Search Results (5,005)

Apis mellifera L. is an important pollinator of both wild and domesticated crop plants, thus greatly contributing to plant biodiversity and commercial agriculture. However, in field conditions, honey bees remain exposed to different pesticides which ultimately affect colony health parameters and their associated ecological services. In the current study, the individual toxicities of sub-lethal doses of two distinct insecticides (bifenthrin and acetamiprid) belonging to different groups (pyrethroid and neonicotinoid) were assessed against the foraging activity, social interactions, and longevity of A. mellifera. The bees were exposed to individual doses of both insecticides via the dietary trophic route through contaminated pollen and nectar under natural field conditions. Sunflower crop (Hysun-33) was sown at nine different sites with an isolation distance of 3 km, and was treated with different doses (1/2, 1/4, 1/10, and 1/20 of the recommended field doses) of both insecticides. However, the untreated control crop plots were not subjected to any chemical treatments (bee colonies received no insecticide, and served as the baseline for making comparison). Twenty-seven bee colonies were introduced in these sites after seven days of treatment applications. Significant differences were observed in the foraging activity of A. mellifera (including bees going out from the hive, returning foragers, and those carrying pollens). The fecundity, adult longevity, and social behaviors like trophallaxis and antennation were significantly lower in bees exposed to higher individual insecticidal concentrations. However, the hatching duration, larval duration, and pupal duration were not affected by the tested insecticidal treatments. Overall, these findings demonstrate that the dietary trophic exposure of sub-lethal doses of insecticides compromised colony activities, which is indeed a matter of concern regarding the existing pesticide application methods in different agro-ecosystems. Such impacts may ultimately impair the survival of colonies, particularly when bees remain exposed to these chemicals over an extended period of time. Therefore, future studies must consider the pesticide application techniques and their application timing to mitigate the direct and indirect negative impacts of pesticides on pollinators. Full article

Per- and polyfluoroalkyl substances (PFAS) are a large group of synthetic chemicals used in daily life and industrial production. Due to their widespread use, these compounds are frequently detected in environmental samples. Many studies have shown that PFAS pose a significant threat to both ecological environments and human health, leading to widespread public concern. This study developed and optimized an analytical method for the detection of 32 common PFAS compounds in chemical additives and environmental samples, including oil displacement agents, groundwater and soil, utilizing High-Performance Liquid Chromatography–Quadrupole-Orbitrap High-Resolution Mass Spectrometry (HPLC–Q-Orbitrap HRMS) technology. Applications in an eastern Chinese oilfield revealed significant PFAS accumulation, with ∑PFAS concentrations in groundwater and soil at the well site ranging from 212.29 to 262.80 ng/L and from 23.70 to 71.65 ng/g, respectively, exceeding background levels by 10-fold. The oil displacement agents used in oilfields are one of the important sources of PFAS, particularly p-perfluorous nonenoxybenzenesulfonate (OBS), a perfluorooctanesulfonic acid (PFOS) substitute. Soil analysis indicated greater mobility of short-chain PFAS, while long-chain compounds adsorbed more readily to surface layers. Molecular docking and quantitative structure–property relationship (QSPR) modeling suggest that the bioaccumulation potential of OBS is high and comparable to that of PFOS. Zebrafish embryo assays demonstrated that OBS induced significant concentration-dependent cardiac developmental toxicity, including pericardial edema and apoptosis, showing 1.5–2.4 times greater toxicity than PFOS across multiple endpoints. These findings reveal OBS as a pervasive contaminant with elevated environmental and health risks, necessitating urgent re-evaluation of its use as a PFOS substitute. Full article

