Search Results (297)

Rigid polyurethane foams obtained using different amounts of biopolyol synthesized via transesterification of rapeseed oil with triethanolamine were subjected to glycolysis in order to obtain rebiopolyols. It was demonstrated that the biopolyol content in the parent foam influences both the chemical structure and the properties of the recovered rebiopolyols. FTIR and GPC analyses confirmed changes in the proportions of urethane, ester, and ether linkages. They also revealed the release of free triethanolamine and the formation of monoglycerides resulting from partial cleavage of fatty acid ester groups originally present in the biopolyol. Increasing the biopolyol content led to a reduction in the viscosity and the number-average molecular weight, along with an increase in the amine number. The rebiopolyols were preliminarily evaluated in polyurethane formulations, and FOAMAT measurements indicated an increase in the foaming reactivity with a higher amine content. Complete replacement of the petrochemical polyol with rebiopolyols was possible only when the starting foam contained up to 50 wt% biopolyol, while higher biopolyol contents resulted in excessive reactivity. These results demonstrate that the biopolyol content in the foam subjected to glycolysis is the key factor determining the suitability of rebiopolyols for reuse in the synthesis of new polyurethane foams. Full article

Graphitic nanomaterials have emerged as foundational components in nanoscience owing to their exceptional electrical, mechanical, and chemical properties, which can be tuned by controlling dimensionality and structural order. From zero-dimensional (0D) quantum dots, carbon nano-onions, and nanodiamonds to one-dimensional (1D) nanoribbons, two-dimensional (2D) nanowalls, and three-dimensional (3D) graphene foams, these architectures underpin advancements in catalysis, energy storage, sensing, and electronic technologies. Among various synthesis routes, chemical vapor deposition (CVD) provides unmatched versatility, enabling atomic-level control over carbon supply, substrate interactions, and plasma activation to produce well defined graphitic structures directly on functional supports. This review presents a comprehensive, dimension-resolved overview of CVD-derived graphitic nanomaterials, examining how process parameters such as precursor chemistry, temperature, hydrogen etching, and template design govern nucleation, crystallinity, and morphological evolution across 0D to 3D hierarchies. Comparative analyses of Raman, XPS, and XRD data are integrated to relate structural features with growth mechanisms and functional performance. By connecting mechanistic principles across dimensional scales, this review establishes a unified framework for understanding and optimizing CVD synthesis of graphitic nanostructures. It concludes by outlining a path forward for improving how CVD-grown carbon nanomaterials are made, monitored, and integrated into real devices so these can move from lab-scale experiments to practical, scalable technologies. Full article

Five types of fruit seed oils have been described from the perspective of their potential use in the synthesis of biopolyols. The overall goal is to increase the participation of biopolyurethanes in polymer production, aligning with the European Green Deal. Blackcurrant, cherry, grape, pomegranate, and watermelon seed oils were characterized by iodine value, acid value, density, average molecular weight, viscosity, and fatty acid profile. The thermal properties of the oils were also determined using thermogravimetry (TGA) and differential scanning calorimetry (DSC). In order to obtain reactive compounds for the synthesis of biopolyols, the vegetable oils were modified using the transesterification reaction with triethanolamine. The resulting biopolyols were characterized by their hydroxyl number, acid number, density, average molar mass, and viscosity. The biopolyols were then used to produce thermal-insulating polyurethane foams by completely replacing petrochemical polyols with counterparts derived from fruit seeds. The obtained foams were described by their closed cell content, apparent density, thermal conductivity coefficient, dimensional stability, maximum stress at 10% deformation, thermal stability, oxygen index, and water absorption. In addition, an analysis of the foaming process revealed that the properties of fruit seed oil after chemical modification had an impact on the properties of the open-cell polyurethane foams and the foaming process itself. Full article

Growing consumer preference for natural products has prompted interest in the use of plant extracts as plant raw materials providing active ingredients for cosmetics. This study focuses on vine tendrils, a by-product of grape cultivation, as a sustainable source of bioactive compounds. The idea of loan extraction using components borrowed from the final formulation was applied to extract valuable compounds from vine tendrils. The effectiveness of different extraction media was compared by analyzing the chemical profile of the extracts obtained using LC–MS/MS and UV–VIS techniques. The results obtained indicate the potential of extracts from grapevine tendrils as plant materials rich in bioactive substances with antioxidant properties, which supports their use in cosmetic products aimed at improving hair condition and skin protection. It is important to emphasize that grapevine tendrils are considered waste material that must be removed during vineyard maintenance. Cosmetics based on the processed extracts were prepared and evaluated. The viscosity, foaming properties, color parameters, and irritation potential of the developed cosmetics were assessed. The obtained results demonstrated the potential of the waste material as a valuable source of natural cosmetic components. Full article

