Search Results (1,126)

This study evaluates biogas production through the anaerobic digestion of food waste (FW), cow dung (CD), and green waste (GW), with the primary objective of determining the efficacy of co-digesting these organic wastes commonly generated by households and small farms in Central Queensland, Australia. The investigation focuses on both experimental and technoeconomic aspects to support the development of accessible and sustainable energy solutions. A batch anaerobic digestion process was employed using a 1 L jacketed glass digester, simulating small-scale conditions, while technoeconomic feasibility was projected onto a 500 L digester operated without temperature control, reflecting realistic constraints for decentralized rural or residential systems. Three feedstock mixtures (100% FW, 50:50 FW:CD, and 50:25:25 FW:CD:GW) were tested to determine their impact on biogas yield and methane concentration. Experiments were conducted over 14 days, during which biogas production and methane content were monitored. The results showed that FW alone produced the highest biogas volume, but with a low methane concentration of 25%. Co-digestion with CD and GW enhanced methane quality, achieving a methane yield of 48% while stabilizing the digestion process. A technoeconomic analysis was conducted based on the experimental results to estimate the viability of a 500 L biodigester for small-scale use. The evaluation considered costs, benefits, and financial metrics, including Net Present Value (NPV), Internal Rate of Return (IRR), and Dynamic Payback Period (DPP). The biodigester demonstrated strong economic potential, with an NPV of AUD 2834, an IRR of 13.5%, and a payback period of 3.2 years. This study highlights the significance of optimizing feedstock composition and integrating economic assessments with experimental findings to support the adoption of biogas systems as a sustainable energy solution for small-scale, off-grid, or rural applications. Full article

The multi-branch horizontal well for coalbed methane (CBM) is a core technical means to achieve efficient CBM extraction, and its productivity is jointly restricted by geological and engineering factors. To accurately grasp the main controlling factors of the productivity of multi-branch horizontal wells and provide a scientific basis for the optimized design of CBM development, this study takes Well W1 in the Wenjiaba Coal Mine of the Zhina Coalfield in Guizhou, China, as an engineering example and comprehensively uses three-dimensional geological modeling and reservoir numerical simulation methods to systematically explore the key influencing factors of the productivity of multi-branch horizontal wells for CBM. This study shows that coal seam thickness, permeability, gas content, and branch borehole size are positively correlated with the productivity of multi-branch horizontal wells. With the simulation time set to 1500 days, when the coal seam thickness increases from 1.5 m to 4 m, the cumulative gas production increases by 166%; when the permeability increases from 0.2 mD to 0.8 mD, the cumulative gas production increases by 123%; when the coal seam gas content increases from 8 m³/t to 18 m³/t, the cumulative gas production increases by 543%; and when the wellbore size increases from 114.3 mm to 177.8 mm, the cumulative gas production increases by 8%. However, the impact of branch angle and spacing on productivity exhibits complex nonlinear trends: when the branch angle is in the range of 15–30°, the cumulative gas production shows an upward trend during the simulation period, while in the range of 30–75°, the cumulative gas production decreases during the simulation period; the cumulative gas production with branch spacing of 100 m and 150 m is significantly higher than that with spacing of 50 m and 200 m. Quantitative analysis through sensitivity coefficients reveals that the coal seam gas content is the most important geological influencing factor, with a sensitivity coefficient of 2.5952; a branch angle of 30° and a branch spacing of 100 m are the optimal engineering conditions for improving productivity, with sensitivity coefficients of 0.2875 and 0.273, respectively. The research results clarify the action mechanism of geological and engineering factors on the productivity of multi-branch horizontal wells for CBM, providing a theoretical basis for the optimized deployment of well locations, wellbore structure, and drilling trajectory design of multi-branch horizontal wells for CBM in areas with similar geological conditions. Full article

