Search Results (796)

Using waste biomass as a raw material for the combined production of electricity and heat offers corresponding energy, economic, environmental and resource efficiency benefits. The study examines both the performance of a system for combined energy production based on the Organic Rankine Cycle (ORC) utilizing wood biomass and the market interest in its deployment within Bulgaria. Its objective is to propose a technically and economically viable solution for the recovery of waste biomass through the combined production of electricity and heat while simultaneously assessing the readiness of industrial and municipal sectors to adopt such systems. The cogeneration plant incorporates an ORC module enhanced with three additional economizers that capture residual heat from flue gases. Operating on 2 t/h of biomass, the system delivers 1156 kW of electric power and 3660 kW of thermal energy, recovering an additional 2664 kW of heat. The overall energy efficiency reaches 85%, with projected annual revenues exceeding EUR 600,000 and a reduction in carbon dioxide emissions of over 5800 t/yr. These indicators can be achieved through optimal installation and operation. When operating at a reduced load, however, the specific fuel consumption increases and the overall efficiency of the installation decreases. The marketing survey results indicate that 75% of respondents express interest in adopting such technologies, contingent upon the availability of financial incentives. The strongest demand is observed for systems with capacities up to 1000 kW. However, significant barriers remain, including high initial investment costs and uneven access to raw materials. The findings confirm that the developed system offers a technologically robust, environmentally efficient and market-relevant solution, aligned with the goals of energy independence, sustainability and the transition to a low-carbon economy. Full article

This paper presents an annual, real-world evaluation of the performance and economics of a residential photovoltaic (PV) system coupled with a battery energy storage system (BESS) in southern Poland. The system, monitored with 5 min resolution, operated under time-of-use (TOU) electricity tariffs. Seasonal variation was significant; self-sufficiency exceeded 90% in summer, while winter conditions increased grid dependency. The hybrid system reduced electricity costs by over EUR 1400 annually, with battery operation optimized for high-tariff periods. Comparative analysis of three configurations—grid-only, PV-only, and PV + BESS—demonstrated the economic advantage of the integrated solution, with the shortest payback period (9.0 years) achieved with financial support. However, grid voltage instability during high PV production led to inverter shutdowns, highlighting limitations in the infrastructure. This study emphasizes the importance of tariff strategies, environmental conditions, and voltage control when designing residential PV-BESS systems. Full article

Currently, Poland is witnessing a dynamic development of the offshore wind energy sector, which will be a key component of the national energy mix. While many international studies have addressed wind energy deployment, there is a lack of research that compares the energy and economic performance of both onshore and offshore wind farms under Polish climatic and spatial conditions, especially in relation to turbine spacing optimization. This study addresses that gap by performing a computer-based simulation analysis of three onshore spacing variants (3D, 4D, 5D) and four offshore variants (5D, 6D, 7D, 9D), located in central Poland (Stęszew, Okonek, Gostyń) and the Baltic Sea, respectively. The efficiency of wind farms was assessed in both energy and economic terms, using WAsP Bundle software and standard profitability evaluation metrics (NPV, MNPV, IRR). The results show that the highest NPV and MNPV values among onshore configurations were obtained for the 3D spacing variant, where the energy yield leads to nearly double the annual revenue compared to the 5D variant. IRR values indicate project profitability, averaging 14.5% for onshore and 11.9% for offshore wind farms. Offshore turbines demonstrated higher capacity factors (36–53%) compared to onshore (28–39%), with 4–7 times higher annual energy output. The study provides new insight into wind farm layout optimization under Polish conditions and supports spatial planning and investment decision making in line with national energy policy goals. Full article

