Search Results (107)

Hierarchical surface structuring is a critical aspect of advanced materials design, impacting fields ranging from optics to biomimetics. Among several laser-based methods for complex structuring of photo-responsive surfaces, the broadband vectorial interferometry proposed here offers unique performances. Such a method leverages a polychromatic laser source, an unconventional choice for holographic encoding, to achieve deterministic multiscale surface structuring through interference light patterning. Azopolymer films are used as photosensitive substrates. By exploring the interaction between optomechanical stress modulations at different spatial periodicities induced within the polymer bulk, we demonstrate the emergence of hierarchical Fourier surfaces composed of multiple deterministic levels. These structures range from sub-micrometer to tens of micrometers scale, exhibiting a high degree of control over their morphology. The experimental findings reveal that the optical encoding scheme significantly influences the resulting topographies. The polarization light patterns lead to more regular and symmetric hierarchical structures compared to those obtained with intensity patterns, underscoring the role of vectorial light properties in controlling surface morphologies. The proposed method is fully scalable, compatible with more complex recording schemes (including multi-beam interference), and it is applicable to a wide range of advanced technological fields. These include optics and photonics (diffractive elements, polarimetric devices), biomimetic surfaces, topographical design, information encoding, and anti-counterfeiting, offering a rapid, reliable, and versatile strategy for high-precision surface structuring at a submicrometric scale. Full article

In this paper, a series of polyaniline (PANI)/Ti₃C₂ MXene composites (PMCs) with a biomimetic structure were prepared and employed as an anticorrosion coating application. First, the PANI was synthesized by oxidative polymerization with ammonium persulfate as the oxidant. Then, 2D Ti₃C₂ MXene nanosheets were prepared by treating the Ti₃AlC₂ using the optimized minimally intensive layer delamination (MILD) method, followed by characterization via XRD and SEM. Subsequently, the PMC was prepared by the oxidative polymerization of aniline monomers in the presence of Ti₃C₂ MXene nanosheets, followed by characterization via FTIR, XRD, SEM, TEM, CV, and UV–Visible. Eventually, the PMC coatings with the artificial biomimetic surface structure of a macaw feather were prepared by the nano-casting technique. The corrosion resistance of the PMC coatings, evaluated via Tafel polarization and Nyquist impedance measurements, shows that increasing the MXene loading up to 5 wt % shifts the corrosion potential (E_corr) on steel from −588 mV to −356 mV vs. SCE, reduces the corrosion current density (I_corr) from 1.09 µA/cm² to 0.035 µA/cm², and raises the impedance modulus at 0.01 Hz from 67 kΩ to 3794 kΩ. When structured with the hierarchical feather topography, the PMC coating (Bio-PA-MX-5) further advances the E_corr to +103.6 mV, lowers the I_corr to 7.22 × 10⁻⁴ µA/cm², and boosts the impedance to 96,875 kΩ. Compared to neat coatings without biomimetic structuring, those with engineered biomimetic surfaces showed significantly improved corrosion protection performance. These enhancements arise from three synergistic mechanisms: (i) polyaniline’s redox catalysis accelerates the formation of a dense passive oxide layer; (ii) MXene nanosheets create a tortuous gas barrier that cuts the oxygen permeability from 11.3 Barrer to 0.9 Barrer; and (iii) the biomimetic surface traps air pockets, raising the water contact angle from 87° to 135°. This integrated approach delivers one of the highest combined corrosion potentials and impedance values reported for thin-film coatings, pointing to a general strategy for durable steel protection. Full article

