Search Results (4,321)

The existence of dissolved organic matter (DOM) in aquatic environments presents significant challenges to both the environment and public health. This study examines the adsorption efficacy of six organic adsorbents, such as three commercial (coconut shells [CS], palm kernel shells [PKS], and graphite [GR]) and three waste-based materials (plantain peels [PP], water hyacinth leaves [WHL], and corn cobs [CC]) for DOM removal. The waste-derived adsorbents were prepared using thermal and chemical activation techniques, while the commercial adsorbents were used in their standard forms. Adsorption experiments were conducted and analyzed using both kinetic and isotherm models to evaluate removal efficiency and underlying mechanisms. Kinetic modeling revealed that CS, PP, CC, and GR followed pseudo-second-order kinetics, PKS conformed to pseudo-first-order kinetics, and WHL exhibited intra-particle diffusion dominance. The Freundlich isotherm model effectively characterizes the adsorption equilibrium for every material, indicating the multilayer adsorption and heterogeneity of the adsorbent surfaces. Among all tested materials, GR showed the highest DOM removal efficiency (up to 96%) and excellent thermal stability, making it the most effective adsorbent overall. WHL also showed competitive performance, while CS emerged as the most economically viable option despite having slightly lower removal efficiency. Surface area alone does not guarantee adsorption efficiency. Pore accessibility (governed by size/distribution) and surface chemistry (functional group diversity) are equally critical. The findings suggest that both commercial and waste-derived adsorbents hold promise for sustainable and cost-effective water treatment applications. Integrating such materials could enhance the circular economy and offer scalable solutions for addressing water quality issues in developing regions. Full article

In this study, a selection of active materials were coated onto commercially available intermediate modulus carbon fibers to form and analyze the performance of novel composite cathodes for structural power composites. Various slurries containing polyvinylidene fluoride (PVDF), active material powders, 1-methyl-2-pyrrolidone (NMP) and carbon black (CB) were used to coat carbon fiber tows by immersion. Four active materials—lithium cobalt oxide (LCO), lithium iron phosphate (LFP), lithium nickel manganese cobalt oxide (NMC), and lithium nickel cobalt aluminum oxide (NCA)—were individually tested to assess their electrochemical reversibility. The cells were prepared with a polymer separator and liquid electrolytes and assembled in 2025-coin cells. Electrochemical analysis of the cathode materials showed that at C/5 and room temperature the measured capacities ranged from 39.8 Ah kg⁻¹ to 64.7 Ah kg⁻¹ for the LFP and NCA active materials, respectively. The full cells exhibited capacities of 18.1, 23.5, 27.2, and 28.2 Ah kg⁻¹ after 55 cycles for LFP, LCO, NCA, and NMC811, respectively. Finally, visual and elemental analysis were performed via scanning electron microscope (SEM) and energy-dispersive x-ray (EDX) confirming desirable surface coverage and successful transfer of the active materials onto the carbon fiber tows. Full article

Nb₂O₅ (niobia) coatings were prepared by spin coating of niobium sol, synthesized using niobium chloride as the precursor and ethanol and water as solvents, followed by high-temperature annealing. Doping of the films was achieved by incorporating commercially available SiO₂ (Ludox) and noble metal nanoparticles (NPs) into the sol prior to its deposition. Various sizes of Pt (5 and 30 nm), Ag (10, 20, and 40 nm), and Au (5, 10, and 20 nm) NPs were used to enhance sensing behavior of coatings. After annealing, films were subjected to chemical etching to remove the silica phase. This process generated porosity within the films, which in turn enabled the tailoring of both their optical and sensing properties. It was demonstrated that both the type and size of the incorporated nanoparticles significantly influenced the sensing behavior. The most effective enhancement was observed with the addition of 10 nm AuNPs. Optical characterization indicated that 10 nm AuNPs had a minimal effect on the optical properties. In contrast, doping with 20 nm AuNPs led to a reduction in the refractive index and an increase in Urbach energy. No significant alteration in the optical band gap due to doping was observed. Full article

