Search Results (58)

This work presents a sustainable strategy for the fabrication of multifunctional silver nanoparticles (Ag-NPs) and Ag/jute nanocomposites using Erythroxylum coca tea waste extract as a bioreducing and stabilizing agent, combined with picosecond pulsed laser irradiation. UV–Vis spectroscopy and transmission electron microscopy revealed the formation of Ag-NPs with diverse morphologies and broad size distributions, which became significantly more uniform after laser post-treatment without the need for additional chemical reagents. Following laser irradiation, the initially broad Ag surface plasmon resonance (SPR) peak transformed into a symmetric Gaussian-shaped band, centered at 407 ± 3 nm for all the Ag-NPs systems. The catalytic performance of unsupported Ag-NPs and Ag-NPs supported on jute fibers was comparatively evaluated by degrading Congo red (CR) dye, revealing that the supported nanocomposites exhibited enhanced catalytic stability, higher pollutant removal efficiency, and improved catalyst recovery. Furthermore, multicomponent catalytic reduction experiments involving CR and 4-nitrophenol (4-NP) in the presence of NaBH₄ revealed simultaneous degradation and reduction pathways mediated by the Ag/jute nanocomposites, as evidenced by the emergence of new absorption bands during the reaction. In parallel, the synthesized Ag-NPs demonstrated pronounced antimicrobial activity against Escherichia coli, generating well-defined inhibition zones. Beyond conventional approaches centered on nanoparticle synthesis and morphology optimization, this study establishes a platform that combines agricultural waste valorization, laser-assisted nanoparticle engineering, and natural-fiber-supported nanocomposite fabrication, enabling efficient remediation of both single- and multicomponent pollutant systems while promoting catalyst reusability and environmental sustainability. These findings demonstrate the Ag/jute nanocomposites as sustainable and scalable catalytic materials for wastewater remediation and antimicrobial applications. Full article

This study explored the eco-friendly synthesis of AgNPs using Prosopis laevigata seed mucilage and assessed their antimicrobial, antibiofilm, and biocompatibility effects against foodborne pathogens. The AgNPs were mostly spherical, with sizes ranging from 2.5 to 56 nm (average: 14.69 nm), as confirmed by XRD and DLS analysis. They showed consistent antimicrobial activity, with MICs at 0.5 mg/mL and MBCs at 1.0 mg/mL across all tested strains, and inhibited bacterial growth by over 75% at 0.5–5 mg/mL, similar to or better than gentamicin. The antibiofilm performance was notable, with inhibitions of 76–84% against E. coli (1–10 mg/mL), 96–98% against S. aureus (0.5–10 mg/mL), 76–82% against Salmonella Typhimurium (0.5–10 mg/mL), and 70–84% against P. aeruginosa (1–10 mg/mL), surpassing gentamicin against E. coli and P. aeruginosa. Cell viability remained 100% at 0.25 mg/mL, and no significant changes in immunological parameters were observed, suggesting good biocompatibility at therapeutic doses. This research shows, for the first time, that P. laevigata mucilage is an effective bioreducing agent for green synthesis of AgNPs with antimicrobial and antibiofilm activity against both Gram-negative and Gram-positive foodborne pathogens. Its superior ability to inhibit biofilms compared to traditional antibiotics, along with its safety profile at therapeutic levels, makes these nanoparticles promising for food safety applications, antimicrobial coatings, and topical treatments. Overall, the findings support the use of native plant resources in green nanotechnology to address global challenges of antimicrobial resistance. Full article

In this paper, the interaction between caking bituminous coal (HC) and two types of biomass, namely sunflower husks (SFHs) and walnut shells (WSs), was studied via lab-scale fixed-bed reactor experiments and thermogravimetric analysis (TGA). The dynamics of volatile matter composition and weight loss changes were analyzed for the initial biomass types and their 1:1 blends with HC during co-pyrolysis. Derivative thermogravimetry (DTG) revealed that during the co-pyrolysis of HC with biomass, the number of reaction stages increased to four, compared to three during individual pyrolysis, indicating synergistic thermal behavior. The apparent activation energy (E_a) of the blends was higher (62.8 kJ/mol for SFH/HC and 61.8 kJ/mol for WS/HC) than that of the individual HC (55.1 kJ/mol), SFHs (43.8 kJ/mol), and WSs (52.4 kJ/mol), confirming intensified reaction complexity. Co-pyrolysis resulted in higher methane (CH₄) production, with the CH₄:HAc (acetic acid) ratio increasing from 1.2 (WSs) and 1.7 (SFHs) to 1.9 (WS/HC) and 3.3 (SFH/HC). The non-additive behavior of blends is established, indicating the interactions between biomass and HC during co-pyrolysis. These findings support a more resilient and sustainable approach to producing fuels and reducing agents, particularly through the utilization of agricultural residues and waste biomass. Full article