The anaerobic co-digestion of agricultural residues emerges as a promising strategy for energy recovery and nutrient recycling within circular agricultural systems. This study aimed to optimize co-digestion parameters for vinegar residue (VR) and cattle manure (CM) using an orthogonal experimental design. Three key variables were investigated which are the co-substrate ratio (VR to CM), feedstock-to-inoculum (F/I) ratio, and total solids (TS) content. Nine experimental combinations were tested to evaluate methane yield, feedstock degradation, and digestate characteristics. Results showed that the optimal condition for methane yield comprised a 2:3 co-substrate ratio, 1:2 F/I ratio, and 20% TS, achieving the highest methane yield of 267.84 mL/g volatile solids (VS) and a vs. degradation rate of 58.65%. Digestate analysis indicated this condition generated the most nutrient-rich liquid digestate and solid digestate, featuring elevated N, P, and K concentrations, acceptable seed germination indices (GI), and moderate humification levels. While total nutrient content did not meet commercial organic fertilizer standards, the digestate is suitable for direct land application in rural settings. This study underscores the need to balance energy recovery and fertilizer quality in anaerobic co-digestion systems, providing practical guidance for decentralized biogas plants seeking to integrate waste treatment with agricultural productivity. Full article

Given the increasing volume of selectively collected bio-waste and the requirement to increase waste treatment system energy efficiency, dry anaerobic digestion (DAD) represents a more sustainable choice for the treatment of municipal organic fraction instead of conventional technologies. The current paper provides an overview of the existing knowledge on DAD of green waste or kitchen waste collected selectively. Key substrates characteristics (chemical composition, methane potential), novel reactor design and process conditions relevant to effective digestion at elevated dry matter content are considered. Of special interest is the process intensification techniques, impact of contamination and co-fermentation opportunity with other biodegradable wastes. This article also discusses energy and economic performance of DAD plants and puts their environmental burden in perspective versus other bio-waste treatment processes. The current legislation and DAD’s role in the circular economy are also considered. Selectively collected biowaste has significant energy potential and dry anaerobic digestion is an effective technology, especially in areas with limited water availability, offering both waste volume reduction and minimized energy losses. The aim of this work is to introduce the potential of this technology as a sustainable option within the context of renewable energy and modern waste management. Full article

Clarifying the phase evolution history of hydrocarbon fluids helps formulate exploration and development strategies. The discovery of the Xinguang Gas Field marks a significant breakthrough in the Western Junggar Basin. However, the phase evolution history of this gas field remains unclear, which hinders the formulation of subsequent exploration strategies. This study employs a comprehensive approach, combining organic geochemistry, fluid inclusions, basin modeling, and PVT testing and simulation, to investigate the characteristics and phase behavior of deep-seated hydrocarbon fluids in this gas field. It also examines the charging history, compositional evolution, and temperature and pressure histories of the reservoir, thereby clarifying the phase transition process of hydrocarbon fluids in the Xinguang Gas Field. This study finds that the deep-seated reservoir fluids in the Jiamuhe Formation (Fm.) of the Xinguang Gas Field exhibit low densities of 0.77 to 0.83 g/cm³, high gas-to-oil ratios (GORs) of 1014.41 to 13,054.77 m³/m³, high methane contents of 91.16% to 92.74%, and retrograde condensation characteristics. Additionally, the reservoir temperature and pressure exceed the critical point and the saturation pressure at reservoir temperature, indicating a supercritical condensate gas phase. The present condensate gas in the Xinguang Gas Field is a mixed hydrocarbon from two charging events. Initially, during the Middle–Late Triassic period, both Block 1 and the Xinguang Gas Field were charged with mature oil. Later, from the Late Cretaceous to Early Neogene periods, a secondary charging of highly mature oil and gas occurred in the Xinguang Gas Field, while the reservoir in Block 1 remained largely unchanged. In the co-evolution of reservoir fluid composition, temperature, and pressure, the phase transitions of the hydrocarbon fluids in the Xinguang Gas Field passed through several stages, including liquid black oil (231.9–80.3 Ma), liquid volatile oil (80.3–79.1 Ma), vapor–liquid two-phase volatile oil (79.1–78.3 Ma), vapor–liquid two-phase condensate gas (78.3–69.1 Ma), and supercritical condensate gas (69.1 Ma–present). Full article