It is widely recognized that fine surface structures found in nature contribute to surface functionality, and studies on the design of functional materials based on biomimetics have been actively conducted. In this study, polymer thin films with hierarchically ordered surface structure were prepared by combining both nanoimprinting using anodically oxidized porous alumina (AAO) as a template and surface-initiated atom transfer radical polymerization (SI-ATRP). To prepare such polymer films, we designed a new copolymer (poly{[2-(4-methyl-2-oxo-2H-chromen-7-yloxy)ethyl methacrylate]-co-[2-(2-bromo-2-methylpropionyloxy)ethyl methacrylate]}; poly(MCMA-co-HEMABr)) with coumarin moieties and α-haloester moieties in the pendants. The MCMA repeating units function to fix the pillar structure by photodimerization, and the HEMABr ones act as the polymerization initiation sites for SI-ATRP on the pillar surfaces. Surface structures consisting of vertically oriented multiple pillars were fabricated on the spin-coated poly(MCMA-co-HEMABr) thin films by nanoimprinting using an AAO template. Then, the coumarin moieties inside each pillar were crosslinked by UV light irradiation to fix the pillar structure. SEM observation confirmed that the internally crosslinked pillar structures were maintained even when immersed in organic solvents such as 1,2-dichloroethane and anisole, which are employed as solvents under SI-ATRP conditions. Finally, poly(2,2,2-trifluoroethyl methacrylate) and poly(N-isopropylacrylamide) chains were grafted onto the thin film by SI-ATRP, respectively, to prepare the hierarchically ordered surface structure. Furthermore, in this study, the surface properties as well as the thermoresponsive hydrophilic/hydrophobic switching of the obtained polymer films were investigated. The surface morphology and chemistry of the films with and without pillar structures were compared, especially the interfacial properties expressed as wettability. Grafting poly(TFEMA) increased the static contact angle for both flat and pillar films, and the con-tact angle of the pillar film surface increased from 104° for the flat film sample to 112°, suggesting the contribution of the pillar structure. Meanwhile, the pillar film surface grafted with poly(NIPAM) brought about a significant change in wettability when changing the temperature between 22 °C and 38 °C. Full article

Xerostomia significantly compromises oral comfort, mucosal integrity, and denture retention. While topical therapies such as oral gels are commonly used to manage symptoms, their effectiveness remains limited due to an inability to replicate the complex biochemical and mechanical functions of natural saliva. This review explores the pathophysiology of salivary dysfunction, the structural and functional roles of mucins, and the tribological and rheological demands of the oral environment—particularly in denture wearers. Emphasis is placed on the interplay between mucosal surfaces, salivary films, and prosthetic biomaterials, as well as the importance of mucoadhesion and aqueous boundary lubrication. A rheological comparison of commercially available oral gels and whole human saliva (WHS) reveals that gels are significantly more viscous and elastic, yet fail to mimic the dynamic responsiveness of saliva. Current formulations lack functional standardization and labeling, limiting clinical guidance. The study proposes design principles for next-generation gels that incorporate amphiphilic, biomimetic components and measurable performance benchmarks. Full article

Both biochemical cues and the electrophysiological microenvironment play a pivotal role in influencing cell behaviors. In this study, collagen/polypyrrole biomimetic electroactive composite coatings with a fiber network structure were constructed on the surface of titanium substrates by hot alkali treatment and stepwise electrochemical deposition. Materialistic characterization and electrochemical performance tests demonstrated that the titanium electrodes modified with collagen/polypyrrole composite coatings exhibited the surface morphology of a collagen film layer, and their electroactivity was significantly enhanced. Cellular experiments demonstrated that the collagen in the composite coatings could provide good biomimetic biochemical cues as a main extracellular matrix component, which have a substantial effect in promoting cell adhesion, proliferation, and osteogenic differentiation. Furthermore, under exogenous electrical signals, the polypyrrole coating has the capacity to facilitate an appropriate electrophysiological microenvironment, thereby promoting osteogenic differentiation. The collagen/polypyrrole composite coating exhibited a better effect in promoting osteogenic differentiation among all samples by simultaneously providing the appropriate biochemical cues and electrophysiological microenvironments. This work demonstrates the feasibility of synergistic pro-osteogenesis by biochemical cues and an electrophysiological microenvironment, which is instructive for the field of bone tissue engineering. Full article

Advanced gas turbine cooling technologies are required to bridge the gap between turbine inlet temperatures and component thermal limits. Transpiration cooling has emerged as a promising method, leveraging porous structures to enhance cooling effectiveness. Recent advancements in additive manufacturing (AM) enable precise fabrication of complex transpiration cooling architectures, such as triply periodic minimal surface (TPMS) and biomimetic designs. This review analyzes AM-enabled transpiration cooling for gas turbines, elucidating key parameters, heat transfer mechanisms, and flow characteristics of AM-fabricated designs through experimental and numerical studies. Previous research has concluded that well-designed transpiration cooling achieves cooling effectiveness up to five times higher than the traditional film cooling methods, minimizes jet lift-off, improves temperature uniformity, and reduces coolant requirements. Optimized coolant controls, graded porosity designs, complex topologies, and hybrid cooling architectures further enhance the flow uniformity and cooling effectiveness in AM transpiration cooling. However, challenges remain, including 4–77% porosity shrinkage in perforated transpiration cooling for 0.5–0.06 mm holes, 15% permeability loss from defects, and 10% strength reduction in AM models. Emerging solutions include experimental validations using advanced diagnostics, high-fidelity multiphysics simulations, AI-driven and topology optimizations, and novel AM techniques, which aim at revolutionizing transpiration cooling for next-generation gas turbines operating under extreme conditions. Full article

