Search Results (562)

Cassava is the sixth most important food crop and is cultivated in more than 100 countries. The crop tolerates low soil fertility and drought, enabling it to play a role in climate adaptation strategies. Cassava generally requires careful preparation to remove toxic hydrogen cyanide (HCN) before its consumption, but HCN concentrations can vary considerably between varieties. Climate change and low inputs, particularly carbon and nutrients, affect agriculture in Pacific Island countries where cassava is commonly grown alongside traditional crops (e.g., taro). Despite increasing popularity in this region, there is limited experimental data about cassava crop management for different local varieties, their relative toxicity and nutritional value for human consumption, and their interaction with changing climate conditions. To help address this knowledge gap, three field experiments were conducted at the Koronivia Research Station of the Fiji Ministry of Agriculture. Two varieties of cassava with contrasting HCN content were planted at three different times coinciding with the start of the wet (September-October) or dry (April) seasons. A time series of measurements was conducted during the full 18-month or differing 6-month durations of each crop, based on destructive harvests and phenological observations. The former included determination of total biomass, HCN potential, carbon isotopes (δ¹³C), and elemental composition. Yield and nutritional value were significantly affected by variety and time of planting, and there were interactions between the two factors. Findings from this work will improve cassava management locally and will provide a valuable dataset for agronomic and biophysical model testing. Full article

The agronomic effectiveness of biofertilizers is influenced by strain origin, genetic identity, crop genotype, soil type, and environmental conditions. For best results, both the plant and rhizobia strain must be adapted to the common harsh soil conditions in the tropics. While plant varieties have changed over the years, complementary research on new strains effectiveness under varying soil fertility conditions has lagged in southern Africa. Seven field experiments were established in the main soybean-producing areas of Zimbabwe in the north, central, and north–east regions to evaluate agronomic benefits of new rhizobia strains against the current exotic commercial strain (MAR1491). One site was irrigated (site 3), and the other six sites were rainfed (sites 1, 2, 4, 5, 6, and 7). While trends in inoculation response varied from site to site due to site conditions, inoculation with the strains NAZ15, NAZ25, and NAK128 consistently yielded high grain yields, which were similar to the current commercial strain MAR1491 and to application of mineral fertilizer (51.75 and 100 kg N ha⁻¹). Grain yield levels were generally below 2 t ha⁻¹ for sites 2, 3, and 5 and above 2 t ha⁻¹ for sites 1, 4, and 6, while for the irrigated site 3, they ranged upwards of 3 t ha⁻¹. When irrigated, all strains except NAK9 performed similarly in terms of grain yields and aboveground N uptake. Further testing on the inclusion of the indigenous strains NAZ15, NAZ25, and NAK128 in multi-strain commercial inoculant production targeting application in regions and soils where they excel beyond the current exotic strain MAR1491 is recommended. Full article

This study presented an autonomous shield-cutting end-effector for maize surrounding weeding (SEMSW), addressing the challenges of the low weed removal rate (WRR) and high seedling damage rate (SDR) in northern China’s 3–5 leaf stage maize. The SEMSW integrated seedling positioning, robotic arm control, and precision weeding functionalities: a seedling positioning sensor identified maize seedlings and weeds, guiding XYZ translational motions to align the robotic arm. The seedling-shielding anti-cutting mechanism (SAM) enclosed crop stems, while the contour-adaptive weeding mechanism (CWM) activated two-stage retractable blades (TRWBs) for inter/intra-row weeding operations. The following key design parameters were determined: 150 mm inner diameter for the seedling-shielding disc; 30 mm minimum inscribed-circle for retractable clamping units (RCUs); 40 mm ground clearance for SAM; 170 mm shielding height; and 100 mm minimum inscribed-circle diameter for the TRWB. Mathematical optimization defined the shape-following weeding cam (SWC) contour and TRWB dimensional chain. Kinematic/dynamic models were introduced alongside an adaptive sliding mode controller, ensuring lateral translation error convergence. A YOLOv8 model achieved 0.951 precision, 0.95 mAP50, and 0.819 mAP50-95, striking a balance between detection accuracy and localization precision. Field trials of the prototype showed 88.3% WRR and 2.2% SDR, meeting northern China’s agronomic standards. Full article