In vitro bioaccessibility tests are used to estimate the release of contaminants from environmental samples during simulated digestion, making them available for intestinal absorption. In most cases, the samples are fine-grained materials with varying chemical, physical, and mineralogical properties, but it is not always clear how these properties influence the bioaccessibility of elements. The present study focusses on the bioaccessibility of lead (Pb) and arsenic (As) in mining waste and mining-affected soils. From the literature, data from mining waste and mining-affected soil samples were used to investigate the relation between chemical (element composition, pH, organic carbon content), physical (grain size distribution), and mineralogical properties of the samples and the gastric and intestinal bioaccessibility of Pb and As. Mean gastric As bioaccessibility was significantly lower in acidic samples than neutral and alkaline samples. A significant difference was also found between As and Pb bioaccessibility in mining residues and mining-affected soil samples. Overall, total Pb an As concentrations and pH were the most significant predictors of Pb and As bioaccessibility. Due to the lack of (quantitative) mineralogical data in many papers, it was not possible to make precise predictions of As and Pb bioaccessibility based on mineralogical sample composition. Despite the challenging nature of quantitative mineralogical characterization, it can contribute to a more precise estimation of the bioavailability of Pb and As in mining waste. Given their significant impact on the bioavailability of metal(loid)s, pH and the (quantitative) mineralogical sample composition should be more systematically determined and reported. Full article

This study investigates the technological and chemical causes of early zinc-coating degradation on cold-formed steel sections produced from DX51D+Z140 galvanized coils. Commercially manufactured products exhibiting early corrosion symptoms were used in this study. The entire processing route, which included strip preparation, cold rolling, hot-dip galvanizing, passivation, multi-roll forming, storage, and transportation to customers, was analyzed with respect to the residual surface chemistry and process-related deviations that affect the coating integrity. Thirty-three specimens were examined using electromagnetic measurements of coating thickness. Statistical analysis based on the Cochran’s and Fisher’s criteria confirmed that the increased variability in zinc coating thickness is associated with a higher susceptibility to localized corrosion. Surface and chemical analysis revealed chloride contamination on the outer surface, absence of detectable Cr(VI) residues indicative of insufficient passivation, iron oxide inclusions beneath the zinc coating originating from the strip preparation, traces of organic emulsion residues impairing wetting and adhesion, and micro-defects related to deformation during roll forming. Early zinc coating degradation was shown to result from the cumulative action of multiple technological (surface damage during rolling, variation in the coating thickness) and environmental (moisture during storage and transportation) parameters. On the basis of the obtained results, a methodology was proposed to prevent steel product corrosion in industrial conditions. Full article

Phytoremediation is an eco-friendly and in situ solution for remediating heavy metal-contaminated soils, yet practical application requires timely and accurate effectiveness evaluation. However, conventional chemical analysis of plant parts and soils is labor-intensive, time-consuming and limited for large-scale monitoring. This study proposed a rapid sensing framework integrating laser-induced breakdown spectroscopy (LIBS) with deep transfer learning and spectral indices to assess phytoremediation effectiveness of Sedum alfredii (a Cd/Zn co-hyperaccumulator). LIBS spectra were collected from plant tissues and diverse soil matrices. To overcome strong matrix effects, fine-tuned convolutional neural networks were developed for simultaneous multi-matrix quantification, achieving high-accuracy prediction for Cd and Zn (R²_test > 0.99). These predicted concentrations enabled calculating conventional phytoremediation indicators like bioconcentration factor (BCF), translocation factor (TF), plant effective number (PEN), and removal efficiency (RE), yielding recovery rates near 100% for TF and PEN. Additionally, novel spectral indices (SIs)—directly derived from characteristic wavelength combinations—were constructed to bypass intermediate quantification. SIs significantly improved the direct evaluation of Zn removal and translocation. Finally, a decision-level fusion strategy combining concentration predictions and SIs enhanced Cd removal assessment accuracy. This study validates LIBS combined with intelligent algorithms as a rapid sensor tool for monitoring phytoremediation performance, facilitating sustainable environmental management. Full article