In the process of heavy-duty cutting, the reciprocating motion of the sliding guide pair surface is prone to local wear, which seriously affects the overall machining accuracy and service life of the machine tool. This study proposes a biomimetic micro-texture design scheme combining elliptical grooves and shell-shaped grooves on the surface of carp as biomimetic prototypes to enhance the oil film bearing capacity, drag reduction, and wear resistance of guide rail pairs. Based on Fluent fluid simulation research, it has been shown that this texture has a better dynamic pressure lubrication effect. We used response surface methodology to optimize the texture design parameters and further verify the accuracy of the optimal parameters with the NSGA-II genetic algorithm. The results show that under lubricated conditions, the load-bearing pressure of the combined micro-textured guide rail pair increased by 53.79%, the friction coefficient decreased by 39.04%, and the temperature decreased by 15.83%. This texture can still significantly improve drag reduction and wear resistance in a low-oil state. Full article

In recent years, flexible piezoresistive sensors based on polydimethylsiloxane (PDMS) matrix materials have developed rapidly, showing broad application prospects in fields such as human motion monitoring, electronic skin, and intelligent robotics. However, achieving a balance between structural durability and fabrication simplicity remains challenging. Traditional methods for preparing PDMS flexible substrates with high porosity and high stability often require complex, costly processes. Breaking through the constraints of conventional material systems, this study innovatively combines the high elasticity of polydimethylsiloxane (PDMS) with the stochastically distributed porous topology of a sponge-derived biotemplate through biomimetic templating replication technology, fabricating a heterogeneous composite system with an architecturally asymmetric spatial network. After 5000 loading cycles, uncoated samples experienced a thickness reduction of 7.0 mm, while PDMS-coated samples showed minimal thickness changes (2.0–3.0 mm), positively correlated with curing agent content (5:1 to 20:1). The 5:1 ratio sample demonstrated exceptional mechanical stability. As evidenced, the PDMS film-encapsulated architecturally asymmetric spatial network demonstrates superior stress dissipation efficacy, effectively mitigating stress concentration phenomena inherent to symmetric configurations that induce matrix fracture, thereby achieving optimal mechanical stability. Compared to the pre-test resistance distribution of 10–248 Ω, after 5000 cyclic loading cycles, the uncoated samples exhibited a narrowed resistance range of 10–50 Ω, while PDMS-coated samples maintained a broader resistance range (10–240 Ω) as the curing agent ratio increased (from 20:1 to 5:1), demonstrating that increasing the curing agent ratio helps maintain conductive network stability. The 5:1 ratio sample displayed the lowest resistance variation rate attenuation—only 3% after 5000 cycles (vs. 80% for uncoated samples)—and consistently minimal attenuation at all stages, validating superior electrical stability. Under 0–6 kPa pressure, the 5:1 ratio device maintained a linear sensitivity of 0.157 kPa⁻¹, outperforming some existing works. Human motion monitoring experiments further confirmed its reliable signal output. Furthermore, the architecturally asymmetric spatial network of the device enables superior conformability to complex curvilinear geometries, leveraging its structural anisotropy to achieve seamless interfacial adaptation. By synergistically optimizing material composition and structural design, this study provides a novel technical method for developing highly durable flexible electronic devices. Full article

The study of natural materials inspires sustainable innovations, with biomimetics excelling in surface modification. Polydopamine (PDA) offers a promising approach for modifying cellulose nanocrystals (CNC), enhancing their compatibility with hydrophobic polymers by improving interfacial adhesion. In this work, the modification of CNC with PDA (CNC@PDA) significantly enhanced the compatibility between the nanocargoes and the cellulose acetate (CA) matrix. The CNC@PDA complex formation was suggested through a combination of FTIR analysis, particle size distribution measurements and ζ-potential analysis. However, the exact mechanism behind dopamine polymerization on the surface of CNC remains a subject of ongoing debate among researchers due to its complexity. This study hypothesized the formation of modified CNC through this process. Furthermore, this study provided a satisfactory investigation of the antimicrobial activity of CNC@PDA in response to bacterial strains (E. coli, P. aeruginosa, S. aureus and L. plantarum) in view of the hypothesis of the possible generation of reactive oxygen species (ROS). Additionally, the incorporation of CNC@PDA CA films was analyzed to assess its effect as a mechanical reinforcement agent. The results showed an improvement in mechanical properties, with the 1% CNC@PDA film exhibiting the best balance between tensile strength and flexibility. Full article