This study aimed to evaluate the impact of intercropping Brassica oleracea. with three perennial grasses (Poa pratensis L., Lolium perenne L., and Festuca rubra L.) under varying levels of iron (Fe) availability (Fe0, Fe1 and Fe5) in nutrient solutions. The research focused on biomass accumulation, photosynthetic efficiency, root development, nutrient uptake, and oxidative stress response. In the absence of Fe, Brassica sp. exhibited chlorosis, reduced biomass, and increased ferric chelate reductase (FCR) enzyme activity as an adaptive response. Brassica plants intercropped with Poa sp. maintained higher chlorophyll (Chl) levels and photosystem II efficiency (F_v/F_m values), mitigating Fe deficiency effects. Catalase activity and polyphenol production varied with intercropping species, indicating differential stress response mechanisms. Intercropping improved Zn, Mn, and P accumulation, with Poa sp. facilitating greater Zn and Mn uptake. Intercropping Brassica sp. with specific grass species offers potential agronomic benefits by improving Fe use efficiency, mitigating stress, and enhancing nutrient uptake. Future research should focus on optimizing intercropping combinations for sustainable agricultural practices. Full article

Buckwheat, a dicotyledonous pseudocereal from the Polygonaceae family, has emerged as a crop of scientific and industrial interest due to its exceptional phytochemical profile, adaptability to different environments, and minimal agronomic input requirements. This paper aims to highlight the proximate composition (carbohydrates, protein, dietary fiber, lipids, starch, vitamins, and minerals) of the buckwheat principal species, Fagopyrum esculentum Moench (common buckwheat) and Fagopyrum tataricum (L.) Gaertn (Tartary buckwheat). Other bioactive compounds, including flavonoids (e.g., rutin, quercetin), phenolic acids, and anthocyanins, were emphasized, together with their influence on human health. These constituents confer a broad range of biological activities such as anti-inflammatory, antimicrobial, antidiabetic, antihypertensive, and hypoglycemic effects. Moreover, buckwheat is inherently gluten-free, making it a valuable alternative in formulations targeting gluten-sensitive populations. Finally, the review addresses the possibility of using starch buckwheat as a raw material in starch-based films. Further research is needed to elucidate the potential of buckwheat starch as a viable material for the development of biodegradable food packaging films. Full article

Maize is an essential staple food, and its genetic diversity plays a central role in breeding programs aimed at developing climate-adapted cultivars. Constructing a representative core germplasm set is necessary for the efficient conservation and utilization of maize genetic resources. In this study, we analyzed 588 cultivated maize accessions using agronomic traits such as plant morphology and yield traits such as ear characteristics and single-nucleotide polymorphisms (SNPs) to assess molecular diversity and population structure and to construct a core collection. Nineteen phenotypic traits were evaluated, revealing high genetic diversity and significant correlations among most quantitative traits. The optimal sampling strategy was identified as “Mahalanobis distance + 20% + deviation sampling + flexible method.” Whole-genome genotyping was conducted using the Maize6H-60K liquid phase chip. Population structure analysis, principal component analysis, and cluster analysis divided the 588 accessions into six subgroups. A core collection of 172 accessions was selected based on both phenotypic and genotypic data. These were further evaluated for salt–alkali tolerance during germination, and cluster analysis classified them into five groups. Sixty-five accessions demonstrated salt–alkali tolerance, including 18 with high resistance. This core collection serves as a valuable foundation for germplasm conservation and utilization strategies. Full article