This study evaluates the bioadsorption efficiency of sugarcane bagasse (SCB) for removing pharmaceuticals and illicit drugs—such as acetaminophen, atenolol, caffeine, carbamazepine, diclofenac, orphenadrine, losartan, enalapril, citalopram, cocaine, and benzoylecgonine—from wastewater effluents. In Brazil, where 46% of the population lacks access to sewage systems, and over 5.3 billion pharmaceutical packages are consumed annually, untreated discharges contribute significantly to aquatic contamination. Results show that applying SCB biochar at a 1% (m/v) ratio removes up to 99.8% of these compounds at total concentrations of 140 ng mL⁻¹, reducing the ecological risk from high to low for caffeine and losartan. SCB offers several advantages as a bioadsorbent: it is abundant, non-toxic, inexpensive, easy to handle, and exhibits high adsorption capacity and rapid kinetics across a wide range of chemical polarities. These findings highlight SCB’s potential as a sustainable and efficient material for wastewater treatment applications. Full article

The progressive degradation of surface waters should become one of the most important problems requiring an urgent solution. One of the methods developed is filtering water through loose, degraded sediments, blooms of cyanobacteria or algae, or a bed of hemp (Cannabis sativa L.) waste or hemp fibers. The conducted tests on the percolation of water samples and/or water with sediment from surface waters at sites with different ecological statuses indicate the possibility of using hemp waste for the reclamation of water reservoirs and rivers. The effect of filtration is a rapid improvement in water quality and, consequently, an improvement in the ecological status. The best result was achieved for a small freshwater reservoir with a large number of algae and loose degraded sediment. The initial turbidity value was at the limit of the device’s measurement capability, reaching 9991 NTU. After filtration through the hemp waste bed, the turbidity dropped to 42.52 NTU, a 99.57% decrease. The remaining parameters, C, TDS, and pH, were not subject to significant variability as a result of filtering. Excessive amounts of organic matter, which create a problem for surface waters, are removed. Due to the carrier (hemp waste), which is organic waste, any possible release of small amounts into the aquatic environment will not pose a threat. After applying filtration, a decision can be made on further actions regarding the water reservoir or river: Self-renewal of the reservoir or further percolation using, for example, mill gauze or cleaning the reservoir with other, non-invasive methods. After the filtering procedure, the hemp waste, enriched with organic matter and water remaining in the waste, can be used for composting or directly for soil mulching (preliminary tests have yielded positive results). A hemp waste filter effectively removes Chronomus aprilinus larvae (Chrinomidae) from water. This result indicates the possibility of removing mosquito larvae in malaria-affected areas. The use of hemp filters would reduce the amount of toxic chemicals used to reduce mosquito larvae. Improving the ecological status of surface waters by filtering contaminants with hemp waste filters can reduce the need for chemical treatment. The use of natural, biological filters enables sustainable surface water management. This is crucial in today’s rapidly increasing chemical pollution of surface waters. Full article

Glass wool waste constitutes a rapidly increasing fraction of construction and demolition residues, yet it remains one of the most challenging insulation materials to recycle. Its non-combustible nature, extremely low bulk density, and high fibre elasticity preclude energy recovery and severely limit conventional mechanical recycling routes, resulting in long-term landfilling and loss of mineral resources. Converting glass wool waste into a fine mineral powder represents a potentially viable pathway for its integration into low-carbon construction materials, provided that industrial scalability, particle-size control, and chemical compatibility with cementitious binders are ensured. This study investigates the industrial-scale milling of end-of-life glass wool waste in a ventilated horizontal ball mill. It compares two grinding routes: a corundum-free route (BK) and an abrasive-assisted route (ZK) employing α-Al₂O₃ corundum to intensify fibre fragmentation. Particle size distribution was quantified by laser diffraction using cumulative and differential analyses, as well as characteristic diameters. The results confirm that abrasive-assisted milling significantly enhances fragmentation efficiency and reduces the coarse fibre fraction. However, the study demonstrates that this gain in fineness is inherently coupled with the incorporation of α-Al₂O₃ into the milled powder, introducing a chemically foreign crystalline phase that cannot be removed by post-processing. From a cement-oriented perspective, this contamination represents a critical limitation, as α-Al₂O₃ may interfere with hydration reactions, aluminate–sulfate equilibria, and microstructural development in Portland and calcium sulfoaluminate binders. In contrast, the corundum-free milling route yields a slightly coarser, chemically unmodified powder, offering improved process robustness, lower operational complexity, and greater compatibility with circular economy objectives. The study establishes that, for the circular reuse of fibrous insulation waste in cementitious systems, particle fineness alone is insufficient as an optimization criterion. Instead, the combined consideration of fineness, chemical purity, and binder compatibility governs the realistic and sustainable reuse potential of recycled glass wool powders. Full article