This study investigates the impact of environmental changes induced by systematic manipulation of flooding depth and breeding density on greenhouse gas emissions in the field-based giant rice–fish hybrid farming model. Compared with traditional agricultural practices, increasing cultured density in giant rice–fish co-cultivation significantly alleviated the adverse consequences of flooding on soil nutrient dynamics, microbial activity community structure, and greenhouse gas emissions. Relative to the traditional alternating wet and dry irrigation, the soil concentrations of ammonium, total nitrogen, and phosphate significantly increased. Cultured fish had significantly increased soil microbial biomass carbon, nitrogen, and phosphorus contents and improved soil β-glucosidase and aryl-sulfatase activates relative to flooding alone. Cultured fish increased the relative abundances of Actinobacteria, Nitrospirae, Planctomycetes, Verrucomicrobia, and Aminicenantes. An increasing cultured fish density reduced cumulative methane and nitrous oxide emissions and GWP (global warming potential). Relative to the continuous flooding throughout the growing period, cumulative methane emissions and GWP in the flooding with high-density cultured fish were reduced by 5.32% and 1.48%, respectively. Notably, this co-cultivation strategy has the potential to transform traditional practices for sustainable agriculture. Nevertheless, it is imperative to remain vigilant about the potential consequences of greenhouse gas emissions associated with these innovative practices. Continuous monitoring and refinement are essential to ensure the long-term sustainability and viability of this agricultural approach. Full article

The nanoporous structure of coal is crucial for the occurrence and development of coalbed methane (CBM). This study, leveraging the combined characterization of atomic force microscopy (AFM) and Gwyddion software (v2.62), investigated six anthracite samples with varying degrees of metamorphism (R_o = 2.11–3.36%). It revealed the intrinsic relationships between their nanoporous structures, surface morphologies, fractal characteristics, and coalification processes. The research found that as R_o increases, the surface relief of coal decreases significantly, with pore structures evolving from being macropore-dominated to micropore-enriched, and the surface tending towards smoothness. Surface roughness parameters (R_a, R_q) exhibit a negative correlation with R_o. Quantitative data indicate that area porosity, pore count, and shape factor positively correlate with metamorphic grade, while mean pore diameter negatively correlates with it. The fractal dimensions calculated using the variance partition method, cube-counting method, triangular prism measurement method, and power spectrum method all show nonlinear correlations with R_o, moisture (M_ad), ash content (A_ad), and volatile matter (V_daf). Among these, the fractal dimension obtained by the triangular prism measurement method has the highest correlation with R_o, A_ad, and V_daf, while the variance partition method shows the highest correlation with M_ad. This study clarifies the regulatory mechanisms of coalification on the evolution of nanoporous structures and surface properties, providing a crucial theoretical foundation for the precise evaluation and efficient exploitation strategies of CBM reservoirs. Full article

The dynamic process of water depletion plays a critical role in both surface coalbed methane (CBM) development and underground gas extraction, reshaping water–rock interactions and inducing complex permeability responses. Addressing the limited understanding of the coupling mechanism between heterogeneous pore water evolution and permeability during dynamic processes, this study simulates reservoir transitions across four zones (prospective planning, production preparation, active production, and mining-affected zones) via centrifugal experiments. The results reveal a pronounced scale dependence in pore water distribution. During low-pressure stages (0–0.54 MPa), rapid drainage from fractures and seepage pores leads to a ~12% reduction in total water content. In contrast, high-pressure stages (0.54–3.83 MPa) promote water retention in adsorption pores, with their relative contribution rising to 95.8%, forming a dual-structure of macropore drainage and micropore retention. Multifractal analysis indicates a dual-mode evolution of movable pore space. Under low centrifugal pressure, D₋₁₀ and Δα decrease by approximately 34% and 36%, respectively, reflecting improved connectivity within large-pore networks. At high centrifugal pressure, an ~8% increase in D₀−D₂ suggests that pore-scale heterogeneity in adsorption pores inhibits further seepage. A quantitative coupling model establishes a quadratic relationship between fractal parameters and permeability, illustrating that permeability enhancement results from the combined effects of pore volume expansion and structural homogenization. As water saturation decreases from 1.0 to 0.64, permeability increases by more than 3.5 times. These findings offer theoretical insights into optimizing seepage pathways and improving gas recovery efficiency in dynamically evolving reservoirs. Full article

To evaluate lignite degradation efficiency and the enhancement of biogas production by different microbial treatments, lignite was pre-treated with Streptomyces viridosporus (actinomycete), Phanerochaete chrysosporium (fungus), and Pseudomonas sp. (bacterium), followed by biogasification experiments. Among the three, Phanerochaete chrysosporium exhibited the highest lignite degradation rate. All microbial treatments improved both cumulative biogas yield and methane conversion, with Phanerochaete chrysosporium again demonstrating the most significant enhancement. Ultimate analysis after degradation showed the following consistent trends across all treatments: increases in carbon, hydrogen, and nitrogen contents, and reductions in sulfur and oxygen contents. A linear correlation was observed between the H/C atomic ratio and total biogas yield. Functional group analysis revealed the greatest reductions in key functional groups with Phanerochaete chrysosporium, followed by moderate changes with Pseudomonas and Streptomyces viridosporus. Pore structure characterization indicated that all microorganisms influenced lignite porosity, particularly in mesopore and micropore regions. Increases in pore volume and connectivity were associated with improved biogas production efficiency. Full article