This paper presents a critical and comprehensive review of the application of mining waste, specifically waste rock and tailings, in asphalt pavements, with the aim of synthesizing performance outcomes and identifying key research gaps. A systematic literature search yielded a final dataset of 41 peer-reviewed articles for detailed analysis. Bibliometric analysis indicates a notable upward trend in annual publications, reflecting growing academic and practical interest in this field. Performance-based evaluations demonstrate that mining wastes, particularly iron and copper tailings, have the potential to enhance the high-temperature performance (i.e., rutting resistance) of asphalt binders and mixtures when utilized as fillers or aggregates. However, their effects on fatigue life, low-temperature cracking, and moisture susceptibility are inconsistent, largely influenced by the physicochemical properties and dosage of the specific waste material. Despite promising results, critical knowledge gaps remain, particularly in relation to long-term durability, comprehensive environmental and economic Life-Cycle Assessments (LCA), and the inherent variability of waste materials. This review underscores the substantial potential of mining wastes as sustainable alternatives to conventional pavement materials, while emphasizing the need for further multidisciplinary research to support their broader implementation. Full article

In the context of urban decarbonization, multi-energy microgrids (MEMGs) are gaining increasing relevance due to their ability to enhance synergies across multiple energy vectors. This study presents a block-based MILP framework developed to optimize the operations of a real MEMG, with a particular focus on accurately modeling the structure of electricity and natural gas bills. The objective is to assess the added economic value of integrating a battery energy storage system (BESS) under the assumption it is employed to provide implicit flexibility—namely, bill management, energy arbitrage, and peak shaving. Results show that under assumed market conditions, tariff schemes, and BESS costs, none of the analyzed BESS configurations achieve a positive net present value. However, a 2 MW/4 MWh BESS yields a 3.8% reduction in annual operating costs compared to the base case without storage, driven by increased self-consumption (+2.8%), reduced thermal energy waste (–6.4%), and a substantial decrease in power-based electricity charges (–77.9%). The performed sensitivity analyses indicate that even with a significantly higher day-ahead market price spread, the BESS is not sufficiently incentivized to perform pure energy arbitrage and that the effectiveness of a time-of-use power-based tariff depends not only on the level of price differentiation but also on the BESS size. Overall, this study provides insights into the role of BESS in MEMGs and highlights the need for electricity bill designs that better reward the provision of implicit flexibility by storage systems. Full article

Accurate forecasting of household waste generation is essential for sustainable urban planning and the development of data-driven environmental policies. Conventional statistical models, while simple and interpretable, often fail to capture the nonlinear and multidimensional relationships inherent in waste production patterns. This study proposes a machine learning-based regression framework utilizing Random Forest and XGBoost algorithms to predict annual household waste generation across four metropolitan regions in South Korea Seoul, Gyeonggi, Incheon, and Jeju over the period from 2000 to 2023. Independent variables include demographic indicators (total population, working-age population, elderly population), economic indicators (Gross Regional Domestic Product), and regional identifiers encoded using One-Hot Encoding. A derived feature, elderly ratio, was introduced to reflect population aging. Model performance was evaluated using R², RMSE, and MAE, with artificial noise added to simulate uncertainty. Random Forest demonstrated superior generalization and robustness to data irregularities, especially in data-scarce regions like Jeju. SHAP-based interpretability analysis revealed total population and GRDP as the most influential features. The findings underscore the importance of incorporating economic indicators in waste forecasting models, as demographic variables alone were insufficient for explaining waste dynamics. This approach provides valuable insights for policymakers and supports the development of adaptive, region-specific strategies for waste reduction and infrastructure investment. Full article