The different macro and micro geometries of dental implants are parameters that directly affect osseointegration, making them an important area for research. The objective of this preclinical study was to compare, through histological and histomorphometric analyses, the biological response of two different dental implant surfaces in osseointegration. Surface morphology and chemistry were characterized by SEM/EDX, optical-emission spectroscopy, protein adsorption (BSA), and adipose-derived stem-cell morphology. For the in vivo arm, ten commercially pure titanium implants (n = 5 LS160 + 5 SBAE) were placed bilaterally in the tibiae of five skeletally mature New Zealand rabbits (one implant of each surface per animal). After six weeks, undecalcified sections were prepared and bone-to-implant contact (BIC) and bone-area-fraction occupancy (BAFO) were quantified histomorphometrically. Data normality was confirmed with the Shapiro–Wilk test; paired two-tailed Student’s t-tests were applied (α = 0.05). Results: The descriptive histological analysis showed a fraction of pre-existing bone in all experimental groups, which probably ensured primary stability. Adjacent to this area, it was possible to observe peri-implant newformed bone in all tested groups. The results of the histomorphometric analysis of BIC and BAFO were considered normal by the Shapiro–Wilk test (p > 0.05); after six weeks of implantation, the BIC values for the LS160 and SBAE groups were 44.13 (15.83–72.43) and 39.24 (10.72–89.21), respectively. The analysis of variance (ANOVA and Tukey’s post-test) showed no statistical differences between the groups tested. Likewise, the bone volume density showed no statistical differences between the groups (ANOVA and Tukey’s post-test) with averages of 41.27 (C.I. 24.00–58.55) and 26.52 (C.I. −17.51–70.54) in the LS160 and SBAE groups, respectively. Although both surfaces showed similar osseointegration after six weeks, the new surface appears to be a promising, eco-friendly alternative to SBAE. Future studies with shorter time points and larger samples are needed to assess early biological responses. Full article

Emerging technologies present significant challenges for society as a whole. Among these, Artificial Intelligence (AI) stands out for its transformative potential, with the capacity to fundamentally reshape human thought, behavior, and lifestyle. This article seeks to explore the business-oriented perspective on how AI should be approached in Higher Education (HE) in order to serve the commercial objectives of companies. The motivation for this inquiry stems from recurrent criticisms directed at HE institutions, particularly their perceived inertia in adopting innovations, resistance to change, and delayed responsiveness to evolving labor market demands. In this context, the study examines what businesses deem essential for universities to provide in the context of AI familiarity and examines how companies envision future collaboration between the business sector and Higher Education institutions in using AI for business applications. Adopting a qualitative research methodology, this study conducted interviews with 16 middle-management representatives from international corporations operating across diverse industries. The data were analyzed using Gioia’s methodology, which facilitated a structured identification of first-order concepts, second-order themes, and aggregate dimensions. This analytical framework enabled a nuanced understanding of business expectations regarding the role of HE institutions in preparing graduates capable of meeting economic and commercial imperatives under the pressure of AI diffusion. Full article

This paper reports on the use of acetyl-L-valine (Ac-Val) as an effective and precise pH modifier for inducing hydrogel formation. Ac-Val offers several advantages: it is fully water-soluble, overcoming dissolution issues, and allows for stock solution preparation to fine-tune trigger volume and final material pH. As a weaker carboxylic acid compared to inorganic acids, Ac-Val enables more controlled pH variation. For comparison, a commercial lactic acid (LA) solution was also evaluated. The reliability of Ac-Val as a pH modifier was tested on three amino acid derivatives—Boc-Dopa(Bn)₂-OH, Lau-Dopa(Bn)₂-OH, and Pal-Phe-OH, all known to be efficient gelators. These molecules, sharing common structural features, form gels varying in transparency, robustness, and elasticity. Notably, Pal-Phe-OH is a supergelator. A key benefit of Ac-Val lies in its ability to cause an instantaneous pH modification, allowing for precise pH adjustment before the gel network forms. This pH-change approach with Ac-Val demonstrates broad applicability, enabling the creation of gels with tailored pH values for various acidic molecules, which is particularly valuable for applications like drug delivery where specific pH environments are crucial. Full article