Pre-coated metal sheets (PCM), as a popular product in modern coating industries, offer significant advantages such as simple processing, lightweight properties, and excellent manufacturability. The pretreatment layer within its coating system has a significant impact on overall corrosion resistance. In this study, through a comparative analysis of two chromate-free pretreatment systems, we conducted a thorough investigation into the combination of the pretreatment layer and examined the impact on the corrosion performance of pre-coated metal sheets. It was found that the phytic acid-based pretreatment layer enhances the adhesion between the primer and the substrate by forming strong chemical bonds with the primer layer, which effectively inhibits the lateral diffusion of corrosive media to the metal surface. Consequently, pre-coated metal sheets with the phytic acid-based pretreatment exhibit superior anti-foaming performance compared to the system using the silane-based pretreatment layer. This provides a new insight into the design and development of Cr-free pretreatment systems with better corrosion resistance performance. Full article

Reservoirs in the Orinoco Heavy Oil Belt, Venezuela, typically hold natural foamy oil. Gas liberation during depletion leads to a sharp increase in viscosity, adversely impacting development efficiency. Therefore, this paper proposes a natural gas (CH₄)–chemical synergistic huff-and-puff method (CCHP). It utilizes the synergism between a stable foam plugging system and natural gas to supplement reservoir energy and promote the generation of secondary foamy oil. To evaluate the performance of 20 types of foam stabilizers (polymers and surfactants), elucidate the influence on production and properties of key parameters, and reveal the flow characteristics of produced fluids, 24 sets of foam performance evaluation tests were conducted using a high-temperature foam instrument. Moreover, 15 sets of core experiments with production fluid visualization were performed. The results demonstrate that, in terms of individual components, XTG and HPAM-20M demonstrated the best foam-stabilizing performance, achieving an initial foam volume of 280 mL and a foam half-life of 48 h. Conversely, the polymer–surfactant composite of XTG-CBM-DA elevated the initial foam volume to 330 mL while maintaining a comparable half-life, further enhancing the performance of foaming capacity for a stable foam system. For further application in the CCHP, oil production shows a positive correlation with both post-depletion pressure and chemical agent concentration; however, the foam gas–liquid ratio (GLR) exhibits an inflection point, with the optimal ratio found to be 1.2 m³/m³. During the huff-and-puff process, the density and viscosity of the produced oil decrease cycle by cycle, while resin and asphaltene content show a significant reduction. Furthermore, visualization results reveal that the foam becomes finer, more stable, and more uniformly distributed under precise parameter control, leading to enhanced foamy oil effects and improved plugging capacity. Moreover, the foam structure transitions from an oil-rich state to a homogeneous and stable configuration throughout the CCHP process. This study provides valuable insights for achieving stable and sustainable development in natural foamy oil reservoirs. Full article

Lignocellulosic biomass—the non-edible fraction of plants composed of cellulose, hemicellulose, and lignin—is the most abundant renewable carbon resource and a key lever for shifting from fossil to bio-based production. Agro-industrial residues (straws, cobs, shells, bagasse, brewery spent grains, etc.) offer low-cost, widely available feedstocks but are difficult to process because their polymers form a tightly integrated, three-dimensional matrix. Within this matrix, lignin provides rigidity, hydrophobicity, and defense, yet its heterogeneity and recalcitrance impede saccharification and upgrading. Today, most technical lignin from pulping and emerging biorefineries is burned for energy, despite growing opportunities to valorize it directly as a macromolecule (e.g., adhesives, foams, carbon precursors, UV/antioxidant additives) or via depolymerization to low-molecular-weight aromatics for fuels and chemicals. Extraction route and severity strongly condition lignin structure linkages (coumaryl-, coniferyl-, and sinapyl-alcohol ratios), determining reactivity, solubility, and product selectivity. Advances in selective fractionation, reductive/oxidative catalysis, and hybrid chemo-biological routes are improving yields while limiting condensation. Remaining barriers include feedstock variability, solvent and catalyst recovery, hydrogen and energy intensity, and market adoption (e.g., low-emission adhesives). Elevating lignin from fuel to product within integrated biorefineries can unlock significant environmental and economic benefits. Full article

