Search Results (754)

The use of low-resolution analog-to-digital converters (ADCs) in receivers has emerged as an effective solution for reducing power consumption in millimeter-wave (mmWave) massive multiple-input–multiple-output (MIMO) systems. However, low-resolution ADCs also pose significant challenges for channel estimation. To address this issue, we propose a joint uplink/downlink (UL/DL) channel estimation algorithm that utilizes the spatial reciprocity of frequency division duplex (FDD) to improve the estimation of quantized UL channels. Quantified UL/DL channels are concentrated at the BS for joint estimation. This estimation problem is regarded as a compressed sensing problem with finite bits, which has led to the development of expectation-maximization-based quantitative generalized approximate messaging (EM-QGAMP) algorithms. In the expected step, QGAMP is used for posterior estimation of sparse channel coefficients, and the block maximization minimization (MM) algorithm is introduced in the maximization step to improve the estimation accuracy. Finally, simulation results verified the robustness of the proposed EM-QGAMP algorithm, and the proposed algorithm’s NMSE (normalized mean squared error) outperforms traditional methods by over 90% and recent state-of-the-art techniques by 30%. Full article

Reaction bonding (RB) using Al powder is an effective method for preparing porous ceramics with low shrinkage, high porosity, and high strength. However, it remains challenging to optimize mechanical strength and oil conductivity simultaneously for atomizer applications. Herein, aiming at addressing this issue, porous Al₂O₃ ceramics with ultra-high mechanical strength and oil conductivity were fabricated via the RB process using polymethyl methacrylate (PMMA) microspheres as the pore-forming agent. The pore structure was gradually optimized by regulating the additive amount, particle size, and particle gradation of PMMA microspheres. The bimodal pores, formed by Al oxidation-induced hollow structures (enhancing bonding force) and burnout of large-sized PMMA microspheres, significantly improved mechanical strength; meanwhile, three-dimensional interconnected pores derived from particle gradation increased the diversity and quantity of oil-conduction channels, boosting oil conductivity. Consequently, under an open porosity of 58.2 ± 0.1%, a high compressive strength of 7.9 ± 0.3 MPa (a 54.7% improvement) and an excellent oil conductivity of 2.1 ± 0.0 mg·s⁻¹ (a 46.5% improvement) were achieved. This superior performance combination, overcoming the trade-off between strength and oil conductivity, demonstrates substantial application potential in atomizers. Full article

This paper investigates point-to-point multimodal digital semantic communications in a task-oriented setup, where messages are classified at the receiver. We employ a pre-trained transformer model to extract semantic information and propose three methods for generating semantic codewords. First, we propose semantic quantization that uses quantized embeddings of source realizations as a codebook. We investigate the fixed-length coding, considering the source semantic structure and end-to-end semantic distortion. We propose a neural network-based codeword assignment mechanism incorporating codeword transition probabilities to minimize the expected semantic distortion. Second, we present semantic compression that clusters embeddings, exploiting the inherent semantic redundancies to reduce the codebook size, i.e., further compression. Third, we introduce a semantic vector-quantized autoencoder (VQ-AE) that learns a codebook through training. In all cases, we follow this semantic source code with a standard channel code to transmit over the wireless channel. In addition to classification accuracy, we assess pre-communication overhead via a novel metric we term system time efficiency. Extensive experiments demonstrate that our proposed semantic source-coding approaches provide comparable accuracy and better system time efficiency compared to their learning-based counterparts. Full article

Reconfigurable Intelligent Surface (RIS) has emerged as a promising enabling technology for wireless communications, which significantly enhances system performance through real-time manipulation of electromagnetic wave reflection characteristics. In RIS-assisted communication systems, existing deep learning-based channel state information (CSI) feedback methods often suffer from excessive parameter requirements and high computational complexity. To address this challenge, this paper proposes LwCSI-Net, a lightweight autoencoder network specifically designed for RIS-assisted multiple-input single-output (MISO) systems, aiming to achieve efficient and low-complexity CSI feedback. The core contribution of this work lies in an innovative lightweight feedback architecture that deeply integrates multi-layer convolutional neural networks (CNNs) with attention mechanisms. Specifically, the network employs 1D convolutional operations with unidirectional kernel sliding, which effectively reduces trainable parameters while maintaining robust feature-extraction capabilities. Furthermore, by incorporating an efficient channel attention (ECA) mechanism, the model dynamically allocates weights to different feature channels, thereby enhancing the capture of critical features. This approach not only improves network representational efficiency but also reduces redundant computations, leading to optimized computational complexity. Additionally, the proposed cross-channel residual block (CRBlock) establishes inter-channel information-exchange paths, strengthening feature fusion and ensuring outstanding stability and robustness under high compression ratio (CR) conditions. Our experimental results show that for CRs of 16, 32, and 64, LwCSI-Net significantly improves CSI reconstruction performance while maintaining fewer parameters and lower computational complexity, achieving an average complexity reduction of 35.63% compared to state-of-the-art (SOTA) CSI feedback autoencoder architectures. Full article