In this work, we report a green synthesis of zinc oxide (ZnO) nanoparticles using aqueous and ethanolic extracts of Tradescantia spathacea (purple maguey) as bioreducing and stabilizing agents, which are plant extracts not previously employed for metal oxide nanoparticle synthesis. This method provides an efficient, eco-friendly, and reproducible route to obtain ZnO nanoparticles, while minimizing environmental impact compared to conventional chemical approaches. The extracts were prepared following a standardized protocol, and their phytochemical profiles, including total phenolics, flavonoids, and antioxidant capacity, were quantified via UV-Vis spectroscopy to confirm their reducing potential. ZnO nanoparticles were synthesized using zinc acetate dihydrate as a precursor, with variations in pH and precursor concentration in both aqueous and ethanolic media. UV-Vis spectroscopy confirmed nanoparticle formation, while X-ray diffraction (XRD) revealed a hexagonal wurtzite structure with preferential (101) orientation and lattice parameters a = b = 3.244 Å, c = 5.197 Å. Scanning electron microscopy (SEM) showed agglomerated morphologies, and Fourier transform infrared spectroscopy (FTIR) confirmed the presence of phytochemicals such as quercetin, kaempferol, saponins, and terpenes, along with Zn–O bonding, indicating surface functionalization. Zeta potential measurements showed improved dispersion under alkaline conditions, particularly with ethanolic extracts. This study presents a sustainable synthesis strategy with tunable parameters, highlighting the critical influence of precursor concentration and solvent environment on ZnO nanoparticle formation. Notably, aqueous extracts promote ZnO synthesis at low precursor concentrations, while alkaline conditions are essential when using ethanolic extracts. Compared to other green synthesis methods, this strategy offers control and reproducibility and employs a non-toxic, underexplored plant source rich in phytochemicals, potentially enhancing the crystallinity, surface functionality, and application potential of the resulting ZnO nanoparticles. These materials show promise for applications in photocatalysis, in antimicrobial coatings, in UV-blocking formulations, and as functional additives in optoelectronic and environmental remediation technologies. Full article

The metallurgical industry has been constantly changing over the past decades. On the one hand, there has been the modernization and improvement of production efficiency, and on the other hand, we have seen a reduction in the negative impact on the environment. The possibility of using alternative materials and the circular economy is significant in this area. In the present work, research was carried out to determine the usefulness of biomass in the form of fruit seeds for the recycling processes of metal-bearing raw materials, including slags from copper production processes, which are characterized by a much higher metal content than ores of this metal. The main carbon-bearing material/reducer used in the process is metallurgical coke. The transformation of the European metal industry has been observed in recent years. To carry out the physicochemical characterization of the tested material, a research methodology was adopted using tools to determine the stability of behavior at high temperatures, chemical composition, and volatile components. Thermodynamic analysis was carried out, indicating the theoretical course of reactions of individual system components and thermal effects, allowing a determination of whether the assumed reactions are endothermic or exothermic. The planned research ends with the reduction process in conditions similar to those carried out in industrial conditions. Enforced by the guidelines for reducing CO₂ emissions, it contributes to a significant reduction in the demand for coke. This paper addresses the issue of determining the feasibility of using selected bioreducers, including cherry stones, to verify their suitability in the process of reducing copper oxides. The study used copper slag with a composition similar to slags generated at the copper production stage in a flash furnace. The results obtained in reducing copper content above 98 wt. % indicate the great potential of this type of bioreducer. It should be noted that, unlike conventional fossil fuels, the use of cherry stones to reduce copper slag can be considered an environmentally neutral method of carbon offset. The resulting secondary slag is a waste product that can be stored and disposed of without harmful environmental effects due to its low lead content. An additional advantage is the relatively wide availability of cherry stones. Full article