Silicon carbide (SiC) and silicon nanoparticle-decorated carbon (Si/C) materials are electrodes that can potentially be used in various rechargeable batteries, owing to their inimitable merits, including non-flammability, stability, eco-friendly nature, low cost, outstanding theoretical capacity, and earth abundance. However, SiC has inferior electrical conductivity, volume expansion, a low Li⁺ diffusion rate during charge–discharge, and inevitable repeated formation of a solid–electrolyte interface layer, which hinders its commercial utilization. To address these issues, extensive research has focused on optimizing preparation methods, engineering morphology, doping, and creating composites with other additives (such as carbon materials, metal oxides, nitrides, chalcogenides, polymers, and alloys). Owing to the upsurge in this research arena, providing timely updates on the use of SiC and Si/C for batteries is of great importance. This review summarizes the controlled design of SiC-based and Si/C composites using various methods for rechargeable metal-ion batteries like lithium-ion (LIBs), sodium-ion (SIBs), zinc-air (ZnBs), and potassium-ion batteries (PIBs). The experimental and predicted theoretical performance of SiC composites that incorporate various carbon materials, nanocrystals, and non-metal dopants are summarized. In addition, a brief synopsis of the current challenges and prospects is provided to highlight potential research directions for SiC composites in batteries. Full article

Chrysanthemum morifolium Ramat. is an important ornamental plant, holding dual economic value as a medicinal and edible plant. Jinsi Huangju is a popular healthy tea drink prepared from the large and elegant shaped flowers of C. morifolium. However, the suboptimal accumulation of bioactive flavonoids during conventional harvest (full bloom stage) limits its commercial potential. To elucidate the molecular mechanisms governing flavonoid biosynthesis in Jinsi Huangju flowers and identify key genetic regulators for metabolic engineering, we performed integrated metabolomic and transcriptomic analyses of flowers at distinct developmental stages using ultra-performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) and RNA-seq. Differential metabolites were screened, and candidate genes were validated via transient transformation assays. Among 2146 identified metabolites, flavonoids were the predominant differential compounds, with accumulation patterns being strongly stage dependent. Thirty-eight flavonoid biosynthetic genes and key transcription factors from the MYB, bHLH, and WD40 families exhibited dynamic expression. The CmMYB8a was confirmed as a positive regulator of flavonoid biosynthesis through transient overexpression. This study deciphers the stage-specific flavonoid accumulation in Jinsi Huangju and identifies CmMYB8a as a pivotal regulatory target. Our findings provide genetic resources for breeding high-flavonoid cultivars via molecular design. Full article

The effective integration of energy storage systems is paramount for the widespread deployment of renewable energy technologies. Selection of a specific storage system is typically dictated by the primary challenge it aims to mitigate, such as intermittency, grid stability, or power quality. The optimization of overall system efficiency and longevity is increasingly achieved through hybrid storage systems that integrate supercapacitors into their designs. This research introduces a novel circuital equivalent for a commercial supercapacitor, optimized for precise simulations within the frequency range of power electronics applications. A key distinction of this circuital equivalent lies in its rigorous foundation: its comprehensive characterization across a broad frequency spectrum, specifically from 0.01 Hz to 300 kHz, employing a commercial frequency response analyzer. This precise circuital representation offers substantial utility in simulation, analysis, and design of high-frequency circuits, particularly for switched-power converter design and control. It enables the anticipation of undesirable phenomena, such as significant voltage ripple and operational instability. This predictive capability is crucial for experimental preparation, facilitating the proactive integration of necessary filters and protective measures within sensing circuits, thereby underscoring its value prior to physical implementation. In addition, the developed circuital equivalent exhibits broad compatibility, allowing seamless implementation within commercial circuit simulators. Finally, the proposed methodology was illustrated with a commercial supercapacitor, but it can be applied to other supercapacitor types or manufacturers. Full article