This paper investigates the integration of thermo-responsive materials into bio-inspired structures, combining biomimicry and adaptive technologies in architecture. A problem-based biomimetic approach and a morphological analogy with the plate-type snowflake—known for its lightness, transparency, and crystalline organisation—were adopted to develop the geometry of an architectural pavilion. This research highlights glass as a main constructive material, analysing the potential of thermochromic film and the hydrogel technique, both inserted in the context of thermo-responsiveness. In this regard, the focus is on adaptations to temperature changes, exploring how these materials can alter their properties in response to solar incidence, offering solutions for energy efficiency, thermal regulation, and environmental adaptation. The pavilion demonstrates that this integration is feasible, and this is supported by an interdisciplinary approach that combines materials science, bio-inspired design, and practical experimentation. It also highlights biomimicry’s fundamental role as a tool for guiding the development of innovative architectural geometries, while thermo-responsive materials expand the possibilities for creating structures that are adaptable to temperature variations and solar exposure. The conclusion points to the applicability and relevance of this combination, highlighting the transformative potential of thermo-responsive materials in architectural projects, especially in the development of lightweight, transparent, and environmentally responsive structures. Full article

Bone defects restoration has always been an arduous challenge in the orthopedic field due to the limitations of conventional grafts. Bone tissue engineering offers an alternative approach by using biomimetic materials, stem cells, and growth factors that are able to improve the regeneration of bone tissue. Different biomaterials have attracted great interest in BTE applications, including the poly(3-hexylthiofene) (P3HT) conductive polymer, whose primary advantage is its capability to provide a native extracellular matrix-like environment. Based on this evidence, in this study, we evaluated the biological response of human adipose-derived mesenchymal stem cells cultured on P3HT thin polymer film for 14 days. Our results suggest that P3HT represents a good substrate to induce osteogenic differentiation of osteoprogenitor cells, even in the absence of specific inductive growth factors, thus representing a promising strategy for bone regenerative medicine. Therefore, the system provided may offer an innovative platform for next-generation biocompatible materials for regenerative medicine. Full article

Despite the promising potential of cell-based therapies developed using tissue engineering techniques to treat a wide range of diseases, including limbal stem cell deficiency (LSCD), which leads to corneal blindness, their commercialization remains constrained. This is primarily attributable to the limited cell sources, the use of non-standardizable, unscalable, and unsustainable techniques, and the extended manufacturing processes required to produce transplantable tissue-like surrogates. Herein, we present the first demonstration of the potential of a novel approach combining collagen films (CF), hyaluronic acid (HA), human telomerase-immortalized limbal epithelial stem cells (T-LESCs), and macromolecular crowding (MMC) to develop innovative biomimetic substrates for limbal epithelial stem cells (LESCs). The initial step involved the fabrication and characterization of CF and CF enriched with HA (CF-HA). Subsequently, T-LESCs were seeded on CF, CF-HA, and tissue culture plastic (TCP). Thereafter, the effect of these matrices on basic cellular function and tissue-specific extracellular matrix (ECM) deposition with or without MMC was evaluated. The viability and metabolic activity of cells cultured on CF, CF-HA, and TCP were found to be similar, while CF-HA induced the highest (p < 0.05) cell proliferation. It is notable that CF and HA induced cell growth, whereas MMC increased (p < 0.05) the deposition of collagen IV, fibronectin, and laminin in the T-LESC culture. The data highlight the potential of, in particular, immortalized cells and MMC for the development of biomimetic cell culture substrates, which could be utilized in ocular surface reconstruction following further in vitro, in vivo, and clinical validation of the approach. Full article