The green synthesis of metal nanoparticles, mediated by extracts from various biological sources, leads to the formation of nanoparticles with unique characteristics and potential biomedical applications. In this study, a fraction of the mucus from the snail Cornu aspersum with MW > 20 kDa was used as a bioreducing and biostabilizing agent to obtain silver nanoparticles (AgNPs) in different pH media (pH 1.5, 3.5, and 7.0). The AgNPs were characterized using UV-visible spectroscopy, SEM, TEM, XRD, and FTIR. The synthesis at pH 1.5 and pH 3.5 in the presence of two reducing agents (i.e., the C. aspersum mucus fraction with MW > 20 kDa and ascorbic acid [AsA]) resulted in the formation of well-formed spherical nanoparticles (NPs) with larger sizes (20–80 nm) than the NPs obtained at pH 7.0 (20–60 nm) in the presence of only one reducing agent. Furthermore, the biosynthesized AgNPs significantly inhibited the growth of medically significant pathogens such as Gram-positive (Bacillus subtilis NBIMCC2353, Bacillus spizizenii ATCC 6633, Staphylococcus aureus ATCC 6538, and Listeria innocua NBIMCC8755) and Gram-negative (Escherichia coli ATCC8739, Salmonella enteitidis NBIMCC8691, Salmonella typhimurium ATCC 14028, Stenotrophomonas maltophilia ATCC 17666) bacteria compared to output mucus. Full article

Copper production technology is a complex process consisting of many stages. The combination of pyrometallurgical and hydrometallurgical stages, on the one hand, complicates production while, on the other hand, allowing for a relatively selective separation of intermediate or waste materials that can be subjected to the process of recovery of useful components. Materials of this type are characterised by a much higher copper content relative to the ore material. On the other hand, due to the oxide form, reduction processes are used in which coke is mainly applied. Reduction of the unfavourable phenomenon of CO₂ emissions, in this case, can be performed through the use of bioreducers, which are characterised by an inert carbon footprint since the generation of carbon dioxides is the same as its absorption at the stage of vegetation and growth. In this paper, the topic of determining the feasibility of using selected bioreducers, such as peanut shells, to verify their suitability in the process of reducing copper oxides as well as the impact on the working components of the laboratory reactor in which the process is carried out are discussed. In this case, raw materials with a composition similar to the that of slags produced at the copper production stage in a flash furnace were tested for reduction. The results referring to reducing lead and copper contents above 88% Pb and 98% Cu indicate the great potential of this type of bioreducer. An additional advantage is the relatively wide availability of peanut resources. The effects of the copper reduction time on the degree of decopperisation performed with a constant reducer addition at 1300 °C were studied in this paper. Following 1 h of the process, the copper content in the slag was 0.78 wt%, while the longer process duration resulted in a copper fraction of 0.19 wt%. Considering lead, its content was 0.33 wt% after the reduction process. Full article

Synthesis of silver nanoparticles with antibacterial properties using a one-pot green approach that harnesses the natural reducing and capping properties of cinnamon (Cinnamomum verum) bark extract is presented in this work. Silver nitrate was the sole chemical reagent employed in this process, acting as the precursor salt. Gas Chromatography-Mass Spectroscopy (GC-MS), High-Performance Liquid Chromatography (HPLC) analysis, and some phytochemical tests demonstrated that cinnamaldehyde is the main component in the cinnamon bark extract. The resulting bio-reduced silver nanoparticles underwent comprehensive characterization by Ultraviolet–Vis (UV-Vis) and Fourier Transform InfraRed spectrophotometry (FTIR), Dynamic Light Scattering (DLS), Transmission Electron Microscopy, and Scanning Electron Microscopy suggesting that cinnamaldehyde was chemically oxidated to produce silver nanoparticles. These cinnamon-extract-based silver nanoparticles (AgNPs-cinnamon) displayed diverse morphologies ranging from spherical to prismatic shapes, with sizes spanning between 2.94 and 65.1 nm. Subsequently, the antibacterial efficacy of these nanoparticles was investigated against Klebsiella, E. Coli, Pseudomonas, Staphylococcus aureus, and Acinetobacter strains. The results suggest the promising potential of silver nanoparticles obtained (AgNPs-cinnamon) as antimicrobial agents, offering a new avenue in the fight against bacterial infections. Full article