The rapid development of deepfake technologies has led to the widespread proliferation of facial image forgeries, raising significant concerns over identity theft and the spread of misinformation. Although recent dual-domain detection approaches that integrate spatial and frequency features have achieved noticeable progress, they still suffer from limited sensitivity to local forgery regions and inadequate interaction between spatial and frequency information in practical applications. To address these challenges, we propose a novel forgery-aware guided spatial–frequency feature fusion network. A lightweight U-Net is employed to generate pixel-level saliency maps by leveraging structural symmetry and semantic consistency, without relying on ground-truth masks. These maps dynamically guide the fusion of spatial features (from an improved Swin Transformer) and frequency features (via Haar wavelet transforms). Cross-domain attention, channel recalibration, and spatial gating are introduced to enhance feature complementarity and regional discrimination. Extensive experiments conducted on two benchmark face forgery datasets, FaceForensics++ and Celeb-DFv2, show that the proposed method consistently outperforms existing state-of-the-art techniques in terms of detection accuracy and generalization capability. The future work includes improving robustness under compression, incorporating temporal cues, extending to multimodal scenarios, and evaluating model efficiency for real-world deployment. Full article

Drone-view object detection models operating under low-light conditions face several challenges, such as object scale variations, high image noise, and limited computational resources. Existing models often struggle to balance accuracy and lightweight architecture. This paper introduces ELS-YOLO, a lightweight object detection model tailored for low-light environments, built upon the YOLOv11s framework. ELS-YOLO features a re-parameterized backbone (ER-HGNetV2) with integrated Re-parameterized Convolution and Efficient Channel Attention mechanisms, a Lightweight Feature Selection Pyramid Network (LFSPN) for multi-scale object detection, and a Shared Convolution Separate Batch Normalization Head (SCSHead) to reduce computational complexity. Layer-Adaptive Magnitude-Based Pruning (LAMP) is employed to compress the model size. Experiments on the ExDark and DroneVehicle datasets demonstrate that ELS-YOLO achieves high detection accuracy with a compact model. Here, we show that ELS-YOLO attains a mAP@0.5 of 74.3% and 68.7% on the ExDark and DroneVehicle datasets, respectively, while maintaining real-time inference capability. Full article

Quantum memory is essential for the prolonged storage and retrieval of quantum information. Nevertheless, no current studies have focused on the creation of effective quantum memory for continuous variables while accounting for the decoherence rate. This work presents an effective continuous-variable quantum key distribution method with parameter optimization utilizing the Elitist Elk Herd Random Immigrants Optimizer (2E-HRIO) technique. At the outset of transmission, the quantum device undergoes initialization and authentication via Compressed Hash-based Message Authentication Code with Encoded Post-Quantum Hash (CHMAC-EPQH). The settings are subsequently optimized from the authenticated device via 2E-HRIO, which mitigates the effects of decoherence by adaptively tuning system parameters. Subsequently, quantum bits are produced from the verified device, and pilot insertion is executed within the quantum bits. The pilot-inserted signal is thereafter subjected to pulse shaping using a Gaussian filter. The pulse-shaped signal undergoes modulation. Authenticated post-modulation, the prediction of link failure is conducted through an authenticated channel using Radial Density-Based Spatial Clustering of Applications with Noise. Subsequently, transmission occurs via a non-failure connection. The receiver performs channel equalization on the received signal with Recursive Regularized Least Mean Squares. Subsequently, a dataset for side-channel attack authentication is gathered and preprocessed, followed by feature extraction and classification using Adaptive Depthwise Separable Convolutional Neural Networks (ADS-CNNs), which enhances security against side-channel attacks. The quantum state is evaluated based on the signal received, and raw data are collected. Thereafter, a connection is established between the transmitter and receiver. Both the transmitter and receiver perform the scanning process. Thereafter, the calculation and correction of the error rate are performed based on the sifting results. Ultimately, privacy amplification and key authentication are performed using the repaired key via B-CHMAC-EPQH. The proposed system demonstrated improved resistance to decoherence and side-channel attacks, while achieving a reconciliation efficiency above 90% and increased key generation rate. Full article