Traditional plastic packaging materials have brought serious environmental pollution and a number of health risks; so the development of biodegradable polymers as an alternative has received increasing attention. Here, active packaging materials with antioxidant, antimicrobial, and biodegradable properties were prepared using poly(lactic acid) (PLA) and chitosan loaded with quercetin. The experimental results demonstrate that the PLA/chitosan/quercetin film achieved an impressive ABTS radical scavenging rate of up to 98.2%, and the inhibition rates against Gram-negative (E. coli) and Gram-positive (S. aureus) bacteria were 87.60% and 80.45%, respectively. Furthermore, the composite film exhibited excellent oxygen barrier properties and biodegradability. Shelf life tests demonstrate that the PLA/chitosan/quercetin film retarded fish spoilage by 2 days compared to commercial polyethylene film. Additionally, the color changes in the film showed significant correlation with fish freshness, serving as an effective freshness indicator. Therefore, the PLA/chitosan composite film containing quercetin has a good application prospect in fish preservation and intelligent monitoring of fish freshness. Full article

Nanocrystals, defined as crystalline particles with dimensions in the nanometer range (<1000 nm), exhibit unique properties that enhance the efficacy of poorly soluble active compounds. This review explores the fundamental aspects of nanocrystals, including their characteristics and various preparation methods, while addressing critical factors that influence their stability and incorporation into final products. A key focus of the review is the advantages offered by nanocrystals in dermal applications. It also highlights their ability to enhance passive diffusion into the skin and facilitate penetration via particle-assisted dermal penetration. Additionally, the review discusses their capacity to penetrate into hair follicles, enabling targeted drug delivery, and their synergistic potential when combined with microneedles, which further enhance the dermal absorption of active compounds. The review also addresses several commercial products that successfully employ nanocrystal technology, showcasing its practical applications. Summary: Nanocrystals with their special properties are an emerging trend for dermal applications, particularly the development of plantCrystals—natural nanocrystals sourced from plant materials—which represent a promising path for future research and formulation strategies. These advancements could lead to more sustainable and effective dermal products. Full article

With the growth of the plant-based food sector, increasing amounts of by-products are generated. Sea buckthorn pomace (SBP), a by-product of juice and other manufacturing products, is rich in bioactive compounds such as phenolics, oligosaccharides, proteins, and dietary fiber. The aim of the study was to evaluate the impact of modification methods, such as enzymatic hydrolysis and supercritical carbon dioxide extraction (SFE-CO₂), on the chemical composition and technological properties of SBP. SBP and SBP obtained after SFE-CO₂ (SBP-CO₂) were enzymatically modified using Pectinex^® Ultra Tropical, Viscozyme^® L, and Celluclast^® 1.5 L (Novozyme A/S, Bagsværd, Denmark). The SBP’s main constituent was insoluble dietary fiber (IDF), followed by crude proteins and lipids (respectively, 58.7, 21.1 and 12.6 g/100 in d.m.). SFE-CO₂ reduced the lipid content (by 85.7%) in the pomace while increasing protein and TDF content. Enzymatic hydrolysis decreased the content of both soluble dietary fiber (SDF) and IDF, and increased the content of mono- and oligosaccharides as well as free phenolics, depending on the commercial enzyme preparation used in SBP and SBP-CO₂ samples. Celluclast^® 1.5 L was the most effective in hydrolyzing IDF, while Viscozyme^® L and Pectinex^® Ultra Tropical were the most effective in degrading SDF. Enzymatic treatment improved water swelling capacity, water retention capacity, water solubility index, oil retention capacity of SBP and SBP-CO₂; however, it did not have a significant effect on the stability of the emulsions. Modification of SBP by SFE-CO₂ effectively increased WSC and WSI, however it reduced WRC. These findings highlight the potential of targeted modifications to enhance the nutritional and technological properties of SBP for functional food applications. Full article