Several biologically active compounds involved in the green synthesis of silver and gold nanoparticles have been isolated from snail mucus and characterized. This paper presents a successful method for the application of snail mucus from Cornu aspersum as a bioreducing agent of copper sulfate and as a biostabilizer of the copper oxide nanoparticles (CuONPs-Muc) obtained. The synthesis at room temperature and neutral pH yielded nanoparticles with a spherical shape and an average diameter of 150 nm. The structure and properties of CuONPs-Muc were characterized using various methods and techniques, such as ultraviolet–visible spectroscopy (UV–vis), high-performance liquid chromatography (HPLC), one-dimensional polyacrylamide gel electrophoresis (1D-PAGE), up-conversion infrared spectroscopy Fourier transform (FTIR), scanning electron microscopy combined with energy dispersive spectroscopy (SEM/EDS), Raman spectroscopy and imaging, thermogravimetric analysis (TG-DSC), etc. Mucus proteins with molecular weights of 30.691 kDa and 26.549 kDa were identified, which are involved in the biogenic production of CuONPs-Muc. The macromolecular shell of proteins formed around the copper ions contributes to a higher efficiency of the synthesized CuONPs-Muc in inhibiting the bacterial growth of several Gram-positive (Bacillus subtilis NBIMCC2353, Bacillus spizizenii ATCC 6633, Staphylococcus aureus ATCC 6538, Listeria innocua NBIMCC8755) and Gram-negative (Escherichia coli ATCC8739, Salmonella enteitidis NBIMCC8691, Salmonella typhimurium ATCC 14028, Stenotrophomonas maltophilia ATCC 17666) bacteria compared to baseline mucus. The bioorganic synthesis of snail mucus presented here provides CuONPs-Muc with a highly pronounced antimicrobial effect. These results will expand knowledge in the field of natural nanomaterials and their role in emerging dosage forms. Full article

Xanthohumol (Xn), a prenylated chalcone found in Hop (Humulus lupulus L.), has been shown to have potent anti-aging, diabetes, inflammation, microbial infection, and cancer properties. Unfortunately, this molecule has undesirable characteristics such as inadequate intake, low aqueous solubility, and a short half-life. To address these drawbacks, researchers have made numerous attempts to improve its absorption, solubility, and bioavailability. Polymeric drug delivery systems (PDDSs) have experienced significant development over the last two decades. Polymeric drug delivery is defined as a formulation or device that allows the introduction of a therapeutic substance into the body. Biodegradable and bioreducible polymers are the ideal choice for a variety of new DDSs. Xn formulations based on biodegradable polymers and naturally derived compounds could solve some of the major drawbacks of Xn-based drug delivery. In this regard, the primary concern of this study is on presenting innovative formulations for Xn delivery, such as nanoparticles (NPs), nanomicelles, nanoliposomes, solid lipid nanoparticles (SLNs), and others, as well as the received in vitro and in vivo data. Furthermore, this work describes the chemistry and broad biological activity of Xn, which is particularly useful in modern drug technology as well as the cosmetics industry. It is also important to point out that the safety of using Xn, and its biotransformation, pharmacokinetics, and clinical applications, have been thoroughly explained in this review. Full article

From the traditional Chinese medicine point of view, although Houttuynia cordata extract (HCE) possesses an incredible amount of phytonutrients and exhibits antioxidant activities, excessive doses of HCE can cause danger to organisms and lead to death. In this study, we first examine HCE’s overall phenolic and flavonoid content, antioxidant efficacy, and antibacterial activity. Results show that HCE is suitable as a bio-reducing agent for the microwave-assisted synthesis of silver nanoparticles (HCE-AgNPs) with enhanced antioxidant and antimicrobial performance. Under an optimized microwave condition (i.e., 100 °C for 10 min), the HCE-stabilized AgNPs were confirmed with a UV-visible peak at 430 nm and 19.7 ± 4.2 nm in size. Physicochemical properties of HCE-AgNPs were extensively characterized by zeta-potential, FT-IR, XRD, and XPS measurements. Compared to the HC extract counterpart, HCE-AgNPs display superior antioxidant activity, higher DPPH scavenging efficiency, and enhanced broad-spectrum bactericidal activity to inhibit the growth of all tested bacterial strains at doses of 2 μg/mL. Biosafety evaluation indicated that HCE-AgNPs are noncytotoxic on human red blood cells. These data show that the microwave synthesis of AgNPs exhibits a great antioxidant ability, superior antibacterial activity, and a trivial hemolytic effect, providing another bactericidal therapy strategy to address the increasing healthcare-associated infections. Full article