The increasing occurrence of hot summer days causes stress to both humans and animals, particularly in urban areas where temperatures can remain high, even at night. Living nature offers potential solutions that require minimal energy and material costs. For instance, the Saharan silver ant (Cataglyphis bombycina) can endure the desert heat by means of passive radiative cooling induced by its triangular hairs. The objective of this study is to transfer the passive radiative cooling properties of the micro- and nanostructured chitin hairs of the silver ant body to technically usable, biodegradable and bio-based materials. The potential large-scale transfer of radiative cooling properties, for example, onto building exteriors such as house facades, could decrease the need for conventional cooling and, therefore, lower the energy demand. Chitosan, a chemically altered form of chitin, has a range of medical uses but can also be processed into a paper-like film. The procedure consists of dissolving chitosan in diluted acetic acid and uniformly distributing it on a flat surface. A functional structure can then be imprinted onto this film while it is drying. This study reports the successful transfer of the microstructure-based structural colors of a compact disc (CD) onto the film. Similarly, a polyvinyl siloxane imprint of the silver ant body shall make it possible to transfer cooling functionality to technically relevant surfaces. FTIR spectroscopy measurements of the reflectance of flat and structured chitosan films allow for a qualitative assessment of the infrared emissivity. A minor decrease in reflectance in a relevant wavelength range gives an indication that it is feasible to increase the emissivity and, therefore, decrease the surface temperature purely through surface-induced functionalities. Full article

Given the friction and drag reduction effects observed in various biological hexagonal structures in nature, a new design was implemented on the rubber surface of the stator of a submersible screw pump. This design featured a multilayer concentric hexagonal groove structure. Furthermore, a composite multilayer hexagonal structure integrating grooves and pits was also developed and applied. This study investigated the influence of groove layer number, groove depth, pit depth, and multilayer hexagonal groove texture arrangement on the rubber surface flow characteristics. Additionally, the pressure field state, the degree of influence on the oil film-bearing capacity, and the biomimetic and hydrodynamic lubrication theories were tested using the finite element analysis method. Tribological experiments were conducted on nanosecond laser-processed rubber textures under simulated liquid lubrication conditions, reflecting actual shale oil well experiments. These experiments aimed to investigate the influence of multilayer hexagonal shape parameters on the tribological characteristics of the stator-rotor friction pair of a submersible screw pump. The results indicated that with a constant overall size, a multilayer hexagonal structure with ~0.1 mm groove depth enhanced the oil film-bearing capacity, providing significant friction and drag reduction. For composite textures, a deeper pit depth within the study area enhanced the oil film-bearing capacity. Furthermore, a gradient arrangement of groove textures featuring wider outer grooves and shallower depth exhibited superior performance in terms of bearing capacity. Full article

To determine the formula for biomimetic warm-mix regeneration and fulfill the requirements of a “high waste asphalt mixture content, high quality, and high level” for its usage in reclaimed asphalt pavement (RAP), this paper first determined the suitable preparation process and formula for biomimetic warm-mix regeneration based on orthogonal experiments and a gray correlation analysis. Then, the optimum dosage of the warm-mix regenerant was determined by a uniaxial penetration test, low-temperature splitting test, and freeze–thaw penetration test. The rutting test was conducted to characterize the high-temperature performance of the asphalt mixture. The Immersion Marshall Test and the freeze–thaw splitting test were used to characterize the water stability of the recycled asphalt mixture. The low-temperature small beam test was employed to study the low-temperature performance of the recycled asphalt mixture. The asphalt’s short-term and long-term aging processes were simulated using the rotary thin-film oven test (RTFOT) and the pressure aging test (PAV). The action mechanism of biomimetic warm-mix regeneration was revealed by Fourier-transform infrared spectroscopy (FTIR). Finally, a comprehensive thermal performance test was conducted on the aged asphalt after biomimetic warm-mix regeneration. The results showed that the self-made biomimetic warm-mix regeneration agent exhibited an excellent regenerative effect on RAP and significantly reduced the mixing temperature of the styrene–butadiene–styrene (SBS)-modified asphalt mixture. In addition, the self-made biomimetic warm-mix regeneration agent effectively improved the high- and low-temperature performance of the recycled asphalt mixture, but had no noticeable effect on the water stability. The suggested dosage of the biomimetic warm-mix regeneration agent was 6%, and the mixing temperature was 130 °C. The microscopic chemical analysis revealed that biomimetic warm-mix regeneration restored the performance of aged asphalt by supplementing the light component. The change rules of the chemical functional groups and the comprehensive thermal properties of the recycled mixture showed a good correlation with the change rules of its high- and low-temperature performance. Full article