The advancement of overall water-splitting technologies relies on the development of earth-abundant electrocatalysts that efficiently produce H₂ as a chemical fuel while offering high catalytic efficiency, structural robustness, and low-cost synthesis. Therefore, we aim to develop a cost-effective and durable non-noble electrocatalyst for overall water splitting. A straightforward hydrothermal approach was employed to fabricate freestanding polyhedral Co₃O₄ on a microporous Ni foam scaffold, followed by anion-exchange transformation in the presence of Na₂S solution to yield its conductive sulfide analog. The engineered Co₃S₄ electrode delivers remarkable HER activity in 1.0 M KOH, requiring a low overpotential (<100 mV) to drive 10 mA cm⁻², far outperforming its pristine oxide counterpart and even closely benchmarking with a commercial Pt/C catalyst. This exceptional performance is governed by the synergistic effects of enhanced electrical conductivity, abundant catalytic sites, and accelerated charge-transfer kinetics introduced through sulfur substitution. Furthermore, the optimized Co₃S₄ electrodes enable a bifunctional overall water-splitting device that achieves a cell voltage of >1.76 V at 100 mA cm⁻² and maintains prolonged operational stability for over 100 hrs. of continuous operation. Post-stability analyses confirm insignificant phase preservation during testing, ensuring sustained activity throughout the electrolysis process. This study highlights the potential of anion-exchanged Co₃S₄ as a cost-effective and durable catalyst for high-performance HER and full-cell water-splitting applications. Full article

The influence of both mixing pressure and substrate temperature on the structure and properties of spray polyurethane foams produced with a high content (80%) of tall oil-based polyol was investigated. The use of a renewable feedstock such as tall oil polyol aligns with the principles of sustainable development by reducing the carbon footprint and minimizing the environmental impact of the production process. The research focused on identifying the relationships between process parameters and the resulting materials’ thermal insulation properties, physico-mechanical performance, thermal behavior, cellular structure, and chemical composition. The results demonstrated that increasing the mixing pressure (from 12.5 to 17.5 MPa) and substrate temperature (from 40 to 55 °C) led to a reduction in average pore diameter, an increase in closed-cell content up to 94.5% and improved structural homogeneity. The thermal conductivity coefficient (λ) ranged from 18.55 to 22.30 mW·m⁻¹·K⁻¹ while apparent density varied between 44.0 and 45.5 kg·m⁻³. Higher mixing pressure positively affected compressive strength, whereas elevated substrate temperature reduced this parameter. Brittleness, water uptake, and dimensional stability remained at favorable levels and showed no significant correlation with processing conditions. These findings confirm the high quality of the materials and highlight their potential as sustainable, environmentally friendly insulation foams. Full article

This study investigates the feasibility of incorporating chemically recycled polyol (glycolysate), derived from semi-rigid polyurethane waste from the building industry, into rigid PUF formulations intended for thermal insulation applications. Glycolysis was performed using a diethylene glycol–glycerol mixture (4:1) at 185 °C in the presence of a dibutyltin dilaurate (DBTDL) catalyst. The resulting glycolysate was characterized by a hydroxyl number of 590 mg KOH/g. Foams containing 5–50% recycled polyol were prepared and described in terms of foaming kinetics, cellular structure, thermal conductivity, apparent density, mechanical performance, dimensional stability, flammability, and volatile organic compound (VOC) emissions. The incorporation of glycolysate accelerated the foaming process, with the gel time reduced from 44 s to 16 s in the sample containing 40% recycled polyol, enabling a reduction in catalyst content. The substitution of up to 40% virgin polyol with recycled polyol maintained a high closed-cell content (up to 87.7%), low thermal conductivity (λ₁₀ = 26.3 mW/(m·K)), and dimensional stability below 1%. Additionally, compressive strength improvements of up to 30% were observed compared to the reference foam (294 kPa versus 208 kPa for the reference sample). Flammability testing confirmed compliance with the B2 classification (DIN 4102), while preliminary qualitative VOC screening indicated no formation of additional harmful volatile compounds in glycolysate-containing samples compared to the reference. The results demonstrate that glycolysate can be effectively utilized in high-performance insulation materials, contributing to improved resource efficiency and a reduced carbon footprint. Full article

Hierarchically porous polymers can unite macro-scale architected voids with micro-scale pores, enabling unique combinations of low density, high surface area, and controlled transport properties that are difficult to achieve with traditional methods. This review outlines the current advancements in creating such multiscale architectures using fused filament fabrication (FFF), the most widely used polymer additive manufacturing technique. Unlike earlier reviews that consider lattice architectures and foaming chemistries separately, this work integrates both within a single analysis. It begins with an overview of FFF fundamentals and how process parameters affect macropore formation. Design strategies for achieving macroporosity (≳100 µm) with a single thermoplastic are presented and categorized: 2D infill patterns, strut-based lattices, triply periodic minimal surfaces (TPMS), and Voronoi structures, along with functionally graded approaches. The discussion then shifts to functional filaments incorporating chemical or physical blowing agents, thermally expandable or hollow microspheres, and sacrificial porogens, which create microporosity (≲100 µm) either in situ or through post-processing. Each material approach is connected to case studies that demonstrate its application. A comparative analysis highlights the advantages of each method. Key challenges such as viscosity control, thermal gradient management, dimensional instability during foaming, environmental concerns, and the absence of standardized porosity measurement techniques are addressed. Finally, emerging solutions and future directions are explored. Overall, this review provides a comprehensive perspective on strategies that enhance FFF’s capability to fabricate hierarchically porous polymer structures. Full article