The methane flux in the Dongsha area in the northern South China Sea is relatively high. The results indicate the presence of both shallow and deep gas hydrate reservoirs at the Site DS-W08. The gas hydrate reservoir in this area is mainly composed of fine-grained sediments, and high-saturation gas hydrates are present. The shallow-GHR (8–24 mbsf) exhibits a maximum hydrate saturation of 14% (pore volume). The deep-GHR (below 65 mbsf) shows a maximum hydrate saturation of 33% The suspended sedimentation process on the banks of turbidity currents and the deep-water traction current sedimentation process play potentially important roles in the enrichment of gas hydrates. To investigate the influence of sedimentary processes on gas hydrate accumulation, this study analyzed gas hydrate saturation, sediment grain size, grain compositions, biological components, and geochemical characteristics of hydrate-bearing and adjacent layers at Site DS-W08. Sediment grain size analysis suggests that the studied layer was formed through the interaction of turbidity current-induced overbank suspended deposition and traction current deposition. By comprehensively analyzing the comparison of sediment Sr/Ba ratios and the data of foraminifera and calcareous nannofossils, it is found that the bank deposits and traction current deposits triggered by turbidity currents correspond to glacial periods and interglacial periods, respectively. Analysis of biological components shows that layers with high foraminifera content and traction current-modified sediments are more favorable for gas hydrate accumulation. Hydrate reservoirs are all composed of traction current deposits, and the cap rock rich in foraminifera fossils at the top promotes hydrate formation; while the fine-grained turbidites formed during the turbidite deposition process inhibit hydrate accumulation. This study aims to deepen the understanding of the enrichment mechanism of natural gas hydrates and support the commercial development of fine-grained sediments in the northern South China Sea. Full article

To meet the high standards required for the liquefaction process by the Floating Liquefied Natural Gas System (FLNG), including low power consumption, compact footprint, high safety, resistance to waves, and portability, this paper proposes a novel FLNG liquefaction process which combines the supersonic swirling separation technology with pressurized liquefaction technology. The process is simulated and optimized using Aspen HYSYS V10 software and genetic algorithms. The results indicate that the specific power consumption of this liquefaction process is only 0.208 kWh/m³, with the cooler, expander, and compressor being the main equipment responsible for exergy losses, accounting for 28.85%, 26.48%, and 21.70%, respectively. This liquefaction process is relatively adaptable to changes in feed gas pressure, temperature, and methane content. The specific power consumption slightly increases with the increasing feed gas pressure and temperature, while it exhibits some fluctuations with the increasing methane content. The process requires a low CO₂ removal rate, possesses moisture pretreatment capability, has fewer pieces of equipment, and saves a significant amount of valuable space. It combines low specific power consumption, minimal impact from swaying, and high safety, providing considerable application potential in future offshore natural gas development. Full article

This study addresses gas drainage challenges in the Pingdingshan NO.10 mine JI_15-16 coal seam through coupled COMSOL-FLAC^3D numerical simulations. The research evaluates the effectiveness of a cross-measure borehole drainage system. It analyzes the failure mechanisms of the surrounding rock in both the machine roadway and floor roadway of the 24130 working face under the influence of boreholes. The results demonstrate that extended drainage duration progressively reduces both gas content and pressure within the borehole-affected zone of the coal seam while enhancing the effective permeability of the JI_15-16 coal stratum. The operational system extracted 1,527,357 m³ of methane, achieving a pre-drainage efficiency of 59.18% through cross-measure boreholes. The measured gas content aligns with simulated predictions, though field-recorded gas pressure registered slightly higher than modeled values. This validated drainage design complies with the Pingmei Group’s regulations for coal and gas outburst prevention. Critically, cross-measure boreholes alter stress distribution around both coal and floor roadways, promoting plastic zone expansion. Consequently, during the development of the 24130 working face’s machine roadway, intensified ground pressure monitoring is essential near borehole locations in the roof, floor, and rib strata. Supplementary support reinforcement should be implemented when required to prevent rib spalling and roof collapse incidents. Full article