Reliable transmission of high-quality video over wireless channels is challenged by fading and noise, which degrade visual quality and disrupt temporal continuity. To address these issues, this paper proposes a quantum communication framework that integrates quantum superposition with multi-input multi-output (MIMO) spatial diversity techniques to enhance robustness and efficiency in dynamic video transmission. The proposed method converts compressed videos into classical bitstreams, which are then channel-encoded and quantum-encoded into qubit superposition states. These states are transmitted over a $2\times 2$ MIMO system employing varied diversity schemes to mitigate the effects of multipath fading and noise. At the receiver, a quantum decoder reconstructs the classical information, followed by channel decoding to retrieve the video data, and the source decoder reconstructs the final video. Simulation results demonstrate that the quantum MIMO system significantly outperforms equivalent-bandwidth classical MIMO frameworks across diverse signal-to-noise ratio (SNR) conditions, achieving a peak signal-to-noise ratio (PSNR) up to 39.12 dB, structural similarity index (SSIM) up to 0.9471, and video multi-method assessment fusion (VMAF) up to 92.47, with improved error resilience across various group of picture (GOP) formats, highlighting the potential of quantum MIMO communication for enhancing the reliability and quality of video delivery in next-generation wireless networks. Full article

Structural health monitoring in resource-constrained environments demands crack segmentation models that match the accuracy of heavyweight convolutional networks while conforming to the power, memory, and latency limits of watt-level edge devices. This study presents a lightweight dual-attention network, which is a four-stage U-Net compressed to one-quarter of the channel depth and augmented—exclusively at the deepest layer—with a compact dual-attention block that couples channel excitation with spatial self-attention. The added mechanism increases computation by only 19%, limits the weight budget to 7.4 MB, and remains fully compatible with post-training INT8 quantization. On a pixel-labelled concrete crack benchmark, the proposed network achieves an intersection over union of 0.827 and an F1 score of 0.905, thus outperforming CrackTree, Hybrid 2020, MobileNetV3, and ESPNetv2. While refined weight initialization and Dice-augmented loss provide slight improvements, ablation experiments show that the dual-attention module is the main factor influencing accuracy. With 110 frames per second on a 10 W Jetson Nano and 220 frames per second on a 5 W Coral TPU achieved without observable accuracy loss, hardware-in-the-loop tests validate real-time viability. Thus, the proposed network offers cutting-edge crack segmentation at the kiloflop scale, thus facilitating ongoing, on-device civil infrastructure inspection. Full article

Plant diseases significantly undermine agricultural productivity. This study introduces an improved YOLOv10n model named WD-YOLO (Weighted and Double-scale YOLO), an advanced architecture for efficient plant disease detection. The PlantDoc dataset was initially enhanced using data augmentation techniques. Subsequently, we developed the DSConv module—a novel convolutional structure employing double-scale weighted convolutions that dynamically adjust to different scale perceptions and optimize attention allocation. This module replaces the conventional Conv module in YOLOv10. Furthermore, the WTConcat module was introduced, dynamically merging weighted concatenation with a channel attention mechanism to replace the Concat module in YOLOv10. The training of WD-YOLO incorporated knowledge distillation techniques using YOLOv10l as a teacher model to refine and compress the architectural learning. Empirical results reveal that WD-YOLO achieved an mAP50 of 65.4%, outperforming YOLOv10n by 9.1% without data augmentation and YOLOv10l by 2.3%, despite having significantly fewer parameters (9.3 times less than YOLOv10l), demonstrating substantial gains in detection efficiency and model compactness. Full article

Driven by dual carbon targets, the scale of wind power integration has surged dramatically. However, its strong volatility causes insufficient short-term prediction accuracy, severely constraining grid security and economic dispatch. To address three key challenges in extracting temporal characteristics of strong volatility, adaptive fusion of multi-source features, and enhancing model interpretability, this paper proposes a Time-Domain Dual-Channel Adaptive Learning Model (TDDCALM). The model employs dual-channel feature decoupling: one Transformer encoder layer captures global dependencies while the raw state layer preserves local temporal features. After TCN-based feature compression, an adaptive weighted early fusion mechanism dynamically optimizes channel weights. The ACON adaptive activation function autonomously learns optimal activation patterns, with fused features visualized through visualization techniques. Validation on two wind farm datasets (A/B) demonstrates that the proposed method reduces RMSE by at least 8.89% compared to the best deep learning baseline, exhibits low sensitivity to time window sizes, and establishes a novel paradigm for forecasting highly volatile renewable energy power. Full article