The maritime sector is undergoing rapid transformation, driven by increasingly stringent international regulations targeting air pollution. While newly built vessels integrate advanced technologies for compliance, the global fleet averages 21.8 years of age and must meet emission requirements through retrofitting or operational changes. This study evaluates, at environmental and economic levels, two key sulphur abatement strategies for a 1998-built cruise vessel nearing the end of its service life: (i) the installation of open-loop scrubbers with fuel enhancement devices, and (ii) a switch to marine diesel oil as main fuel. The analysis was based on real operational data from a cruise vessel. For the environmental assessment, a Tier III hybrid emissions model was used. The results show that scrubbers reduce SO_x emissions by approximately 97% but increase fuel consumption by 3.6%, raising both CO₂ and NO_x emissions, while particulate matter decreases by only 6.7%. In contrast, switching to MDO achieves over 99% SO_x reduction, an 89% drop in particulate matter, and a nearly 5% reduction in CO₂ emissions. At an economic level, it was found that, despite a CAPEX of nearly USD 1.9 million, scrubber installation provides an average annual net saving exceeding USD 8.2 million. From the deterministic and probabilistic analyses performed, including Monte Carlo simulations under various fuel price correlation scenarios, scrubber installation consistently shows high profitability, with NPVs surpassing USD 70 million and payback periods under four months. Full article

Accurate estimation of available rooftop areas for PV power generation at the city scale is critical for sustainable energy planning and policy development. In this study, using publicly available high-resolution satellite imagery, rooftop solar energy potential in urban, rural, and industrial areas is estimated using deep learning models. In order to identify roof areas, high-resolution open-source images were manually labeled, and the training dataset was trained with DeepLabv3+ architecture. The developed model performed roof area detection with high accuracy. Model outputs are integrated with a user-friendly interface for economic analysis such as cost, profitability, and amortization period. This interface automatically detects roof regions in the bird’s-eye -view images uploaded by users, calculates the total roof area, and classifies according to the potential of the area. The system, which is applied in 81 provinces of Turkey, provides sustainable energy projections such as PV installed capacity, installation cost, annual energy production, energy sales revenue, and amortization period depending on the panel type and region selection. This integrated system consists of a deep learning model that can extract the rooftop area with high accuracy and a user interface that automatically calculates all parameters related to PV installation for energy users. The results show that the DeepLabv3+ architecture and the Adam optimization algorithm provide superior performance in roof area estimation with accuracy between 67.21% and 99.27% and loss rates between 0.6% and 0.025%. Tests on 100 different regions yielded a maximum roof estimation accuracy IoU of 84.84% and an average of 77.11%. In the economic analysis, the amortization period reaches the lowest value of 4.5 years in high-density roof regions where polycrystalline panels are used, while this period increases up to 7.8 years for thin-film panels. In conclusion, this study presents an interactive user interface integrated with a deep learning model capable of high-accuracy rooftop area detection, enabling the assessment of sustainable PV energy potential at the city scale and easy economic analysis. This approach is a valuable tool for planning and decision support systems in the integration of renewable energy sources. Full article

Low-concentration N₂O (≤5%) emissions from agricultural fields and waste treatment facilities in China reach 7.333 × 10⁵ t annually, making them a significant but inadequately controlled contributor to global warming. Agricultural wastes were selected as precursors to prepare biochar, including pecan shell (SH), poplar sawdust (JM), wheat straw (XM), and corn straw (YM), which were subsequently acid-modified with 0.1 mol L⁻¹ HCl. The objectives were (i) to quantify the enhancement in N₂O capture achievable by acid treatment, (ii) to elucidate the underlying chemisorption mechanism, and (iii) to identify the most efficient feedstock for practical deployment. Acid modification increased the oxygen content, specific surface area, and the number of hydroxyl and carboxyl groups on the biochar surface. Both modified and unmodified biochar followed the pseudo-second-order kinetic model (R² ≥ 0.960), indicating chemisorption-dominated processes. The adsorption performance ranked as XM > JM > SH > YM, with XM exhibiting the highest adsorption capacity (26.000 mol/kg unmodified, 43.088 mol/kg modified, 65.72% increase). The Langmuir model provided a better fit for N₂O adsorption, suggesting dynamic multilayer heterogeneous adsorption. The findings demonstrate that acid-modified biochar derived from agricultural waste is a scalable, economical, and environmentally friendly adsorbent for mitigating low-concentration N₂O emissions. Full article