Seasonal climate variability and agronomic management profoundly influence both the productivity and nutritive value of temperate hay meadows. We analyzed five years of data (2019, 2020, 2022–2024) from 15 meadows in the central Spanish Pyrenees to quantify how environmental variables (January–June minimum temperatures, rainfall), management variables (fertilization rates (N, P, K), livestock load, cutting date), and vegetation (plant biodiversity (Shannon index)) drive total biomass yield (kg ha⁻¹), protein content (%), and Relative Feed Value (RFV). Using Random Forest regression with rigorous cross-validation, our yield model achieved an R² of 0.802 (RMSE = 983.8 kg ha⁻¹), the protein model an R² of 0.786 (RMSE = 1.71%), and the RFV model an R² of 0.718 (RMSE = 13.86). Variable importance analyses revealed that March rainfall was the dominant predictor of yield (importance = 0.430), reflecting the critical role of early-spring moisture in tiller establishment and canopy development. In contrast, cutting date exerted the greatest influence on protein (importance = 0.366) and RFV (importance = 0.344), underscoring the sensitivity of forage quality to harvest timing. Lower minimum temperatures—particularly in March and May—and moderate livestock densities (up to 1 LU) were also positively associated with enhanced protein and RFV, whereas higher biodiversity (Shannon ≥ 3) produced modest gains in feed quality without substantial yield penalties. These findings suggest that adaptive management—prioritizing soil moisture conservation in early spring, timely harvesting, balanced grazing intensity, and maintenance of plant diversity—can optimize both the quantity and quality of hay meadow biomass under variable climatic conditions. Full article

Permanent grasslands play a crucial role in ruminant nutrition, providing cost-effective and nutritionally rich forage. Their effective management is essential for improving agricultural productivity and sustainability. This review examines factors affecting forage quality, including environmental conditions, botanical composition, conservation methods, and fertilization strategies. The impact of grassland management practices, such as cutting frequency, grazing systems, and soil fertility enhancement, on forage nutritional value is discussed. Advances in breeding, including genomic selection and molecular techniques, offer opportunities to improve digestibility and resistance to environmental stress. Furthermore, conservation methods, including haymaking and silage production, significantly influence forage quality. Special attention is given to the role of legumes and multi-species swards in enhancing protein content and mineral composition. The review highlights that optimizing forage quality requires an integrated approach, combining agronomic practices, genetic improvements, and sustainable management strategies. Future research should focus on developing resilient forage systems that maintain high nutritional value while adapting to changing climatic conditions. Full article

The yield of common bean (Phaseolus vulgaris L.) is limited by abiotic stresses such as drought and high temperatures, which frequently occur simultaneously under field conditions. This study examined 100 bean genotypes under three environmental conditions, namely, the rainy season (optimal conditions), full irrigation in the dry season (high-temperature stress), and terminal drought in the dry season (combined stress), via a 10 × 10 triple-lattice design. Agronomic parameters evaluated included days to flowering (DF), days to physiological maturity (DM), plant height (PH), aerial biomass (BIO), grain yield (YLD), and 100-seed weight (100SW). The natural temperature exceeded 35 °C during the reproductive stage of the dry season. Combined stress revealed differential adaptive mechanisms in the tested germplasms, indicating that the response to multiple stresses is more complex than the sum of individual stress responses. The average yield under optimal conditions was 1344 kg/ha, decreasing to 889 kg/ha (66.1%) under irrigation with high temperatures and to 317 kg/ha (23.6%) under terminal drought with high temperatures. Under terminal drought with high temperatures, the number of days to maturity decreased by 5%, and the seed weight decreased by 20%. The G69-33-PT and G-19158 genotypes presented high yields under high-temperature stress, with yields above 1800 kg/ha, suggesting specific physiological mechanisms for tolerance to elevated temperatures. Under combined stress, genotypes G69-Sel25, Pinto Mestizo, and Dalia presented yields above 680 kg/ha, indicating adaptations in terms of water use efficiency and tolerance to high temperature. The identification of genotypes with differential stress tolerance provides valuable genetic resources for breeding programs. The diverse origins of superior germplasms (bred lines, landraces, and commercial cultivars) highlight the importance of exploring various germplasms in the search for sources of abiotic stress tolerance for breeding projects aimed at developing cultivars adapted to climate change scenarios where drought and high temperatures occur simultaneously. Full article

