Forest, grounded in generalized random forests for HTE estimation. Our framework accommodates continuous, count, and censored survival outcomes simultaneously through a multitask learning setup with customized loss functions, including Cox partial likelihood for survival data. We evaluate model performance under varying treatment perturbation rates via extensive simulation studies, demonstrating that the Empirical Copula CNN-LSTM achieves superior accuracy and robustness in average treatment effect (ATE) and conditional average treatment effect (CATE) estimation. These results highlight the potential of copula-based deep learning models for causal inference in complex multivariate settings, offering valuable insights for personalized treatment strategies. Full article

The adoption of artificial intelligence (AI) in marketing and social media is gaining scholarly interest. While AI technologies offer significant potential for enhancing customer engagement (CE), their effectiveness depends on an industry’s level of digital and AI readiness. This is especially relevant for people-centric sectors such as tourism and hospitality, where digital maturity remains relatively low. This study aims to understand how AI supports CE and social media marketing (SMM), and to identify the key antecedents and consequences of its use. Using the PRISMA approach, we conduct a systematic review of 55 peer-reviewed empirical studies on AI-based CE and SMM. Our analysis identifies the main contributing theories and AI technologies in the field, and uncovers four central themes: (1) AI in customer service and user experience design, (2) AI-based customer relationships with brands, (3) AI-driven development of customer trust, and (4) cultural differences and varying levels of AI readiness. We also develop a conceptual framework that outlines the determinants and outcomes of AI-based CE, including relevant moderators and mediators. The study concludes with directions for future research and provides theoretical and managerial implications, particularly for the tourism and hospitality industries. Full article

Automated parcel lockers (APLs) are transforming urban last-mile delivery by reducing failed distributions, decoupling delivery from recipient availability, optimizing carrier routes, reducing carbon foot-print and mitigating traffic congestion. The paper investigates the optimal design of APLs systems under stochastic demand and operational constraints, formulating the problem as a resource allocation optimization with service-level guarantees. We proposed a data-driven discrete-event simulation (DES) model implemented in ARENA to (i) determine optimal locker configurations that ensure customer satisfaction under stochastic parcel arrivals and dwell times, (ii) examine utilization patterns and spatial allocation to enhance system operational efficiency, and (iii) characterize inventory dynamics of undelivered parcels and evaluate system resilience. The results show that the configuration of locker types significantly influences the system’s ability to maintain high customers service levels. While flexibility in locker allocation helps manage excess demand in some configurations, it may also create resource competition among parcel types. The heterogeneity of locker utilization gradients underscores that optimal APLs configurations must balance locker units with their size-dependent functional interdependencies. The Dickey–Fuller GLS test further validates that postponed parcels exhibit stationary inventory dynamics, ensuring scalability for logistics operators. As a theoretical contribution, the paper demonstrates how DES combined with time-series econometrics can address APLs capacity planning in city logistics. For practitioners, the study provides a decision-support framework for locker sizing, emphasizing cost–service trade-offs. Full article