Polymeric drug delivery technology, which allows for medicinal ingredients to enter a cell more easily, has advanced considerably in recent decades. Innovative medication delivery strategies use biodegradable and bio-reducible polymers, and progress in the field has been accelerated by future possible research applications. Natural polymers utilized in polymeric drug delivery systems include arginine, chitosan, dextrin, polysaccharides, poly(glycolic acid), poly(lactic acid), and hyaluronic acid. Additionally, poly(2-hydroxyethyl methacrylate), poly(N-isopropyl acrylamide), poly(ethylenimine), dendritic polymers, biodegradable polymers, and bioabsorbable polymers as well as biomimetic and bio-related polymeric systems and drug-free macromolecular therapies have been employed in polymeric drug delivery. Different synthetic and natural biomaterials are in the clinical phase to mitigate different diseases. Drug delivery methods using natural and synthetic polymers are becoming increasingly common in the pharmaceutical industry, with biocompatible and bio-related copolymers and dendrimers having helped cure cancer as drug delivery systems. This review discusses all the above components and how, by combining synthetic and biological approaches, micro- and nano-drug delivery systems can result in revolutionary polymeric drug and gene delivery devices. Full article

In the present research, Livistona chinensis leaf extracts were utilized as reductants to bio-fabricate silver nanoparticles (LC-AgNPs) and this was followed by the evaluation of their antioxidant, antibacterial, and anticancer potential. Multiple parameters were optimized for the formation and fidelity of LC-AgNPs. The color shift of the reaction mixture from yellow to dark brown confirmed the LC-AgNPs formation. UV/VIS spectroscopy exhibited a surface plasmon resonance (SPR) band at 436 nm. The Fourier transform infrared (FTIR) spectroscopy spectrum depicted phytochemicals in the plant extract acting as bio-reducers for LC-AgNPs synthesis. The XRD pattern confirmed the presence of LC-AgNPs by showing peaks corresponding to 2θ angle at 8.24° (111), 38.16° (200), 44.20° (220), and 64.72° (311). Zetasizer analysis exhibited size distribution by intensity of LC-AgNPs with a mean value of 255.7 d. nm. Moreover, the zeta potential indicated that the AgNPs synthesized were stable. The irregular shape of LC-AgNPs with a mean average of 38.46 ± 0.26 nm was found by scanning electron microscopy. Furthermore, the antioxidant potential of LC-AgNPs was examined using a DPPH assay and was calculated to be higher in LC-AgNPs than in leaf extracts. The calculated IC₅₀ values of the LC-AgNPs and plant extract are 85.01 ± 0.17 and 209.44 ± 0.24, respectively. The antibacterial activity of LC-AgNPs was investigated against Escherichia coli, Pseudomonas aeruginosa, and Bacillus subtilis as well as Staphylococcus aureus, and maximum potential was observed after 24 h against P. aeruginosa. Moreover, LC-AgNPs exhibited maximum anticancer potential against TPC1 cell lines compared to the plant extract. The findings suggested that LC-AgNPs could be used as antioxidant, antibacterial, and anticancer agents for the cure of free-radical-oriented bacterial and oncogenic diseases. Full article

Hypoxia, a deficiency in the levels of oxygen, is a common feature of most solid tumors and induces many characteristics of cancer. Hypoxia is associated with metastases and strong resistance to radio- and chemotherapy, and can decrease the accuracy of cancer prognosis. Non-invasive imaging methods such as positron emission tomography (PET) and single-photon emission computed tomography (SPECT) using hypoxia-targeting radiopharmaceuticals have been used for the detection and therapy of tumor hypoxia. Nitroimidazoles are bioreducible moieties that can be selectively reduced under hypoxic conditions covalently bind to intracellular macromolecules, and are trapped within hypoxic cells and tissues. Recently, there has been a strong motivation to develop PET and SPECT radiotracers as radiopharmaceuticals containing nitroimidazole moieties for the visualization and treatment of hypoxic tumors. In this review, we summarize the development of some novel PET and SPECT radiotracers as radiopharmaceuticals containing nitroimidazoles, as well as their physicochemical properties, in vitro cellular uptake values, in vivo biodistribution, and PET/SPECT imaging results. Full article