While the Ankom RF system facilitates efficient high-throughput in vitro fermentation studies, its high cost and limited flexibility constrain its broader applicability. To address these limitations, we developed and validated a low-cost, modular gas monitoring system (FerME), assembled from commercially available components. To evaluate its performance and reproducibility relative to the Ankom RF system (Ankom Technology, Macedon, NY, USA), in vitro rumen fermentation experiments were conducted under strictly controlled and identical conditions. Whole rumen contents were collected approximately 2 h post-feeding from individual mid- or late-lactation dairy cows and immediately transported to the laboratory. Each fermenter received 50 mL of processed rumen fluid, 100 mL of anaerobically prepared artificial saliva buffer, and 1.2 g of the donor cow’s diet. Bottles were sealed with the respective system’s pressure sensors, flushed with CO₂, and incubated in a 50 L water bath maintained at 39 °C. FerME (New Taipei City, Taiwan) and Ankom RF fermenters were placed side-by-side to ensure uniform thermal conditions. To assess the effect of filter bag use, an additional trial employed Ankom F57 filter bags (Ankom Technology, Macedon, NY, USA; 25 μm pore size). Trial 1 revealed no significant differences in cumulative gas production, volatile fatty acids (VFAs), NH₃-N, or pH between systems (p > 0.05). However, the use of filter bags reduced gas output and increased propionate concentrations (p < 0.05). Trial 2, which employed filter bags in both systems, confirmed comparable results, with the FerME system demonstrating improved precision (CV: 4.8% vs. 13.2%). Gas composition (CH₄ + CO₂: 76–82%) and fermentation parameters remained consistent across systems (p > 0.05). Importantly, with 12 pressure sensors, the total cost of FerME was about half that of the Ankom RF system. Collectively, these findings demonstrate that FerME is a reliable, low-cost alternative for real-time rumen fermentation monitoring and could be suitable for studies in animal nutrition, methane mitigation, and related applications. Full article

During large-scale pavement construction, the preparation of SBS-modified asphalt typically produces large amounts of harmful fumes. The emergence of deodorants can effectively alleviate the problem of smoke emissions during the asphalt manufacturing process. On the basis of ensuring the original road performance, exploring more suitable dosages and types of deodorant is urgently needed. Five commercial deodorants were evaluated using an asphalt smoke collection system, and UV-visible spectrophotometry (UV) was employed to screen the deodorants based on smoke concentration. Gas chromatography–mass spectrometry (GC-MS) was used to quantitatively analyze changes in harmful smoke components before and after adding two deodorants. Subsequently, the mechanisms of action of the two different types of deodorants were analyzed microscopically using fluorescence microscopy. Finally, the performance of bitumen and asphalt mixtures after adding deodorants was evaluated. The results showed that deodorant A (reactive type) and D (adsorption type) exhibited the best smoke suppression effects, with optimal addition rates of 0.6% and 0.5%, respectively. Deodorant A reduced benzene homologues by nearly 50% and esters by approximately 40%, while deodorant D reduced benzene homologues by approximately 70% and esters by approximately 60%, without producing new toxic gases. Both deodorants had a minimal impact on the basic properties of bitumen and the road performance of asphalt mixtures, with all indicators meeting technical specifications. This research provides a theoretical basis for the effective application of deodorants in the future, truly enabling a transition from laboratory research to large-scale engineering applications in the construction of environmentally friendly roads. Full article

The windowpane oyster (Placuna placenta) is common in coastal areas of the Philippines, thriving in brackish waters. Its shells underpin the local craft industries. While its meat is edible, only small amounts are consumed locally, most going to waste. Utilization of this potential nutrient source is hindered by the lack of information concerning its organic and mineral content, the possible presence of heavy metal ions, and the risk of microbial pathogens. We report extensive analysis of the meat from Placuna placenta, harvested during three different seasons to account for potential variations. This comprises proximate analysis, mineral, antioxidant, and microbial analyses. While considerable seasonal variation was observed, the windowpane oyster was found to be a rich source of protein, fats, minerals, and carbohydrates, comparing well with the meats of other shellfish and land animals. Following pre-cooking (~90 °C, 25–30 min), the standard local method for food preparation, no viable E. coli or Salmonella sp. were detected. Mineral content was broadly similar to that reported in fish, although iron, zinc, and copper were more highly represented, nevertheless, heavy metals were below internationally acceptable levels, with the exception of one of three samples, which was slightly above the only current standard, FSANZ. Whether the arsenic was in the safer organic form, which is commonly the case for shellfish, or the more toxic inorganic form remains to be established. This and the variation of arsenic over time will need to be considered when developing food products. Overall, the meat of the windowpane oyster is a valuable food resource and its current (albeit low-level) use should lower any barriers to its acceptance, making it suitable for commercialization. The present data support its development for high-value food products in urban markets. Full article