Foams, as a type of porous materials, have found broad functional and structural application in heat and sound insulation, the mitigation of mechanical vibrations and impacts, packaging, etc. This paper aims to comprehensively review recently developed biobased foams (BBFs) with a comparison with their counterparts—namely, synthetic polymer foams—in terms of their foaming methods, physical and mechanical properties, and broad applications. A brief introduction to general foams, polymeric foams, and BBFs is provided, followed by a comparison of the related foaming methods; physical, mechanical, and chemical properties; and current and prospective applications. Several main polymer foaming methods (e.g., physical, chemical, and mechanical foaming) and their unique features are further examined in detail. The structure-related properties of polymeric foams (e.g., mass density, thermal conductivity, and rate effects in mechanical responses) are discussed, and the fundamental linearly viscoelastic models are summarized to account for the simple rate effect in the mechanical moduli of polymeric foams under varying loading rates. Furthermore, specific focus is placed on the foaming processes and material properties of sustainable BBFs (e.g., soybean-based, corn-based, and starch-based foams) and their potential to substitute conventional synthetic polymer foams. The technical challenges in processing BBFs are discussed, and the most promising applications of BBFs are then considered. Full article

The recycling of glass presently poses several challenges, predominantly to the heterogeneous chemical compositions of various glass types, along with the waste glass particle size distribution, both of which critically influence the efficiency and feasibility of recycling operations. Numerous studies have elucidated the potential of converting non-recyclable glass waste into valuable materials thanks to the up-cycling strategies, including stoneware, glass wool fibres, glass foams, glass-ceramics, and geopolymers. Among the promising alternatives for improving waste valorisation of glass, alkali-activated materials (AAMs) emerge as a solution. Waste glasses can be employed both as aggregates and as precursors, with a focus on its application as the sole raw material for synthesis. This overview systematically explores the optimisation of precursor selection from a sustainability standpoint, specifically addressing the mild alkali activation process (<3 mol/L) of waste glasses. The molecular mechanisms governing the hardening process associated with this emerging class of materials are elucidated. Formulating sustainable approaches for the valorisation of glass waste is becoming increasingly critical in response to the rising quantities of non-recyclable glass and growing priority on circular economy principles. In addition, the paper highlights the innovative prospects of alkali-activated materials derived from waste glass, emphasising their emerging roles beyond conventional structural applications. Environmentally relevant applications for alkali-activated materials are reported, including the adsorption of dyes and heavy metals, immobilisation of nuclear waste, and an innovative technique for hardening as microwave-assisted processing. Full article

A comprehensive overview is provided on factors and processes influencing the final quality of a cup of coffee, with an emphasis on the brewing method’s central role. Coffee quality assessment, both at the bean and cup level, combines objective parameters (color, moisture, bean defects, density) with a notable degree of subjectivity, as consumer sensory perception is ultimately decisive. The brewing technique is described as a critical determinant of the final chemical, physical, and sensory attributes. Key parameters such as aroma profile, pH, titratable acidity, total and filtered solids, lipid and fatty acid content, viscosity, foam (crema), and colorimetric indices are detailed as essential metrics in coffee quality evaluation. Roasting creates most of coffee’s key aroma compounds. The brewing method further shapes the extraction of both volatile and other bioactive compounds like caffeine, chlorogenic acids, and lipids. Brewing methods significantly affect acidity, “body,” and crema stability, while water quality, temperature, and pressure are shown to impact extraction results and sensory properties. Attention is paid to how methods such as Espresso, filter, French press, and cold brew yield distinct physicochemical and sensory profiles in the cup. Overall, the review highlights the multifaceted nature of coffee cup quality and the interplay between raw material, processing, and preparation, ultimately shaping the coffee sensory experience and market value. Full article

Proteins serve as crucial functional components in food processing, with their unique physicochemical properties directly influencing the texture and stability of food products. Proteins exhibit a range of functional properties, including emulsification, foaming, gelation, and hydration. These properties arise from the structural differences in protein molecules. To equip proteins with enhanced and diversified biological functions, researchers have developed a variety of protein modification techniques. Recent breakthroughs in artificial intelligence technologies have opened new opportunities for research on protein chemical modifications. Novel algorithms based on advanced techniques, such as deep learning, image recognition, and natural language processing, have been developed for intelligent prediction of protein modification sites. The application of these AI technologies provides innovative research tools and methodological support for rational design and targeted engineering of protein functions. This review delves into the applications of chemical modification methods aimed at improving protein solubility, emulsifying capabilities, gelation capacity, antioxidant activity, antimicrobial properties, and nutritional value. These modifications alter the structural and functional attributes of proteins, significantly enhancing their performance within food systems and expanding their application prospects in such domains as medicine and biomaterials. Full article