Cadmium (Cd) contamination in agricultural systems poses significant ecotoxicological risks through bioaccumulation in food chains. While lime-based amendments are widely applied for Cd immobilization, mechanistic understanding of bioavailability control pathways remains limited. This study employed a meta-analysis methodology based on 260 datasets from 55 publications to systematically investigate the mechanisms and differences in the effectiveness of calcium hydroxide, calcium carbonate, and calcium oxide in regulating Cd migration in acidic soil–plant systems. The study revealed that lime-based materials synergistically regulated Cd migration through two processes: chemical fixation and ionic competition. Results showed lime application reduced soil available Cd by 33.0%, decreased grain Cd by 44.8%, increased soil pH by 15.6%, and enhanced exchangeable Ca by 35.2%. Chemical fixation was evidenced by Cd transformation from labile to stable forms (residual Cd: +29.5%, acid-soluble Cd: −17.5%). Ionic competition was quantitatively confirmed through strong negative correlation between exchangeable Ca and grain Cd (R² = 0.704). Among the materials, Ca(OH)₂ exhibits the highest efficiency in rapid pedogenic passivation (58.7% reduction in available Cd), whereas CaCO₃ demonstrates superior long-term grain Cd attenuation (65.7% inhibition) via sustained Ca²⁺ release and rhizosphere-regulated dissolution. This study advances mechanistic understanding of Cd bioavailability control and establishes quantitative frameworks for predicting ecotoxicological outcomes, providing scientific basis for optimizing remediation strategies to minimize Cd transfer through agricultural food chains. Full article

The global food industry is undergoing a major shift driven by increasing consumer demand for clean-label and naturally preserved foods. Fresh pasta is highly vulnerable to fungal damage because of its high water activity (a_w > 0.85), typically ranging between 0.92 and 0.97, moderate to near-neutral pH (around 5.0–7.0), and nutrient-rich composition, all of which create favorable conditions for fungal growth during refrigeration, mainly by genera such as Penicillium and Aspergillus. Fungal contamination results in significant economic losses due to reduced product quality and poses potential health risks associated with mycotoxin production. Although conventional chemical preservatives are relatively effective in preventing spoilage, their use conflicts with clean-label trends and faces growing regulatory and consumer scrutiny. In this context, antifungal lactic acid bacteria (LAB) have emerged as a promising natural alternative for biopreservation. Several LAB strains, particularly those isolated from cereal-based environments (e.g., Lactobacillus plantarum and L. amylovorus), produce a broad spectrum of antifungal metabolites, including organic acids, phenylalanine-derived acids, cyclic dipeptides, and volatile compounds. These metabolites act synergistically to inhibit fungal growth through multiple mechanisms, such as cytoplasmic acidification, energy depletion, and membrane disruption. However, the application of LAB in fresh pasta production requires overcoming several challenges, including the scale-up from laboratory to industrial processes, the maintenance of metabolic activity within the complex pasta matrix, and the preservation of desirable sensory attributes. Furthermore, regulatory approval (GRAS/QPS status), economic feasibility, and effective consumer communication are crucial for successful commercial implementation. This review analyzes studies published over the past decade on fresh pasta spoilage and the antifungal activity of lactic acid bacteria (LAB), highlighting the progressive refinement of LAB-based biopreservation strategies. The literature demonstrates a transition from early descriptive studies to recent research focused on strain-specific mechanisms and technological integration. Overall, LAB-mediated biopreservation emerges as a sustainable, clean-label approach for extending the shelf life and safety of fresh pasta, with future developments relying on targeted strain selection and synergistic preservation strategies. Full article