Rice is a staple food for over half of the world’s population, and it is grown in over 100 countries. Rice blast disease can cause 10% to 30% crop loss, enough to feed 60 million people. Breeding for resistance can help farmers avoid costly fungicides. This study assessed the relationship between rice blast disease and zinc or anthocyanin content in biofortified rice. Susceptibility to foliar and panicle blast was assessed in a rice panel which differed on grain zinc content and pigmentation. A rice panel (n = 23) was challenged with inoculum of two isolates of Magnaporthe oryzae in a screenhouse-based assay. The zinc content with foliar blast severity was analyzed in the leaves and grain of a subset of non-inoculated rice plants. The effect of foliar zinc supplementation on seedlings was assessed by varying levels of zinc fertilizer solution on four blast susceptible cultivars at 14 days after planting (DAP), followed by inoculation with the blast pathogen at 21 DAP. Foliar blast severity was scored on a 0–9 scale at 7 days after inoculation. The rice panel was scored for anthocyanin content, and the data were correlated with foliar blast severity. The panel was grown in the field, and panicle blast, grain yield and yield-related agronomic traits were measured. Significant differences were observed in foliar blast severity among the rice genotypes, with IRBLK-KA and IR96248-16-2-3-3-B having mean scores greater than 4, as well as BASMATI 370 (a popular aromatic variety), while the rest of the genotypes were resistant. Supplementation with foliar zinc led to a significant decrease in susceptibility. A positive correlation was observed between foliar and panicle blast. The Zn in the leaves was negatively correlated with foliar blast severity, and had a marginally positive correlation with panicle blast. There was no relationship between foliar blast severity and anthocyanin content. Grain yield had a negative correlation with panicle blast, but no correlation was observed between Zn in the grain and grain yield. This study shows that Zn biofortification in the grain may not enhance resistance to foliar and panicle blast. Furthermore, the zinc-biofortified genotypes were not agronomically superior to the contemporary rice varieties. There is a need to apply genomic selection to combine promising alleles into adapted rice genetic backgrounds. Full article

To address the challenges of inadequate adaptability, insufficient power, high ground clearance, and limited functionality in existing pineapple field machinery, this study proposes a height-adjustable pineapple field management platform based on previously established cultivation patterns and agronomic requirements. The structural configuration and operational principles of the platform’s power chassis are elucidated, with specific emphasis on the development of the traction power system and modular operational systems. Theoretical and experimental analyses of steering parameters, stability, and field performance were conducted. Finite element simulation analysis of the frame revealed that under full-load conditions, the equivalent elastic strains during descent and ascent phases were 0.000317 and 0.00125, respectively. Maximum equivalent stresses (48.27 MPa and 231.6 MPa for descent and ascent, respectively) were localized at the beam–plate junctions, while peak deformations of 1.14 mm (descent) and 4.31 mm (ascent) occurred at mid-frame and posterior–mid regions, respectively. Field validation demonstrated operational velocities of 0.16–1.77 m/s (forward) and 0.11–0.28 m/s (reverse), with a maximum gradability of 20°. The platform exhibited multifunctional capabilities including weeding, spraying, fertilization, flower induction, harvesting, and transportation, demonstrating its potential to fulfill the operational requirements for pineapple field management. Simultaneously, the overall work efficiency is increased by more than 50%, compared to manual labor. Full article

Morkhor 60-3 is an upland rice variety primarily cultivated in northeastern Thailand. This glutinous rice is valued for its adaptability and rich aroma but remains susceptible to significant diseases, particularly blast and bacterial blight. Using resistant varieties represents the most cost-effective approach to address this limitation. This study incorporated the QTLs/genetic markers qBl1, qBl2, and xa5 from Morkhor 60-1 through marker-assisted backcrossing. From the BC₁F₃ population, ten lines were selected based on their parentage and evaluated for blast resistance using a spray inoculation method with 12 isolates of Pyricularia oryzae, and for bacterial blight (BB) resistance using a leaf-clipping method with nine isolates of Xanthomonas oryzae pv. oryzae. Broad-spectrum resistance (BSR) was also assessed in the lines for both diseases. Subsequently, BC₁F₄ lines were evaluated for field performance, including agronomic traits and aroma. Results identified three superior lines, BC₁F₄ 22-7-140-4, BC₁F₄ 22-7-322-5, and BC₁F₄ 22-7-311-9, that demonstrated resistance to both BB and blast pathogens with average BSR values of 0.61 and 1.00, 0.66 and 1.00, and 0.55 and 0.87, respectively. These lines also exhibited enhanced performance in flowering date, plant height, panicle number per plant, grain number per plant, and grain weight. These findings demonstrate the effectiveness of marker-assisted selection (MAS) for gene pyramiding in rice improvement. Full article