As the resolution and data volume of remote sensing imagery continue to grow, achieving efficient compression without sacrificing reconstruction quality remains a major challenge, given that traditional handcrafted codecs often fail to balance rate-distortion performance and computational complexity, while deep learning-based approaches offer superior representational capacity. However, challenges remain in achieving a balance between fine-detail adaptation and computational efficiency. Mamba, a state–space model (SSM)-based architecture, offers linear-time complexity and excels at capturing long-range dependencies in sequences. It has been adopted in remote sensing compression tasks to model long-distance dependencies between pixels. However, despite its effectiveness in global context aggregation, Mamba’s uniform bidirectional scanning is insufficient for capturing high-frequency structures such as edges and textures. Moreover, existing visual state–space (VSS) models built upon Mamba typically treat all channels equally and lack mechanisms to dynamically focus on semantically salient spatial regions. To address these issues, we present an innovative architecture for distant sensing image compression, called the Multi-scale Channel Global Mamba Network (MGMNet). MGMNet integrates a spatial–channel dynamic weighting mechanism into the Mamba architecture, enhancing global semantic modeling while selectively emphasizing informative features. It comprises two key modules. The Wavelet Transform-guided Local Structure Decoupling (WTLS) module applies multi-scale wavelet decomposition to disentangle and separately encode low- and high-frequency components, enabling efficient parallel modeling of global contours and local textures. The Channel–Global Information Modeling (CGIM) module enhances conventional VSS by introducing a dual-path attention strategy that reweights spatial and channel information, improving the modeling of long-range dependencies and edge structures. We conducted extensive evaluations on three distinct remote sensing datasets to assess the MGMNet. The results of the investigations revealed that MGMNet outperforms the current SOTA models across various performance metrics. Full article

Traditional antenna arrays for direction-of-arrival (DOA) estimation typically require numerous elements to achieve target performance, increasing system complexity and cost. Reconfigurable intelligent surfaces (RISs) offer a promising alternative, yet their performance critically depends on phase coding design. To address this, we propose a phase coding design method for RIS-aided DOA estimation with a single receiving channel. First, we establish a system model where averaged received signals construct a power-based formulation. This transforms DOA estimation into a compressed sensing-based sparse recovery problem, with the RIS far-field power radiation pattern serving as the measurement matrix. Then, we derive the decoupled expression of the measurement matrix, which consists of the phase coding matrix, propagation phase shifts, and array steering matrix. The phase coding design is then formulated as a Frobenius norm minimization problem, approximating the Gram matrix of the equivalent measurement matrix to an identity matrix. Accordingly, the phase coding design problem is reformulated as a Frobenius norm minimization problem, where the Gram matrix of the equivalent measurement matrix is approximated to an identity matrix. The phase coding is deterministically constructed as the product of a unitary matrix and a partial Hadamard matrix. Simulations demonstrate that the proposed phase coding design outperforms random phase coding in terms of angular estimation accuracy, resolution probability, and the requirement of coding sequences. Full article

Microscopic image automatic recognition is a core technology for mineral composition analysis and plays a crucial role in advancing the intelligent development of smart mining systems. To overcome the limitations of traditional lithium ore analysis and meet the challenges of deployment on edge devices, we propose PS-YOLO-seg, a lightweight segmentation model specifically designed for lithium mineral analysis under visible light microscopy. The network is compressed by adjusting the width factor to reduce global channel redundancy. A PSConv-based downsampling strategy enhances the network’s ability to capture dim mineral textures under microscopic conditions. In addition, the improved C3k2-PS module strengthens feature extraction, while the streamlined Segment-Efficient head minimizes redundant computation, further reducing the overall model complexity. PS-YOLO-seg achieves a slightly improved segmentation performance compared to the baseline YOLOv12n model on a self-constructed lithium ore microscopic dataset, while reducing FLOPs by 20%, parameter count by 33%, and model size by 32%. Additionally, it achieves a faster inference speed, highlighting its potential for practical deployment. This work demonstrates how architectural optimization and targeted enhancements can significantly improve instance segmentation performance while maintaining speed and compactness, offering strong potential for real-time deployment in industrial settings and edge computing scenarios. Full article

Under the global initiative for automotive lightweighting to address climate challenges, this study investigates the microstructure evolution of steel–aluminum composites processed by hot equal-channel angular pressing (H-ECAP). Using 6061-T6 aluminum cores clad with 20 # low carbon steel tubes processed through 1–4 C-path passes (Φ = 120°, ψ = 30°), we demonstrate significant microstructural improvements. The steel component showed progressive grain refinement from 2.2 μm (1 pass) to 1.3 μm (4 pass), with substructures decreasing from 72.19% to 35.46%, HAGB increasing from 31.2% to 34.6%, and hardness increasing from 222 HV to 271 HV. Concurrently, aluminum experienced grain refinement from 59.3 μm to 28.2 μm, with recrystallized structures surging from 0.97% to 71.81%, HAGB increasing from 9.96% to 63.76%, and hardness increasing from 51.4 HV to 83.6 HV. The interfacial layer thickness reduced by 74% (29.98 μm to 7.78 μm) with decreasing oxygen content, containing FeAl₃, Fe₂Al₅, and minimal matrix oxides. Yield strength gradually increased from 361 MPa (one pass) to 372.35 MPa (four passes), accompanied by a significant enhancement in compressive strength. These findings reveal that H-ECAP’s thermomechanical coupling effect effectively enhances interface bonding quality while suppressing detrimental intermetallic growth, providing a viable solution to overcome traditional manufacturing limitations in steel–aluminum composite applications for sustainable mobility. Full article