This study is a systematic critical review aimed at rigorously evaluating the potential of Hermetia illucens larvae (black soldier fly larvae, BSFL) as a sustainable protein source for animal feed through a standardized methodological framework. To address the significant challenge posed by the increasing global demand for protein feed to agricultural sustainability, we retrieved relevant studies published between October 2008 and June 2025 from three core databases—PubMed, ScienceDirect, and Web of Science—and conducted study screening and data extraction in accordance with the PRISMA guidelines. BSFL represent a viable alternative, with a high protein content of 40–60% and efficient organic waste conversion capabilities. This systematic review explores the potential of BSFL to replace traditional protein sources such as fishmeal and soybean meal in animal feed, highlighting their advantages in enhancing growth performance, improving gut health, and reducing methane emissions in ruminants. However, there are still critical research gaps, including the need for standardized safety assessments regarding heavy metal accumulation and chitin digestibility. Addressing these challenges through optimized rearing techniques and rigorous safety evaluations will be crucial for scaling up BSFL production and advancing the development of circular agriculture. Full article

Enhancing forage protein is key to sustainable ruminant nutrition. The nutritive value of Hedysarum coronarium L. was investigated by studying different preservation systems (fresh vs. dehydrated pellet vs. hay) (Exp. 1) and morphological fractions (flowers vs. leaves vs. stems) (Exp. 2). For the fresh and pelleted systems, two cuts were used. Proximately, total polyphenols and condensed tannins were detected. In vitro fermentation characteristics were studied by incubating samples with buffered sheep rumen fluid, estimating methane production by volatile fatty acids. Fresh and pelleted sulla were more nutritionally advantageous than hay, in terms of metabolizable energy and protein-to-fiber ratio. Pelleting at the beginning of flowering proved to be a suitable forage for sheep feeding due to protein (15.1% DM), metabolizable energy (9.64 MJ/kg DM), structural carbohydrates (39.5% DM), and total polyphenols (13.5 GAE g/kg DM) content. This cut showed an in vitro fermentation rate (9.86 mL/h), organic matter degradability (55.7%), and volatile fatty acids (87.3 mmoL/g) that were higher (p < 0.05) than hay. Flowers and leaves showed higher (p < 0.05) levels of secondary metabolites than stems as well as lower methane production. These results suggest the potential influence of these compounds in reducing rumen emissions. Dehydration and pelleting resulted in an effective preservation method for maintaining nutrients in sulla forage. Full article

While the Ankom RF system facilitates efficient high-throughput in vitro fermentation studies, its high cost and limited flexibility constrain its broader applicability. To address these limitations, we developed and validated a low-cost, modular gas monitoring system (FerME), assembled from commercially available components. To evaluate its performance and reproducibility relative to the Ankom RF system (Ankom Technology, Macedon, NY, USA), in vitro rumen fermentation experiments were conducted under strictly controlled and identical conditions. Whole rumen contents were collected approximately 2 h post-feeding from individual mid- or late-lactation dairy cows and immediately transported to the laboratory. Each fermenter received 50 mL of processed rumen fluid, 100 mL of anaerobically prepared artificial saliva buffer, and 1.2 g of the donor cow’s diet. Bottles were sealed with the respective system’s pressure sensors, flushed with CO₂, and incubated in a 50 L water bath maintained at 39 °C. FerME (New Taipei City, Taiwan) and Ankom RF fermenters were placed side-by-side to ensure uniform thermal conditions. To assess the effect of filter bag use, an additional trial employed Ankom F57 filter bags (Ankom Technology, Macedon, NY, USA; 25 μm pore size). Trial 1 revealed no significant differences in cumulative gas production, volatile fatty acids (VFAs), NH₃-N, or pH between systems (p > 0.05). However, the use of filter bags reduced gas output and increased propionate concentrations (p < 0.05). Trial 2, which employed filter bags in both systems, confirmed comparable results, with the FerME system demonstrating improved precision (CV: 4.8% vs. 13.2%). Gas composition (CH₄ + CO₂: 76–82%) and fermentation parameters remained consistent across systems (p > 0.05). Importantly, with 12 pressure sensors, the total cost of FerME was about half that of the Ankom RF system. Collectively, these findings demonstrate that FerME is a reliable, low-cost alternative for real-time rumen fermentation monitoring and could be suitable for studies in animal nutrition, methane mitigation, and related applications. Full article