Brake dust (BD) generated by vehicle braking systems, including those of cars and trains, contains various Potentially Toxic Elements (PTEs) that may pose risks to human health and the environment, particularly in soils where it accumulates. This study aims to evaluate differences in the chemical composition of BD emitted by road and railway transport, to analyze its deposition mechanisms in soil, and to estimate the associated carcinogenic (CR) and non-carcinogenic (HQ) risks from ingestion and dermal exposure. Two sites were selected: one adjacent to a busy roadway and the other near a railway line. At both locations, soil-sampling transects were established perpendicular to the emission sources at distances of 3, 6, 15, 25, and 45 m. Elemental concentration analyses were integrated with magnetic measurements, which are selective for magnetic iron oxide particles. The results confirm elevated concentrations of several metals at both sites. Both elemental and magnetic data reveal a clear deposition gradient, with the highest accumulation within 15 m of the source, followed by a gradual stabilization up to 45 m. However, the railway site exhibited significantly higher concentrations than the road site, highlighting the relevance of non-exhaust emissions (NEEs) from railway traffic, which remain poorly investigated. While HQ was non-significant, CR associated with Pb-, Ni-, and As-rich BD exceeded acceptable threshold values, particularly for ingestion exposure at the railway site. These results highlight the significance of NEEs from rail traffic in terms of soil contamination and risk assessment. Full article

Excessive application of chemical fertilisers has led to soil phosphorus immobilisation and aquatic eutrophication, making the development of highly efficient acid/neutral phosphatases crucial for sustainable phosphorus utilisation. In this study, we systematically investigated strain J2, which was isolated from phosphate-contaminated soil in Laoshan, Nanjing, China. 16S rRNA gene sequence analysis identified this strain as Acinetobacter nosocomialis J2, with 99.78% sequence similarity. Whole-genome sequencing generated a 3.83 Mb genome with a GC content of 38.59%, revealing multiple phospho-metabolism-related enzyme genes, including phospholipase C and α/β-hydrolases. A large language model–based protein representation learning strategy was employed to mine acid/neutral phosphatase genes from the genome, in which the model learned contextual and functional features from known phosphatase sequences and was used to identify semantically similar genes within the J2 genome. This approach predicted nine phosphatase candidate sequences, including AnACPase, a putative acid/neutral phosphatase. Biochemical characterisation showed that AnACPase exhibits optimal activity at pH 6.0 and 50 °C, with a K_m value of 0.2454 mmol/L for the p-NPP substrate, indicating high substrate affinity. Mn²⁺ and Ni²⁺ significantly enhanced enzyme activity, whereas Cu²⁺ and Zn²⁺ strongly inhibited it. Soil remediation experiments further validated the application potential of AnACPase, which solubilised 171.56 mg/kg of phosphate within seven days. Overall, this study highlights the advantages of deep learning-assisted genome mining for functional enzyme discovery and provides a novel technological pathway for the bioremediation of phosphorus-polluted soils. Full article