Gobi solar greenhouses (GSGs) enhance energy, food, and financial security in Gobi Desert regions through passive solar utilization. Thermal mass walls are critical for plant thermal comfort in GSGs but can lead to resource waste if poorly designed. This study pioneers the integration of payback period constrains into thermal mass wall optimization, establishing a new performance–cost trade-off approach for GSG wall design, balancing thermal performance and economic feasibility. We quantified energy-conserving benefits against wall-construction costs to derive the optimal inner-layer thicknesses under <25% GSG lifespan payback criteria. Three GSG thermal mass walls in China’s Hexi Corridor were optimized. For the concrete-layered, stone-layered, and pebble-soil walls, the optimum inner-layer thicknesses were 0.47, 0.65, and 1.24 m, respectively, with extra costs of 620.75, 767.60, and 194.56 RMB yuan; annual energy-conserving benefits of 82.77, 102.35, and 51.88 RMB yuan·yr⁻¹; and payback periods of 7.5, 7.5, and 3.75 years. A dynamic thermal load analysis confirmed that GSGs with optimized walls required no heating during a sunny winter solstice night. Cooling loads of 33.15–35.27 kW further indicated the potential to maintain thermal comfort under colder weather conditions. This approach improves plant thermal comfort cost-effectively, advancing sustainable Gobi agriculture. Full article

Background/Objectives: Traumatic brain injury (TBI) is a global public health concern, affecting over 60 million people annually. It is associated with high rates of mortality and disability, particularly among young and economically active individuals, and remains the leading cause of death in people under 40 years of age. Although computed tomography (CT) is the standard method for excluding intracranial bleeding (ICB), it is frequently unavailable in resource-limited settings where the burden of TBI is greatest. The InfraScanner 2000 is a near-infrared spectroscopy (NIRS) device designed to detect ICB and may serve as a triage tool in environments without access to CT imaging. This study aimed to evaluate the diagnostic performance of the InfraScanner 2000 for detecting ICB in the emergency department (ED) of a trauma center in a cohort of Colombian patients with TBI. Methods: This prospective study was conducted in Cali, Colombia, between December 2019 and February 2021. Adult patients presenting to the ED with blunt TBI were enrolled. InfraScanner assessments were performed according to a standardized protocol, and all participants underwent head CT within 6 h of injury. Results: A total of 140 patients were included. Of these, 66% were male and 34% were female. Most patients (63.57%) were between 18 and 39 years old, with a median age of 39 years (IQR: 18–86). The InfraScanner demonstrated a sensitivity of 60.0% (95% CI: 32.5–84.8), specificity of 78.4% (95% CI: 71.2–85.6), positive predictive value (PPV) of 25.0%, and negative predictive value (NPV) of 94.2% for detecting ICB. Conclusions: The InfraScanner 2000 showed good specificity and high NPV in identifying ICB among Colombian patients with TBI. These findings suggest it could serve as a useful triage tool to support decision-making in emergency settings with limited access to CT imaging. Full article

This study aims to evaluate the sustainability performance of EU regions through a comprehensive and data-driven Environmental, Social, Governance (ESG) framework, addressing the increasing demand for regional-level analysis in sustainable finance and policy design. Leveraging Partial Least Squares (PLS) regression and cluster analysis, we construct composite ESG indicators that adjust for economic size using GDP normalization and LOESS smoothing. Drawing on panel data from 2010 to 2023 and over 170 indicators, we model the determinants of ESG performance at both the national and regional levels across the EU-27. Time-based ESG trajectories are assessed using Compound Annual Growth Rates (CAGR), capturing resilience to shocks such as the COVID-19 pandemic and geopolitical instability. Our findings reveal clear spatial disparities in ESG performance, highlighting the structural gaps in governance, environmental quality, and social cohesion. The model captures patterns of convergence and divergence across EU regions and identifies common drivers influencing sustainability outcomes. This paper introduces an integrated framework that combines PLS regression, clustering, and time-based trend analysis to assess ESG performance at the subnational level. The originality of this study lies in its multi-layered approach, offering a replicable and scalable model for evaluating sustainability with direct implications for green finance, policy prioritization, and regional development. This study contributes to the literature by applying advanced data-driven techniques to assess ESG dynamics in complex economic systems. Full article