Black elder (Sambucus nigra L.) is a temperate shrub with flowers and fruits that are edible after processing. This species is not yet widely known in the global agricultural sector, but its adaptability and drought tolerance may generate more interest in this crop. Our study aimed to find suitable micropropagation techniques for the black elder ‘Albida’ and compare suitable statistical methods for evaluating multiplication and rooting. For micropropagation, we tested the Murashige and Skoog (MS) growth medium with selected auxins and cytokinins. Five proliferation MS media containing 1, 2, and 4 mg/L BAP or 0.5 and 1 mg/L TDZ were tested. To induce root formation, three types of auxins were tested at a concentration of 1 mg/L in a 50% MS medium: IBA, IAA, and NAA. Data analysis was performed using different parametric and nonparametric tests to robustly capture the effects of treatments across varying distributional scenarios in developing explants subjected to the interactions of internal native and externally added plant growth regulators. The average multiplication rate ranged from 1.6 to 2.0 shoots per explant. High multiplication was recorded on the MS medium with 1 mg/L 6-benzylaminopurine. The root number per rooted explant was highly variable, ranging from 3.0 to 12.0 roots per explant. The highest average root number result was observed when 1 mg/L α-naphthalenacetic acid was used. All rooted plants were successfully acclimated to normal growing conditions. This in vitro propagation protocol allows for the production of hundreds to thousands of rooted plants from one initial explant within one year, enabling faster introduction to the agronomic sector. Full article

Drought severely limits crop yield every year, making it critical to clarify the genetic basis of drought tolerance for breeding of improved varieties. As drought tolerance is a complex quantitative trait, we analyzed three phenotypic groups: (1) agronomic traits under well-watered (WW) and water-deficit (WD) conditions, (2) stress tolerance indices of these traits, and (3) phenotypic plasticity, using a multi-parent doubled haploid (DH) population assessed in multi-environment trials. Genome-wide association studies (GWAS) identified 130, 171, and 71 quantitative trait loci (QTL) for the three groups of phenotypes, respectively. Only one QTL was shared among all trait groups, 25 between stress indices and agronomic traits, while the majority of QTL were specific to their group. Functional annotation of candidate genes revealed distinct pathways of the three phenotypic groups. Candidate genes under WD conditions were enriched for stress response and epigenetic regulation, while under WW conditions for protein synthesis and transport, RNA metabolism, and developmental regulation. Stress tolerance indices were enriched for transport of amino/organic acids, epigenetic regulation, and stress response, whereas plasticity showed enrichment for environmental adaptability. Transcriptome analysis of 26 potential candidate genes showed tissue-specific drought responses in leaves, ears, and tassels. Collectively, these results indicated both shared and independent genetic mechanisms underlying drought tolerance, providing novel insights into the complex phenotypes related to drought tolerance and guiding further strategies for molecular breeding in maize. Full article

Drought including both meteorological drought and water deficiency stress conditions is a major constraint on global agricultural productivity, particularly affecting Brassica species, which are vital oilseed and vegetable crops. As climate change intensifies, understanding plant responses to drought is crucial for improving drought resilience. Drought stress impacts Brassica crops at multiple levels, reducing germination rates, impairing physiological functions such as photosynthesis and water-use efficiency, and triggering oxidative stress due to the accumulation of reactive oxygen species. To counteract these effects, Brassica plants employ various adaptive mechanisms, including osmotic adjustment, antioxidant defense activation, and hormonal regulation. Recent research has explored molecular and physiological pathways involved in drought tolerance, revealing key physiological changes and biochemical markers that could be targeted for crop improvement. This review summarizes the latest findings on the physiological, biochemical, and molecular responses of Brassica crops to drought stress, with an emphasis on adaptive mechanisms and potential drought mitigation strategies. Additionally, future research directions are proposed, focusing on integrating molecular and agronomic approaches to enhance drought resilience in Brassica species. Full article