Chemical contaminants are increasingly detected in freshwater environments, yet the physiological and molecular responses of many non-model freshwater invertebrates to acute chemical stress remain poorly understood. In this study, we investigated the physiological and transcriptomic responses of the freshwater hydrozoan Craspedacusta sowerbii to two widespread aquatic pollutants: the antibiotic sulfamethoxazole (20 μM) and the heavy metal salt CdSO₄ (10 μM). Morphological and behavioral observations showed that sulfamethoxazole exposure led to reduced motility and body shrinkage, whereas cadmium exposure caused rapid loss of movement and complete mortality within 24 h. RNA sequencing revealed distinct transcriptional response patterns to the two stressors. Sulfamethoxazole exposure primarily induced the up-regulation of genes associated with oxidative stress, apoptosis, immune responses, and signaling pathways, suggesting an active but limited stress-adaptation response. In contrast, cadmium exposure resulted in extensive down-regulation of genes involved in metabolic pathways, cell cycle regulation, fatty acid metabolism, and anti-aging processes, suggesting severe disruption of core metabolic processes. Comparative pathway analyses identified both shared stress-related responses and pollutant-specific transcriptional signatures, with cadmium exerting markedly stronger inhibitory effects at both physiological and molecular levels. These results reveal clear thresholds of stress tolerance and response failure in C. sowerbii under chemical pollution, and highlight its ecological sensitivity to water quality deterioration. Together, these findings provide mechanistic insight into acute pollutant-induced stress responses in a freshwater Cnidarian and offer a useful reference for understanding how freshwater invertebrates respond to short-term chemical disturbances. Full article

Microplastics (MPs) are pervasive environmental pollutants, widely distributed from aquatic ecosystems to the terrestrial food chain, and represent a potential route of human exposure. Although several reviews have addressed MP contamination, a critical synthesis focusing on pathways through which consumer goods directly enter food and beverages, along with corresponding industry and regulatory responses, is lacking. This review fills this gap by proposing the direct release of MPs from common sources such as food packaging, kitchen utensils, and household appliances, linking the release mechanisms to human health risks. The release mechanisms of MPs under thermal stress, mechanical abrasion, chemical leaching, and environmental factors, as well as a risk-driven framework for MP release, are summarized. Human exposure through ingestion is the predominant route, while inhalation and dermal contact are additional pathways. In vitro and animal studies have associated MP exposure to inflammatory responses and oxidative stress, neurotoxicity, and genomic instability as endpoints, though direct causal evidence in humans remains lacking, and extrapolation from model systems necessitates caution. This review revealed that dietary intake from kitchen sources is the primary pathway for MP exposure, higher than the inhalation pathway. Most importantly, this review critically sheds light on the initiatives that should be taken by industries with respect to global strategies and new policies to alleviate these challenges. However, while there has been an upsurge in research commenced in this area, there are still research gaps that need to be addressed to explore food matrices such as dairy products, meat, and wine in the context of the supply chain. In conclusion, we pointed out the challenges that limit this research with the aim of improving standardization; research approaches and a risk assessment framework to protect health; and the key differences between MP and nanoplastic (NP) detection, toxicity, and regulatory strategies, underscoring the need for size-resolved risk assessments. Full article

ISO 22002-100:2025 introduces stringent and more technically explicit prerequisite programme (PRP) requirements for allergen management, food fraud mitigation, and the control of chemical and packaging-related contaminants across the food, feed, and packaging supply chain. This review examines how advanced chromatographic methods provide the analytical basis required to meet these requirements and to support alignment with GFSI-recognized certification schemes. Recent applications of liquid and gas chromatography coupled with mass spectrometry for allergen quantification, authenticity assessment, and the determination of packaging migrants, auxiliary chemical residues, lubricants, and indoor pest-control pesticides are presented to demonstrate their relevance as verification tools. Across these PRP-related controls, chromatographic methods enable trace-level detection, structural specificity, and reproducible measurement performance, thereby shifting PRP compliance from a documentation-based activity to a process verified through measurable analytical evidence. The review highlights significant progress in method development and simultaneous multi-target analytical approaches while also identifying remaining challenges related to matrix-appropriate validation, harmonization, and analytical coverage for chemical contamination, which is now formally defined as a measurable PRP requirement under ISO 22002-100:2025. Overall, the findings demonstrate that chromatographic analysis has become essential to demonstrating PRP effectiveness under ISO 22002-100:2025, supporting the broader shift toward evidence-based, scientifically robust food safety assurance. Full article