The dynamic development of distributed sources (mainly RES) contributes to the emergence of, among others, balance and overload problems. For this reason, many RES do not receive conditions for connection to the power grid in Poland. Operators sometimes extend permits based on the possibility of periodic power reduction in RES in the event of the problems mentioned above. Before making a decision, investors, for economic reasons, need information on the probability of annual power reduction in their potential installation. Analyses that allow one to determine such a probability require knowledge of the reliability indicators of transmission lines and transformers, as well as failure removal times. The article analyses the available literature on the annual risk of outages of these elements and methods to determine the appropriate reliability indicators. Example calculations were performed for two networks (test and real). The values of indicators and times that can be used in practice were indicated. The unique contribution of this article lies not only in the comprehensive comparison of current, relevant transmission line and transformer reliability analysis methods but also in developing the first reliability indices for the Polish power system in more than 30 years. It is based on the relationships presented in the article and their comparison with results reported in the international literature. Full article

In Brazil, approximately 93 trillion litres of water are withdrawn annually from surface and groundwater sources, with urban human use being the second-largest water consumer. Therefore, reducing water consumption in buildings is crucial. This study performed a technical and economic analysis of isolated and combined water-saving strategies at the Central Library of the Federal University of Santa Catarina (UFSC). The strategies assessed included water-saving appliances, rainwater harvesting, and greywater and blackwater reuse, individually and in four combined scenarios. User surveys provided data on the frequency and duration of water appliance use and cleaning activities, while on-site water flow measurements enabled the estimation of water end uses. The potential for potable water savings was then determined for each strategy and scenario. The highest savings (77.96%) were achieved by combining water-saving appliances with blackwater reuse, followed by a combination of water-saving appliances, greywater reuse, and rainwater harvesting (65.73%). All strategies were economically viable, except the combination of water-saving appliances with greywater reuse, which showed a negative net present value. The scenario combining water-saving appliances and blackwater reuse generated the most significant financial savings (R$7782.48 per month), with a payback period of 50 months. Given its environmental and economic benefits, these scenarios were recommended for implementation. The study may be replicated worldwide, and one key conclusion is that libraries consume a significant amount of potable water for non-potable purposes, which should be supplemented with alternative sources. It is essential to consider whether the building is already built or under design, as some implementation processes require design modifications. Full article

Soybean production in Thailand faces significant challenges from malignant weed competition, potentially reducing yields by up to 37% and incurring annual economic losses of approximately USD 3.8 billion. Pre-emergence herbicides are critical for integrated weed management, but their efficacy varies depending on local conditions and soybean varieties. This study evaluates the performance of three pre-emergence herbicides, pendimethalin (1875 g a.i. ha⁻¹), s-metolachlor (900 g a.i. ha⁻¹), and flumioxazin (125 g a.i. ha⁻¹), on weed control efficiency (WCE), soybean growth, phytotoxicity, and yield in Northeast Thailand using a randomised complete block design with two varieties (CM60 and Morkhor60) across rainy (2023) and dry (2024/2025) seasons. Herbicide performance varied seasonally: s-metolachlor showed optimal rainy season results (61.54% weed control efficiency at 63 days after herbicide application (DAA), with a yield of 1036 kg ha⁻¹), while flumioxazin excelled in dry conditions (64.32% WCE, <4% phytotoxicity, and 1243 kg ha⁻¹ yield). Pendimethalin performed poorly under wet conditions but improved in drier weather. Among five dominant weed species, Cyperus rotundus proved the most resilient. CM60 demonstrated superior herbicide tolerance and yield stability, particularly under rainy conditions. These results emphasise that season-specific herbicide selection and variety matching are crucial for herbicide resistance management and effective weed control in Thailand’s rainfed soybean systems. Full article